@stella.stamenova found out that lldb-vscode's Win32 macros were failing
when building on windows targetings POSIX platforms.
I'm changing these macros for LLVM_ON_UNIX, which should be more
accurate.
stella.stemenova mentioned in https://reviews.llvm.org/D93951 failures on Windows for this test.
I'm fixing the macro definitions and disabling the tests for python
versions lower than 3.7. I'll figure out that actual issue with
python3.6 after the buildbots are fine again.
Depends on D93874.
runInTerminal was using --wait-for, but it was some problems because it uses process polling looking for a single instance of the debuggee:
- it gets to know of the target late, which renders breakpoints in the main function almost impossible
- polling might fail if there are already other processes with the same name
- polling might also fail on some linux machine, as it's implemented with the ps command, and the ps command's args and output are not standard everywhere
As a better way to implement this so that it works well on Darwin and Linux, I'm using now the following process:
- lldb-vscode notices the runInTerminal, so it spawns lldb-vscode with a special flag --launch-target <target>. This flags tells lldb-vscode to wait to be attached and then it execs the target program. I'm using lldb-vscode itself to do this, because it makes finding the launcher program easier. Also no CMAKE INSTALL scripts are needed.
- Besides this, the debugger creates a temporary FIFO file where the launcher program will write its pid to. That way the debugger will be sure of which program to attach.
- Once attach happend, the debugger creates a second temporary file to notify the launcher program that it has been attached, so that it can then exec. I'm using this instead of using a signal or a similar mechanism because I don't want the launcher program to wait indefinitely to be attached in case the debugger crashed. That would pollute the process list with a lot of hanging processes. Instead, I'm setting a 20 seconds timeout (that's an overkill) and the launcher program seeks in intervals the second tepmorary file.
Some notes:
- I preferred not to use sockets because it requires a lot of code and I only need a pid. It would also require a lot of code when windows support is implemented.
- I didn't add Windows support, as I don't have a windows machine, but adding support for it should be easy, as the FIFO file can be implemented with a named pipe, which is standard on Windows and works pretty much the same way.
The existing test which didn't pass on Linux, now passes.
Differential Revision: https://reviews.llvm.org/D93951
Having this 4MB buffer with a compile-time initialized string forced it
into the DATA section and it took up 4MB of space in the binary, which
accounts for like 80% of debugserver's footprint on disk. Change it to
BSS and strcpy in the initial value at runtime instead.
<rdar://problem/73503892>
lldb-vsdode was communicating the list of modules to the IDE with events, which in practice ended up having some drawbacks
- when debugging large targets, the number of these events were easily 10k, which polluted the messages being transmitted, which caused the following: a harder time debugging the messages, a lag after terminated the process because of these messages being processes (this could easily take several seconds). The latter was specially bad, as users were complaining about it even when they didn't check the modules view.
- these events were rarely used, as users only check the modules view when something is wrong and they try to debug things.
After getting some feedback from users, we realized that it's better to not used events but make this simply a request and is triggered by users whenever they needed.
This diff achieves that and does some small clean up in the existing code.
Differential Revision: https://reviews.llvm.org/D94033
Debugging app launch/attach failures can be difficult because of
all of the messages logged to the console on a darwin system;
emitting specific messages around critical API calls can make it
easier to narrow the search for the console messages related to
the failure.
<rdar://problem/67220442>
Differential revision: https://reviews.llvm.org/D94357
- Remove unused plists that were referenced (but unused) by Xcode.
- Move all debugserver plists unders tools/debugserver/resources.
- Add the ability to distinguish between com.apple.security.cs.debugger
and com.apple.private.cs.debugger.
rdar://66082043
Differential revision: https://reviews.llvm.org/D94320
Add stN aliases for the FPU (stmmN) registers on MacOSX. This should
improve compatibility between MacOSX and other platforms, and partially
fix x86*-fp-write tests without having to duplicate them. Note that
the tests are currently still broken due to ftag incompatibility.
Differential Revision: https://reviews.llvm.org/D91847
This patch introduces a LLDB_SCOPED_TIMER macro to hide the needlessly
repetitive creation of scoped timers in LLDB. It's similar to the
LLDB_LOG(F) macro.
Differential revision: https://reviews.llvm.org/D93663
Kill (rather than detach) form the inferior if debugserver loses its
connection to lldb to prevent zombie processes.
Differential revision: https://reviews.llvm.org/D92908
Use the newly added spawnattr API, posix_spawnattr_setarchpref_np, to
select a slice preferences per cpu and subcpu types, instead of just cpu
with posix_spawnattr_setarchpref_np.
rdar://16094957
Differential revision: https://reviews.llvm.org/D92712
Previously we used UINT16_MAX to mean no port/no specifc
port. This leads to confusion because 65535 is a valid
port number.
Instead use an optional. If you want a specific port call
LaunchGDBServer as normal, otherwise pass an empty optional
and it will be set to the port that gets chosen.
