check file to not be unreasonably slow in the face of multiple check
prefixes.
The previous logic would repeatedly scan potentially large portions of
the check file looking for alternative prefixes. In the worst case this
would scan most of the file looking for a rare prefix between every
single occurance of a common prefix. Even if we bounded the scan, this
would do bad things if the order of the prefixes was "unlucky" and the
distant prefix was scanned for first.
None of this is necessary. It is straightforward to build a state
machine that recognizes the first, longest of the set of alternative
prefixes. That is in fact exactly whan a regular expression does.
This patch builds a regular expression once for the set of prefixes and
then uses it to search incrementally for the next prefix. This requires
some threading of state but actually makes the code dramatically
simpler. I've also added a big comment describing the algorithm as it
was not at all obvious to me when I started.
With this patch, several previously pathological test cases in
test/CodeGen/X86 are 5x and more faster. Overall, running all tests
under test/CodeGen/X86 uses 10% less CPU after this, and because all the
slowest tests were hitting this, finishes in 40% less wall time on my
system (going from just over 5.38s to just over 3.23s) on a release
build! This patch substantially improves the time of all 7 X86 tests
that were in the top 20 reported by --time-tests, 5 of them are
completely off the list and the remaining 2 are much lower. (Sadly, the
new tests on the list include 2 new X86 ones that are slow for unrelated
reasons, so the count stays at 4 of the top 20.)
It isn't clear how much this helps debug builds in aggregate in part
because of the noise, but it again makes mane of the slowest x86 tests
significantly faster (10% or more improvement).
llvm-svn: 289382
This fixes one formatting goof I left in my previous commit and *many*
other inconsistencies.
I'm planning to make substantial changes here and so wanted to get to
a clean baseline.
llvm-svn: 289379
make some readability improvements.
Both the check file and input file have to be fully buffered to
normalize their whitespace. But previously this would be done in a stack
SmallString and then copied into a heap allocated MemoryBuffer. That
seems pretty wasteful, especially for something like FileCheck where
there are only ever two such entities.
This just rearranges the code so that we can keep the canonicalized
buffers on the stack of the main function, use reasonably large stack
buffers to reduce allocation. A rough estimate seems to show that about
80% of LLVM's .ll and .s files will fit into a 4k buffer, so this should
completely avoid heap allocation for the buffer in those cases. My
system's malloc is fast enough that the allocations don't directly show
up in timings. However, on some very slow test cases, this saves 1% - 2%
by avoiding the copy into the heap allocated buffer.
This also splits out the code which checks the input into a helper much
like the code to build the checks as that made the code much more
readable to me. Nit picks and suggestions welcome here. It has really
exposed a *bunch* of stuff that could be cleaned up though, so I'm
probably going to go and spring clean all of this code as I have more
changes coming to speed things up.
llvm-svn: 289378
clang -target arm deprecated-asm.s -c
deprecated-asm.s:30:9: warning: use of SP or PC in the list is deprecated
stmia r4!, {r12-r14}
We have to have an option what can disable it.
Patched by Yin Ma!
Reviewers: joey, echristo, weimingz
Subscribers: llvm-commits, aemerson
Differential Revision: https://reviews.llvm.org/D27219
llvm-svn: 288734
Summary:
Libc++ frequently has the need to parse more than just the builtin *test keywords* (`RUN`, `REQUIRES`, `XFAIL`, ect). For example libc++ currently needs a new keyword `MODULES-DEFINES: macro list...`. Instead of re-implementing the script parsing in libc++ this patch allows `parseIntegratedTestScript` to take custom parsers.
This patch introduces a new class `IntegratedTestKeywordParser` which implements the logic to parse/process a test keyword. Parsing of various keyword "kinds" are supported out of the box, including 'TAG', 'COMMAND', and 'LIST', which parse keywords such as `END.`, `RUN:` and `XFAIL:` respectively.
