When introduced, breakpoint names were just tags that you could
apply to breakpoints that would allow you to refer to a breakpoint
when you couldn't capture the ID, or to refer to a collection of
breakpoints.
This change makes the names independent holders of breakpoint options
that you can then apply to breakpoints when you add the name to the
breakpoint. It adds the "breakpoint name configure" command to set
up or reconfigure breakpoint names. There is also full support for
then in the SB API, including a new SBBreakpointName class.
The connection between the name and the breakpoints
sharing the name remains live, so if you reconfigure the name, all the
breakpoint options all change as well. This allows a quick way
to share complex breakpoint behavior among a bunch of breakpoints, and
a convenient way to iterate on the set.
You can also create a name from a breakpoint, allowing a quick way
to copy options from one breakpoint to another.
I also added the ability to make hidden and delete/disable protected
names. When applied to a breakpoint, you will only be able to list,
delete or disable that breakpoint if you refer to it explicitly by ID.
This feature will allow GUI's that need to use breakpoints for their
own purposes to keep their breakpoints from getting accidentally
disabled or deleted.
<rdar://problem/22094452>
llvm-svn: 313292
Summary:
The available platform list was previously only accessible via the
`platform list` command, this patch makes it possible to access that
list via the SBDebugger API. The active platform list has likewise
been exposed via the SBDebugger API.
Differential Revision: https://reviews.llvm.org/D35760
llvm-svn: 310452
You can get a breakpoint to auto-continue by adding "continue"
as a command, but that has the disadvantage that if you hit two
breakpoints simultaneously, the continue will force the process
to continue, and maybe even forstalling the commands on the other.
The auto-continue flag means the breakpoints can negotiate about
whether to stop.
Writing tests, I wanted to supply some commands when I made the
breakpoints, so I also added that ability.
llvm-svn: 309969
When an option was set at on a location, I was just copying the whole option set
to the location, and letting it shadow the breakpoint options. That was wrong since
it meant changes to unrelated options on the breakpoint would no longer take on this
location. I added a mask of set options and use that for option propagation.
I also added a "location" property to breakpoints, and added SBBreakpointLocation.{G,S}etCommandLineCommands
since I wanted to use them to write some more test cases.
<rdar://problem/24397798>
llvm-svn: 309772
Summary:
Implement SBProcessInfo to wrap lldb_private::ProcessInstanceInfo,
and add SBProcess::GetProcessInfo() to retrieve info like parent ID,
group ID, user ID etc. from a live process.
Differential Revision: https://reviews.llvm.org/D35881
llvm-svn: 309664
- Don't do any checks of the current SCM repository if the
llvm repositories are already there. Useful for bots.
- When symlinking, remove old symlinks.
- Support loading build-script as a library, not necessarily
under Xcode.
- Stringify args before passing them to subprocess.
llvm-svn: 309631
This adds an explicit step for processing the headers and restructures how the framework bundles are constructed. This should make the frameworks more reliably constructed.
llvm-svn: 309024
Summary:
SBBreakpointLocation exposed the ignore count, but didn't expose
the hit count. Both values were exposed by SBBreakpoint and
SBWatchpoint, so this makes things a bit more consistent.
Reviewers: lldb-commits
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31283
llvm-svn: 308480
This makes automatic checkout work even in situations where the
current repository can't be determined, such as in the case of a
Git tag.
llvm-svn: 306460
PyObject_CallFunction returns a PyObject which needs to be
decref'ed when it is no longer needed.
Patch by David Luyer
Differential Revision: https://reviews.llvm.org/D33740
llvm-svn: 305873
The simple module import logic was not sufficient for our distribution
model of lldb, which is without the _lldb.pyd file (normally that would
be a symlink to the shared library, but symlinks are not really a thing
on windows).
