.rela.dyn is a section that has sh_info normally
set to zero. And Info is an optional field in the description
of the relocation section in YAML.
But currently, yaml2obj would fail to produce the object when
Info is not explicitly listed.
The patch fixes the issue.
Differential revision: https://reviews.llvm.org/D60820
llvm-svn: 358656
llvm-objcopy currently emits an error if a section to be removed is
referenced by another section. This is a reasonable thing to do, but is
different to GNU objcopy. We should allow users who know what they are
doing to have a way to produce the invalid ELF. This change adds a new
switch --allow-broken-links to both llvm-strip and llvm-objcopy to do
precisely that. The corresponding sh_link field is then set to 0 instead
of an error being emitted.
I cannot use llvm-readelf/readobj to test the link fields because they
emit an error if any sections, like the .dynsym, cannot be properly
loaded.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D60324
llvm-svn: 358649
Summary:
Reapply r357931 with fixes to ThinLTO testcases and llvm-lto tool.
ThinLTOCodeGenerator currently does not preserve llvm.used symbols and
it can internalize them. In order to pass the necessary information to the
legacy ThinLTOCodeGenerator, the input to the code generator is
rewritten to be based on lto::InputFile.
Now ThinLTO using the legacy LTO API will requires data layout in
Module.
"internalize" thinlto action in llvm-lto is updated to run both
"promote" and "internalize" with the same configuration as
ThinLTOCodeGenerator. The old "promote" + "internalize" option does not
produce the same output as ThinLTOCodeGenerator.
This fixes: PR41236
rdar://problem/49293439
Reviewers: tejohnson, pcc, kromanova, dexonsmith
Reviewed By: tejohnson
Subscribers: ormris, bd1976llvm, mehdi_amini, inglorion, eraman, hiraditya, jkorous, dexonsmith, arphaman, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60421
llvm-svn: 358601
Summary:
This change takes the full list of bfd targets that lld supports (see `ScriptParser.cpp`), including generic handling for `*-freebsd` targets (which uses the same settings but with a FreeBSD OSABI). In particular this adds mips support for `--output-target` (but not yet via `--binary-architecture`).
lld and llvm-objcopy use their own different custom data structures, so I'd prefer to check this in as-is (add support directly in llvm-objcopy, including all the test coverage) and do a separate NFC patch(s) that consolidate the two by putting this mapping into libobject.
See [[ https://bugs.llvm.org/show_bug.cgi?id=41462 | PR41462 ]].
Reviewers: jhenderson, jakehehrlich, espindola, alexshap, arichardson
Reviewed By: arichardson
Subscribers: fedor.sergeev, emaste, sdardis, krytarowski, atanasyan, llvm-commits, MaskRay, arichardson
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60773
llvm-svn: 358562
The default handling splits input into lines. Since
llvm-microsoft-demangle-fuzzer doesn't do this, oss-fuzz produces inputs
that only trigger crashes if the input isn't split into lines. This adds
a hidden flag -raw-file which passes file contents to microsoftDemangle() in
the same way the fuzzer does, for reproducing oss-fuzz reports.
Also change llvm-undname to have a non-0 exit code for invalid symbols.
Differential Revision: https://reviews.llvm.org/D60771
llvm-svn: 358485
This relands D60376/rL358405, with the difference: sed 'y/\t/ /' -> tr '\t' ' '
BSD sed doesn't support escape characters for the 'y' command.
I didn't use it in rL358405 because it was not listed at
https://llvm.org/docs/GettingStarted.html#software but it
should be available.
Original description:
In GNU objdump, -w/--wide aligns instructions in the disassembly output.
This patch does the same to llvm-objdump. However, we always use the
wide format (-w/--wide is ignored), because the narrow format
(instructions are misaligned) is probably not very useful.
In llvm-readobj, we made a similar decision: always use the wide format,
accept but ignore -W/--wide.
To save some columns, we change the tab before hex bytes (controlled by
--[no-]show-raw-insn) to a space.
llvm-svn: 358474
This relands rL358418. It missed one test that should also use -macho
Note, all the other -private-header -exports-trie tests are used
together with -macho.
llvm-svn: 358472
Summary: Add DefaultOption flag to CommandLineParser which provides a
default option or alias, but allows users to override it for some
other purpose as needed.
Also, add `-h` as a default alias to `-help`, which can be seamlessly
overridden by applications like llvm-objdump and llvm-readobj which
use `-h` as an alias for other options.
(relanding after revert, r358414)
Added DefaultOptions.clear() to reset().
Reviewers: alexfh, klimek
Reviewed By: klimek
Subscribers: kristina, MaskRay, mehdi_amini, inglorion, dexonsmith, hiraditya, llvm-commits, jhenderson, arphaman, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D59746
llvm-svn: 358428
Summary:
In GNU objdump, -w/--wide aligns instructions in the disassembly output.
This patch does the same to llvm-objdump. However, we always use the
wide format (-w/--wide is ignored), because the narrow format
(instructions are misaligned) is probably not very useful.
In llvm-readobj, we made a similar decision: always use the wide format,
accept but ignore -W/--wide.
To save some columns, we change the tab before hex bytes (controlled by
--[no-]show-raw-insn) to a space.
Reviewers: rupprecht, jhenderson, grimar
Reviewed By: jhenderson
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60376
llvm-svn: 358405
This is a resubmission of a previous patch that caused test failures,
with the fixes for the relevant tests included.
