As noticed in D90554 ,
the AVX2 costs for 256-bit vectors did not include FMAXNUM entries,
so we fell back to AVX1 which assumes those ops will be split into
128-bit halves or something close to that.
Differential Revision: https://reviews.llvm.org/D90613
This reverts the revert commit 408c4408fa.
This version of the patch includes a fix for a crash caused by
treating ICmp/FCmp constant expressions as instructions.
Original message:
On some targets, like AArch64, vector selects can be efficiently lowered
if the vector condition is a compare with a supported predicate.
This patch adds a new argument to getCmpSelInstrCost, to indicate the
predicate of the feeding select condition. Note that it is not
sufficient to use the context instruction when querying the cost of a
vector select starting from a scalar one, because the condition of the
vector select could be composed of compares with different predicates.
This change greatly improves modeling the costs of certain
compare/select patterns on AArch64.
I am also planning on putting up patches to make use of the new argument in
SLPVectorizer & LV.
I'm assuming the standard size integer instructions for this end up as something like:
mulq %rsi
seto %al
And the 'mul' generally has reciprocal throughput of 1 on typical implementations
(higher latency, but that's not handled here).
The default costs may end up much higher than that, and that's what we see in the test diffs.
Vector types are left as a 'TODO'.
Differential Revision: https://reviews.llvm.org/D90431
On some targets, like AArch64, vector selects can be efficiently lowered
if the vector condition is a compare with a supported predicate.
This patch adds a new argument to getCmpSelInstrCost, to indicate the
predicate of the feeding select condition. Note that it is not
sufficient to use the context instruction when querying the cost of a
vector select starting from a scalar one, because the condition of the
vector select could be composed of compares with different predicates.
This change greatly improves modeling the costs of certain
compare/select patterns on AArch64.
I am also planning on putting up patches to make use of the new argument in
SLPVectorizer & LV.
Reviewed By: dmgreen, RKSimon
Differential Revision: https://reviews.llvm.org/D90070
In each 128-lane, if there is at least one index is demanded and not all
indices are demanded and this 128-lane is not the first 128-lane of the
legalized-vector, then this 128-lane needs a extracti128;
If in each 128-lane, there is at least one index is demanded, this 128-lane
needs a inserti128.
The following cases will help you build a better understanding:
Assume we insert several elements into a v8i32 vector in avx2,
Case#1: inserting into 1th index needs vpinsrd + inserti128
Case#2: inserting into 5th index needs extracti128 + vpinsrd +
inserti128
Case#3: inserting into 4,5,6,7 index needs 4*vpinsrd + inserti128.
Reviewed By: pengfei, RKSimon
Differential Revision: https://reviews.llvm.org/D89767
This is my first LLVM patch, so please tell me if there are any process issues.
The main observation for this patch is that we can lower UMIN/UMAX with v8i16 by using unsigned saturated subtractions in a clever way. Previously this operation was lowered by turning the signbit of both inputs and the output which turns the unsigned minimum/maximum into a signed one.
We could use this trick in reverse for lowering SMIN/SMAX with v16i8 instead. In terms of latency/throughput this is the needs one large move instruction. It's just that the sign bit turning has an increased chance of being optimized further. This is particularly apparent in the "reduce" test cases. However due to the slight regression in the single use case, this patch no longer proposes this.
Unfortunately this argument also applies in reverse to the new lowering of UMIN/UMAX with v8i16 which regresses the "horizontal-reduce-umax", "horizontal-reduce-umin", "vector-reduce-umin" and "vector-reduce-umax" test cases a bit with this patch. Maybe some extra casework would be possible to avoid this. However independent of that I believe that the benefits in the common case of just 1 to 3 chained min/max instructions outweighs the downsides in that specific case.
Patch By: @TomHender (Tom Hender) ActuallyaDeviloper
Differential Revision: https://reviews.llvm.org/D87236
Changes TTI function getIntImmCostInst to take an additional Instruction parameter,
which enables us to be able to check it is part of a min(max())/max(min()) pattern that will match SSAT.
We can then mark the constant used as free to prevent it being hoisted so SSAT can still be generated.
Required minor changes in some non-ARM backends to allow for the optional parameter to be included.
Differential Revision: https://reviews.llvm.org/D87457
Other types can be handled in future patches but their uniform / non-uniform costs are more similar and don't appear to cause many vectorization issues.
Currently, getCastInstrCost has limited information about the cast it's
rating, often just the opcode and types. Sometimes there is a context
instruction as well, but it isn't trustworthy: for instance, when the
vectorizer is rating a plan, it calls getCastInstrCost with the old
instructions when, in fact, it's trying to evaluate the cost of the
instruction post-vectorization. Thus, the current system can get the
cost of certain casts incorrect as the correct cost can vary greatly
based on the context in which it's used.
