[NFC] As part of using inclusive language within the llvm project, this patch
renames master plan to controlling plan in lldb.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D113019
This change accomplishes the following:
- Moves `IRExecutionUnit::FindBestAlternateMangledName` to `Language`.
- Renames `FindBestAlternateMangledName` to
`FindBestAlternateFunctionMangledName`
- Changes the first parameter of said method from a `ConstString`
representing a demangled name to a `Mangled`.
- Remove the use of CPlusPlusLanguage from Expression
The work that IRExecutionUnit::CollectFallbackNames is basically the
work that `CPlusPlusLanguage::GetDemangledFunctionNameWithoutArguments`
does already. It's also (at time or writing) specific to C++, so it can
be folded into `IRExecutionUnit::CollectCandidateCPlusPlusNames`.
Differential Revision: https://reviews.llvm.org/D109928
I have 2 goals with this change:
1. Disambiguate between CPlusPlus::FindAlternateFunctionManglings and
IRExecutionUnit::FindBestAlternateMangledName. These are named very
similar things, they try to do very similar things, but their
approaches are different. This change should make it clear that one
is generating possible alternate manglings (through some
heuristics-based approach) and the other is finding alternate
manglings (through searching the SymbolFile for potential matches).
2. Change GenerateAlternateFunctionManglings from a static method in
CPlusPlusLanguage to a virtual method in Language. This will allow us
to remove a direct use of CPlusPlusLanguage in IRExecutionUnit,
further pushing it to be more general. This change doesn't meet this
goal completely but allows for it to happen later.
Though this doesn't remove IRExecutionUnit's dependency on
CPlusPlusLanguage, it does bring us closer to that goal.
Differential Revision: https://reviews.llvm.org/D109785
IRExecutionUnit::SearchSpec is a struct that encapsulates information
needed to look for a symbol. Specifically, it is comprised of a name
represented with a ConstString and a FunctionNameType mask.
Because the mask is unused (effectively always set to
eFunctionNameTypeFull), we can remove the mask and replace all uses with
eFunctionNameTypeFull. After doing that, SearchSpec is effectively a
wrapper around a ConstString.
As an aside, SearchSpec is similar in purpose to Module::LookupInfo. I
briefly considered replacing uses of SearchSpec with LookupInfo, but
the current code only cares about symbol names (treating them as
eFunctionNameTypeFull). This code does care about language type, so
LookupInfo may be appropriate for IRExecutionUnit in the future.
Differential Revision: https://reviews.llvm.org/D109384
Modify OpenOptions enum to open the future path into synchronizing
vFile:open bits with GDB. Currently, LLDB and GDB use different flag
models effectively making it impossible to match bits. Notably, LLDB
uses two bits to indicate read and write status, and uses union of both
for read/write. GDB uses a value of 0 for read-only, 1 for write-only
and 2 for read/write.
In order to future-proof the code for the GDB variant:
1. Add a distinct eOpenOptionReadWrite constant to be used instead
of (eOpenOptionRead | eOpenOptionWrite) when R/W access is required.
2. Rename eOpenOptionRead and eOpenOptionWrite to eOpenOptionReadOnly
and eOpenOptionWriteOnly respectively, to make it clear that they
do not mean to be combined and require update to all call sites.
3. Use the intersection of all three flags when matching against
the three possible values.
This commit does not change the actual bits used by LLDB.
Differential Revision: https://reviews.llvm.org/D106984
This patch refactors IRExecutionUnit::FindInSymbols. It eliminates a few
potential pitfalls and tries to be more explicit about the state carried
between symbol resolution attempts.
Differential revision: https://reviews.llvm.org/D107206
Rather than passing two booleans around, which is especially error prone
with them being next to each other, use a struct with named fields
instead.
Differential revision: https://reviews.llvm.org/D107295
LLVM includes this header unconditionally on all platforms
(including Windows), so this define should no longer be necessary.
No behavior change.