Fixes bug 40630: https://bugs.llvm.org/show_bug.cgi?id=40630
This patch changes the error message when the section specified by
--string-dump cannot be found by including the name of the section in
the error message and changing the prefix text to not imply that the
file itself was invalid. As part of this change some uses of
std::error_code have been replaced with the llvm Error class to better
encapsulate the error info (rather than passing File strings around),
and the WithColor class replaces string literal error prefixes.
llvm-svn: 358395
Summary: Add DefaultOption flag to CommandLineParser which provides a
default option or alias, but allows users to override it for some
other purpose as needed.
Also, add `-h` as a default alias to `-help`, which can be seamlessly
overridden by applications like llvm-objdump and llvm-readobj which
use `-h` as an alias for other options.
Reviewers: alexfh, klimek
Reviewed By: klimek
Subscribers: MaskRay, mehdi_amini, inglorion, dexonsmith, hiraditya, llvm-commits, jhenderson, arphaman, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D59746
llvm-svn: 358337
The size field of a location can be different for each entry, so it is useful to have this displayed in the output of llvm-readobj -stackmap. Below is an example of how the output would look:
Record ID: 2882400000, instruction offset: 16
3 locations:
#1: Constant 1, size: 8
#2: Constant 2, size: 8
#3: Constant 3, size: 8
0 live-outs: [ ]
Patch By: jacob.hughes@kcl.ac.uk (with heavy modification by me)
Differential Revision: https://reviews.llvm.org/D59169
llvm-svn: 358324
Summary:
This ensures that object files will continue to validate as
WebAssembly modules in the presence of bulk memory operations. Engines
that don't support bulk memory operations will not recognize the
DataCount section and will report validation errors, but that's ok
because object files aren't supposed to be run directly anyway.
Reviewers: aheejin, dschuff, sbc100
Subscribers: jgravelle-google, hiraditya, sunfish, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60623
llvm-svn: 358315
This patch reduces the number of functions in the interface between RuntimeDyld
and RuntimeDyldChecker by combining "GetXAddress" and "GetXContent" functions
into "GetXInfo" functions that return a struct describing both the address and
content. The GetStubOffset function is also replaced with a pair of utilities,
GetStubInfo and GetGOTInfo, that fit the new scheme. For RuntimeDyld both of
these functions will return the same result, but for the new JITLink linker
(https://reviews.llvm.org/D58704) these will provide the addresses of PLT stubs
and GOT entries respectively.
For JITLink's use, a 'got_addr' utility has been added to the rtdyld-check
language, and the syntax of 'got_addr' and 'stub_addr' has been changed: both
functions now take two arguments, a 'stub container name' and a target symbol
name. For llvm-rtdyld/RuntimeDyld the stub container name is the object file
name and section name, separated by a slash. E.g.:
rtdyld-check: *{8}(stub_addr(foo.o/__text, y)) = y
For the upcoming llvm-jitlink utility, which creates stubs on a per-file basis
rather than a per-section basis, the container name is just the file name. E.g.:
jitlink-check: *{8}(got_addr(foo.o, y)) = y
llvm-svn: 358295
Only display help from the llvm-nm category instead of all llvm options, which make it much more usable.
There's still an issue with -s, which is probably a bug in llvm::cl and worth another commit.
Differential Revision: https://reviews.llvm.org/D60411
llvm-svn: 358185
Summary:
A *lot* of instructions have this special register.
It seems this never really worked, but i finally noticed it only
because it happened to break for `CMOV16rm` instruction.
We serialized that register as "" (empty string), which is naturally
'ignored' during deserialization, so we re-create a `MCInst` with
too few operands.
And when we then happened to try to resolve variant sched class
for this mis-serialized instruction, and the variant predicate
tried to read an operand that was out of bounds since we got less operands,
we crashed.
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=41448 | PR41448 ]].
Reviewers: craig.topper, courbet
Reviewed By: courbet
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60517
llvm-svn: 358153
Summary: This brings us to full feature parity with the old API, so I've deprecated it and updated the tests. I'll do a follow-up patch to do some more cleanup and documentation work in this header.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60407
llvm-svn: 358037
Removes the code from opt and the pass manager builder.
The code was unused - even by the C library code that was supposed to set
it and had been removed previously.
llvm-svn: 358024
The new value is taken from <mach/machine.h> in the MacOSX10.14 SDK from
Xcode 10.1. Update llvm-objdump and llvm-readobj accordingly.
Differential Revision: https://reviews.llvm.org/D58636
llvm-svn: 357945
Summary:
ThinLTOCodeGenerator currently does not preserve llvm.used symbols and
it can internalize them. In order to pass the necessary information to the
legacy ThinLTOCodeGenerator, the input to the code generator is
rewritten to be based on lto::InputFile.
This fixes: PR41236
rdar://problem/49293439
Reviewers: tejohnson, pcc, dexonsmith
Reviewed By: tejohnson
Subscribers: mehdi_amini, inglorion, eraman, hiraditya, jkorous, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60226
llvm-svn: 357931
It makes more sense to print out the number of micro opcodes that are issued
every cycle rather than the number of instructions issued per cycle.
This behavior is also consistent with the dispatch-stats: numbers from the two
views can now be easily compared.
llvm-svn: 357919
Wanted to check if inablility to measure latency of CMOV32rm
is a regression from D60041 / D60138, but unable to do that
because the llvm-exegesis-{8,9} from debian sid fails
with that cryptic, unhelpful error.
I suspect this will be a better error.
llvm-svn: 357900
The main disassembly loop is hard to read due to special handling of ARM
ELF data & ELF data. Split off the logic into two functions
dumpARMELFData and dumpELFData. Hoist some checks outside of the loop.