For example, if the vectorizer queries getCastInstrCost to evaluate the
cost of a sext(load) with tail predication enabled, getCastInstrCost
will think it's free most of the time, but it's not always free. On ARM
MVE, a VLD2 group cannot be extended like a normal VLDR can. Similar
situations can come up with how masked loads can be extended when being
split.
To fix that, this path adds a new parameter to getCastInstrCost to give
it a hint about the context of the cast. It adds a CastContextHint enum
which contains the type of the load/store being created by the
vectorizer - one for each of the types it can produce.
Original patch by Pierre van Houtryve
Differential Revision: https://reviews.llvm.org/D79162
These cost methods don't make much sense in X86Subtarget. Make
them methods in X86's TTI and move the feature checks from the
X86Subtarget constructor into these methods.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D84594
The main interface has been migrated to Align already but a few backends where broadening the type from Align to MaybeAlign.
This patch makes sure all implementations conform to the public API.
Differential Revision: https://reviews.llvm.org/D82465
Summary:
Get back `const` partially lost in one of recent changes.
Additionally specify explicit qualifiers in few places.
Reviewers: samparker
Reviewed By: samparker
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82383
Have BasicTTI call the base implementation so that both agree on the
default behaviour, which the default being a cost of '1'. This has
required an X86 specific implementation as it seems to be very
reliant on those instructions being free. Changes are also made to
AMDGPU so that their implementations distinguish between cost kinds,
so that the unrolling isn't affected. PowerPC also has its own
implementation to prevent changes to the reg-usage vectorizer test.
The cost model test changes now reflect that ret instructions are not
generally free.
Differential Revision: https://reviews.llvm.org/D79164
Add the remaining arithmetic opcodes into the generic implementation
of getUserCost and then call this from getInstructionThroughput. Most
of the backends have been modified to return the base implementation
for cost kinds other RecipThroughput. The outlier here is AMDGPU
which already uses getArithmeticInstrCost for all the cost kinds.
This change means that most of the opcodes can be removed from that
backends implementation of getUserCost.
Differential Revision: https://reviews.llvm.org/D80992
Add cases for icmp, fcmp and select into the switch statement of the
generic getUserCost implementation with getInstructionThroughput then
calling into it. The BasicTTI and backend implementations have be set
to return a default value (1) when a cost other than throughput is
being queried.
Differential Revision: https://reviews.llvm.org/D80550
Use getMemoryOpCost from the generic implementation of getUserCost
and have getInstructionThroughput return the result of that for loads
and stores.
This also means that the X86 implementation of getUserCost can be
removed with the functionality folded into its getMemoryOpCost.
Differential Revision: https://reviews.llvm.org/D80984
Add the remaining cast instruction opcodes to the base implementation
of getUserCost and directly return the result. This allows
getInstructionThroughput to return getUserCost for the casts. This
has required changes to PPC and SystemZ because they implement
getUserCost and/or getCastInstrCost with adjustments for vector
operations. Adjusts have also been made in the remaining backends
that implement the method so that they still produce a cost of zero
or one for cost kinds other than throughput.
Differential Revision: https://reviews.llvm.org/D79848
Recommitting most of the remaining changes from
259eb619ff, but excluding the call to
getUserCost from getInstructionThroughput. Though there's still no
test changes, I doubt that this is an NFC...
With the two getIntrinsicInstrCosts folded into one, now fold in the
scalar/code-size orientated getIntrinsicCost. The remaining scalar
intrinsics were memcpy, cttz and ctlz which now have special handling
in the BasicTTI implementation.
This had required a change in the AMDGPU backend for fabs as it
should always be 'free'. I've also changed the X86 backend to return
the BaseT implementation when the CostKind isn't RecipThroughput.
Differential Revision: https://reviews.llvm.org/D80012
With the two getIntrinsicInstrCosts folded into one, now fold in the
scalar/code-size orientated getIntrinsicCost. This involved sinking
cost of the TTIImpl into the base implementation, as it performs no
target checks. The opcodes remaining were memcpy, cttz and ctlz which
now have special handling in the BasicTTI implementation.
getInstructionThroughput can now directly return the result of
getUserCost.
This had required a change in the AMDGPU backend for fabs and its
always 'free'. I've also changed the X86 backend to return '1' for
any intrinsic when the CostKind isn't RecipThroughput.
Though this intended to be a non-functional change, there are many
paths being combined here so I would be very surprised if this didn't
have an effect.
Differential Revision: https://reviews.llvm.org/D80012
Combine the two API calls into one by introducing a structure to hold
the relevant data. This has the added benefit of moving the boiler
plate code for arguments and flags, into the constructors. This is
intended to be a non-functional change, but the complicated web of
logic involved here makes it very hard to guarantee.