Differential Revision: https://reviews.llvm.org/D107338
This converts a default constructor's member initializers into C++11
default member initializers. This patch was automatically generated with
clang-tidy and the modernize-use-default-member-init check.
$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-default-member-init' -fix
This is a mass-refactoring patch and this commit will be added to
.git-blame-ignore-revs.
Differential revision: https://reviews.llvm.org/D103483
The C headers are deprecated so as requested in D102845, this is replacing them
all with their (not deprecated) C++ equivalent.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D103084
When the user running LLDB with default settings sees the fixit
notification it means that the auto-applied fixit didn't work. This
patch shows the underlying error message instead of just the fixit to
make it easier to understand what the error in the expression was.
Differential Revision: https://reviews.llvm.org/D101333
Commiting this patch for Augusto Noronha who is getting set
up still.
This patch changes Target::ReadMemory so the default behavior
when a read is in a Section that is read-only is to fetch the
data from the local binary image, instead of reading it from
memory. Update all callers to use their old preferences
(the old prefer_file_cache bool) using the new API; we should
revisit these calls and see if they really intend to read
live memory, or if reading from a read-only Section would be
equivalent and important for performance-sensitive cases.
rdar://30634422
Differential revision: https://reviews.llvm.org/D100338
DWARFExpression implements the DWARF2 expression model that left
ambiguity on whether the result of an expression was a value or an
address. This patch implements the DWARF location description model
introduces in DWARF 4 and sets the result Value's kind accordingly, if
the expression comes from a DWARF v4+ compile unit. The nomenclature
is taken from DWARF 5, chapter 2.6 "Location Descriptions".
Differential Revision: https://reviews.llvm.org/D98996
This is a follow-up to 188b0747c1. This
is a very narrow fix to a more general problem. LLDB should be better
at distinguishing between implict and memory location descriptions.
rdar://74902042
The situation with inline asm/MC error reporting is kind of messy at the
moment. The errors from MC layout are not reliably propagated and users
have to specify an inlineasm handler separately to get inlineasm
diagnose. The latter issue is not a correctness issue but could be improved.
* Kill LLVMContext inlineasm diagnose handler and migrate it to use
DiagnoseInfo/DiagnoseHandler.
* Introduce `DiagnoseInfoSrcMgr` to diagnose SourceMgr backed errors. This
covers use cases like inlineasm, MC, and any clients using SourceMgr.
* Move AsmPrinter::SrcMgrDiagInfo and its instance to MCContext. The next step
is to combine MCContext::SrcMgr and MCContext::InlineSrcMgr because in all
use cases, only one of them is used.
* If LLVMContext is available, let MCContext uses LLVMContext's diagnose
handler; if LLVMContext is not available, MCContext uses its own default
diagnose handler which just prints SMDiagnostic.
* Change a few clients(Clang, llc, lldb) to use the new way of reporting.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D97449
LLDB uses utility functions to run code in the inferior for its own
internal purposes, such as reading classes from the Objective-C runtime
for example. Because these expressions should be transparent to the
user, we ignore breakpoints and unwind the stack on errors, which
makes them hard to debug.
This patch adds a new setting target.debug-utility-expression that, when
enabled, changes these options to facilitate debugging. It enables
breakpoints, disables unwinding and writes out the utility function
source code to disk so it shows up in the source view.
Differential revision: https://reviews.llvm.org/D97249
`GetRealStopInfo` has only one call site, and in that call site a reference to the
concrete thread plan is available (`ThreadPlanCallUserExpression`), from which
`GetRealStopInfo` can be called.