--start-address --stop-address have redundant checks and minor off-by-1
issues. Fix them.
llvm-svn: 357869
If the file does not end with a newline, it may be dropped. Fix the
splitting algorithm.
Also delete an unnecessary SourceCache lookup.
llvm-svn: 357858
* Use std::binary_search to replace some std::lower_bound
* Use llvm::upper_bound to replace some std::upper_bound
* Use format_hex and support::endian::read{16,32}
llvm-svn: 357853
Summary:
D60041 / D60138 refactoring changed how CMOV/SETcc opcodes
are handled. concode is now an immediate, with it's own operand type.
This at least allows to not crash on the opcode.
However, this still won't generate all the snippets
with all the condcode enumerators. D60066 does that.
Reviewers: courbet, gchatelet
Reviewed By: gchatelet
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60057
llvm-svn: 357841
Summary:
This avoids needing an isel pattern for each condition code. And it removes translation switches for converting between Jcc instructions and condition codes.
Now the printer, encoder and disassembler take care of converting the immediate. We use InstAliases to handle the assembly matching. But we print using the asm string in the instruction definition. The instruction itself is marked IsCodeGenOnly=1 to hide it from the assembly parser.
Reviewers: spatel, lebedev.ri, courbet, gchatelet, RKSimon
Reviewed By: RKSimon
Subscribers: MatzeB, qcolombet, eraman, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60228
llvm-svn: 357802
Summary:
This avoids needing an isel pattern for each condition code. And it removes translation switches for converting between SETcc instructions and condition codes.
Now the printer, encoder and disassembler take care of converting the immediate. We use InstAliases to handle the assembly matching. But we print using the asm string in the instruction definition. The instruction itself is marked IsCodeGenOnly=1 to hide it from the assembly parser.
Reviewers: andreadb, courbet, RKSimon, spatel, lebedev.ri
Reviewed By: andreadb
Subscribers: hiraditya, lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60138
llvm-svn: 357801
Summary:
Reorder the condition code enum to match their encodings. Move it to MC layer so it can be used by the scheduler models.
This avoids needing an isel pattern for each condition code. And it removes
translation switches for converting between CMOV instructions and condition
codes.
Now the printer, encoder and disassembler take care of converting the immediate.
We use InstAliases to handle the assembly matching. But we print using the
asm string in the instruction definition. The instruction itself is marked
IsCodeGenOnly=1 to hide it from the assembly parser.
This does complicate the scheduler models a little since we can't assign the
A and BE instructions to a separate class now.
I plan to make similar changes for SETcc and Jcc.
Reviewers: RKSimon, spatel, lebedev.ri, andreadb, courbet
Reviewed By: RKSimon
Subscribers: gchatelet, hiraditya, kristina, lebedev.ri, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60041
llvm-svn: 357800
Fixes bug 40630: https://bugs.llvm.org/show_bug.cgi?id=40630
This patch changes the error message when the section specified by
--string-dump cannot be found by including the name of the section in
the error message and changing the prefix text to not imply that the
file itself was invalid. As part of this change some uses of
std::error_code have been replaced with the llvm Error class to better
encapsulate the error info (rather than passing File strings around),
and the WithColor class replaces string literal error prefixes.
Differential Revision: https://reviews.llvm.org/D59946
llvm-svn: 357772
Summary: When recursively extracting a function from a bit code file, include functions mentioned in InvokeInst as well as CallInst
Reviewers: loladiro, espindola, volkan
Reviewed By: loladiro
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60231
llvm-svn: 357735
addr2line allows -e to be grouped with other options; it also allows it
to prefix the value. Thus, all the following usages are possible:
* addr2line -f -e <bin> <addr>
* addr2line -fe <bin> <addr>
* addr2line -f e<bin> <addr>
* addr2line -fe<bin> <addr>
This patch adds the same for llvm-symbolizer.
Differential Revision: https://reviews.llvm.org/D60196
llvm-svn: 357676
In general, llvm-symbolizer follows the output style of GNU's addr2line.
However, there are still some differences; in particular, for a requested
address, llvm-symbolizer prints line and column, while addr2line prints
only the line number.
This patch adds a new switch to select the preferred style.
Differential Revision: https://reviews.llvm.org/D60190
llvm-svn: 357675
Summary:
Now CVType and CVSymbol are effectively type-safe wrappers around
ArrayRef<uint8_t>. Make the kind() accessor load it from the
RecordPrefix, which is the same for types and symbols.
Reviewers: zturner, aganea
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60018
llvm-svn: 357658
Currently, YAML has the following syntax for describing the symbols:
Symbols:
Local:
LocalSymbol1:
...
LocalSymbol2:
...
...
Global:
GlobalSymbol1:
...
Weak:
...
GNUUnique:
I.e. symbols are grouped by their bindings. That is not very convenient,
because:
It does not allow to set a custom binding, what can be useful for producing
broken/special outputs for test cases. Adding a new binding would require to
change a syntax (what we observed when added GNUUnique recently).
It does not allow to change the order of the symbols in .symtab/.dynsym,
i.e. currently all Local symbols are placed first, then Global, Weak and GNUUnique
are following, but we are not able to change the order.
It is not consistent. Binding is just one of the properties of the symbol,
we do not group them by other properties.
It makes the code more complex that it can be. This patch shows it can be simplified
with the change performed.
The patch changes the syntax to just:
Symbols:
Symbol1:
...
Symbol2:
...
...