(or left empty in the case where we fail to find a port)
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D92035
Previously if you did:
$ lldb-server platform --server <...> --min-gdbserver-port 12346
--max-gdbserver-port 12347
(meaning only use port 12346 for gdbservers)
Then tried to launch two gdbservers on the same connection,
the second one would return port 65535. Which is a real port
number but it actually means lldb-server didn't find one it was
allowed to use.
send packet: $qLaunchGDBServer;<...>
read packet: $pid:1919;port:12346;#c0
<...>
send packet: $qLaunchGDBServer;<...>
read packet: $pid:1927;port:65535;#c7
This situation should be an error even if port 65535 does happen
to be available on the current machine.
To fix this make PortMap it's own class within
GDBRemoteCommunicationServerPlatform.
This almost the same as the old typedef but for
GetNextAvailablePort() returning an llvm::Expected.
This means we have to handle not finding a port,
by returning an error packet.
Also add unit tests for this new PortMap class.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91634
Adds a command line option that makes debugserver propagate the SIGSEGV
signal to the target process.
Motivation: I'm one of the maintainers of Delve [1] a debugger for Go.
We use debugserver as our backend on macOS and one of the most often
reported bugs is that, on macOS, we don't propagate SIGSEGV back to the
target process [2]. Sometimes some programs will actually cause a
SIGSEGV, by design, and then handle it. Those programs can not be
debugged at all.
Since catching signals isn't very important for a Go debugger I'd much
rather have a command line option in debugserver that causes it to let
SIGSEGV go directly to the target process.
[1] https://github.com/go-delve/delve/
[2] https://github.com/go-delve/delve/issues/852
Differential revision: https://reviews.llvm.org/D89315
On x86_64, when you hit a __builtin_debugtrap instruction, you
can continue past this in the debugger. This patch has debugserver
recognize the specific instruction used for __builtin_debugtrap
and advance the pc past it, so that the user can continue execution
once they've hit one of these.
In the patch discussion, we were in agreement that it would be better
to have this knowledge up in lldb instead of depending on each
stub rewriting the pc behind the debugger's back, but that's a
larger scale change for another day.
<rdar://problem/65521634>
Differential revision: https://reviews.llvm.org/D91238
This fixes a reproducer test failure that was caused by the undefined
order in which global destructors run. More concretely, the static
instance of the RealFileSystem had been destroyed before we finalized
the reproducer, which uses it to copy files into the reproducer. By
exiting normally, we call SBDebugger::Terminate and finalize the
reproducer before any static dtors are run.
For performance reasons the reproducers don't copy the files captured by
the file collector eagerly, but wait until the reproducer needs to be
generated.
This is a problematic when LLDB crashes and we have to do all this
signal-unsafe work in the signal handler. This patch uses a similar
trick to clang, which has the driver invoke a new cc1 instance to do all
this work out-of-process.
This patch moves the writing of the mapping file as well as copying over
the reproducers into a separate process spawned when lldb crashes.
Differential revision: https://reviews.llvm.org/D89600
The existing help text was very terse and was missing several important
options. In the new version, I add a short description of each option
and a slightly longer description of the tool as a whole.
The new option list does not include undocumented no-op options:
--debug and --verbose. It also does not include undocumented short
aliases for long options, with two exceptions: -h, because it's
well-known; and -S (--setsid), as it's used in one test. Using these
options will now produce an error. I believe that is acceptable as users
aren't generally invoking lldb-server directly, and the only way to
learn about the short aliases was by looking at the source.
Differential Revision: https://reviews.llvm.org/D89477
the xcode project file for debugserver exists only to make my
life easier when I'm working only on debugserver and don't need
to build the rest of llvm/lldb. It had many build configurations
to reflect our old lldb xcode project file, which is long gone.
Removing them to simplify the configurations.
Specifically dropping CustomSwift-Debug, DebugClang, DebugPresubmission,
CustomSwift-Release, BuildAndIntegration. Keeping Debug & Release.
Link against CarouselServices on watchos, recognize the
WatchComplicationLaunch launch flag option when that framework
is available.
<rdar://problem/62473967>, <rdar://problem/61230088>
Add a new FreeBSD Process plugin using client/server model. This plugin
is based on the one used by NetBSD. It currently supports a subset
of functionality for amd64. It is automatically used when spawning
lldb-server. It can also be used by lldb client by setting
FREEBSD_REMOTE_PLUGIN environment variable (to any value).
The code is capable of debugging simple single-threaded programs. It
supports general purpose, debug and FPU registers (up to XMM) of amd64,
basic signalling, software breakpoints.
Adding the support for the plugin involves removing some dead code
from FreeBSDPlatform plugin (that was not ever used because
CanDebugProcess() returned false), and replacing it with appropriate
code from NetBSD platform support.
Differential Revision: https://reviews.llvm.org/D88796
Per the DAP spec for SetBreakpoints [1], the way to clear breakpoints is: `To clear all breakpoint for a source, specify an empty array.`
However, leaving the breakpoints field unset is also a well formed request (note the `breakpoints?:` in the `SetBreakpointsArguments` definition). If it's unset, we have a couple choices:
1. Crash (current behavior)
2. Clear breakpoints
3. Return an error response that the breakpoints field is missing.
I propose we do (2) instead of (1), and treat an unset breakpoints field the same as an empty breakpoints field.