With the older swigs it worked (loading of the python scripting
machinery from within lldb) because the normal swig import logic
contained a last-ditch import of a global module _lldb (which is defined
when you run python from lldb). Add back the last-ditch import to our
custom import logic as well.
llvm-svn: 305461
Summary:
- Added API to access data types
-- integer, double, array, string, boolean and dictionary data types
-- Earlier user had to parse through the string output to get these
values
- Added Test cases for API testing
- Added new StructuredDataType enum in public include file
-- Replaced locally-defined enum in StructuredData.h with this new
one
-- Modified other internal files using this locally-defined enum
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: clayborg, lldb-commits
Reviewed By: clayborg
Subscribers: labath
Differential Revision: https://reviews.llvm.org/D33434
llvm-svn: 304138
Summary:
A change in swig 3.0.9 has caused it to generate modules incompatible
with us using them as __init__.py (bug #769). Swig 3.0.11 adds a setting to help
fix this problem, so use that. Support for older versions of swig remains
unaffected.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D33409
llvm-svn: 303627
The find function in repo.py calls sys.exit on error. Without this import that
call to exit will fail, masking the actual error message. This patch fixes that.
llvm-svn: 302584
Summary:
This patch introduces new SB APIs for tracing support
inside LLDB. The idea is to gather trace data from
LLDB and provide it through this APIs to external
tools integrating with LLDB. These tools will be
responsible for interpreting and presenting the
trace data to their users.
The patch implements the following new SB APIs ->
-> StartTrace - starts tracing with given parameters
-> StopTrace - stops tracing.
-> GetTraceData - read the trace data .
-> GetMetaData - read the meta data assosciated with the trace.
-> GetTraceConfig - read the trace configuration
Tracing is associated with a user_id that is returned
by the StartTrace API and this id needs to be used
for accessing the trace data and also Stopping
the trace. The user_id itself may map to tracing
the complete process or just an individual thread.
The APIs require an additional thread parameter
when the user of these APIs wishes to perform
thread specific manipulations on the tracing instances.
The patch also includes the corresponding
python wrappers for the C++ based APIs.
Reviewers: k8stone, lldb-commits, clayborg
Reviewed By: clayborg
Subscribers: jingham, mgorny
Differential Revision: https://reviews.llvm.org/D29581
llvm-svn: 301389
We currently display a list of all minimal cycles, but it's
useful to be able to see the big picture impact of these cycles
by merging them all together into groups of interconnected
components.
Because the cycle discovery algorithm only considers "minimal"
cycles, it discards all information for dependencies which are
not considered part of the minimal cycle. So all we know is that
the components of each island definitely all depend on each other
but it's still possible that there are hidden dependencies due
to transitive includes.
The cycle list should still be the authoritative reference for
deciding where the easiest places to break cycles are, though.
llvm-svn: 298530
When passing --discover-cycles and --show-counts, it displays
the number of dependencies between each hop of the cycle,
and sorts by the sum. Dependencies at the top of the list
should be the easiest to break.
llvm-svn: 298455
This analyzes the dependency graph and computes all minimal
cycles. Equivalent cycles that differ only by rotation are
excluded, as are cycles that are "super-cycles" of other
smaller cycles. For example, if we discover the cycle
A -> C -> A, and then later A -> B -> C -> D -> A, this latter
cycle is not considered. Thus, it is possible that after
eliminating some cycles, new ones will appear. However,
this is the only way to make the algorithm terminate in
a reasonable amount of time.
llvm-svn: 298324
1) Looks in Plugins and clang
2) Adds a mode to display the deps sorted by the number of times
the deps occurs in a particular project
llvm-svn: 297036
Some repos are not git repos, so git is expected
to fail. These errors should not go to stderr,
because Xcode interprets them as failures.
llvm-svn: 296924
LLDB has many branches in a variety of repositories.
The build-script.py file is subtly different for each set.
This is unnecessary and causes merge headaches.
This patch makes build-llvm.py consult a directory full
of .json files, each one of which matches a particular
branch using a regular expression.
This update to the patch introduces a FALLBACK file
whose contents take precedence if the current branch
could not be identified. If the current branch could be
identified, FALLBACK is updated, allowing the user to
e.g. cut branches off of known branches and still have
the automatic checkout mechanism work.
It also documents all of this.
Differential revision: https://reviews.llvm.org/D30275
llvm-svn: 295922
LLDB has many branches in a variety of repositories.
The build-script.py file is subtly different for each set.
This is unnecessary and causes merge headaches.
This patch makes build-llvm.py consult a directory full
of .json files, each one of which matches a particular
branch using a regular expression.
Differential revision: https://reviews.llvm.org/D30275
llvm-svn: 295897
Summary:
The current version of LLDB installs six.py into global python library directory. This approach produces conflicts downstream with distribution's py-six copy.
