The type legalizer will scalarize vector conversions from integer to floating
point if the source element size is less than that of the result.
This is avoided now by inserting a zero/sign-extension of the source vector
before type legalization.
Review: Ulrich Weigand
Differential revision: https://reviews.llvm.org/D75978
Swap the compare operands if LHS is spilled while updating the CCMask:s of
the CC users. This is relatively straight forward since the live-in lists for
the CC register can be assumed to be correct during register allocation
(thanks to 659efa2).
Also fold a spilled operand of an LOCR/SELR into an LOC(G).
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D67437
On SystemZ there are a set of "access registers" that can be copied in and
out of 32-bit GPRs with special instructions. These instructions can only
perform the copy using low 32-bit parts of the 64-bit GPRs. However, the
default register class for 32-bit integers is GRX32, which also contains the
high 32-bit part registers.
In order to never end up with a case of such a COPY into a high reg, this
patch adds a new simple pre-RA pass that selects such COPYs into target
instructions.
This pass also handles COPYs from CC (Condition Code register), and COPYs to
CC can now also be emitted from a high reg in copyPhysReg().
Fixes: https://bugs.llvm.org/show_bug.cgi?id=44254
Review: Ulrich Weigand.
Differential Revision: https://reviews.llvm.org/D75014
The incoming back chain slot was implicitly allocated whenever a GPR was
saved in SystemZFrameLowering::getRegSpillOffset(), but in cases where no
GPRs were saved/restored this did not take effect.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D75367
Forming subtract with overflow is beneficial on SystemZ, just like additions.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D75290
In order to build the Linux kernel, the back chain must be supported with
packed-stack. The back chain is then stored topmost in the register save
area.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D74506
isKnownNonNaN() could not recognize a zero splat because that is a
ConstantAggregateZero which is-a ConstantData but not a ConstantDataVector.
Patch makes a ConstantAggregateZero return true.
Review: Thomas Lively
Differential Revision: https://reviews.llvm.org/D74263
Summary:
Backends should fold the subtraction into the comparison, but not all
seem to. Moreover, on targets where pointers are not integers, such as
CHERI, an integer subtraction is not appropriate. Instead we should just
compare the two pointers directly, as this should work everywhere and
potentially generate more efficient code.
Reviewers: bogner, lebedev.ri, efriedma, t.p.northover, uweigand, sunfish
Reviewed By: lebedev.ri
Subscribers: dschuff, sbc100, arichardson, jgravelle-google, hiraditya, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74454
This reverts commit 80a34ae311 with fixes.
Previously, since bots turning on EXPENSIVE_CHECKS are essentially turning on
MachineVerifierPass by default on X86 and the fact that
inline-asm-avx-v-constraint-32bit.ll and inline-asm-avx512vl-v-constraint-32bit.ll
are not expected to generate functioning machine code, this would go
down to `report_fatal_error` in MachineVerifierPass. Here passing
`-verify-machineinstrs=0` to make the intent explicit.
This reverts commit 80a34ae311 with fixes.
On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll
This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.
There are issues to be investigated for polly bots and bots turning on
EXPENSIVE_CHECKS.
When more than one SelectPseudo instruction is handled a new MBB is
returned. This must not be done if that would result in leaving an undhandled
isel pseudo behind in the original MBB.
Fixes https://bugs.llvm.org/show_bug.cgi?id=44849.
Review: Ulrich Weigand
Differential Revision: https://reviews.llvm.org/D74352
Each function is with this compiled with the SystemZSubtarget initialized
from the functions attributes.
Review: Ulrich Weigand.
Differential Revision: https://reviews.llvm.org/D74086
This change implements the llvm intrinsic llvm.read_register for
the SystemZ platform which returns the value of the specified
register
(http://llvm.org/docs/LangRef.html#llvm-read-register-and-llvm-write-register-intrinsics).
This implementation returns the value of the stack register, and
can be extended to return the value of other registers. The
implementation for this intrinsic exists on various other platforms
including Power, x86, ARM, etc. but missing on SystemZ.
Reviewers: uweigand
Differential Revision: https://reviews.llvm.org/D73378
Printing floating point number in decimal is inconvenient for humans.
Verbose asm output will print out floating point values in comments, it
helps.
But in lots of cases, users still need additional work to covert the
decimal back to hex or binary to check the bit patterns,
especially when there are small precision difference.
Hexadecimal form is one of the supported form in LLVM IR, and easier for
debugging.