[1] https://microsoft.github.io/debug-adapter-protocol/specification#Requests_SetBreakpoints
Reviewed By: wallace, labath
Differential Revision: https://reviews.llvm.org/D88513
When running in an ipv6-only environment where `AF_INET` sockets are not available, many lldb tests (mostly gdb remote tests) fail because things like `127.0.0.1` don't work there.
Use `localhost` instead of `127.0.0.1` whenever possible, or include a fallback of creating `AF_INET6` sockets when `AF_INET` fails.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87333
Extract a function for turning `eLaunchFlavorDefault` into a concreate `eLaunchFlavor` value.
This new function encapsulates the few compile time variables involved, and also prevents clang unused code diagnostics.
Differential Revision: https://reviews.llvm.org/D87327
If our process terminates due to an unhandled signal, we are supposed to get the
signal code via WTERMSIG. However, we instead try to get the exit status via
WEXITSTATUS which just ends up always calculating signal code 0 (at least on the
macOS implementation where it just shifts the signal code bits away and we're
left with only 0 bits).
The exit status calculation on the LLDB side also seems a bit off as it claims
an exit status that is just the signal code (instead of for example 128 + signal
code), but that will be another patch.
Reviewed By: jasonmolenda
Differential Revision: https://reviews.llvm.org/D86336
Add a reproducer verifier that catches:
- Missing or invalid home directory
- Missing or invalid working directory
- Missing or invalid module/symbol paths
- Missing files from the VFS
The verifier is enabled by default during replay, but can be skipped by
passing --reproducer-no-verify.
Differential revision: https://reviews.llvm.org/D86497
The Symbol Status in modules view is simplified so that only when the module has debug info and its size is non-zero, will the status message be displayed. The symbol status message is renamed to debug info size and flag message like "Symbols not found" and "Symbols loaded" is deleted.
Differential Revision: https://reviews.llvm.org/D86662
This patch changes the command interpreter sourcing logic for the REPL
init file. Instead of looking for a arbitrary file name, it standardizes
the REPL init file name to match to following scheme:
`.lldbinit-<language>-repl`
This will make the naming more homogenous and the sourcing logic future-proof.
rdar://65836048
Differential Revision: https://reviews.llvm.org/D86987
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Add a reproducer verifier that catches:
- Missing or invalid home directory
- Missing or invalid working directory
- Missing or invalid module/symbol paths
- Missing files from the VFS
The verifier is enabled by default during replay, but can be skipped by
passing --reproducer-no-verify.
Differential revision: https://reviews.llvm.org/D86497
This patch removes the rather confusing LLDB_LIB_DIR and LLDB_IMPLIB_DIR
environment variables. They are confusing because LLDB_LIB_DIR would
point to the bin subdirectory in the build root while LLDB_IMPLIB_DIR
would point to the lib subdirectory. The reason far this was
LLDB.framework, which gets build under bin.
This patch replaces their uses with configuration.lldb_framework_path
and configuration.lldb_libs_dir respectively.
Differential revision: https://reviews.llvm.org/D86817
Always make lldb-argdumper a dependency of liblldb. Currently it is only
a dependency of the python swig target because of the relative symlink
in the python resource directory. That means that the dependency won't
be there when LLDB_ENABLE_PYTHON is disabled.
Differential revision: https://reviews.llvm.org/D86722
This patch adds the infrastructure to have language specific REPL init
files. It's the foundation work to a following patch that will introduce
Swift REPL init file.
When lldb is launched with the `--repl` option, it will look for a REPL
init file in the home directory and source it. This overrides the
default `~/.lldbinit`, which content might make the REPL behave
unexpectedly. If the REPL init file doesn't exists, lldb will fall back
to the default init file.
rdar://65836048
Differential Revision: https://reviews.llvm.org/D86242
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Only link against Python3_LIBRARY when LLDB_ENABLE_PYTHON is true. We
have to be more strict now becuase Python3_LIBRARY might be set to
NOTFOUND instead of being not set at all.
This patch is a big sed to rename the following variables:
s/PYTHON_LIBRARIES/Python3_LIBRARIES/g
s/PYTHON_INCLUDE_DIRS/Python3_INCLUDE_DIRS/g
s/PYTHON_EXECUTABLE/Python3_EXECUTABLE/g
s/PYTHON_RPATH/Python3_RPATH/g
I've also renamed the CMake module to better express its purpose and for
consistency with FindLuaAndSwig.