With that, we are able to work with the binding field just like with any other symbol property.
Differential revision: https://reviews.llvm.org/D60122
llvm-svn: 357595
Summary: Currently, `llvm-readobj` do not support GNU style dumper for symbol versioning sections. In this patch, I would like to implement dumper for `.gnu.version` section
Reviewers: jhenderson, rupprecht, grimar
Reviewed By: jhenderson, rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59877
llvm-svn: 357578
GNU nm has --no-demangle, so llvm-nm should too. It disables the
--demangle switch. The patch also allows --demangle to be specified
multiple times (the last of all --no-demangle/--demangle switches
takes precedence).
Reviewed by: grimar, rupprecht, mattd
Differential Revision: https://reviews.llvm.org/D60134
llvm-svn: 357575
Summary:
Some flags accepted by --set-section-flags and --rename-section can change a SHT_NOBITS section to a SHT_PROGBITS section. Note that none of them can change a SHT_PROGBITS to SHT_NOBITS.
The full list (found via experimentation of individually setting each flag) that does this is: contents, load, noload, code, data, rom, and debug.
This was found by testing llvm-objcopy with the gnu binutils test suite, specifically this test case: https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob;f=binutils/testsuite/binutils-all/copy-1.d;h=f2b0d9e90df738c2891b4d5c7b62f62894b556ca;hb=HEAD
Reviewers: jhenderson, grimar, jakehehrlich, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59958
llvm-svn: 357492
When we're cross-compiling, build and use a native llvm-nm instead of
attempting to use the one from the target's build tree.
A nice follow-up would be to add a cache variable to allow specifying a
path to an external native llvm-nm instead of building one ourselves,
similar to LLVM_TABLEGEN and LLVM_CONFIG_PATH.
Differential Revision: https://reviews.llvm.org/D60025
llvm-svn: 357487
Instead of duplicating functionality for building native versions of
tblgen and llvm-config, add a function to set up a native tool build.
This will also be used for llvm-nm in a follow-up.
This should be NFC for tblgen, besides the slightly different COMMENT
for the custom command (it'll display the tablegen target name instead
of always saying TableGen). For the native llvm-config, it's a behavior
change in that we'll use llvm_ExternalProject_BuildCmd instead of
constructing the build command manually, always build in Release, and
reference the correct binary path for multi-config generators. I believe
all of these changes to be bug fixes.
Differential Revision: https://reviews.llvm.org/D60024
llvm-svn: 357486
This patch fixes https://bugs.llvm.org/show_bug.cgi?id=41293 and
https://bugs.llvm.org/show_bug.cgi?id=41045. llvm-objcopy assumed that
it could always read a section header string table. This isn't the case
when the sections were previously all stripped, and the e_shstrndx field
was set to 0. This patch fixes this. It also fixes a double space in an
error message relating to this issue, and prevents llvm-objcopy from
adding extra space for non-existent section headers, meaning that
--strip-sections on the output of a previous --strip-sections run
produces identical output, simplifying the test.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D59989
llvm-svn: 357475
Summary:
This patch adds the code needed to parse a minidump file into the
MinidumpYAML model, and the necessary glue code so that obj2yaml can
recognise the minidump files and process them.
Reviewers: jhenderson, zturner, clayborg
Subscribers: mgorny, lldb-commits, amccarth, markmentovai, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59634
llvm-svn: 357469
Summary:
BTW, STLExtras.h provides llvm::size() which is similar to std::size()
for random access iterators. However, if we prefer qualified
llvm::size(), the member function .size() will be more convenient.
Reviewers: jhenderson, jakehehrlich, rupprecht, grimar, alexshap, espindola
Reviewed By: grimar
Subscribers: emaste, arichardson, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60028
llvm-svn: 357347
Summary: Support reading notes that don't have a standard note name.
Reviewers: MaskRay
Reviewed By: MaskRay
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59969
llvm-svn: 357271
Summary:
It doesn't need anything from Analysis::SchedClassCluster class,
and takes ResolvedSchedClass as param, so this seems rather fitting.
Reviewers: courbet, gchatelet
Reviewed By: courbet
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59994
llvm-svn: 357263
Summary:
`ResolvedSchedClass` will need to be used outside of `Analysis`
(before `InstructionBenchmarkClustering` even), therefore promote
it into a non-private top-level class, and while there also
move all of the functions that are only called by `ResolvedSchedClass`
into that same new file.
Reviewers: courbet, gchatelet
Reviewed By: courbet
Subscribers: mgorny, tschuett, mgrang, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59993
llvm-svn: 357259
This patch adds an experimental stage named MicroOpQueueStage.
MicroOpQueueStage can be used to simulate a hardware micro-op queue (basically,
a decoupling queue between 'decode' and 'dispatch'). Users can specify a queue
size, as well as a optional MaxIPC (which - in the absence of a "Decoders" stage
- can be used to simulate a different throughput from the decoders).
This stage is added to the default pipeline between the EntryStage and the
DispatchStage only if PipelineOption::MicroOpQueue is different than zero. By
default, llvm-mca sets PipelineOption::MicroOpQueue to the value of hidden flag
-micro-op-queue-size.
Throughput from the decoder can be simulated via another hidden flag named
-decoder-throughput. That flag allows us to quickly experiment with different
frontend throughputs. For targets that declare a loop buffer, flag
-decoder-throughput allows users to do multiple runs, each time simulating a
different throughput from the decoders.
