Summary:
The commit rL348922 introduced a means to set Metadata
section kind for a global variable, if its explicit section
name was prefixed with ".AMDGPU.metadata.".
This patch changes that prefix to ".AMDGPU.comment.",
as "metadata" in the section name might lead to
ambiguity with metadata used by AMD PAL runtime.
Change-Id: Idd4748800d6fe801441d91595fc21e5a4171e668
Reviewers: kzhuravl
Reviewed By: kzhuravl
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D56197
llvm-svn: 350292
A DBG_VALUE between a two-address instruction and a following COPY
would prevent rescheduleMIBelowKill optimization inside
TwoAddressInstructionPass.
Differential Revision: https://reviews.llvm.org/D55987
llvm-svn: 350289
The test cases are constructed to avoid folding the AND into a masked compare operation.
Currently we emit a KAND and a KORTEST for these cases.
llvm-svn: 350287
When switched to the MI scheduler for P9, the hardware is modeled as out of order.
However, inside the MI Scheduler algorithm, we still use the in-order scheduling model
as the MicroOpBufferSize isn't set. The MI scheduler take it as the hw cannot buffer
the op. So, only when all the available instructions issued, the pending instruction
could be scheduled. That is not true for our P9 hw in fact.
This patch is trying to enable the Out-of-Order scheduling model. The buffer size 44 is
picked from the P9 hw spec, and the perf test indicate that, its value won't hurt the cpu2017.
With this patch, there are 3 specs improved over 3% and 1 spec deg over 3%. The detail is as follows:
x264_r: +6.95%
cactuBSSN_r: +6.94%
lbm_r: +4.11%
xz_r: -3.85%
And the GEOMEAN for all the C/C++ spec in spec2017 is about 0.18% improved.
Reviewer: Nemanjai
Differential Revision: https://reviews.llvm.org/D55810
llvm-svn: 350285
INC/DEC are pretty much the same as ADD/SUB except that they don't update the C flag.
This patch removes the special nodes and just pattern matches from ADD/SUB during isel if the C flag isn't being used.
I had to avoid selecting DEC is the result isn't used. This will become a SUB immediate which will turned into a CMP later by optimizeCompareInstr. This lead to the one test change where we use a CMP instead of a DEC for an overflow intrinsic since we only checked the flag.
This also exposed a hole in our RMW flag matching use of hasNoCarryFlagUses. Our root node for the match is a store and there's no guarantee that all the flag users have been selected yet. So hasNoCarryFlagUses needs to check copyToReg and machine opcodes, but it also needs to check for the pre-match SETCC, SETCC_CARRY, BRCOND, and CMOV opcodes.
Differential Revision: https://reviews.llvm.org/D55975
llvm-svn: 350245
Currently we expand the two nodes separately. This gives DAG combiner an opportunity to optimize the expanded sequence taking into account only one set of users. When we expand the other node we'll create the expansion again, but might not be able to optimize it the same way. So the nodes won't CSE and we'll have two similarish sequences in the same basic block. By expanding both nodes at the same time we'll avoid prematurely optimizing the expansion until both the division and remainder have been replaced.
Improves the test case from PR38217. There may be additional opportunities after this.
Differential Revision: https://reviews.llvm.org/D56145
llvm-svn: 350239
By also promoting the input type we get a better idea for what scalar type to use. This can provide better results if the result of the extract is sign extended. What was previously happening is that the extract result would be legalized, sometime later the input of the sign extend would be legalized using the result of the extract. Then later the extract input would be legalized forcing a truncate into the input of the sign extend using a replace all uses. This requires DAG combine to combine out the sext/truncate pair. But sometimes we visited the truncate first and messed things up before the sext could be combined.
By creating the extract with the correct scalar type when we create legalize the result type, the truncate will be added right away. Then when the sign_extend input is legalized it will create an any_extend of the truncate which can be optimized by getNode to maybe remove the truncate. And then a sign_extend_inreg. Now DAG combine doesn't have to worry about getting rid of the extend.
This fixes the regression on X86 in D56156.
Differential Revision: https://reviews.llvm.org/D56176
llvm-svn: 350236
If x has multiple sign bits than it doesn't matter which one we extend from so we can sext from x's msb instead.
The X86 setcc-combine.ll changes are a little weird. It appears we ended up with a (sext_inreg (aext (trunc (extractelt)))) after type legalization. The sext_inreg+aext now gets optimized by this combine to leave (sext (trunc (extractelt))). Then we visit the trunc before we visit the sext. This ends up changing the truncate to an extractvectorelt from a bitcasted vector. I have a follow up patch to fix this.