Differential revision: https://reviews.llvm.org/D85976
`lldb-server platform --socket-file /any/path` currently always fails to create
the socket file. This stopped working after D67424 which changed the
input variables of `writeFileAtomically` slightly. We're expected to
pass in a temporary path template (`/tmp/foo-%%%%%`) and the final
path we want to write. Instead we currently pass in the never set
`temp_file_path` as the temporary path (which will make this function always
fail) and pass in the temp_file_spec's path as the final path (which is actually
the template path such as `/tmp/foo-%%%%%`) instead of the actual path
we want to write (e.g. `/tmp/foo`).
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D85890
This patch configures LLDB.framework to build as a flat unversioned
framework on non-macOS Darwin targets, which have never supported the
macOS framework layout.
This patch also renames the 'IOS' cmake variable to 'APPLE_EMBEDDED' to
reflect the fact that lldb is built for several different kinds of embedded
Darwin targets, not just iOS.
Differential Revision: https://reviews.llvm.org/D85770
This patch is similar in spirit to https://reviews.llvm.org/D84480,
but does the maccatalyst/macosx disambiguation. I also took the
opportunity to factor out the gdb-remote packet log scanning used by
several testcases into lldbutil functions.
rdar://problem/66059257
Differential Revision: https://reviews.llvm.org/D84576
When lldb cannot find source file thus IDE renders a disassembly view, add syntax highlighting for constants, registers and final line comments for better debugging experience.
The original plain disassembly view looks like:
{F12401687}
An ideal view is like the screenshot attached.
{F12401515}
In this diff, the mimeType is a kind of media type for formatting the content in the response to a source request. Elements in the disassembly view, like constants, registers and final line comments are colored for highlighting.
A built-in support in the VSCode IDE for syntax highlighting will identify the which mimeType to apply and render the disassembly view as expected.
Reviewed By: wallace, clayborg
Differential Revision: https://reviews.llvm.org/D84555
On an iOS device, if debugserver is left to figure out how to launch
the binary provided, it looks at the filename to see if it contains
".app" and asks FrontBoard to launch it. However, if this is actually
a command line app with the characters ".app" in the name, it would
end up trying to launch that via the FrontBoard calls even though it
needed to be launched via posix_spawn. For instance, a command line
program called com.application.tester.
Jim suggested this patch where we only send binaries that end in ".app"
to FrontBoard.
Often debugsever is invoked with a --launch command line argument to
specify the launch method, and none of this code is hit in that
instance.
<rdar://problem/65297100>
If a module has debug info, the size of debug symbol will be displayed after the Symbols Loaded Message for each module in the VScode modules view.{F12335461}
Reviewed By: wallace, clayborg
Differential Revision: https://reviews.llvm.org/D83731
Summary: If a module has debug info, the size of debug symbol will be displayed after the Symbols Loaded Message for each module in the VScode modules view.{F12335461}
Reviewers: wallace, clayborg
Reviewed By: wallace, clayborg
Subscribers: cfe-commits, aprantl, lldb-commits
Tags: #lldb, #clang
Differential Revision: https://reviews.llvm.org/D83731
This patch basically moves the disambiguation code from a place where
it was complicated to implement straight to where the load command is
parsed, which has the neat side affect of actually supporting all call
sites!
rdar://problem/66011909
Differential Revision: https://reviews.llvm.org/D84480
These were found by Clang's new -Wsuggest-override.
This patch doesn't touch any code in unittests/, since much of it intentionally doesn't use override to avoid massive warning spam from -Winconsistent-missing-override due to the use of MOCK_*** macros.
Differential Revision: https://reviews.llvm.org/D83847
It was failing because some module events had empty UUID, and that was not handled correctly.
The diff that added that logic is https://reviews.llvm.org/D82477
Original commit c60216db15.
The test can only run on Darwin because of how it was setup, so I'm
enforcing that.
Summary:
Test Plan:
Reviewers:
Subscribers:
Tasks:
Tags:
Summary: User can expand and check compile unit list for the modules that have debug info.
Reviewers: wallace, clayborg
Reviewed By: clayborg
Subscribers: aprantl, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83072
Summary:
Whenever a module is created, removed or changed, lldb-vscode is now sending an event that can be interpreted by the IDE so that modules can be rendered in the IDE, like the tree view in this screenshot
{F12229758}
Reviewers: wallace, clayborg, kusmour, aadsm
Reviewed By: clayborg
Subscribers: cfe-commits, labath, lldb-commits
Tags: #lldb, #clang
Differential Revision: https://reviews.llvm.org/D82477
There are bugs where you don't want the signal handler to trigger, most
notably when that will cause another crash. Examples of this are lldb
running out of memory or a bug in the reproducer generation code. This
adds an escape hatch trough a (developer oriented) flag to not install
the signal handler.
rdar://problem/65149595
Differential revision: https://reviews.llvm.org/D83496
This is a preparatory rename of the developer facing reproducer flags.
reproducer-skip-version-check -> reproducer-no-version-check
reproducer-auto-generate -> reproducer-generate-on-quit
This patch fixes debugserver incorrectly returning the SDK version
instead of the minimum deployment target version.