This stage can/will be extended in future. For example, we could add a "buffer
full" event to notify bottlenecks caused by backpressure. flag
-decoder-throughput would probably go away if in future we delegate to another
stage (DecoderStage?) the simulation of a (potentially variable) throughput from
the decoders. For now, flag -decoder-throughput is "good enough" to run some
simple experiments.
Differential Revision: https://reviews.llvm.org/D59928
llvm-svn: 357248
The majority of the printRelocation and printDynamicRelocation functions
were identical. This patch factors this all out into a new function.
There are a couple of minor differences to do with printing of symbols
without names, but I think these are harmless, and in some cases a small
improvement.
Reviewed by: grimar, rupprecht, Higuoxing
Differential Revision: https://reviews.llvm.org/D59823
llvm-svn: 357246
Summary:
The diff looks scary but it really isn't:
1. I moved the check for the number of measurements into `SchedClassClusterCentroid::validate()`
2. While there, added a check that we can only have a single inverse throughput measurement. I missed that when adding it initially.
3. In `Analysis::SchedClassCluster::measurementsMatch()` is called with the current LLVM values from schedule class and the values from Centroid.
3.1. The values from centroid we can already get from `SchedClassClusterCentroid::getAsPoint()`.
This isn't 100% a NFC, because previously for inverse throughput we used `min()`. I have asked whether i have done that correctly in
https://reviews.llvm.org/D57647?id=184939#inline-510384 but did not hear back. I think `avg()` should be used too, thus it is a fix.
3.2. Finally, refactor the computation of the LLVM-specified values into `Analysis::SchedClassCluster::getSchedClassPoint()`
I will need that function for [[ https://bugs.llvm.org/show_bug.cgi?id=41275 | PR41275 ]]
Reviewers: courbet, gchatelet
Reviewed By: courbet
Subscribers: tschuett, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59951
llvm-svn: 357245
Essentially echo "" | yaml2obj crashes. This patch attempts to trim whitespace
and determine if the yaml string in the file is empty or not. If the input is
empty then it will not properly print out an error message and return an error
code.
Differential Revision: https://reviews.llvm.org/D59964
A test/tools/yaml2obj/empty.yaml
M tools/yaml2obj/yaml2obj.cpp
llvm-svn: 357219
Summary: When implementing `GNU style` dumper for `.gnu.version` section, we should find symbol version name by `vs_index`.
Reviewers: jhenderson, rupprecht
Reviewed By: rupprecht
Subscribers: arphaman, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59545
llvm-svn: 357164
Summary:
This is an alternative to D59539.
Let's suppose we have measured 4 different opcodes, and got: `0.5`, `1.0`, `1.5`, `2.0`.
Let's suppose we are using `-analysis-clustering-epsilon=0.5`.
By default now we will start processing the `0.5` point, find that `1.0` is it's neighbor, add them to a new cluster.
Then we will notice that `1.5` is a neighbor of `1.0` and add it to that same cluster.
Then we will notice that `2.0` is a neighbor of `1.5` and add it to that same cluster.
So all these points ended up in the same cluster.
This may or may not be a correct implementation of dbscan clustering algorithm.
But this is rather horribly broken for the reasons of comparing the clusters with the LLVM sched data.
Let's suppose all those opcodes are currently in the same sched cluster.
If i specify `-analysis-inconsistency-epsilon=0.5`, then no matter
the LLVM values this cluster will **never** match the LLVM values,
and thus this cluster will **always** be displayed as inconsistent.
The solution is obviously to split off some of these opcodes into different sched cluster.
But how do i do that? Out of 4 opcodes displayed in the inconsistency report,
which ones are the "bad ones"? Which ones are the most different from the checked-in data?
I'd need to go in to the `.yaml` and look it up manually.
The trivial solution is to, when creating clusters, don't use the full dbscan algorithm,
but instead "pick some unclustered point, pick all unclustered points that are it's neighbor,
put them all into a new cluster, repeat". And just so as it happens, we can arrive
at that algorithm by not performing the "add neighbors of a neighbor to the cluster" step.
But that won't work well once we teach analyze mode to operate in on-1D mode
(i.e. on more than a single measurement type at a time), because the clustering would
depend on the order of the measurements.
Instead, let's just create a single cluster per opcode, and put all the points of that opcode into said cluster.
And simultaneously check that every point in that cluster is a neighbor of every other point in the cluster,
and if they are not, the cluster (==opcode) is unstable.
This is //yet another// step to bring me closer to being able to continue cleanup of bdver2 sched model..
Fixes [[ https://bugs.llvm.org/show_bug.cgi?id=40880 | PR40880 ]].
Reviewers: courbet, gchatelet
Reviewed By: courbet
Subscribers: tschuett, jdoerfert, RKSimon, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59820
llvm-svn: 357152
WarnMissedTransforms.cpp produces remarks that use !Failure tags.
These weren't supported in optrecord.py, so if you encountered one in any of
the tools, the tool would crash.
Add them as a type of missed optimization.
Differential Revision: https://reviews.llvm.org/D59895
llvm-svn: 357110
Right now, if you try to use optdiff.py on any opt records, it will fail because
its calls to gather_results weren't updated to support filtering.
Since filters are supposed to be optional, this makes them None by default in
get_remarks and in gather_results. This allows other tools that don't support
filtering to still use the functions as is.
Differential Revision: https://reviews.llvm.org/D59894
llvm-svn: 357106
ToolOutputFile handles '-' so no need to specialize here.
Also, we neither reassign the variable nor pass it around, thus no need
to use std::unique_ptr<ToolOutputFile>.
exit(1) -> return 1; to call the destructor of raw_fd_stream
llvm-svn: 357051
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=40007.