Introduce new configure option LLDB_USE_SYSTEM_SIX (disabled by default). Once specified as TRUE, six.py won't be installed to Python's directory.
Add new option in finishSwigWrapperClasses.py, namely --useSystemSix.
Sponsored by <The NetBSD Foundation>
Reviewers: mgorny, emaste, clayborg, joerg, labath
Reviewed By: labath
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29405
llvm-svn: 294071
print the path being requested.
Change the GetInfoItemByPathAsString docuemtnation in
the .i file to use docstring instead of autodoc so
the function signature is included in the python
help.
<rdar://problem/29999567>
llvm-svn: 293858
A combination of broken escaping in CMake and in the python swig
generation scripts meant that the swig generation step would fail
whenever there were spaces or special characters in parameters passed to
swig.
The fix for this in CMakeLists is to use the VERBATIM option on all
COMMAND-based custom builders relying on CMake to properly escape each
argument in the generated file.
Within the python swig scripts, the fix is to call subprocess.Popen with
a list of raw argument strings rather than ones that are incorrectly
manually escaped, then passed to a shell subprocess via
subprocess.Popen(' '.join(params)). This also prevents nasty things
happening such as accidental command-injection.
This allows us to have the swig / python executables in paths containing
special chars and spaces, (or on shared storage on Win32, e.g
\\some\path or C:\Program Files\swig\swig.exe).
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26757
llvm-svn: 289956
LLDB needs some minor changes to adopt PrettyStackTrace after https://reviews.llvm.org/D27683.
We remove our own SetCrashDescription() function and use LLVM-provided RAII objects instead.
We also make sure LLDB doesn't define __crashtracer_info__ which would collide with LLVM's definition.
Differential Revision: https://reviews.llvm.org/D27735
llvm-svn: 289711
Rationale:
scripts/Python/modules: android is excluded at a higher level, so no point in
checking here
tools/lldb-mi: lldb-mi builds fine (with some cosmetic tweaks) on android, and
there is no reason it shouldn't.
tools/lldb-server: LLDB_DISABLE_LIBEDIT/CURSES already take the platform into
account, so there is no point in checking again.
I am reasonably confident this should not break the build on any platform, but
I'll keep an eye out on the bots.
llvm-svn: 288661
I added a "thread-stop-format" to distinguish between the form
that is just the thread info (since the stop printing immediately prints
the frame info) and one with more frame 0 info - which is useful for
"thread list" and the like.
I also added a frame.no-debug boolean to the format entities so you can
print frame information differently between frames with source info and those
without.
This closes https://reviews.llvm.org/D26383.
<rdar://problem/28273697>
llvm-svn: 286288
Summary: This tool is only built on Darwin, and the name darwin-debug matches the Xcode project. We should have this in sync unless there is a good reason not to.
Reviewers: zturner, tfiala, labath
Subscribers: labath, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D25745
llvm-svn: 285356
Summary:
If Python is installed to a location that contains spaces
(e.g. "C:\Program Files\Python3") then the build fails while attempting
to run the modify-python-lldb.py script because the path to the Python
executable is not double-quoted before being passed to the shell. The
fix consists of letting Python handle the formatting of the command
line, since subprocess.Popen() is perfectly capable of handling paths
containing spaces if it's given the command and arguments as a list
instead of a single pre-formatted string.
Reviewers: zturner, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25396
llvm-svn: 284100
Summary:
This patch adds a CMake option LLDB_BUILD_FRAMEWORK, which builds libLLDB as a macOS framework instead of as a *nix shared library.
With this patch any LLDB executable that has the INCLUDE_IN_FRAMEWORK option set will be built into the Framework's resources directory, and a symlink to the exeuctable will be placed under the build directory's bin folder. Creating the symlinks allows users to run commands from the build directory without altering the workflow.
The framework generated by this patch passes the LLDB test suite, but has not been tested beyond that. It is not expected to be fully ready to ship, but it is a first step.
With this patch binaries that are placed inside the framework aren't being properly installed. Fixing that would increase the patch size significantly, so I'd like to do that in a follow-up.
Reviewers: zturner, tfiala
Subscribers: beanz, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D24749
llvm-svn: 282110
Jim Ingham