Differential Revision: https://reviews.llvm.org/D56156
llvm-svn: 350235
PPCPreEmitPeephole pass.
PPCPreEmitPeephole will convert a BC to B when the conditional branch is
based on a constant CR by CRSET or CRUNSET. This is added in
https://reviews.llvm.org/rL343100.
When the conditional branch is known to be always taken, all branches will
be removed and a new unconditional branch will be inserted. However, when
SeenUse is false the original patch will not remove the branches, but still
insert the new unconditional branch, update the successors and create
inconsistent IR. Compiling the synthetic testcase included can show the
problem we run into.
The patch simply removes the SeenUse condition when adding branches into
InstrsToErase set.
Differential Revision: https://reviews.llvm.org/D56041
llvm-svn: 350223
Peek through shift modulo masks while matching double shift patterns.
I was hoping to delay this until I could remove the X86 code with generic funnel shift matching (PR40081) but this will do for now.
Differential Revision: https://reviews.llvm.org/D56199
llvm-svn: 350222
This was added at a time when i1 was a legal type with avx512f and there was a bug. i1 is no longer considered a legal type with avx512f so there should be no codegen difference.
llvm-svn: 350203
This makes it easier to keep the LowerBRCOND and LowerSELECT code in sync with LowerXALUO so they always pick the same operation for overflowing instructions.
This is inspired by the helper functions used by ARM and AArch64 for the same purpose.
The test change is because LowerSELECT was not in sync with LowerXALUO with regard to INC/DEC for SADDO/SSUBO.
llvm-svn: 350198
This was added at a time when i1 was a legal type with avx512f and there was a bug. i1 is no longer considered a legal type with avx512f so there should be no codegen difference.
llvm-svn: 350195
When SADDO/SSUBO is used as a part of a condition, the X86 backend has to lower the instruction twice. One for the flags use and then once for the data use. These two selections should be kept in sync so they end up with one node providing the data and the flags. This doesn't seem to be happening for INC/DEC.
llvm-svn: 350194
default
During the lowering of a switch that would result in the generation of a jump
table, a range check is performed before indexing into the jump table, for the
switch value being outside the jump table range and a conditional branch is
inserted to jump to the default block. In case the default block is
unreachable, this conditional jump can be omitted. This patch implements
omitting this conditional branch for unreachable defaults.
Review Reference: D52002
llvm-svn: 350186
Summary:
For SDAG, we pretend patchpoints aren't special at all until we emit the code for the pseudo.
Then the verifier runs and it seems like we have a use of an undefined register (the register will
be reserved later, but the verifier doesn't know that).
So this patch call setUsesTOCBasePtr before emit the code for the pseudo, so verifier can know
X2 is a reserved register.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D56148
llvm-svn: 350165
This seems to be getting in the way more than its helping. This does mean we stop scalarizing some cases, but I'm not convinced the scalarization was really better.
Some of the changes to vsel-cmp-load.ll are a regression but D56156 should fix it.
llvm-svn: 350159
This allows us to sign extend to v4i32 first. And then share that extension to implement the final steps to v4i64 using a pcmpgt and punpckl and punpckh.
We already do something similar for SIGN_EXTEND with -x86-experimental-vector-widening-legalization.
llvm-svn: 350158
A recent patch has added custom legalization of vector conversions of
v2i16 -> v2f64. This just rounds it out for other types where the input vector
has an illegal (narrower) type than the result vector. Specifically, this will
handle the following conversions:
v2i8 -> v2f64
v4i8 -> v4f32
v4i16 -> v4f32
Differential revision: https://reviews.llvm.org/D54663
llvm-svn: 350155
The current CRBIT spill pseudo-op expansion creates a KILL instruction
that kills the CRBIT and defines the enclosing CR field. However, this
paints a false picture to the register allocator that all bits in the CR
field are killed so copies of other bits out of the field become dead and
removable.
This changes the expansion to preserve the KILL flag on the CRBIT as an
implicit use and to treat the CR field as an undef input.
Thanks to Hal Finkel for the review and Uli Weigand for implementation input.
Differential revision: https://reviews.llvm.org/D55996
llvm-svn: 350153
This was tricking us into making these operations and then letting them get scalarized later. But I can't prove that the scalarized version is actually better.
llvm-svn: 350141
Previously we emitted a multiply and some masking that was supposed to matched to PMULUDQ, but the masking could sometimes be removed before we got a chance to match it. So instead just emit the PMULUDQ directly.
Remove the DAG combine that was added when the ReplaceNodeResults code was originally added. Add a new DAG combine to avoid regressions in shrink_vmul.ll
Some of the shrink_vmul.ll test cases now pick PMULUDQ instead of PMADDWD/PMULLD, but I think this should be an improvement on most CPUs.