Idea is to swap the order of stripping. So that we strip sections before
symbols what allows us to strip relocation sections without emitting
the error about relative symbols.
Differential revision: https://reviews.llvm.org/D59763
llvm-svn: 357017
Summary:
This prevents "Cannot encode high byte register in REX-prefixed instruction"
from happening on instructions that require REX encoding when AH & co
get selected.
On the down side, these 4 registers can no longer be selected
automatically, but this avoids having to expose all the X86 encoding
complexity.
Reviewers: gchatelet
Subscribers: tschuett, jdoerfert, llvm-commits, bdb
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59821
llvm-svn: 357003
Found by inspection when looking at the debug output of MCA.
This problem was latent, and none of the upstream models were affected by it.
No functional change intended.
llvm-svn: 357000
llvm-objcopy previously knew nothing about data in segments that wasn't
covered by section headers, meaning that it wrote zeroes instead of what
was there. As it is possible for this data to be useful to the loader,
this patch causes llvm-objcopy to start preserving this data. Data in
sections that are explicitly removed continues to be written as zeroes.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41005.
Reviewed by: jakehehrlich, rupprecht
Differential Revision: https://reviews.llvm.org/D59483
llvm-svn: 356919
The idea of the patch is about to move out the code to a new
helper static functions (to reduce the size of 'handleArgs' and to
isolate the parts of it's logic).
Differential revision: https://reviews.llvm.org/D59762
llvm-svn: 356889
Summary:
Currently, llvm-readobj can dump symbol version sections only in LLVM style. In this patch, I would like to separate these dumpers into GNU style and
LLVM style for future implementation.
Reviewers: grimar, jhenderson, mattd, rupprecht
Reviewed By: jhenderson, rupprecht
Subscribers: ormris, dyung, RKSimon, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59186
llvm-svn: 356881
Fix: r356853 + set AddressAlign to 4 in
Inputs/compress-debug-sections.yaml for the new group section introduced.
Original commit message:
Currently, llvm-objcopy incorrectly handles compression and decompression of the
sections from COMDAT groups, because we do not implement the
replaceSectionReferences for this type of the sections.
The patch does that.
Differential revision: https://reviews.llvm.org/D59638
llvm-svn: 356856
This patch fixes the reason of ubsan failure (UB detected)
happened after landing the D59638 (I had to revert it).
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-bootstrap-ubsan/builds/11760/steps/check-llvm%20ubsan/logs/stdio)
Problem is the following. Our implementation of GroupSection assumes that
its address is 4 bytes aligned when writes it:
template <class ELFT>
void ELFSectionWriter<ELFT>::visit(const GroupSection &Sec) {
ELF::Elf32_Word *Buf =
reinterpret_cast<ELF::Elf32_Word *>(Out.getBufferStart() + Sec.Offset);
...
But the test case for D59638 did not set AddressAlign in YAML. So address was
not 4 bytes aligned since Sec.Offset was odd. That triggered the issue.
This patch teaches llvm-objcopy to report an error for such sections (which should
not met in reality), what is better than having UB.
Differential revision: https://reviews.llvm.org/D59695
llvm-svn: 356853
[Symbolizer] Add getModuleSectionIndexForAddress() helper routine
The https://reviews.llvm.org/D58194 patch changed symbolizer interface.
Particularily it requires not only Address but SectionIndex also.
Note object::SectionedAddress parameter:
Expected<DILineInfo> symbolizeCode(const std::string &ModuleName,
object::SectionedAddress ModuleOffset,
StringRef DWPName = "");
There are callers of symbolizer which do not know particular section index.
That patch creates getModuleSectionIndexForAddress() routine which
will detect section index for the specified address. Thus if caller
set ModuleOffset.SectionIndex into object::SectionedAddress::UndefSection
state then symbolizer would detect section index using
getModuleSectionIndexForAddress routine.
Differential Revision: https://reviews.llvm.org/D58848
llvm-svn: 356829
Summary:
Currently, llvm-readobj can dump symbol version sections only in LLVM style. In this patch, I would like to separate these dumpers into GNU style and
LLVM style for future implementation.
Reviewers: grimar, jhenderson, mattd, rupprecht
Reviewed By: rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59186
llvm-svn: 356764
Summary:
This patch adds the ability to read a yaml form of a minidump file and
write it out as binary. Apart from the minidump header and the stream
directory, only three basic stream kinds are supported:
- Text: This kind is used for streams which contain textual data. This
is typically the contents of a /proc file on linux (e.g.
/proc/PID/maps). In this case, we just put the raw stream contents
into the yaml.
- SystemInfo: This stream contains various bits of information about the
host system in binary form. We expose the data in a structured form.
- Raw: This kind is used as a fallback when we don't have any special
knowledge about the stream. In this case, we just print the stream
contents in hex.
For this code to be really useful, more stream kinds will need to be
added (particularly for things like lists of memory regions and loaded
modules). However, these can be added incrementally.
Reviewers: jhenderson, zturner, clayborg, aprantl
Subscribers: mgorny, lemo, llvm-commits, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59482
llvm-svn: 356753
Currently, llvm-objcopy incorrectly handles compression and decompression of the
sections from COMDAT groups, because we do not implement the
replaceSectionReferences for this type of the sections.
The patch does that.