Differential Revision: https://reviews.llvm.org/D96687
Swift async functions receive function arguments inside a
heap-allocated data structure, similar to how ObjC block captures or
C++ coroutine arguments are implement. In DWARF they are described
relative to an entry value that produces a pointer into that heap
object. At typical location looks like
DW_OP_entry_value [ DW_OP_reg14 ] DW_OP_deref DW_OP_plus_uconst 32 DW_OP_deref
This allows the unwinder (which has special ABI knowledge to restore
the contents of r14) to push the base address onto the stack thus
allowing the deref/offset operations to continue. The result of the
entry value is a scalar, because DW_OP_reg14 is a register location —
as it should be since we want to restore the pointer value contained
in r14 at the beginning of the function and not the historical memory
contents it was pointing to. The entry value should restore the
address, which is still valid, not the contents at function entry.
To make this work, we need to allow LLDB to dereference Scalar stack
results like load addresses, which is what this patch
does. Unfortunately it is difficult to test this in isolation, since
the DWARFExpression unit test doesn't have a process.
Differential Revision: https://reviews.llvm.org/D96549
The comment for ValueType claims that all values <1 are errors, but
not all switch statements take this into account. This patch
introduces an explicit Error case and deletes all default: cases, so
we get warned about incomplete switch coverage.
https://reviews.llvm.org/D96537
Right now when running `expr --top-level -- void foo() {}`, LLDB just prints a cryptic
`error: Couldn't find $__lldb_expr() in the module` error. The reason for that is
that if we don't have a running process, we try to set our execution policy to always use the
IR interpreter (ExecutionPolicyNever) which works even without a process. However
that code didn't consider the special ExecutionPolicyTopLevel which we use for
top-level expressions. By changing the execution policy to ExecutionPolicyNever,
LLDB thinks we're actually trying to interpret a normal expression inside our
`$__lldb_expr` function and then fails when looking for it.
This just adds an exception for top-level expressions to that code and a bunch of tests.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D91723
This used to be a LLDB_LOGF call that used the printf %s syntax.
0ab109d43d changed it to LLDB_LOG but didn't
update this format string to use formatv's syntax so this just printed '%s'.
Display null pointer as `nullptr`, `nil` and `NULL` for C++,
Objective-C/Objective-C++ and C respectively. The original motivation
for this patch was to display a null std::string pointer as nullptr
instead of "", but the fix seemed generic enough to be done for all
summary providers.
Differential revision: https://reviews.llvm.org/D77153
Dwarf says (Section 2.5.1.1. of DWARF v5) that these operations should
push "generic" (pointer-sized) values. This was not the case for
DW_OP_const operations (which were pushing values based on the size of
arguments), nor DW_OP_litN (which were always pushing 64-bit values).
The practical effect of this that were were unable to display the values
of variables if the size of the DW_OP_const opcode was smaller than the
value of the variable it was describing. This would happen because we
would store this (small) result into a buffer and then would not be able
to read sufficient data out of it (in Value::GetValueAsData). Gcc emits
debug info like this.
Other (more subtle) effects are also possible.
The same fix should be applied to DW_OP_const[us] (leb128 versions), but
I'm not doing that right now, because that would cause us to display
wrong (truncated) values of variables on 32-bit targets (pr48087).
Differential Revision: https://reviews.llvm.org/D90840
This class and it's surroundings contain a lot of shady code, but as far
as I can tell all of that code is unreachable (there is no code actually
setting the value to eValueTypeVector).
According to history this class was introduced in 2012 in
r167033/0665a0f09. At that time, the code seemed to serve some purpose,
and it had two entry points (in Value::SetContext and
ClangExpressionDeclMap::LookupDecl). The first entry point was deleted
in D17897 and the second one in r179842/44342735.
The stated purpose of the patch introducing this class was to fix
TestRegisters.py, and "expr $xmm0" in particular. Both of these things
function perfectly well these days without this class.
The UtilityFunction ctor was dropping the text argument. Probably for
that reason ClangUtilityFunction was setting the parent's member
directly instead of deferring to the parent ctor. Also change the
signatures to take strings which are std::moved in place.
This patch completes https://reviews.llvm.org/D83560. Now that the
compiler can emit `DW_OP_implicit_value` into DWARF expressions, lldb
needed to learn reading these opcodes for variable inspection and
expression evaluation.