As an example after this change libc++ can implement the `MODULES-DEFINES` simply using:
```
mparser = IntegratedTestKeywordParser('MODULES-DEFINES:', ParserKind.LIST)
parseIntegratedTestScript(test, additional_parsers=[mparser])
macro_list = mparser.getValue()
```
Reviewers: ddunbar, modocache, rnk, danalbert, jroelofs
Subscribers: mgrang, llvm-commits, cfe-commits
Differential Revision: https://reviews.llvm.org/D27005
llvm-svn: 288694
Bring the sorting check back that I removed in r288655 but put it under
EXPENSIVE_CHECKS this time. Also document that this the check isn't
purely about having a sorted list but also about operator < having the
correct transitive behavior.
Apply the same to the other check in the file.
llvm-svn: 288693
A debug build of AsmMatcherEmitter would use a quadratic algorithm to
check whether std::stable_sort() actually sorted. Let's hope the authors
of our C++ standard library did that testing for us. Removing the check
gives a 3x speedup in the X86 case.
llvm-svn: 288655
Tablegen's -gen-instr-info pass has a bug in its emitEnums() routine.
The function intends for values in a vector to be deduplicated, but it
accidentally skips over elements after performing a deletion.
I think there are smarter ways of doing this deduplication, but we can
do that in a follow-up commit if there's interest. See the thread:
[PATCH] TableGen InstrMapping Bug fix.
Patch by Tyler Kenney!
llvm-svn: 288408
This shouls now be safe and not break any more bots. It's strictly better to use '--sdk macosx', otherwise xcrun can return weird things for example when you have Command Line Tools or the SDK installed into '/'.
llvm-svn: 288385
When svn does not know the password and it has to prompt, it needs to query.
However it won't when invoked from the Python script and instead fails with:
svn: E215004: Authentication failed and interactive prompting is disabled; see the --force-interactive option
Differential Revision: https://reviews.llvm.org/D27274
llvm-svn: 288266
This reverts commit r287403. It breaks an internal asan bot. According
to Kuba, a fix is up for review here: https://reviews.llvm.org/D26929
llvm-svn: 287804
There were several cases in X86 where we were unable to fully factor a ScopeMatcher but created nested ScopeMatchers for some portions of it. Then we created a SwitchType that split it up and further factored it so that we ended up with something like this:
SwitchType
Scope
Scope
Sequence of matchers
Some other sequence of matchers
EndScope
Another sequence of matchers
EndScope
...Next type
This change turns it into this:
SwitchType
Scope
Sequence of matchers
Some other sequence of matchers
Another sequence of matchers
EndScope
...Next type
Several other in-tree targets had similar nested scopes like this. Overall this doesn't save many bytes, but makes the isel output a little more regular.
llvm-svn: 287624
Summary:
For Sparc the namespace (SP) is different from the target name (Sparc),
which causes the name of the array in this declaration to differ from
the name used in the definition.
Patch by Daniel Cederman.
Reviewers: jyknight
Subscribers: llvm-commits, jyknight
Differential Revision: https://reviews.llvm.org/D23650
llvm-svn: 287528
Previously we were factoring when the ScopeMatcher was initially created, but it might get more Matchers added to it later. Delay factoring until we have fully created/populated the ScopeMatchers.
This reduces X86 isel tables by 154 bytes.
llvm-svn: 287520
Summary:
* ARM is omitted from this patch because this check appears to expose bugs in this target.
* Mips is omitted from this patch because this check either detects bugs or deliberate
emission of instructions that don't satisfy their predicates. One deliberate
use is the SYNC instruction where the version with an operand is correctly
defined as requiring MIPS32 while the version without an operand is defined
as an alias of 'SYNC 0' and requires MIPS2.
* X86 is omitted from this patch because it doesn't use the tablegen-erated
MCCodeEmitter infrastructure.
Patches for ARM and Mips will follow.
Depends on D25617
Reviewers: tstellarAMD, jmolloy
Subscribers: wdng, jmolloy, aemerson, rengolin, arsenm, jyknight, nemanjai, nhaehnle, tstellarAMD, llvm-commits
Differential Revision: https://reviews.llvm.org/D25618
llvm-svn: 287439
The previously used "names" are rather descriptions (they use multiple
words and contain spaces), use short programming language identifier
like strings for the "names" which should be used when exporting to
machine parseable formats.
