Patch adds support for dumping of file headers with llvm-readobj. XCOFF
object files are added to test dumping a well formed file, and dumping
both negative timestamps and negative symbol counts, both of which are
allowed in the XCOFF definition.
Differential Revision: https://reviews.llvm.org/D60878
llvm-svn: 359878
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
This is a resubmission of a previous patch that caused test failures,
with the fixes for the relevant tests included.
Fixes bug 40630: https://bugs.llvm.org/show_bug.cgi?id=40630
This patch changes the error message when the section specified by
--string-dump cannot be found by including the name of the section in
the error message and changing the prefix text to not imply that the
file itself was invalid. As part of this change some uses of
std::error_code have been replaced with the llvm Error class to better
encapsulate the error info (rather than passing File strings around),
and the WithColor class replaces string literal error prefixes.
llvm-svn: 358395
Fixes bug 40630: https://bugs.llvm.org/show_bug.cgi?id=40630
This patch changes the error message when the section specified by
--string-dump cannot be found by including the name of the section in
the error message and changing the prefix text to not imply that the
file itself was invalid. As part of this change some uses of
std::error_code have been replaced with the llvm Error class to better
encapsulate the error info (rather than passing File strings around),
and the WithColor class replaces string literal error prefixes.
Differential Revision: https://reviews.llvm.org/D59946
llvm-svn: 357772
This patch allows all forms of values for options to be used at the end
of a group. With the fix, it is possible to follow the way GNU binutils
tools handle grouping options better. For example, the -j option can be
used with objdump in any of the following ways:
$ objdump -d -j .text a.o
$ objdump -d -j.text a.o
$ objdump -dj .text a.o
$ objdump -dj.text a.o
Differential Revision: https://reviews.llvm.org/D58711
llvm-svn: 355185
llvm-readobj's error messages were broken for bad archive members. This
patch fixes them, and also adds testing for archive and thin archive
handling within llvm-readobj.
Reviewed by: rupprecht, grimar, higuoxing
Differential Revision: https://reviews.llvm.org/D58681
llvm-svn: 354960
When type streams with forward references were merged using GHashes, cycles
were introduced in the debug info. This was caused by
GlobalTypeTableBuilder::insertRecordAs() not inserting the record on the second
pass, thus yielding an empty ArrayRef at that record slot. Later on, upon PDB
emission, TpiStreamBuilder::commit() would skip that empty record, thus
offseting all indices that came after in the stream.
This solution comes in two steps:
1. Fix the hash calculation, by doing a multiple-step resolution, iff there are
forward references in the input stream.
2. Fix merge by resolving with multiple passes, therefore moving records with
forward references at the end of the stream.
This patch also adds support for llvm-readoj --codeview-ghash.
Finally, fix dumpCodeViewMergedTypes() which previously could reference deleted
memory.
Fixes PR40221
Differential Revision: https://reviews.llvm.org/D57790
llvm-svn: 353412
Summary:
The following patch introduces a new function `printSectionMapping` which is responsible for dumping just the section-to-segment mapping.
This patch also introduces a n option `-section-mapping` that outputs that mapping without the program headers.
Previously, this functionality was controlled by `printProgramHeaders`, and the output from `-program-headers` has not been changed. I am happy to change the option name, I copied the name that was displayed when outputting the mapping table.
Reviewers: khemant, jhenderson, grimar, rupprecht
Reviewed By: jhenderson, grimar, rupprecht
Subscribers: rupprecht, jhenderson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57365
llvm-svn: 352896
In r287786, a bug was introduced into llvm-readelf where it didn't print
the static symbol table if both --symbols and --dyn-symbols were
specified, even if there was no dynamic symbol table. This is obviously
incorrect.
This patch fixes this issue, by delegating the decision of which symbol
tables should be printed to the final dumper, rather than trying to
decide in the command-line option handling layer. The decision was made
to follow the approach taken in this patch because the LLVM style dumper
uses a different order to the original GNU style behaviour (and GNU
readelf) for ELF output. Other approaches resulted in behaviour changes
for other dumpers which felt wrong. In particular, I wanted to avoid
changing the order of the output for --symbols --dyn-symbols for LLVM
style, keep what is emitted by --symbols unchanged for all dumpers, and
avoid having different orders of .dynsym and .symtab dumping for GNU
"--symbols" and "--symbols --dyn-symbols".
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D57016
llvm-svn: 351960
In r287786, the behaviour of --dyn-symbols in llvm-readelf (but not
llvm-readobj) was changed to print the dynamic symbols as derived from
the hash table, rather than to print the dynamic symbol table contents
directly. The original change was initially submitted without review,
and some comments were made on the commit mailing list implying that the
new behavious is GNU compatible. I argue that it is not:
1) It does not include a null symbol.