This patch try to print all FP constant in hex form instead.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D73566
The "{=v0}" constraint did not result in the expected error message in the
abscence of the vector facility, because 'v0' matches as a string into the
AnyRegBitRegClass in common code.
This patch adds checks for vector support in case of "{v" and soft-float in
case of "{f" to remedy this.
Review: Ulrich Weigand.
These names have been changed from CamelCase to camelCase, but there were
many places (comments mostly) that still used the old names.
This change is NFC.
Summary:
This patch could be treated as a rebase of D33960. It also fixes PR35547.
A fix for `llvm/test/Other/close-stderr.ll` is proposed in D68164. Seems
the consensus is that the test is passing by chance and I'm not
sure how important it is for us. So it is removed like in D33960 for now.
The rest of the test fixes are just adding `--crash` flag to `not` tool.
** The reason it fixes PR35547 is
`exit` does cleanup including calling class destructor whereas `abort`
does not do any cleanup. In multithreading environment such as ThinLTO or JIT,
threads may share states which mostly are ManagedStatic<>. If faulting thread
tearing down a class when another thread is using it, there are chances of
memory corruption. This is bad 1. It will stop error reporting like pretty
stack printer; 2. The memory corruption is distracting and nondeterministic in
terms of error message, and corruption type (depending one the timing, it
could be double free, heap free after use, etc.).
Reviewers: rnk, chandlerc, zturner, sepavloff, MaskRay, espindola
Reviewed By: rnk, MaskRay
Subscribers: wuzish, jholewinski, qcolombet, dschuff, jyknight, emaste, sdardis, nemanjai, jvesely, nhaehnle, sbc100, arichardson, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, lenary, s.egerton, pzheng, cfe-commits, MaskRay, filcab, davide, MatzeB, mehdi_amini, hiraditya, steven_wu, dexonsmith, rupprecht, seiya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D67847
Code in getRoot made the assumption that every node in PendingLoads
must always itself have a dependency on the current DAG root node.
After the changes in 04a8696, it turns out that this assumption no
longer holds true, causing wrong codegen in some cases (e.g. stores
after constrained FP intrinsics might get deleted).
To fix this, we now need to make sure that the TokenFactor created
by getRoot always includes the previous root, if there is no implicit
dependency already present.
The original getControlRoot code already has exactly this check,
so this patch simply reuses that code now for getRoot as well.
This fixes the regression.
NFC if no constrained FP intrinsic is present.
We need to ensure that fpexcept.strict nodes are not optimized away even if
the result is unused. To do that, we need to chain them into the block's
terminator nodes, like already done for PendingExcepts.
This patch adds two new lists of pending chains, PendingConstrainedFP and
PendingConstrainedFPStrict to hold constrained FP intrinsic nodes without
and with fpexcept.strict markers. This allows not only to solve the above
problem, but also to relax chains a bit further by no longer flushing all
FP nodes before a store or other memory access. (They are still flushed
before nodes with other side effects.)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D72341
SystemZDAGToDAGISel::Select will attempt to split logical instruction
with a large immediate constant. This must not happen if the result
matches one of the z15 combined operations, so the code checks for
those. However, one of them was missed, causing invalid code to
be generated in the test case for PR44496.
Fix several several additional problems with the int <-> FP conversion
logic both in common code and in the X86 target. In particular:
- The STRICT_FP_TO_UINT expansion emits a floating-point compare. This
compare can raise exceptions and therefore needs to be a strict compare.
I've made it signaling (even though quiet would also be correct) as
signaling is the more usual default for an LT. This code exists both
in common code and in the X86 target.
- The STRICT_UINT_TO_FP expansion algorithm was incorrect for strict mode:
it emitted two STRICT_SINT_TO_FP nodes and then used a select to choose one
of the results. This can cause spurious exceptions by the STRICT_SINT_TO_FP
that ends up not chosen. I've fixed the algorithm to use only a single
STRICT_SINT_TO_FP instead.
- The !isStrictFPEnabled logic in DoInstructionSelection would sometimes do
the wrong thing because it calls getOperationAction using the result VT.
But for some opcodes, incuding [SU]INT_TO_FP, getOperationAction needs to
be called using the operand VT.
- Remove some (obsolete) code in X86DAGToDAGISel::Select that would mutate
STRICT_FP_TO_[SU]INT to non-strict versions unnecessarily.
Reviewed by: craig.topper
Differential Revision: https://reviews.llvm.org/D71840
The SELR(Mux) instructions can be converted to two-address form as LOCR(Mux)
instructions whenever one of the sources are the same reg as dest. By adding
this mapping in getTwoOperandOpcode(), we get:
- Two-address hints in getRegAllocationHints() for select register
instructions.
