This change fabricates linker script commands for the case where there is
no linker script SECTIONS to control address assignment. This permits us
to have a single Script->assignAddresses() function.
There is a small change in user-visible-behavior with respect to the
handling of .tbss SHT_NOBITS, SHF_TLS as the Script->assignAddresses()
requires setDot() to be called with monotically increasing addresses.
The tls-offset.s test has been updated so that the script and non-script
results match.
This change should make the non-script behavior of lld closer to an
equivalent linker script.
Differential Revision: https://reviews.llvm.org/D31888
llvm-svn: 300687
createHeader didn't use data members of Elf_Chdr type and write
directly to a given buffer. That is not a good practice because
the function had a knowledge of the struct layout.
llvm-svn: 300674
Patch implements --compress-debug-sections=zlib.
In compare with D20211 (a year old patch, abandoned), it implementation
uses streaming and fully reimplemented, does not support zlib-gnu for
simplification.
This is PR32308.
Differential revision: https://reviews.llvm.org/D31941
llvm-svn: 300444
Imagine next script:
SECTIONS { BYTE(0x11); }
Section content written to disk will be 0x11. Previous LLD behavior was to make this
section SHT_NOBITS. What is not correct because section has content.
ld.bfd makes such sections SHT_PROGBITS, this patch do the same.
This fixes PR32537
Differential revision: https://reviews.llvm.org/D32016
llvm-svn: 300317
This fixes an assertion `Align != 0u && "Align can't be 0."'
in llvm::alignTo() when a linker script references a globally
defined variable in an ALIGN() context.
Patch by Alexander Richardson !
Differential revision: https://reviews.llvm.org/D31984
llvm-svn: 300315
Start using it in LLD to avoid needing to read bitcode again just to get the
target triple, and in llvm-lto2 to avoid printing symbol table information
that is inappropriate for the target.
Differential Revision: https://reviews.llvm.org/D32038
llvm-svn: 300300
We generally want to use uint64_t instead of uintX_t if the 64-bit
type works for both 32-bit and 64-bit because it is simpler than
the variable-size type.
llvm-svn: 300293
"read" is used as a prefix for functions that read tokens from input
streams. This function doesn't really read anything, but just parses
a given string as an integer, so rename.
llvm-svn: 300281
Replace addModuleReloc with AddTlsReloc so that we can use it for both the
module relocation and the offset relocation.
Differential Revision: https://reviews.llvm.org/D31751
llvm-svn: 300192
ARM Exception Index Table sections .ARM.exidx have an implicit dependency
on code sections via SHF_LINK_ORDER. When code sections are folded by ICF
we must mark the unique .ARM.exidx table that describes it as not live
to prevent an illegal entry in the exception table.
Note that we do not try and follow the relocations from the .ARM.exidx
section to the .ARM.extab sections to mark these as not live. Leaving
these sections is not a correctness problem. In theory these could be
removed via an application of garbage collection.
Fixes https://bugs.llvm.org/show_bug.cgi?id=32614
Differential Revision: https://reviews.llvm.org/D31932
llvm-svn: 300182
RELRO is a feature to make segments read-only after dynamic relocations
are applied. It is different from read-only segments because RELRO is
initially writable. And of course RELRO is different from writable
segments.
RELRO is not a very well known feature. We have a series of checks to
make a decision whether a section should be in a RELRO segment or not,
but we didn't describe why. This patch adds comments to explain how
that decision is made.
llvm-svn: 300176
Previously, we allowed only integers in this context. Now you can
write expressions there. LLD is now able to handle the following
linker, for example.
MEMORY { rom (rx) : ORIGIN = (1024 * 1024) }
llvm-svn: 300131
Fixes PR32572.
When
(a) a library has no soname
and (b) library is given on the command line with path (and not through -L/-l flags)
DT_NEEDED entry for such library keeps the path as given.
This behavior is consistent with gold and bfd, and is used in compiler-rt test suite.
This is a second attempt after r300007 got reverted. This time relro-omagic test is
changed in a way to avoid hardcoding the path to the test directory in the objdump'd
binary.
llvm-svn: 300011
Fixes PR32572.