2) It prints the symbols based on an order derived from the hash
table.
3) It prints an extra column indicating which bucket it came from.
This could break parsers that expect a fixed number of columns,
with the first column being the symbol index.
4) If the input happens to have both .hash and .gnu.hash section, it
prints interpretations of them both, resulting in most symbols
being printed twice.
5) There is no way of just printing the raw dynamic symbol table,
because --symbols also prints the static symbol table.
This patch reverts the --dyn-symbols behaviour back to its old behaviour
of just printing the contents of the dynamic symbol table, similar to
what is printed by --symbols. As the hashed interpretation is still
desirable to validate the hash table, it puts it under a new switch
"--hash-symbols". This is a no-op on all output forms except for GNU
output style for ELF. If there is no hash table, it does nothing,
unlike the previous behaviour which printed the raw dynamic symbol
table, since the raw dynsym is available under --dyn-symbols.
The yaml input for the test is based on that in
test/tools/llvm-readobj/demangle.test, but stripped down to the bare
minimum to provide a valid dynamic symbol.
Note: some LLD tests needed updating. I will commit a separate patch for
those.
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D56910
llvm-svn: 351789
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This change adds demangling support to the ELF side of llvm-readobj,
under the switch --demangle/-C.
The following places are demangled: symbol table dumps (static and
dynamic), relocation dumps (static and dynamic), addrsig dumps, call
graph profile dumps, and group section signature symbols.
Although GNU readelf doesn't support demangling, it is still a useful
feature to have, and brings it on a par with llvm-objdump's
capabilities.
This fixes https://bugs.llvm.org/show_bug.cgi?id=40054.
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D56791
llvm-svn: 351450
Summary:
This patch adds support for merged arguments (e.g. -SW == -S -W) for llvm-readelf.
No changes are intended for llvm-readobj. There are a few short flags (-sd, -sr, -st, -dt) that would conflict with grouped single letter flags, and having only some grouped flags might be confusing. So, allow merged flags for readelf compatibility, but force separate args for llvm-readobj. From what I can tell, these two-letter flags are only used with llvm-readobj, not llvm-readelf.
This fixes PR40064.
Reviewers: jhenderson, kristina, echristo, phosek
Reviewed By: jhenderson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56629
llvm-svn: 351205
Summary:
This change adds a bunch of options that GNU readelf supports. There is one breaking change when invoked as `llvm-readobj`, and three breaking changes when invoked as `llvm-readelf`:
- Add --all (implies --file-header, --program-headers, etc.)
- [Breaking] -a is --all instead of --arm-attributes
- Add --file-header as an alias for --file-headers
- Replace --sections with --sections-headers, keeping --sections as an alias for it
- Add --relocs as an alias for --relocations
- Add --dynamic as an alias for --dynamic-table
- Add --segments as an alias for --program-headers
- Add --section-groups as an alias for --elf-section-groups
- Add --dyn-syms as an alias for --dyn-symbols
- Add --syms as an alias for --symbols
- Add --histogram as an alias for --elf-hash-histogram
- [Breaking] When invoked as `llvm-readelf`, -s is --symbols instead of --sections
- [Breaking] When invoked as `llvm-readelf`, -t is no longer an alias for --symbols
Reviewers: MaskRay, phosek, mcgrathr, jhenderson
Reviewed By: MaskRay, jhenderson
Subscribers: sbc100, aheejin, edd, jhenderson, silvas, echristo, compnerd, kristina, javed.absar, kristof.beyls, llvm-commits, Bigcheese
Differential Revision: https://reviews.llvm.org/D54124
llvm-svn: 346685
For people who use llvm-readelf as a replacement of GNU readelf, they would like to see -d -r ... listed in llvm-readelf -help. It also helps understanding the confusing -s (which is unfortunately different in semantics).
Reviewers: phosek, ruiu, echristo
Reviewed By: ruiu, echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52129
llvm-svn: 342339
The format is the same as in ELF: a sequence of ULEB128-encoded
symbol indexes.
Differential Revision: https://reviews.llvm.org/D51047
llvm-svn: 340499
Helpers are available to make this option file format independant. This
patch adds the feature for Wasm file format. It doesn't change the
behavior of the other file format handling.