Also removed a unused TimerGroup from Hexxagon.
Differential Revision: https://reviews.llvm.org/D25583
llvm-svn: 287369
Summary:
This change is preparation for a change that will allow targets to verify that the instructions
they emit meet the predicates they specify. This is useful to ensure that C++
legalization/lowering/instruction-selection doesn't incorrectly select code for a different
subtarget than intended. Such cases are not caught by the integrated assembler when emitting
instructions directly to an object file.
Reviewers: qcolombet
Subscribers: qcolombet, beanz, mgorny, llvm-commits, modocache
Differential Revision: https://reviews.llvm.org/D25614
llvm-svn: 286945
This results in a speed-up of over 6x on sqlite3.
Before:
$ time -p /org/llvm/utils/opt-viewer/opt-viewer.py ./MultiSource/Applications/sqlite3/CMakeFiles/sqlite3.dir/sqlite3.c.opt.yaml html
real 415.07
user 410.00
sys 4.66
After with libYAML:
$ time -p /org/llvm/utils/opt-viewer/opt-viewer.py ./MultiSource/Applications/sqlite3/CMakeFiles/sqlite3.dir/sqlite3.c.opt.yaml html
real 63.96
user 60.03
sys 3.67
I followed these steps to get libYAML working with PyYAML: http://rmcgibbo.github.io/blog/2013/05/23/faster-yaml-parsing-with-libyaml/
llvm-svn: 286942
The existing logic was to discard any symbols representing function template
instantiations, as the definitions were assumed to be inline. But there are
three explicit specializations of clang::Type::getAs that are only defined in
Clang's lib/AST/Type.cpp, and at least the plugin used by the LibreOffice build
(https://wiki.documentfoundation.org/Development/Clang_plugins) uses those
functions.
Differential Revision: https://reviews.llvm.org/D26455
llvm-svn: 286841
When providing the project directory to the merge script, print it out in the
commit instructions instead of the default project directory.
llvm-svn: 286675
When a function is inlined, each instance is optimized in their own
inlining context. This can produce different remarks all pointing to
the same source line.
This adds a new column on the source view to display the inlining
context.
llvm-svn: 286537
Suspected to be the cause of a sanitizer-windows bot failure:
Assertion failed: isImm() && "Wrong MachineOperand accessor", file C:\b\slave\sanitizer-windows\llvm\include\llvm/CodeGen/MachineOperand.h, line 420
llvm-svn: 286385
A relocatable immediate is either an immediate operand or an operand that
can be relocated by the linker to an immediate, such as a regular symbol
in non-PIC code.
Start using relocImm for 32-bit and 64-bit MOV instructions, and for operands
of type "imm32_su". Remove a number of now-redundant patterns.
Differential Revision: https://reviews.llvm.org/D25812
llvm-svn: 286384
With this we get a new field in the YAML record if the value being
streamed out has a debug location. For examples, please see the changes
to the tests.
This is then used in opt-viewer to display a link for the callee
function in the inlining remarks.
Differential Revision: https://reviews.llvm.org/D26366
llvm-svn: 286169
Add a new script in llvm/utils/git-svn/. When present in the $PATH,
it enables a `git llvm` command. It is providing at this
point only the ability to push from the git monorepo: `git llvm push`.
It is intended to evolves with more features, for instance I plan on
features like `git llvm show r284955` to help working with sequential
revision numbers.
The push feature is taken from Justin Lebar's script available here:
https://github.com/jlebar/llvm-repo-tools/
Differential Revision: https://reviews.llvm.org/D26334
llvm-svn: 286138
Summary:
Some changes are made to cmake, especially the addition of a new
LLVM_ENABLE_PROJECTS option that makes the build system aware of
the monorepo directory structure.
Also a new script is added in llvm/utils/git-svn/. When present in
the $PATH, it enables a `git llvm` command. It is providing at this
point only the ability to push from the git monorepo: `git llvm push`.
It is intended to evolves with more features, for instance I plan on
features like `git llvm show r284955` to help working with sequential
revision numbers.