rdar://problem/65001691
Differential Revision: https://reviews.llvm.org/D83443
This reverts commit 0da0437b2a to unbreak
the following tests:
lldb-api.tools/lldb-server.TestAppleSimulatorOSType.py
lldb-api.tools/lldb-server.TestGdbRemoteAttach.py
lldb-api.tools/lldb-server.TestGdbRemoteProcessInfo.py
lldb-api.tools/lldb-server.TestGdbRemoteRegisterState.py
lldb-api.tools/lldb-server.TestGdbRemoteThreadsInStopReply.py
lldb-api.tools/lldb-server.TestLldbGdbServer.py
debugserver and lldb
This patch improves the heuristics for correctly identifying simulator binaries on Darwin and adds support for simulators running on Apple Silicon.
rdar://problem/64046344
Differential Revision: https://reviews.llvm.org/D82616
Summary:
This redoes https://reviews.llvm.org/D79726 and fixes two things.
- The logic that determines whether to automatically disconnect during the tear down is not very dumb compared to the original implementation. Each test will determine whether to do that or not.
- The terminate commands and terminate event were being sent after the disconnect response was sent to the IDE. That was not good, as VSCode stops the debug session as soon as it receives a disconnect response. Now, the terminate event and terminateEvents are being executed before the disconnect response is sent. This ensures that any connection between the IDE and lldb-vscode is alive while the terminate commands are executed. Besides, it also allows displaying the output of the terminate commands on the debug console, as it's still alive.
Reviewers: clayborg, aadsm, kusmour, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81978
Summary:
Recently I've noticed that VSCode sometimes doesn't send the terminateDebuggee flag within the disconnectRequest,
even though lldb-vscode sets the terminateDebuggee capability correctly.
This has been causing that inferiors don't die after the debug session ends, and many users have reported issues because of this.
An easy way to mitigate this is to set better default values for the terminateDebuggee field in the disconnect request.
I'm assuming that for a launch request, the default will be true, and for attach it'll be false.
Reviewers: clayborg, labath, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D81200
Set the correct os type in the arch triple when running macOS.
Debugserver currently always assumes macOS == x86_64. This patch
generalizes the support to make sure it works on a different
architecture.
Differential Revision: https://reviews.llvm.org/D82394
This brings over functionality from the xcodeproject that went missing during the CMake transition.
rdar://problem/63840635
Differential Revision: https://reviews.llvm.org/D81300
Color the error: and warning: part of the CommandReturnObject output,
similar to how an error is printed from the driver when colors are
enabled.
Differential revision: https://reviews.llvm.org/D81058
Summary:
Running `vsce package` to package lldb-vscode as an installable .vsix file errors with:
```
ERROR Invalid publisher name 'llvm.org'. Expected the identifier of a publisher, not its human-friendly name.
```
This patch fixes the publisher name and bumps a required dependency so that `vsce package` succeeds.
Reviewers: clayborg
Reviewed By: clayborg
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D80569
Summary:
It turns out that the order in which we provide completions for expressions is
nondeterministic. This leads to confusing user experience and also breaks the
reproducer tests (as two LLDB tests can go out of sync due to the
non-determinism in the completion lists)
The reason for the non-determinism is that the CompletionConsumer informs us
about decls in the order in which it finds declarations in the lookup store of
the DeclContexts it visits (mainly this snippet in SemaLookup.cpp):
``` lang=c++
// Enumerate all of the results in this context.
for (DeclContextLookupResult R :
Load ? Ctx->lookups()
: Ctx->noload_lookups(/*PreserveInternalState=*/false)) {
[...]
```
This storage of the lookup is sorted by pointer values (see the hash of
`DeclarationName`) and can therefore be non-deterministic. The LLDB code
completion consumer that receives these calls originally expected that the order
of declarations is defined by Clang, but it seems the API expects the client to
provide an order to the completions.
This patch fixes the issue as follows:
* We sort the completions we get from Clang alphabetically and also by the
priority value we get from Clang (with priority value sorting having precedence
over the alphabetical sorting)
* We make all the functions/variables that touch a completion before the sorting
const-qualified. The idea is that this should prevent that we never have
observable side-effect from touching these declarations in a non-deterministic
order (e.g., we don't try to complete the type by accident).
This way we behave like the other parts of Clang which also sort the results by
some deterministic value (usually the name or something computed from a name,
e.g., edit distance to a given string).
We most likely also need to fix the Clang code to make the loop I listed above
deterministic to prevent these issues in the future (tracked in rdar://63442513
). This wouldn't replace the functionality provided in this patch though as we
would still need the priority and overall alphabetical sorting.
Note: I had to increase the lldb-vscode completion limit to 100 as the tests
look for strings that aren't in the first 50 results anymore due to variable
names starting with letters like 'v' (which are now always shown much further
down in the list due to the alphabetical sorting).
Fixes rdar://63200995
Reviewers: JDevlieghere, clayborg
Reviewed By: JDevlieghere
Subscribers: mgrang, abidh
Differential Revision: https://reviews.llvm.org/D80292
Print a little snippet before exiting when passed unrecognized
arguments. The goal is twofold:
- Point users to lldb --help.
