The changes made in r269352, r269353 and r269354 to support the
transformation of the ldr rd,=immediate to mov introduced a regression
from 3.8 (ldr.w rd, =immediate) not supported.
This change puts support back in for ldr.w by means of a t2InstAlias for
the .w form. The .w is ignored in ARM state and propagated to the ldr in
Thumb2.
llvm-svn: 281319
descriptions now tag add instructions, and the Hexagon backend is using this to
identify loop induction statements.
Patch by Sam Parker and Sjoerd Meijer.
Differential Revision: https://reviews.llvm.org/D23601
llvm-svn: 281304
Created a Thumb2 predicated pattern matcher that uses Thumb2 and
HasT2ExtractPack and used it to redefine the patterns for sxta{b|h}
and uxta{b|h}. Also used the similar patterns to fill in isel pattern
gaps for the corresponding instructions in the ARM backend.
The patch is mainly changes to tests since most of this functionality
appears not to have been tested.
Differential Revision: https://reviews.llvm.org/D23273
llvm-svn: 278207
Added (sra (shl x, 16), 16) to the sext_16_node PatLeaf for ARM to
simplify some pattern matching. This has allowed several patterns
for smul* and smla* to be removed as well as making it easier to add
the matching for the corresponding instructions for Thumb2 targets.
Also added two Pat classes that are predicated on Thumb2 with the
hasDSP flag and UseMulOps flags. Updated the smul codegen test with
the wider range of patterns plus the ThumbV6 and ThumbV6T2 targets.
Differential Revision: https://reviews.llvm.org/D22908
llvm-svn: 277450
Summary:
Commit 276701 requires that targets have the DSP extensions to use
certain saturating instructions. This requires some corrections.
For ARM ISA the instructions in question are available in all v6*
architectures.
For Thumb2, the instructions in question are available from v6T2.
SSAT and USAT are part of the base architecture while SSAT16 and
USAT16 require the DSP extensions.
Reviewers: rengolin
Subscribers: aemerson, rengolin, samparker, llvm-commits
Differential Revision: https://reviews.llvm.org/D23010
llvm-svn: 277439
This option, compatible with gas's -mimplicit-it, controls the
generation/checking of implicit IT blocks in ARM/Thumb assembly.
This option allows two behaviours that were not possible before:
- When in ARM mode, emit a warning when assembling a conditional
instruction that is not in an IT block. This is enabled with
-mimplicit-it=never and -mimplicit-it=thumb.
- When in Thumb mode, automatically generate IT instructions when an
instruction with a condition code appears outside of an IT block. This
is enabled with -mimplicit-it=thumb and -mimplicit-it=always.
The default option is -mimplicit-it=arm, which matches the existing
behaviour (allow conditional ARM instructions outside IT blocks without
warning, and error if a conditional Thumb instruction is outside an IT
block).
The general strategy for generating IT blocks in Thumb mode is to keep a
small list of instructions which should be in the IT block, and only
emit them when we encounter something in the input which means we cannot
continue the block. This could be caused by:
- A non-predicable instruction
- An instruction with a condition not compatible with the IT block
- The IT block already contains 4 instructions
- A branch-like instruction (including ALU instructions with the PC as
the destination), which cannot appear in the middle of an IT block
- A label (branching into an IT block is not legal)
- A change of section, architecture, ISA, etc
- The end of the assembly file.
Some of these, such as change of section and end of file, are parsed
outside of the ARM asm parser, so I've added a new virtual function to
AsmParser to ensure any previously-parsed instructions have been
emitted. The ARM implementation of this flushes the currently pending IT
block.
We now have to try instruction matching up to 3 times, because we cannot
know if the current IT block is valid before matching, and instruction
matching changes depending on the IT block state (due to the 16-bit ALU
instructions, which set the flags iff not in an IT block). In the common
case of not having an open implicit IT block and the instruction being
matched not needing one, we still only have to run the matcher once.
I've removed the ITState.FirstCond variable, because it does not store
any information that isn't already represented by CurPosition. I've also
updated the comment on CurPosition to accurately describe it's meaning
(which this patch doesn't change).