The push feature is taken from Justin Lebar's script available here:
https://github.com/jlebar/llvm-repo-tools/
Reviewers: jlebar
Subscribers: mgorny, modocache, llvm-commits
Differential Revision: https://reviews.llvm.org/D26334
llvm-svn: 286123
A large number of tests in the LLVM tree use the default (CHECK) prefix
to indicate checked expressions via FileCheck. Highlight it as a
special comment. Although this wont get all the instances of the
checked patters, it is strictly better than the current state.
llvm-svn: 285927
2 new intrinsics covering AVX-512 compress/expand functionality.
This implementation includes syntax, DAG builder, operation lowering and tests.
Does not include: handling of illegal data types, codegen prepare pass and the cost model.
llvm-svn: 285876
As it stands, the OperandMatchResultTy is only included in the generated
header if there is custom operand parsing. However, almost all backends
make use of MatchOperand_Success and friends from OperandMatchResultTy for
e.g. parseRegister. This is a pain when starting an AsmParser for a new
backend that doesn't yet have custom operand parsing. Move the enum to
MCTargetAsmParser.h.
This patch is a prerequisite for D23563
Differential Revision: https://reviews.llvm.org/D23496
llvm-svn: 285705
The CodeGenSchedModels::checkCompleteness routine in TableGen/
CodeGenSchedule.cpp is supposed to verify for each processor
model that is marked as "complete" that it actually defines a
scheduling class for each instruction.
However, this did not work correctly due to an incorrect
check whether a scheduling class has an itinerary.
Reviewer: atrick
Differential revision: https://reviews.llvm.org/D26156
llvm-svn: 285622
In --unified-report mode, a single coverage report is prepared for all
specified binaries and written to *report_dir*. This mode is compatible
with all existing script options, including the --restrict mode which is
used to limit coverage reporting to certain files or directories.
This should not break any existing users of the script.
llvm-svn: 285249
In --only-merge mode, the script terminates after the profile merging
step. This makes the script less stateful: it's more natural to split
the merge out into a separate step instead of relying on the first
invocation of the script to do it.
This should not break any existing users of the script.
llvm-svn: 285247
Summary:
This will allow us to revert LLD r284768, which added spaces to get MSys
echo to print what we want.
Reviewers: ruiu, inglorion, rafael
Subscribers: modocache, llvm-commits
Differential Revision: https://reviews.llvm.org/D26009
llvm-svn: 285237
The sanitizer-windows bot turned red with:
FAILED: utils/TableGen/CMakeFiles/obj.llvm-tblgen.dir/IntrinsicEmitter.cpp.obj
C:\PROGRA~2\MICROS~1.0\VC\bin\AMD64_~2\cl.exe ... -c
C:\...\llvm\utils\TableGen\IntrinsicEmitter.cpp
c:\...\llvm\utils\tablegen\intrinsicemitter.cpp(254) :
fatal error C1001: An internal error has occurred in the compiler.
http://lab.llvm.org:8011/builders/sanitizer-windows/builds/114/steps/build%20clang%20lld/logs/stdio
llvm-svn: 285089
Summary:
r283710 introduced two regressions, one to llvm-lit, and the other to
lit executables that were installed via setuptools. Add instructions on
how to test for these regressions in the future.
Reviewers: ddunbar, delcypher, beanz, chapuni, cmatthews, echristo
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25459
llvm-svn: 284919
Summary:
SetVector already used DenseSet, but SmallSetVector used std::set. This
leads to surprising performance differences. Moreover, it means that
the set of key types accepted by SetVector and SmallSetVector are
quite different!
In order to make this change, we had to convert some callsites that used
SmallSetVector<std::string, N> to use SmallSetVector<CachedHashString, N>
instead.
Reviewers: timshen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25648
llvm-svn: 284887
-debug-only=subtarget-emitter prints a lot of machine model diagnostics.
This prunes the output so that the "No machine model for XXX on processor YYY"
only appears when there is definitely no machine model for that opcode.
Previously it was printing that error even if the opcode was covered by
a more general scheduling class.