Differential revision: https://reviews.llvm.org/D59638
llvm-svn: 356738
GNU objcopy can support output formats like elf32-i386-freebsd and
elf64-x86-64-freebsd. The only difference from their regular non-freebsd
counterparts that I have observed is that the freebsd versions set the
OS/ABI field to ELFOSABI_FREEBSD. This patch sets the OS/ABI field
according based on the format whenever --output-format is specified.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D59645
llvm-svn: 356737
Summary:
r354375 added support for most objdump groupings, but didn't add support for -j|--sections, because that wasn't possible.
r354870 added --disassembler options, but grouping still wasn't available.
r355185 supported values for grouped options.
This just puts the three of them together. This supports -j in modes like `-s -j .foo`, `-sj .foo`, `-sj=.foo`, or `-sj.foo`, and similar for `-M`.
Reviewers: ormris, jhenderson, ikudrin
Reviewed By: jhenderson, ikudrin
Subscribers: javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59618
llvm-svn: 356697
Summary:
This considers module symbol streams and the global symbol stream to be
roots. Most types that this considers "unreferenced" are referenced by
LF_UDT_MOD_SRC_LINE id records, which VC seems to always include.
Essentially, they are types that the user can only find in the debugger
if they call them by name, they cannot be found by traversing a symbol.
In practice, around 80% of type information in a PDB is referenced by a
symbol. That seems like a reasonable number.
I don't really plan to do anything with this tool. It mostly just exists
for informational purposes, and to confirm that we probably don't need
to implement type reference tracking in LLD. We can continue to merge
all types as we do today without wasting space.
Reviewers: zturner, aganea
Subscribers: mgorny, hiraditya, arphaman, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59620
llvm-svn: 356692
Summary:
Implements a new target features section in assembly and object files
that records what features are used, required, and disallowed in
WebAssembly objects. The linker uses this information to ensure that
all objects participating in a link are feature-compatible and records
the set of used features in the output binary for use by optimizers
and other tools later in the toolchain.
The "atomics" feature is always required or disallowed to prevent
linking code with stripped atomics into multithreaded binaries. Other
features are marked used if they are enabled globally or on any
function in a module.
Future CLs will add linker flags for ignoring feature compatibility
checks and for specifying the set of allowed features, implement using
the presence of the "atomics" feature to control the type of memory
and segments in the linked binary, and add front-end flags for
relaxing the linkage policy for atomics.
Reviewers: aheejin, sbc100, dschuff
Subscribers: jgravelle-google, hiraditya, sunfish, mgrang, jfb, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59173
llvm-svn: 356610
Summary:
This commit introduces a new AMDGPUPALMetadata class that:
* is inside the AMDGPU target;
* keeps an in-memory representation of PAL metadata;
* provides a method to read the frontend-supplied metadata from LLVM IR;
* provides methods for the asm printer to set metadata items;
* provides methods to write the metadata as a binary blob to put in a
.note record or as an asm directive;
* provides a method to read the metadata as a binary blob from a .note
record.
Because llvm-readobj cannot call directly into a target, I had to remove
llvm-readobj's ability to dump PAL metadata, pending a resolution to
https://reviews.llvm.org/D52821
Differential Revision: https://reviews.llvm.org/D57027
Change-Id: I756dc830894fcb6850324cdcfa87c0120eb2cf64
llvm-svn: 356582
If the compression was used and we had a symbol not involved in relocation,
we never updated its section and it was silently removed from the output.
Differential revision: https://reviews.llvm.org/D59542
llvm-svn: 356554
This adds a Remark class that allows us to share code when working with
remarks.
The C API has been updated to reflect this. Instead of the parser
generating C structs, it's now using a C++ object that is used through
opaque pointers in C. This gives us much more flexibility on what
changes we can make to the internal state of the object and interacts
much better with scenarios where the library is used through dlopen.
* C API updates:
* move from C structs to opaque pointers and functions
* the remark type is now an enum instead of a string
* unit tests updates:
* use mostly the C++ API
* keep one test for the C API
* rename to YAMLRemarksParsingTest
* a typo was fixed: AnalysisFPCompute -> AnalysisFPCommute.
* a new error message was added: "expected a remark tag."
* llvm-opt-report has been updated to use the C++ parser instead of the
C API
Differential Revision: https://reviews.llvm.org/D59049
Original llvm-svn: 356491
llvm-svn: 356519
This adds a Remark class that allows us to share code when working with
remarks.
The C API has been updated to reflect this. Instead of the parser
generating C structs, it's now using a C++ object that is used through
opaque pointers in C. This gives us much more flexibility on what
changes we can make to the internal state of the object and interacts
much better with scenarios where the library is used through dlopen.
* C API updates:
* move from C structs to opaque pointers and functions
* the remark type is now an enum instead of a string
* unit tests updates:
* use mostly the C++ API
* keep one test for the C API
* rename to YAMLRemarksParsingTest
* a typo was fixed: AnalysisFPCompute -> AnalysisFPCommute.
* a new error message was added: "expected a remark tag."
* llvm-opt-report has been updated to use the C++ parser instead of the
C API
Differential Revision: https://reviews.llvm.org/D59049
llvm-svn: 356491
Summary:
GNU ar supports the 'N' count modifier for the extract (x) and delete (d) operations. When an archive contains multiple members with the same name, this can be used to extract (or delete) them individually. For example:
```
$ llvm-ar t archive.a
foo
foo
$ llvm-ar x archive.a
-> Writes foo twice, overwriting it the second time :( :(
$ llvm-ar xN 1 archive.a foo && mv foo foo.1
$ llvm-ar xN 2 archive.a foo && mv foo foo.2
-> Write foo twice, renaming it in between invocations to preserve all versions
```
Reviewers: ruiu, MaskRay
Reviewed By: ruiu, MaskRay
Subscribers: jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59503
llvm-svn: 356466
As discovered in D56774 the command line gets to long, so use a response file
to give the script the libs. This change has been tested and is confirmed
working for me.