Differential Revision: https://reviews.llvm.org/D49545
llvm-svn: 337896
This change adds experimental support for SHT_RELR sections, proposed
here: https://groups.google.com/forum/#!topic/generic-abi/bX460iggiKg
Definitions for the new ELF section type and dynamic array tags, as well
as the encoding used in the new section are all under discussion and are
subject to change. Use with caution!
Author: rahulchaudhry
Differential Revision: https://reviews.llvm.org/D47919
llvm-svn: 335922
Object FIle Representation
At codegen time this is emitted into the ELF file a pair of symbol indices and a weight. In assembly it looks like:
.cg_profile a, b, 32
.cg_profile freq, a, 11
.cg_profile freq, b, 20
When writing an ELF file these are put into a SHT_LLVM_CALL_GRAPH_PROFILE (0x6fff4c02) section as (uint32_t, uint32_t, uint64_t) tuples as (from symbol index, to symbol index, weight).
Differential Revision: https://reviews.llvm.org/D44965
llvm-svn: 333823
This is a follow-up to r331272.
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\@brief'); do perl -pi -e 's/\@brief //g' $i & done
https://reviews.llvm.org/D46290
llvm-svn: 331275
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
llvm-svn: 330046
Introduce an extension to support passing linker options to the linker.
These would be ignored by older linkers, but newer linkers which support
this feature would be able to process the linker.
Emit a special discarded section `.linker-option`. The content of this
section is a pair of strings (key, value). The key is a type identifier for
the parameter. This allows for an argument free parameter that will be
processed by the linker with the value being the parameter. As an example,
`lib` identifies a library to be linked against, traditionally the `-l`
argument for Unix-based linkers with the parameter being the library name.
Thanks to James Henderson, Cary Coutant, Rafael Espinolda, Sean Silva
for the valuable discussion on the design of this feature.
llvm-svn: 323783
There were a few places where outs() was being used
directly rather than the ScopedPrinter object.
Differential Revision: https://reviews.llvm.org/D41370
llvm-svn: 322141
This enables readobj to output Windows resource files (.res). This way,
we'll be able to test .res outputs without comparing them byte-by-byte
with "magic binary files" generated by MS toolchain.
Differential Revision: https://reviews.llvm.org/D38058
llvm-svn: 313790
Install an llvm-readelf symlink to llvm-readobj.
When invoked as *readelf*, default to -elf-output-style=GNU.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D33869
llvm-svn: 308408
Accept and ignore --wide/-W. In GNU readelf this switch is
necessary to get the output format that's consistent between
32-bit and 64-bit targets. llvm-readobj always produces that
output format.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D33873
llvm-svn: 308396
In GNU readelf, the short option for --sections is upper-case -S.
Note that GNU uses lower-case -s to mean --symbols, while LLVM
uses -s to mean --sections and -t to mean --symbols (-t has yet a
different meaning in GNU). So command-line uses with -S can now
be compatible, but uses with -s or -t are still incompatible.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D33872
llvm-svn: 308392
This includes the safe SEH tables and the control flow guard function
table. LLD will emit the guard table soon, and I need a tool that dumps
them for testing.
llvm-svn: 305979
The previous code was discarding the error message from
createBinary() by calling errorToErrorCode().
This meant that such error were always reported unhelpfully
as "Invalid data was encountered while parsing the file".
Other tools such as llvm-objdump already produce a more
the error message in this case.
Differential Revision: https://reviews.llvm.org/D32985
llvm-svn: 302664
This patch dumps the raw bytes of the .rsrc sections that
are present in COFF object and executable files. Subsequent
patches will parse this information and dump in a more human
readable format.
Differential Revision: https://reviews.llvm.org/D32463
Patch By: Eric Beckmann
llvm-svn: 301578
Summary: MSVC does this when producing a PDB.
Reviewers: ruiu
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D31316
llvm-svn: 298717
- Rename runtime metadata -> code object metadata
- Make metadata not flow
- Switch enums to use ScalarEnumerationTraits
- Cleanup and move AMDGPUCodeObjectMetadata.h to AMDGPU/MCTargetDesc
- Introduce in-memory representation for attributes
- Code object metadata streamer
- Create metadata for isa and printf during EmitStartOfAsmFile
- Create metadata for kernel during EmitFunctionBodyStart
- Finalize and emit metadata to .note during EmitEndOfAsmFile
- Other minor improvements/bug fixes
Differential Revision: https://reviews.llvm.org/D29948
llvm-svn: 298552
Create a WasmDumper subclass of ObjDumper to support Webassembly binary
files.
Patch by Sam Clegg
Differential Revision: https://reviews.llvm.org/D27355
llvm-svn: 293569
This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
Sean Fertile