<rdar://problem/15919845> [TableGen][CodeGenSchedule] Debug output does not help spotting the missing scheduling classes
llvm-svn: 284452
Update the CHECK lines in the shtest-timeout.py lit test to account for
the current output. The output has been changed in r271610 without
adjusting the tests.
Differential Revision: https://reviews.llvm.org/D25236
llvm-svn: 284057
Summary:
The Python file `utils/lit/lit/ShUtil.py` contains:
1. Logic used by lit itself
2. A set of unit tests for that logic, which can be run by invoking
`python utils/lit/lit/ShUtil.py`
Move these unit tests to a `tests/unit` subdirectory of lit, and run
the tests as part of lit's test suite. This ensures that, should the
lit test suite be included in LLVM's own regression test suite, these
unit tests will also be run.
(Instructions on how to run lit's test suite can be found in
`utils/lit/README.txt`.)
Reviewers: ddunbar, echristo, delcypher, beanz
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25411
llvm-svn: 283968
Traceback (most recent call last):
File "bin/llvm-lit", line 44, in <module>
lit.main(builtin_parameters)
AttributeError: 'module' object has no attribute 'main'
Suggested by Artem Belevich.
llvm-svn: 283816
Summary:
Using Python linter flake8 on the utils/lit reveals several linter
warnings designated "F401: Unused import". Fix or silence these
warnings.
Some of these unused imports are legitimate, while some are part of lit's API.
For example, users of lit expect to be able to access `lit.formats.ShTest` in
their `lit.cfg`, despite the module hierarchy for that symbol actually being
`lit.formats.shtest.ShTest`. To silence linter errors for these lines,
include a "noqa" directive.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25407
llvm-svn: 283710
Summary:
`TestingProgressDisplay` initializes its `current` attribute to `None`, but
never reads or writes the value again. Remove it.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25415
llvm-svn: 283709
Summary:
`ArgumentError` is not defined by the Python standard library.
Executing this line of code would throw a exception, but not the
intended one. It would throw a `NameError` exception, since `ArgumentError`
is undefined.
Use `ValueError` instead, which is defined by the Python standard
library.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25410
llvm-svn: 283708
Summary:
Semicolons aren't necessary as statement terminators in Python, and
each of these uses are superfluous as they appear at the end of a line.
The convention is to not use semicolons where not needed, so remove them.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25409
llvm-svn: 283707
Summary: `prefix` is written to but never read.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25408
llvm-svn: 283706
Summary:
The minimum version of Python required to run LLVM's test suite is 2.7.
Remove a workaround for older Python versions.
Reviewers: echristo, delcypher, beanz, ddunbar
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25400
llvm-svn: 283705
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
llvm-svn: 283671
This is a new tool built on top of the new YAML ouput generated from
optimization remarks. It produces HTML for easy navigation and
visualization.
The tool assumes that hotness information for the remarks is available
(the YAML file was produced with PGO). It uses hotness to list the
remarks prioritized by the hotness on the index page. Clicking the
source location of the remark in the list takes you the source where the
remarks are rendedered inline in the source.
For now, the tool is meant as prototype.
It's written in Python. It uses PyYAML to parse the input.
Differential Revision: https://reviews.llvm.org/D25348
llvm-svn: 283571
Summary:
The minimum version of Python necessary to run the LLVM test suite is
2.7. Code to work around Python 2.5 and lower isn't necessary.
Reviewers: ddunbar, echristo, delcypher, beanz
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25209
llvm-svn: 283169
Summary:
optparse is deprecated in Python 2.7, which is the minimum version of
Python required to run the LLVM test suite. Replace its usage in lit
with argparse, optparse's 2.7 replacement module.
argparse has several benefits over optparse, but this commit does not
make use of those benefits yet. Instead, it simply uses the new API,
and attempts to keep the number of changes to a minimum.
Confirmed that lit's test suite, as well as LLVM's regression test suite,
still pass with these changes.
Patch By Brian Gesiak!