I think all of this can go away if/when we switch to -x86-experimental-vector-widening-legalization
llvm-svn: 350134
This is the last one in a series of patches to support better code generation for bitfield insert.
BitPermutationSelector already support ISD::ZERO_EXTEND but not TRUNCATE.
This patch adds support for ISD:TRUNCATE in BitPermutationSelector.
For example of this test case,
struct s64b {
int a:4;
int b:16;
int c:24;
};
void bitfieldinsert64b(struct s64b *p, unsigned char v) {
p->b = v;
}
the selection DAG loos like:
t14: i32,ch = load<(load 4 from %ir.0)> t0, t2, undef:i64
t18: i32 = and t14, Constant:i32<-1048561>
t4: i64,ch = CopyFromReg t0, Register:i64 %1
t22: i64 = AssertZext t4, ValueType:ch:i8
t23: i32 = truncate t22
t16: i32 = shl nuw nsw t23, Constant:i32<4>
t19: i32 = or t18, t16
t20: ch = store<(store 4 into %ir.0)> t14:1, t19, t2, undef:i64
By handling truncate in the BitPermutationSelector, we can use information from AssertZext when selecting t19 and skip the mask operation corresponding to t18.
So the generated sequences with and without this patch are
without this patch
rlwinm 5, 5, 0, 28, 11 # corresponding to t18
rlwimi 5, 4, 4, 20, 27
with this patch
rlwimi 5, 4, 4, 12, 27
Differential Revision: https://reviews.llvm.org/D49076
llvm-svn: 350118
If we are changing the MI operand from Reg to Imm, we need also handle its implicit use if have.
Differential Revision: https://reviews.llvm.org/D56078
llvm-svn: 350115
For atomic value operand which less than 4 bytes need to be masked.
And the related operation to calculate the newvalue can be done in 32 bit gprc.
So just use gprc for mask and value calculation.
Differential Revision: https://reviews.llvm.org/D56077
llvm-svn: 350113
Create PMULDQ/PMULUDQ as long as the number of elements is a power of 2.
This seems to give some improvements in our ability to use SimplifyDemandedBits.
llvm-svn: 350084
The patch adds a possibility to make library calls on NVPTX.
An important thing about library functions - they must be defined within
the current module. This basically should guarantee that we produce a
valid PTX assembly (without calls to not defined functions). The one who
wants to use the libcalls is probably will have to link against
compiler-rt or any other implementation.
Currently, it's completely impossible to make library calls because of
error LLVM ERROR: Cannot select: i32 = ExternalSymbol '...'. But we can
lower ExternalSymbol to TargetExternalSymbol and verify if the function
definition is available.
Also, there was an issue with a DAG during legalisation. When we expand
instruction into libcall, the inner call-chain isn't being "integrated"
into outer chain. Since the last "data-flow" (call retval load) node is
located in call-chain earlier than CALLSEQ_END node, the latter becomes
a leaf and therefore a dead node (and is being removed quite fast).
Proposed here solution relies on another data-flow pseudo nodes
(ProxyReg) which purpose is only to keep CALLSEQ_END at legalisation and
instruction selection phases - we remove the pseudo instructions before
register scheduling phase.
Patch by Denys Zariaiev!
Differential Revision: https://reviews.llvm.org/D34708
llvm-svn: 350069
Add widen scalar for type index 1 (i1 condition) for G_SELECT.
Select G_SELECT for pointer, s32(integer) and smaller low level
types on MIPS32.
Differential Revision: https://reviews.llvm.org/D56001
llvm-svn: 350063
Summary:
This patch is to fix the bug imported by rL341634.
In above submit , the the return type of ISD::ADDE is
14224: SDVTList VTs = DAG.getVTList(MVT::i64, MVT::i64),
but in fact, the second return type of ISD::ADDE should be
MVT::Glue not MVT::i64.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D55977
llvm-svn: 350061
This is an alternative to what I attempted in D56057.
GetDemandedBits is a special version of SimplifyDemandedBits that allows simplifications even when the operand has other uses. GetDemandedBits will only do simplifications that allow a node to be bypassed. It won't create new nodes or alter any of the other users.
I had to add support for bypassing SIGN_EXTEND_INREG to GetDemandedBits.
Based on a patch that Simon Pilgrim sent me in email.
Fixes PR40142.
llvm-svn: 350059
It's dangerous to knowingly create an illegal vector type
no matter what stage of combining we're in.
This prevents the missed folding/scalarization seen in:
https://bugs.llvm.org/show_bug.cgi?id=40146
llvm-svn: 350034
Piotr Sobczak