- Make it clear that we exited the debugger.
There appears to be consensus in D80165 that this is the desired
behavior and I personally agree.
Differential revision: https://reviews.llvm.org/D80226
Summary: Adding this in line with "stopCommands" and "exitCommands" so that we can run commands at the end of the debugging session.
Reviewers: clayborg, wallace, labath
Reviewed By: clayborg, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D79726
Before the transition to libOption it was possible to specify arguments
for the inferior without -- as long as they didn't start with a dash.
For example, the following invocations should all behave the same:
$ lldb inferior inferior-arg
$ lldb inferior -- inferior-arg
$ lldb -- inferior inferior-arg
This patch fixes that behavior, documents it and adds a test to cover
the different combinations.
Differential revision: https://reviews.llvm.org/D80165
If the error message from qLaunchSucess included a gdb RSP
metacharacter, it could crash lldb. Apply the binary
escaping to the string before sending it to lldb; lldb
promiscuously applies the binary escaping protocol on
packets it receives.
Also fix a small bug in cstring_to_asciihex_string where
a high bit character (eg utf-8 chars) would not be
quoted correctly due to signed char fun.
Differential Revision: https://reviews.llvm.org/D79614
rdar://problem/62873581
MachProcess.mm uses a TARGET_OS_ macro without directly including
TargetConditionals.h. This currently works as we get the header
as an indirect dependency, but might not in the future.
I just spent some time investigating an internal regression
caused by a similar issue, so I audited the codebase for such
cases.
Similar to
com.apple.debugserver.plist & com.apple.debugserver.internal.plist
com.apple.debugserver.applist.plist & com.apple.debugserver.applist.internal.plist
add a variant of the posix plist.
<rdar://problem/62995567>
Update CallBoardSystemServiceOpenApplication to unconditionally log
the NSError's localizedDescription to Console on app launch failure
(as it was already doing), and also to log the NSError object's
full description to the console, which may contain additional nested
error messages. I'm experimenting to find cases where we will get
more detailed information from app launch failures and will start
by logging both to the console.
<rdar://problem/62709160>
We have the option to stop running commands in batch mode when an error
occurs. When that happens we should exit the driver with a non-zero exit
code.
Differential revision: https://reviews.llvm.org/D78825
This adds an RunCommandInterpreter overload that returns an instance of
SBCommandInterpreterRunResults. The goal is to avoid having to add more
and more overloads when we need more output arguments.
Differential revision: https://reviews.llvm.org/D79120
Currently, `SBCommandInterpreterRunOptions` is defined in
`SBCommandInterpreter.h`. Given that the options are always passed by
reference, a forward declaration is sufficient.
That's not the case for `SBCommandInterpreterRunResults`, which we need
for a new overload for `RunCommandInterpreter` and that returns this new
class by value. We can't include `SBCommandInterpreter.h` because
`SBCommandInterpreter::GetDebugger()` returns SBDebugger by value and
therefore needs a full definition.
This patch moves the definition of `SBCommandInterpreterRunOptions` into
a new header. In a later patch, `SBCommandInterpreterRunResults` will
be defined in there as well, solving the aforementioned problem.
Differential revision: https://reviews.llvm.org/D79115
It seems like only the unittests are building with
BUILD_WITH_INSTALL_RPATH set to OFF. Of course when I did my last change
I only ran check-lldb-unit. Not sure why this difference exists, why
would you even install the unittest?
For the LLDB framework we do need different build and install RPATHs.
Currently that logic lives downstream. I plan to upstream that in the
near future. For now I'm just trying to make it possible to run the
test.
The install name for the Python 3 framework in Xcode is relative to
the framework's location and not the dylib itself.
@rpath/Python3.framework/Versions/3.x/Python3
This means that we need to compute the path to the Python3.framework
and use that as the RPATH instead of the usual dylib's directory.
Summary:
Currently loading core files on lldb-vscode is broken because there's a check in the attach workflow that asserts that the PID is valid, which of course fails for this case.
Hence, I'm adding a "coreFile" argument for the attach request, which does the work correctly.
I don't know how to test it effectively so that it runs on the buildbots and the debugger can in fact makes sense of it. Anyway, the change has been relatively simple.
Reviewers: labath, clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D78839
to make the code conform to llvm style better:
- avoid use of auto where the type is not obivous
- avoid StringRef::data where it is not needed
No functional change intended.
This patch threads an lldb::DescriptionLevel through the typesystem to
allow dumping the full Clang AST (level=verbose) of any lldb::Type in
addition to the human-readable source description (default
level=full). This type dumping interface is currently not exposed
through the SBAPI.
The application is to let lldb-test dump the clang AST of search
results. I need this to test lazy type completion of clang types in
subsequent patches.
Differential Revision: https://reviews.llvm.org/D78329
The SIP debugserver was calling in attach_failed_due_to_sip
haven't worked for a while; remove them. To check this
properly we'd need debugsever to call out to codesign(1) to
inspect the entitlements, or the equivalant API,
and I'm not interested in adding that at this point. SIP
is has been the default on macOS for a couple of releases
and it's expected behavior now.