Reviewers: ddunbar, echristo, beanz, delcypher
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25173
llvm-svn: 283152
Summary:
lit's `OneCommandFileTest` class implements an abstract method that
raises if called. However, it raises by referencing an undefined
symbol. Instead, raise explicitly by throwing a `NotImplementedError`.
This is clearer, and appeases Python linters.
Patch By Brian Gesiak!
Reviewers: ddunbar, echristo, beanz
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25170
llvm-svn: 283090
Summary:
In Python, `None` is a singleton, so checking whether a variable is
`None` may be done with `is` or `is not`. This has a slight advantage
over equiality comparisons `== None` and `!= None`, since `__eq__` may
be overridden in Python to produce sometimes unexpected results.
Using `is None` and `is not None` is also recommended practice in
https://www.python.org/dev/peps/pep-0008:
> Comparisons to singletons like `None` should always be done with `is` or
> `is not`, never the equality operators.
Patch by Brian Gesiak!
Reviewers: ddunbar, echristo, beanz
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D25168
llvm-svn: 283088
- This is primarily useful as a "fail fast" mode for lit, where it will stop
running tests after the first failure.
- Patch by Max Moiseev.
llvm-svn: 282452
Add two options to the code coverage artifact prep script:
* --use-existing-profdata: Use an existing indexed profile instead of
merging the same profiles again.
* --restrict: Restrict the coverage reporting to the given list of
source directories.
With this in place, we can teach the coverage bot how to prepare
separate reports for each of the llvm tools.
llvm-svn: 282204
In practice, it's way too noisy.
It's also a maintenance burden, since we apparently can't add tests for
it without breaking some Windows setups (see: D22692).
llvm-svn: 281871
descriptions now tag add instructions, and the Hexagon backend is using this to
identify loop induction statements.
Patch by Sam Parker and Sjoerd Meijer.
Differential Revision: https://reviews.llvm.org/D23601
llvm-svn: 281304
Previously, gtest/gtest_main were not exported via cmake. The intention here was
to ensure that users whom are linking against the LLVM install tree would not
get the gtest/gtest_main targets. This prevents downstream projects that link
against the LLVM build tree (i.e. Swift) from getting this dependency
information in their cmake builds. Without such dependency information, linker
issues can result on linux due to LLVMSupport being put before gtest on the
linker command line.
This commit preserves behavior that we want for the install tree, while adding
support for the build tree by:
1. The special casing for gtest/gtest_main in the add_llvm_library code is
removed in favor of a flag called "BUILDTREE_ONLY". If this is set, then the
library is communicating that it is only meant to be exported into the build
tree and is not meant to be installed or exported via the install tree. This
part is just a tweak to remove the special case, the underlying code is the
same.
2. The cmake code that exports cmake targets for the build tree has special code
to import an additional targets file called
LLVMBuildTreeOnlyExports.cmake. Additionally the extra targets are added to the
LLVMConfig.cmake's LLVM_EXPORTED_TARGETS variable. In contrast, the
"installation" cmake file uses the normal LLVM_EXPORTS_TARGETS as before and
does not include the extra exports file. This is implemented by
defining/undefining variables when performing a configure of the build/install
tree LLVMConfig.cmake files.
llvm-svn: 281085
Summary:
This allows specifying instructions that are available only in specific assembler variant. If AsmVariantName is specified then instruction will be presented only in MatchTable for this variant. If not specified then assembler variants will be determined based on AsmString.
Also this allows splitting assembler match tables in same way as it is done in dissasembler.
Reviewers: ab, tstellarAMD, craig.topper, vpykhtin
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D24249
llvm-svn: 280952
Lots of unittests started failing under asan after r280455. It seems
they've been failing for a long time, but lit silently ignored them.
Downgrade the error so we can figure out what is going on.
Filed http://llvm.org/PR30285.
llvm-svn: 280674
Summary:
This is a follow up to r280455, where a check for the process exit code
was introduced. Some ASAN bots throw this error now, but it's impossible
to understand what's wrong with them, and the issue is not reproducible.
Reviewers: vitalybuka
Differential Revision: https://reviews.llvm.org/D24210
llvm-svn: 280550
Do this by creating a temp directory in the normal system temp
directory, and cleaning it up on exit.