- No need anymore for special handling in SystemZShortenInst.cpp -
shortenSelect() removed.
The two-address hints are now added before the GRX32 hints, which should be
preferred.
Review: Ulrich Weigand
https://reviews.llvm.org/D68870
It was recently discovered that the handling of CC values was actually broken
since overflow was not properly handled ('nsw' flag not checked for).
Add and sub instructions now have a new target specific instruction flag
named SystemZII::CCIfNoSignedWrap. It means that the CC result can be used
instead of a compare with 0, but only if the instruction has the 'nsw' flag
set.
This patch also adds the improvements of conversion to logical instructions
and the analyzing of add with immediates, to be able to eliminate more
compares.
Review: Ulrich Weigand
https://reviews.llvm.org/D66868
The back-end currently has special DAGCombine code to detect
cases where two floating-point extend or truncate operations
can be combined into a single vector operation.
This patch extends that support to also handle strict FP operations.
Note that currently only the case where both operations have the
same input chain are supported. This already suffices to cover
the common case where the operations result from scalarizing a
non-legal vector type. More general cases can be supported in
the future.
Add new intrinsics
llvm.experimental.constrained.minimum
llvm.experimental.constrained.maximum
as strict versions of llvm.minimum and llvm.maximum.
Includes SystemZ back-end support.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D71624
Let the "mnop-mcount" function attribute simply be present or non-present.
Update SystemZ backend as well to use hasFnAttribute() instead.
Review: Ulrich Weigand
https://reviews.llvm.org/D71669
The following intrinsics currently carry a rounding mode metadata argument:
llvm.experimental.constrained.minnum
llvm.experimental.constrained.maxnum
llvm.experimental.constrained.ceil
llvm.experimental.constrained.floor
llvm.experimental.constrained.round
llvm.experimental.constrained.trunc
This is not useful since the semantics of those intrinsics do not in any way
depend on the rounding mode. In similar cases, other constrained intrinsics
do not have the rounding mode argument. Remove it here as well.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D71218
As of b1d8576 there is middle-end support for STRICT_[SU]INT_TO_FP,
so this patch adds SystemZ back-end support as well.
The patch is SystemZ target specific except for adding SD patterns
strict_[su]int_to_fp and any_[su]int_to_fp to TargetSelectionDAG.td
as usual.
Now that the machine verifier will check for cases of register/immediate
MachineOperands and their correspondence to the MC instruction descriptor,
this patch adds the operand types to the descriptors where they were
previously missing. All MCOI::OPERAND_UNKNOWN operand types have been handled
to get a known type, except for G_... (global isel) instructions.
Review: Ulrich Weigand
https://reviews.llvm.org/D71494
Any llvm function with the "packed-stack" attribute will be compiled to use
the packed stack layout which reuses unused parts of the incoming register
save area. This is needed for building the Linux kernel.
Review: Ulrich Weigand
https://reviews.llvm.org/D70821
Before z14, we did not have any FMA instruction for 128-bit
floating-point, so the @llvm.fma.f128 intrinsic needs to be
expanded to a libcall on those platforms.
This worked correctly for regular FMA, but was implemented
incorrectly for the strict version. This was not noticed
because we did not have test coverage for this case.
This patch fixes that incorrect expansion and adds the
missing test cases.
This adds support for constrained floating-point comparison intrinsics.
Specifically, we add:
declare <ty2>
@llvm.experimental.constrained.fcmp(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
declare <ty2>
@llvm.experimental.constrained.fcmps(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
The first variant implements an IEEE "quiet" comparison (i.e. we only
get an invalid FP exception if either argument is a SNaN), while the
second variant implements an IEEE "signaling" comparison (i.e. we get
an invalid FP exception if either argument is any NaN).
The condition code is implemented as a metadata string. The same set
of predicates as for the fcmp instruction is supported (except for the
"true" and "false" predicates).
These new intrinsics are mapped by SelectionDAG codegen onto two new
ISD opcodes, ISD::STRICT_FSETCC and ISD::STRICT_FSETCCS, again
representing quiet vs. signaling comparison operations. Otherwise
those nodes look like SETCC nodes, with an additional chain argument
and result as usual for strict FP nodes. The patch includes support
for the common legalization operations for those nodes.
The patch also includes full SystemZ back-end support for the new
ISD nodes, mapping them to all available SystemZ instruction to
fully implement strict semantics (scalar and vector).
Differential Revision: https://reviews.llvm.org/D69281
Jonas Paulsson