Differential Revision: https://reviews.llvm.org/D79941
getScalarizationOverhead is only ever called with vectors (and we already had a load of cast<VectorType> calls immediately inside the functions).
Followup to D78357
Reviewed By: @samparker
Differential Revision: https://reviews.llvm.org/D79341
Make the kind of cost explicit throughout the cost model which,
apart from making the cost clear, will allow the generic parts to
calculate better costs. It will also allow some backends to
approximate and correlate the different costs if they wish. Another
benefit is that it will also help simplify the cost model around
immediate and intrinsic costs, where we currently have multiple APIs.
RFC thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-April/141263.html
Differential Revision: https://reviews.llvm.org/D79002
Also fix some cost tables for vXi1 types to match the costs entries for the types they will be promoted to.
Differential Revision: https://reviews.llvm.org/D79045
vpermw is 2 uops. vpermt2b/vpermt2w are two shuffle uops and a port 015 uop. Weirdly vpermb is a single uop.
This patch bumps the cost to 2 for these operations. Maybe should go to 3 for the vpermt2*, but I've started conservative.
I've also removed a few entries that were now the same as earlier subtargets or that I didn't think we really did. Like I don't think we extend v32i8 to v32i16, shuffle, and then truncate.
Differential Revision: https://reviews.llvm.org/D79148
We generate much better code these days than we used to. And we use the same sequence for AVX1 and AVX2 for these
For v4i64->v4i32 we generate:
vextractf128 xmm1, ymm0, 1
vshufps xmm0, xmm0, xmm1, 136 # xmm0 = xmm0[0,2],xmm1[0,2]
And for v8i64->v8i32 we generate:
vperm2f128 ymm2, ymm0, ymm1, 49 # ymm2 = ymm0[2,3],ymm1[2,3]
vinsertf128 ymm0, ymm0, xmm1, 1
vshufps ymm0, ymm0, ymm2, 136 # ymm0 = ymm0[0,2],ymm2[0,2],ymm0[4,6],ymm2[4,6]
Differential Revision: https://reviews.llvm.org/D79109
The improvements to the x86 vector insert/extract element costs in D74976 resulted in the estimated costs for vector initialization and scalarization increasing higher than should be expected. This is particularly noticeable on pre-SSE4 targets where the available of legal INSERT_VECTOR_ELT ops is more limited.
This patch does 2 things:
1 - it implements X86TTIImpl::getScalarizationOverhead to more accurately represent the typical costs of a ISD::BUILD_VECTOR pattern.
2 - it adds a DemandedElts mask to getScalarizationOverhead to permit the SLP's BoUpSLP::getGatherCost to be rewritten to use it directly instead of accumulating raw vector insertion costs.
This fixes PR45418 where a v4i8 (zext'd to v4i32) was no longer vectorizing.
A future patch should extend X86TTIImpl::getScalarizationOverhead to tweak the EXTRACT_VECTOR_ELT scalarization costs as well.
Reviewed By: @craig.topper
Differential Revision: https://reviews.llvm.org/D78216
I've modified isTruncateFree to get an accurate cost for types that need to be split. I'm planning to look into fixing it for all vectors, but need more cost cleanups first.
Differential Revision: https://reviews.llvm.org/D78973
There are several different types of cost that TTI tries to provide
explicit information for: throughput, latency, code size along with
a vague 'intersection of code-size cost and execution cost'.
The vectorizer is a keen user of RecipThroughput and there's at least
'getInstructionThroughput' and 'getArithmeticInstrCost' designed to
help with this cost. The latency cost has a single use and a single
implementation. The intersection cost appears to cover most of the
rest of the API.
getUserCost is explicitly called from within TTI when the user has
been explicit in wanting the code size (also only one use) as well
as a few passes which are concerned with a mixture of size and/or
a relative cost. In many cases these costs are closely related, such
as when multiple instructions are required, but one evident diverging
cost in this function is for div/rem.
This patch adds an argument so that the cost required is explicit,
so that we can make the important distinction when necessary.
Differential Revision: https://reviews.llvm.org/D78635
All avx512 truncate instructions except vXi64->vXi32 are 2 uops
on port 5. So raise their costs to 2. Except when we have an
earlier faster sequence like pshufb for 128 bit input vectors.
Add a lower cost of 3 v16i16->v16i8 with avx512f where we can
extend to v16i32 then truncate. And a cost of 2 for avx512bw with
and without avx512vl. There we can use vpmovwb with either a ymm
or zmm input. Both of these beat masking, splitting, and using
packuswb which is our avx/avx2 codegen.
We're currently getting this from the default implementation. But
I don't like how the cost model came to this answer and I might
be making some changes there.
Sanjay Patel