<rdar://problem/59198052>
Summary:
When using source maps for a breakpoint, in order to find the actual source that breakpoint has resolved, we
need to use a query similar to what CommandObjectSource::DumpLinesInSymbolContexts does, which is the logic
used by the CLI to display the source line at a given breakpoint. That's necessary because from a breakpoint
location you only have an address, which points to the original source location, not the source mapped one.
in the setBreakpoints request handler, we haven't been doing such query and we were returning the original
source location, which was breaking the UX of VSCode, as many breakpoints were being set but not displayed
in the source file next to each line. Besides, clicking the source path of a breakpoint in the breakpoints
view in the debug tab was not working for this case, as VSCode was trying to open a non-existent file, thus
showing an error to the user.
Ideally, we should do the query mentioned above to find the actual source location to respond to the IDE,
however, that query is expensive and users can have an arbitrary number of breakpoints set. As a simpler fix,
the request sent by VSCode already contains the full source path, which exists because the user set it from
the IDE itself, so we can simply reuse it instead of querying from the SB API.
I wrote a test for this, and found out that I had to move SetSourceMapFromArguments after RunInitCommands in
lldb-vscode.cpp, because an init command used in all tests is `settings clear -all`, which would clear the
source map unless specified after initCommands. And in any case, I think it makes sense to have initCommands
run before anything the debugger would do.
Reviewers: clayborg, kusmour, labath, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76968
Summary:
@labath mentioned to me that test files shouldn't have a license header.
I saw this one some days ago, so I'm doing some cleaning.
Reviewers: labath, clayborg
Subscribers: lldb-commits, labath
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77328
Summary: The IDE has no packets that are sent to lldb-vscode that say which thread and frame are selected. The only way we know is we get a request for variables for a stack frame via a "scopes" request. When we receive this packet we make that thread and frame the selected thread and frame in lldb. This way when people execute lldb commands in the debug console by prefixing the expression with the backtick character, we will have the right thread and frame selected. Previously this was not updated as new stack frames were selected.
Reviewers: labath, aadsm, wallace, JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77347
* This is a reattempted commit due to a previous builtbot failure
- Now using a env var to determine whether to run the test, as
someone might have built liblldbIntelFeatures.so without intelPT
support, which would make this test fail.
Summary:
Depends on D76872.
There was no test for the Intel PT support on LLDB, so I'm creating one, which
will help making progress on solid grounds.
The test is skipped if the Intel PT plugin library is not built.
Reviewers: clayborg, labath, kusmour, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77107
Summary:
Depends on D76872.
There was no test for the Intel PT support on LLDB, so I'm creating one, which
will help making progress on solid grounds.
The test is skipped if the Intel PT plugin library is not built.
Reviewers: clayborg, labath, kusmour, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77107
Summary:
Depends on D76872.
There was no test for the Intel PT support on LLDB, so I'm creating one, which
will help making progress on solid grounds.
The test is skipped if the Intel PT plugin library is not built.
Reviewers: clayborg, labath, kusmour, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77107
Summary:
//reviews.llvm.org/D33035 added in 2017 basic support for intel-pt. I
plan to improve it and use it to support reverse debugging.
I fixed a couple of issues and now this plugin works again:
1. pythonlib needed to be linked against it for the SB framework.
Linking was failing because of this
2. the decoding functionality was broken because it lacked handling for
instruction events. It seems old versions of libipt, the actual decoding
library, didn't require these, but modern version require it (you can
read more here
https://github.com/intel/libipt/blob/master/doc/howto_libipt.md). These
events signal overflows of the internal PT buffer in the CPU,
enable/disable events of tracing, async cpu events, interrupts, etc.
I ended up refactoring a little bit the code to reduce code duplication.
In another diff I'll implement some basic tests.
This is a simple execution of the library:
(lldb) target create "/data/users/wallace/rr-project/a.out"
Current executable set to '/data/users/wallace/rr-project/a.out' (x86_64).