Differential Revision: https://reviews.llvm.org/D22760
llvm-svn: 276747
The saturation instructions appeared in v6T2, with DSP extensions, but they
were being accepted / generated on any, with the new introduction of the
saturation detection in the back-end. This commit restricts the usage to
DSP-enable only cores.
Fixes PR28607.
llvm-svn: 276701
Follow up to r276624. Changes bits 22-20 to be parameters to
instruction class.
Differential Revision: https://reviews.llvm.org/D22562
llvm-svn: 276626
Recommitting after r274347 was reverted. This patch introduces some
classes to refactor the 3 and 4 register Thumb2 multiplication
instruction descriptions, plus improved tests for some of those
instructions.
Differential Revision: https://reviews.llvm.org/D21929
llvm-svn: 275979
Immediate branch targets aren't commonly used, but if they are we should make
sure they can actually be encoded. This means they must be divisible by 2 when
targeting Thumb mode, and by 4 when targeting ARM mode.
Also do a little naming cleanup while I was changing everything around anyway.
llvm-svn: 275116
No functional changes. Just created wrapper classes around the 3
and 4 reg mult and mac instruction classes.
Differential Revision: http://reviews.llvm.org/D21549
llvm-svn: 274347
Summary:
SSAT saturates an integer, making sure that its value lies within
an interval [-k, k]. Since the constant is given to SSAT as the
number of bytes set to one, k + 1 must be a power of 2, otherwise
the optimization is not possible. Also, the select_cc must use <
and > respectively so that they define an interval.
Reviewers: mcrosier, jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D21372
llvm-svn: 273581
TargetLowering and DAGToDAG are used to combine ADDC, ADDE and UMLAL
dags into UMAAL. Selection is split into the two phases because it
is easier to match the two patterns at those different times.
Differential Revision: http://http://reviews.llvm.org/D21461
llvm-svn: 273165
The MSR instructions can write to the CPSR, but we did not model this
fact, so we could emit them in the middle of IT blocks, changing the
condition flags for later instructions in the block.
The tests use two calls to llvm.write_register.i32 because it is valid
to use these instructions at the end of an IT block, which if conversion
does do in some cases. With two calls, the first clobbers the flags, so
a branch has to be used to make the second one conditional.
Differential Revision: http://reviews.llvm.org/D21139
llvm-svn: 272154
new instruction to ARM and AArch64 targets and several system registers.
Patch by: Roger Ferrer Ibanez and Oliver Stannard
Differential Revision: http://reviews.llvm.org/D20282
llvm-svn: 271670
forces having special checks in ArmInstPrinter::printInstruction. This
patch addresses this issue.
Not all special checks could be removed: either they involve elaborated
conditions under which the alias is emitted (e.g. ldm/stm on sp may be
pop/push but only if the number of registers is >= 2) or the number
of registers is multivalued (like happens again with ldm/stm) and they
do not match the InstAlias pattern which assumes single-valued operands
in the pattern.
Patch by: Roger Ferrer Ibanez
Differential Revision: http://reviews.llvm.org/D20237
llvm-svn: 271667
Added support to map intrinsics
__builtin_arm_{ldc,ldcl,ldc2,ldc2l,stc,stcl,stc2,stc2l}
to their ARM instructions.
Differential Revision: http://reviews.llvm.org/D20564
llvm-svn: 271271
This change adds a new constant pool kind to ARMOperand. When parsing the
operand for =immediate we create an instance of this operand rather than
creating a constant pool entry and rewriting the operand.
As the new operand kind is only created for ldr rt,= we can make ldr rt,=
an explicit pseudo instruction in ARM, Thumb and Thumb2
The pseudo instruction is expanded in processInstruction(). This creates the
constant pool and transforms the pseudo instruction into a pc-relative ldr to
the constant pool.
There are no functional changes and no modifications needed to existing tests.
Required by the patch that fixes PR25722.
Patch by Peter Smith.
llvm-svn: 269352
Add support for TLS access for Windows on ARM. This generates a similar access
to MSVC for ARM.