This implicit location descriptor specifies an immediate value with two
operands: the length (ULEB128) followed by a block representing the value
in the target memory representation.
rdar://67406091
Differential revision: https://reviews.llvm.org/D89842
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Perform all error handling in ReadCode()
Add :help text describing “< path”, add extra line before Commands
Differential Revision: https://reviews.llvm.org/D87640
This cleanup patch unifies all methods called GetByteSize() in the
ValueObject hierarchy to return an optional, like the methods in
CompilerType do. This means fewer magic 0 values, which could fix bugs
down the road in languages where types can have a size of zero, such
as Swift and C (but not C++).
Differential Revision: https://reviews.llvm.org/D84285
This re-lands the patch with bogus :m_byte_size(0) initalizations removed.
This cleanup patch unifies all methods called GetByteSize() in the
ValueObject hierarchy to return an optional, like the methods in
CompilerType do. This means fewer magic 0 values, which could fix bugs
down the road in languages where types can have a size of zero, such
as Swift and C (but not C++).
Differential Revision: https://reviews.llvm.org/D84285
This patch has no effect for C and C++. In more dynamic languages,
such as Objective-C and Swift GetByteSize() needs to call into the
language runtime, so it's important to pass one in where possible. My
primary motivation for this is some work I'm doing on the Swift
branch, however, it looks like we are also seeing warnings in
Objective-C that this may resolve. Everything in the SymbolFile
hierarchy still passes in nullptrs, because we don't have an execution
context in SymbolFile, since SymbolFile transcends processes.
Differential Revision: https://reviews.llvm.org/D84267
The `intrinsics_gen` target exists in the CMake exports since r309389
(see LLVMConfig.cmake.in), hence projects can depend on `intrinsics_gen`
even it they are built separately from LLVM.
Reviewed By: MaskRay, JDevlieghere
Differential Revision: https://reviews.llvm.org/D83454
This is an NFC cleanup for Clang, and a bugfix for the Swift
branch. In swift-lldb one target may have multiple scratch
TypeSystems, so it is important to pick the one that belongs to the
current frame, rather than the one for the current target.
<rdar://problem/65001402>
Summary:
When tabbing to complete LLDB commands in REPL, characters would at best be
missing but at worst cause the REPL to crash due to out of range string access.
This patch appends the command character to the completion results to fulfill
the assumption that all matches are prefixed by the request's cursor argument
prefix.
Bug report for the Swift REPL
https://bugs.swift.org/browse/SR-12867
Reviewers: teemperor
Reviewed By: teemperor
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D82835
Summary:
The Scalar class claims to follow the C type conversion rules. This is
true for the Promote function, but it is not true for the implicit
conversions done in the getter methods.
These functions had a subtle bug: when extending the type, they used the
signedness of the *target* type in order to determine whether to do
sign-extension or zero-extension. This is not how things work in C,
which uses the signedness of the *source* type. I.e., C does
(sign-)extension before it does signed->unsigned conversion, and not the
other way around.
This means that: (unsigned long)(int)-1
is equal to (unsigned long)0xffffffffffffffff
and not (unsigned long)0x00000000ffffffff
Unsurprisingly, we have accumulated code which depended on this
inconsistent behavior. It mainly manifested itself as code calling
"ULongLong/SLongLong" as a way to get the value of the Scalar object in
a primitive type that is "large enough". Previously, the ULongLong
conversion did not do sign-extension, but now it does.
This patch makes the Scalar getters consistent with the declared
semantics, and fixes the couple of call sites that were using it
incorrectly.
Reviewers: teemperor, JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D82772
The "type" argument to the function is mostly useless -- the only
interesting aspect of it is signedness. Pass signedness directly and
compute the value of bits and signedness fields -- that's exactly
what the single caller of this function does.
Color the error: and warning: part of the CommandReturnObject output,
similar to how an error is printed from the driver when colors are
enabled.
Differential revision: https://reviews.llvm.org/D81058
Quinn Pham