(lldb) plugin load liblldbIntelFeatures.so
(lldb) b main
Breakpoint 1: where = a.out`main + 8 at test.cpp:10, address = 0x00000000004007fa
(lldb) b test.cpp:14
Breakpoint 2: where = a.out`main + 50 at test.cpp:14, address = 0x0000000000400824
(lldb) r
Process 902754 stopped
* thread #1, name = 'a.out', stop reason = breakpoint 1.1
frame #0: 0x00000000004007fa a.out`main at test.cpp:10
7 }
8
9 int main() {
-> 10 int z = 0;
11 for(int i = 0; i < 10000; i++)
12 z += fun(z);
13
Process 902754 launched: '/data/users/wallace/rr-project/a.out' (x86_64)
(lldb) processor-trace start all
(lldb) c
Process 902754 resuming
Process 902754 stopped
* thread #1, name = 'a.out', stop reason = breakpoint 2.1
frame #0: 0x0000000000400824 a.out`main at test.cpp:14
11 for(int i = 0; i < 10000; i++)
12 z += fun(z);
13
-> 14 cout << z<< endl;
15 return 0;
16 }
(lldb) processor-trace show-instr-log
thread #1: tid=902754
0x7ffff72299b9 <+9>: addq $0x8, %rsp
0x7ffff72299bd <+13>: retq
0x4007ed <+16>: addl $0x1, %eax
0x4007f0 <+19>: leave
0x4007f1 <+20>: retq
0x400814 <+34>: addl %eax, -0x4(%rbp)
0x400817 <+37>: addl $0x1, -0x8(%rbp)
0x40081b <+41>: cmpl $0x270f, -0x8(%rbp) ; imm = 0x270F
0x400822 <+48>: jle 0x40080a ; <+24> at test.cpp:12
0x400822 <+48>: jle 0x40080a ; <+24> at test.cpp:12
```
Subscribers: mgorny, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76872
Summary:
The DAP specifies the following for the SetBreakpoints request:
The breakpoints returned are in the same order as the elements of the 'breakpoints' arguments
This was not followed, as lldb-vscode was returning the breakpoints in a different order, because they were first stored into a map, and then traversed. Of course, maps normally don't preserve ordering.
See this log I captured:
-->
{"command":"setBreakpoints",
"arguments":{
"source":{
"name":"main.cpp",
"path":"/Users/wallace/fbsource/xplat/sand/test-projects/buck-cpp/main.cpp"
},
"lines":[6,10,11],
"breakpoints":[{"line":6},{"line":10},{"line":11}],
"sourceModified":false
},
"type":"request",
"seq":3
}
<--
{"body":{
"breakpoints":[
{"id":1, "line":11,"source":{"name":"main.cpp","path":"xplat/sand/test-projects/buck-cpp/main.cpp"},"verified":true},
{"id":2,"line":6,"source":{"name":"main.cpp","path":"xplat/sand/test-projects/buck-cpp/main.cpp"},"verified":true},
{"id":3,"line":10,"source":{"name":"main.cpp","path":"xplat/sand/test-projects/buck-cpp/main.cpp"},"verified":true}]},
"command":"setBreakpoints",
"request_seq":3,
"seq":0,
"success":true,
"type":"response"
}
As you can see, the order was not respected. This was causing the IDE not to be able to disable/enable breakpoints by clicking on them in the breakpoint view in the lower corner of the Debug tab.
This diff fixes the ordering problem. The traversal + querying was done very fast in O(nlogn) time. I'm keeping the same complexity.
I also updated a couple of tests to account for the ordering.
Reviewers: clayborg, aadsm, kusmour, labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76891
Those fields inside of the global variable can be local variables because
they are used in only inside of one function: request_launch for launch_info
and request_attach for attach_info.
To avoid confusion an already existing local variable attach_info of
request_attach has been renamed to better reflect its purpose.
Differential Revision: https://reviews.llvm.org/D76593
Summary:
If no custom launching is used, lldb-vscode launches a program with an empty environment by default. In some scenarios, the user might want to simply use the same environment as the IDE to have a set of working environment variables (e.g. PATH wouldn't be empty). In fact, most DAPs in VSCode have this behavior by default. In other cases the user definitely needs to set their custom environment, which is already supported. To make the first case easier for the user (e.g. not having to copy the PATH to the launch.json every time they want to debug simple programs that rely on PATH), a new option is now offered. inheritEnvironment will launch the program copying its own environment, and it's just a boolean flag.
{F11347695}
Reviewers: clayborg, aadsm, diazhector98, kusmour
Subscribers: labath, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74636
Summary:
https://reviews.llvm.org/D65363 introduced the launchCommands argument. However, it did not add
a corresponding definition in the package.json
Reviewers: clayborg, labath, kusmour, aadsm
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76529
Summary:
On Linux, when executing lldb-vscode on a remote machine, lldb-vscode doesn't die after the debug session ends. It keeps trying to read JSON input to no avail.
This diff indicates lldb-vscode to stop reading after a termination event has been processed.
Reviewers: clayborg, aadsm, kusmour
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D76314
If LLDB attaches to an already running target, then structure SBAttachInfo is
used instead of SBLaunchInfo. lldb-vscode function request_attach sets some
values to g_vsc.launch_info, however this field is then not passed anywhere, so
this action has no effect. This commit removes invocation of
SBLaunchInfo::SetDetachOnError, which has no equivalent in SBAttachInfo.
File package.json doesn't describe detachOnError property for "attach" request
type, therefore it is not needed to update it.
Differential Revision: https://reviews.llvm.org/D76351
Summary:
Compiling ObjC++ with Clang modules is usually not working well and compiling
the small debugserver with modules is not worth the trouble.
Reviewers: JDevlieghere
Reviewed By: JDevlieghere
Subscribers: mgorny, JDevlieghere, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74891
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
(Patch re-applied with bugfix this time).
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Martin Storsjö