Commited on behalf of Jakob Bornecrantz.
Differential Revision: https://reviews.llvm.org/D56781
llvm-svn: 356443
This change makes linking into .build-id atomic and safe to use.
Some users under particular workflows are reporting that this races
more than half the time under particular conditions.
llvm-svn: 356404
This fixes the https://bugs.llvm.org/show_bug.cgi?id=40980.
Previously if string optimization occurred as a result of
StringTableBuilder's finalize() method, the size wasn't updated.
This hopefully also makes the interaction between sections during finalization
processes a bit more clear.
Differential revision: https://reviews.llvm.org/D59488
llvm-svn: 356371
Results in much nicer -help output:
```
$ ./bin/llvm-exegesis -help
USAGE: llvm-exegesis [options]
OPTIONS:
Color Options:
-color - Use colors in output (default=autodetect)
General options:
-enable-cse-in-irtranslator - Should enable CSE in irtranslator
-enable-cse-in-legalizer - Should enable CSE in Legalizer
Generic Options:
-help - Display available options (-help-hidden for more)
-help-list - Display list of available options (-help-list-hidden for more)
-version - Display the version of this program
llvm-exegesis analysis options:
-analysis-clustering-epsilon=<number> - dbscan epsilon for benchmark point clustering
-analysis-clusters-output-file=<string> -
-analysis-display-unstable-clusters - if there is more than one benchmark for an opcode, said benchmarks may end up not being clustered into the same cluster if the measured performance characteristics are different. by default all such opcodes are filtered out. this flag will instead show only such unstable opcodes
-analysis-inconsistencies-output-file=<string> -
-analysis-inconsistency-epsilon=<number> - epsilon for detection of when the cluster is different from the LLVM schedule profile values
-analysis-numpoints=<uint> - minimum number of points in an analysis cluster
llvm-exegesis benchmark options:
-ignore-invalid-sched-class - ignore instructions that do not define a sched class
-mode=<value> - the mode to run
=latency - Instruction Latency
=inverse_throughput - Instruction Inverse Throughput
=uops - Uop Decomposition
=analysis - Analysis
-num-repetitions=<uint> - number of time to repeat the asm snippet
-opcode-index=<int> - opcode to measure, by index
-opcode-name=<string> - comma-separated list of opcodes to measure, by name
-snippets-file=<string> - code snippets to measure
llvm-exegesis options:
-benchmarks-file=<string> - File to read (analysis mode) or write (latency/uops/inverse_throughput modes) benchmark results. “-” uses stdin/stdout.
-mcpu=<string> - cpu name to use for pfm counters, leave empty to autodetect
```
llvm-svn: 356364
yaml2obj currently derives the p_filesz, p_memsz, and p_offset values of
program headers from their sections. This makes writing tests for
certain formats more complex, and sometimes impossible. This patch
allows setting these fields explicitly, overriding the default value,
when relevant.
Reviewed by: jakehehrlich, Higuoxing
Differential Revision: https://reviews.llvm.org/D59372
llvm-svn: 356247
For ELF, we accept but ignore --only-keep-debug. Do the same for llvm-strip.
COFF does implement this, so update the test that it is supported.
llvm-svn: 356207
Summary:
CoverageExporterJson::renderFiles accounts for most of the execution time given a large profdata file with multiple binaries.
Proposed solution is to generate JSON for each file in parallel and sort at the end to preserve deterministic output. Also added flags to skip generating parts of the output to trim the output size.
Patch by Sajjad Mirza (@sajjadm).
Reviewers: Dor1s, vsk
Reviewed By: Dor1s, vsk
Subscribers: liaoyuke, mgrang, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59277
llvm-svn: 356178
This patch changes llvm-objcopy's behaviour to not strip sections that
are in segments, if they otherwise would be due to a stripping operation
(--strip-all, --strip-sections, --strip-non-alloc). This preserves the
segment contents. It does not change the behaviour of --strip-all-gnu
(although we could choose to do so), because GNU objcopy's behaviour in
this case seems to be to strip the section, nor does it prevent removing
of sections in segments with --remove-section (if a user REALLY wants to
remove a section, we should probably let them, although I could be
persuaded that warning might be appropriate). Tests have been added to
show this latter behaviour.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41006.
Reviewed by: grimar, rupprecht, jakehehrlich
Differential Revision: https://reviews.llvm.org/D59293
This is a reland of r356129, attempting to fix greendragon failures
due to a suspected compatibility issue with od on the greendragon bots
versus other versions.
llvm-svn: 356136
This patch changes llvm-objcopy's behaviour to not strip sections that
are in segments, if they otherwise would be due to a stripping operation
(--strip-all, --strip-sections, --strip-non-alloc). This preserves the
segment contents. It does not change the behaviour of --strip-all-gnu
(although we could choose to do so), because GNU objcopy's behaviour in
this case seems to be to strip the section, nor does it prevent removing
of sections in segments with --remove-section (if a user REALLY wants to
remove a section, we should probably let them, although I could be
persuaded that warning might be appropriate). Tests have been added to
show this latter behaviour.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41006.
Reviewed by: grimar, rupprecht, jakehehrlich
Differential Revision: https://reviews.llvm.org/D59293
llvm-svn: 356129
George Rimar