When
(a) a library has no soname
and (b) library is given on the command line with path (and not through -L/-l flags)
DT_NEEDED entry for such library keeps the path as given.
This behavior is consistent with gold and bfd, and is used in compiler-rt test suite.
llvm-svn: 300007
Previously we silently produced broken output for R_386_GOT32X/R_386_GOT32
relocations if they were used to compute the address of the symbol’s global
offset table entry without base register when position-independent code is disabled.
Situation happened because of recent ABI changes. Released ABI mentions that
R_386_GOT32X can be calculated in a two different ways (so we did not follow ABI here
before this patch), but draft ABI also mentions R_386_GOT32 relocation here.
We should use the same calculations for both relocations.
Problem is that we always calculated them as G + A - GOT (offset from end of GOT),
but for case when PIC is disabled, according to i386 ABI calculation should be G + A,
what should produce just an address in GOT finally.
ABI: https://github.com/hjl-tools/x86-psABI/wiki/intel386-psABI-draft.pdf (p36, p60).
llvm-svn: 299812
Both functions always use the same GOT sections In<ELFT>::Got and
In<ELFT>::MipsGot respectively, so we do not need to pass them as an
argument.
llvm-svn: 299773
When the target of the TlsOffsetRel is non-preemptible we can write the
offset directly into the GOT without needing a dynamic relocation. This
is optional for dynamically linked executables but is required for static
linking.
This change adds the relocation to the GOT entry and a test case for
non-0 offsets so that if we miss out the offset the test won't spuriously
pass by virtue of the default value being 0.
Differential Revision: https://reviews.llvm.org/D31749
llvm-svn: 299751
The handleNoRelaxTlsRelocation handled both ARM and Mips as at a
high-level the actions of what to do when encountering a local dynamic or
global dynamic TLS relocation are the same. However due to Mips using a
custom GOT the differences of the implementation are enough that the
function became difficult to understand.
This change replaces handleNotRelaxTlsRelocation into
handleARMTlsRelocation() and handleMipsTlsRelocation() so that the ARM and
Mips specific code is isolated.
Differential Revision: https://reviews.llvm.org/D31748
llvm-svn: 299750
Executable sections should not be padded with zero by default. On some
architectures, 0x00 is the start of a valid instruction sequence, so can confuse
disassembly between InputSections (and indeed the start of the next InputSection
in some situations). Further, in the case of misjumps into padding, padding may
start to be executed silently.
On x86, the "0xcc" byte represents the int3 trap instruction. It is a single
byte long so can serve well as padding. This change switches x86 (and x86_64) to
use this value for padding in executable sections, if no linker script directive
overrides it. It also puts the behaviour into place making it easy to change the
behaviour of other targets when desired. I do not know the relevant instruction
sequences for trap instructions on other targets however, so somebody should add
this separately.
Because the old behaviour simply wrote padding in the whole section before
overwriting most of it, this change also modifies the padding algorithm to write
padding only where needed. This in turn has caused a small behaviour change with
regards to what values are written via Fill commands in linker scripts, bringing
it into line with ld.bfd. The fill value is now written starting from the end of
the previous block, which means that it always starts from the first byte of the
fill, whereas the old behaviour meant that the padding sometimes started mid-way
through the fill value. See the test changes for more details.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D30886
Bugzilla: http://bugs.llvm.org/show_bug.cgi?id=32227
llvm-svn: 299635
scanRelocs() does a lot of things. It fills InputSection's Relocations vector,
making a decision whether a TLS relocation should be relaxed or not,
and making a decision whether a GOT/PLT slot needs to be created or not.
They don't actually have to be done in a single loop. I want to separate
them so that some of them can be run concurently. As a first step, this
patch moves PLT/GOT slot assignment to beginning of the loop, so that
they just fall through to the next statements. This should make it clear
that that code doesn't affect other parts of the loop.
llvm-svn: 299615
Relocations are abstracted as platform-independent R_TLS_* relocations,
so we don't need to check platform-specific ones to see if a relocation
is TLS GD.
llvm-svn: 299614