It is still possible for this temp directory to leak if Python exits
abnormally, but this is probably good enough for now.
Fixes PR18335
llvm-svn: 280501
googletest formatted tests are discovered by running the test executable.
Previously testing would silently succeed if the test executable crashed
during the discovery process. Now testing fails with "error: unable to
discover google-tests ..." if the test executable exits with a non-zero status.
llvm-svn: 280455
Apparently nobody evaluated multiprocessing on Windows since Daniel
enabled multiprocessing on Unix in r193279. It works so far as I can
tell.
Today this is worth about an 8x speedup (631.29s to 73.25s) on my 24
core Windows machine. Hopefully this will improve Windows buildbot cycle
time, where currently it takes more time to run check-all than it does
to self-host with assertions enabled:
http://lab.llvm.org:8011/builders/clang-x86-windows-msvc2015/builds/20
build stage 2 ninja all ( 28 mins, 22 secs )
ninja check 2 stage 2 ( 37 mins, 38 secs )
llvm-svn: 280382
This mapping is between pointers, which DenseMap is particularly good
at. Most targets aren't really affected, but if there's a lot of
subregister composition this can shave off a good chunk of time from
generating registers.
llvm-svn: 279875
1. Add the "explicit" specifier to the single-argument constructor of Pattern
2. Reorder the fields to remove excessive padding (8 bytes).
Patch by Alexander Shaposhnikov!
llvm-svn: 279832
This tries to keep all the ModRM memory and register forms in their own regions of the encodings. Hoping to make it simple on some of the switch statements that operate on these encodings.
llvm-svn: 279422
Summary:
This is one possible solution to the problem of ignoring constraints that Simon
raised in D21473 but it's a bit of a hack.
The integrated assembler currently ignores violations of the tied register
constraints when the operands involved in a tie are both present in the AsmText.
For example, 'dati $rs, $rt, $imm' with the '$rs = $rt' will silently replace
$rt with $rs. So 'dati $2, $3, 1' is processed as if the user provided
'dati $2, $2, 1' without any diagnostic being emitted.
This is difficult to solve properly because there are multiple parts of the
matcher that are silently forcing these constraints to be met. Tied operands are
rendered to instructions by cloning previously rendered operands but this is
unnecessary because the matcher was already instructed to render the operand it
would have cloned. This is also unnecessary because earlier code has already
replaced the MCParsedOperand with the one it was tied to (so the parsed input
is matched as if it were 'dati <RegIdx 2>, <RegIdx 2>, <Imm 1>'). As a result,
it looks like fixing this properly amounts to a rewrite of the tied operand
handling which affects all targets.
This patch however, merely inserts a checking hook just before the
substitution of MCParsedOperands and the Mips target overrides it. It's not
possible to accurately check the registers are the same this early (because
numeric registers haven't been bound to a register class yet) so it cheats a
bit and checks that the tokens that produced the operand are lexically
identical. This works because tied registers need to have the same register
class but it does have a flaw. It will reject 'dati $4, $a0, 1' for violating
the constraint even though $a0 ends up as the same register as $4.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D21994
llvm-svn: 276867
r276409 changed the coverage summary format. Update the script so that
it can parse the new output, and incorporate the new information into
its warnings.
llvm-svn: 276446
They were all auto-incremented from 0 anyway, and I'm getting really annoying
conflicts and runtime failures when different people add more for GlobalISel
(and even when I'm refactoring my own patches).
NFC.
llvm-svn: 276204
This is for a situation where the encoding for a register may be
different depending on the specific operand. For some instructions,
we want to apply additional restrictions beyond the encoding's
constraints.
In AMDGPU some operands are VSrc_32, using the VS_32 pseudo register
class which accept VGPRs, SGPRs, or immediates in the encoding.
Some specific instructions with the same encoding operand do not want
to allow immediates or SGPRs, but the encoding format is different
in this case than a regular VGPR_32 operand.
This allows specifying the encoding should be treated the same
without introducing yet another dummy register class.
llvm-svn: 275929
Eugene Zelenko