The changes to the tablegen data is needed to support loading an external symbol
global that is not for a call. The adjustments to the DAG to DAG transforms are
needed to preserve the 32-bit move.
llvm-svn: 259676
This patch was originally committed as r257883, but was reverted due to windows
failures. The cause of these failures has been fixed under r258677, hence
re-committing the original patch.
llvm-svn: 258681
When the shift immediate is zero, PKHTB is an alias for PKHBT, but the order of
the input operands needs to be swapped.
Differential Revision: http://reviews.llvm.org/D16288
llvm-svn: 258044
Darwin TLS accesses most closely resemble ELF's general-dynamic situation,
since they have to be able to handle all possible situations. The descriptors
and so on are obviously slightly different though.
llvm-svn: 257039
Summary:
r250697 fixed the mapping for ARM mode. We have to do the same for Thumb2 otherwise the same llvm.arm.ssat() will generate different saturating amount for ARM and Thumb.
r250697: http://reviews.llvm.org/rL250697
Reviewers: rmaprath
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D15653
llvm-svn: 256115
These were the cause of a verifier error when building 7zip with
-verify-machineinstrs. Running 'make check' with the verifier
triggered the same error on the test here so i've updated the test
to run the verifier on one of its runs instead of adding a new one.
While looking at this code, there was a stale comment that these
instructions were only used for disassembly. This probably used to
be the case, but they are now used in the 'ARM load / store optimization pass' too.
This reapplies r242300 which was reverted in r242428 due to bot failures.
Ultimately those failures were spurious and completely unrelated to this commit. I reverted this
at the time because it was thought to be at fault.
llvm-svn: 250969
Currently, the availability of DSP instructions (ACLE 6.4.7) is handled in a
hand-rolled tricky condition block in tools/clang/lib/Basic/Targets.cpp, with
a FIXME: attached.
This patch changes the handling of +t2dsp to be in line with other
architecture extensions.
Following a revert of r248152 and new review comments, this patch also includes
renaming FeatureDSPThumb2 -> FeatureDSP, hasThumb2DSP() -> hasDSP(), etc.
The spelling of "t2dsp" is preserved, pending a further investigation of its
possible external usage.
Differential Revision: http://reviews.llvm.org/D12937
llvm-svn: 248519
SelectT2ShifterOperandReg has identical behaviour to SelectImmShifterOperand,
so get rid of it and use SelectImmShifterOperand instead.
Differential Revision: http://reviews.llvm.org/D12195
llvm-svn: 246962
This reverts commit r242300.
This is causing buildbot failures which we are investigating.
I'll reapply once we know whats going on, but for now want to
get the bots green.
llvm-svn: 242428
These were the cause of a verifier error when building 7zip with
-verify-machineinstrs. Running 'make check' with the verifier
triggered the same error on the test here so i've updated the test
to run the verifier on one of its runs instead of adding a new one.
While looking at this code, there was a stale comment that these
instructions were only used for disassembly. This probably used to
be the case, but they are now used in the 'ARM load / store optimization pass' too.
llvm-svn: 242300
The original version didn't properly account for the base register
being modified before the final jump, so caused miscompilations in
Chromium and LLVM. I've fixed this and tested with an LLVM self-host
(I don't have the means to build & test Chromium).
The general idea remains the same: in pathological cases jump tables
can be too far away from the instructions referencing them (like other
constants) so they need to be movable.
Should fix PR23627.
llvm-svn: 238680
Previously, they were forced to immediately follow the actual branch
instruction. This was usually OK (the LEAs actually accessing them got emitted
nearby, and weren't usually separated much afterwards). Unfortunately, a
sufficiently nasty phi elimination dumps many instructions right before the
basic block terminator, and this can increase the range too much.
This patch frees them up to be placed as usual by the constant islands pass,
and consequently has to slightly modify the form of TBB/TBH tables to refer to
a PC-relative label at the final jump. The other jump table formats were
already position-independent.
rdar://20813304
llvm-svn: 237590
Sjoerd Meijer