Fixed an issue with the symbol table parsing of files that have STAB entries in them where there are two N_SO entries where the first has a directory, and the second contains a full path:
[ 0] 00000002 64 (N_SO ) 00 0000 0000000000000000 '/Volumes/data/src/'
[ 1] 0000001e 64 (N_SO ) 00 0000 0000000000000000 '/Volumes/data/src/Source/main.m'
[ 2] 00000047 66 (N_OSO ) 09 0001 000000004fc642d2 '/tmp/main.o'
[ 3] 00000001 2e (N_BNSYM ) 01 0000 0000000000003864
[ 4] 000000bd 24 (N_FUN ) 01 0000 0000000000003864 '_main'
[ 5] 00000001 24 (N_FUN ) 00 0000 00000000000000ae
[ 6] 00000001 4e (N_ENSYM ) 01 0000 00000000000000ae
[ 7] 00000001 64 (N_SO ) 01 0000 0000000000000000
We now correctly combine entries 0 and 1 into a single entry.
llvm-svn: 157712
setting breakpoints. That's dangerous, since while we are setting a breakpoint,
the target might hit the dyld load notification, and start removing modules from
the list. This change adds a GetMutex accessor to the ModuleList class, and
uses it whenever we are accessing the target's ModuleList (as returned by GetImages().)
<rdar://problem/11552372>
llvm-svn: 157668
A local std::string was being filled in and then the function would return "s.c_str()".
A local StreamString (which contains a std::string) was being filled in, and essentially also returning the c string from the std::string, though it was in a the StreamString class.
The fix was to not do this by passing a stream object into StringList::Join() and fix the "arch_helper()" function to do what it should: cache the result in a global.
llvm-svn: 157519
Make 'help arch' return the list of supported architectures.
Add a convenience method StringList::Join(const char *separator) which is called from the help function for 'arch'.
Also add a simple test case.
llvm-svn: 157507
these functions will end in the sequence
mov %rbp, %rsp
ret
call __stack_chk_fail
instead of the usual mov, ret. The x86 assembly profiler only looked
for functions ending in 'ret' and added the Unwind row describing how to
set the CFA based on that -- the addition of the call insn (which is jumped
to earlier in the function body) threw off that inspection.
Resolves the need to "step" twice to get out of these functions when doing
source-level stepping.
<rdar://problem/11469705>
llvm-svn: 157454
Sending async packets can deadlock a program on darwin. We currently allow breakpoint packets and memory read/write packets (for software breakpoints) to be sent while a program is running. In the GDB remote plug-in, we will interrupt the run, send the async packet and resume (currently with the continue packet that caused the program to resume). If the GDB server supports the "vCont" packet, we might have initially continued with each thread stating it should continue. If new threads show up while we are stopped, which happend when running GCD, we can end up with new threads that we aren't mentioning in the continue list. So we start with a thread list of 1,2,3 and continue:
continue thread 1, continue thread 2, continue thread 3
Now we interrupt and set a breakpoint and we actually have threads 1,2,3,4 now when we are about to resume, yet we send:
continue thread 1, continue thread 2, continue thread 3
Any thread that isn't mentioned is currently going to stay suspended. This causes the deadlock.
llvm-svn: 157439
Supports the use-case scenario of immediately continuing the process once attached.
Add a simple completion test case from "process attach --con" to "process attach --continue ".
llvm-svn: 157361
Add default Process::GetWatchpointSupportInfo() impl which returns an error of "not supported".
Add "qWatchpointSupportInfo" packet to the gdb communication layer to support this, and modify TestWatchpointCommands.py to test it.
llvm-svn: 157345
the value_regs field, which is useful for future expansion purposes. As of now, we have:
calculated_offset_of_eax = offset_of_rax + (offset_of_eax_from_the_descriptor which is 0)
llvm-svn: 157275
Add convenience registers eax, ebx, ecx, edx, edi, esi, ebp, esp to the 'register read' command for x86_64.
Add a GDBRemoteRegisterContext::Addx86_64ConvenienceRegisters() method called from ProcessGDBRemote::BuildDynamicRegisterInfo().
Servicing of eax, for example, is accomplished by delegating to rax with an adjusted offset into the register context.
llvm-svn: 157230
"break set" commands to set this per breakpoint. Also, some CreateBreakpoint API's in the lldb_private
namespace had "internal" first and "skip_prologue" second. "internal should always be last. Fixed that.
rdar://problem/11484729
llvm-svn: 157225
(actually, mainly just hooked up support that was already
there). Added a test case, although it's expected to fail
right now unless you're using top-of-tree LLVM.
llvm-svn: 157220
<rdar://problem/11455913>
"target symbol add" should flush the cached frames
"register write" should flush the thread state in case registers modifications change stack
llvm-svn: 157042
For "process attach", make the success criterion as the inferior changes its state to eStateStopped.
Otherwise, mark it as a failure and say so.
llvm-svn: 157036
The "run" and "r" aliases were for gdb compatability, so make then do what GDB does by default: launch in a shell.
For those that don't want launching with a shell by default, add the following to your ~/.lldbinit file:
command unalias run
command unalias r
command alias r process launch --
command alias run process launch --
llvm-svn: 157028
boxed expressions returning numbers and strings.
I also added boxed expressions to our testcases, and
enabled boxed expressions when libarclite is linked into
the inferior.
llvm-svn: 157026
path on rerunning, evict the old module from the target module list, inform the breakpoints
about this so they can do something intelligent as well.
rdar://problem/11273043
llvm-svn: 157008
TestBackticksWithoutATarget.BackticksWithNoTargetTestCase was calling
GetDummyTarget() when executing for x86_64. When performing session
tearDown, it would get destroyed (and everything would be invalid (arch,
etc).
Then the test would run for i386. The dummy target wasn't being
reinitialized and was invalid. lldb complained that 'current process state
is unsuitable for expression parsing'.
llvm-svn: 156994
various other syntactic sugar work. Lambdas do
not due to some problems relocating code containing
lambdas. Rvalue references work when returned from
expressions, but need more testing.
llvm-svn: 156948
Make sure our debugger STDIN read thread shuts down quickly when we are done with it. We had a case where the owner of the file handle was not closing it and caused spins.
llvm-svn: 156879
Add "--name" option to "image lookup" that will search both functions and symbols.
Also made all of the output from any of the "image lookup" commands be the same regardless of the lookup type (function name, symbol name, func or symbol, file and line, address, etc). The --verbose or -v option also will expand the results as needed and display things so they look the same.
llvm-svn: 156835
that dynamically discovers remote register context information.
o GDBRemoteRegisterContext.h:
Change the prototype of HardcodeARMRegisters() to take a boolean flag, which now becomes
void
HardcodeARMRegisters(bool from_scratch);
o GDBRemoteRegisterContext.cpp:
HardcodeARMRegisters() now checks the from_scratch flag and decides whether to add composite registers to the already
existing primordial registers based on a table called g_composites which describes the composite registers.
o ProcessGDBRemote.cpp:
Modify the logic of ProcessGDBRemote::BuildDynamicRegisterInfo() to call m_register_info.HardcodeARMRegisters()
with the newly introduced 'bool from_scrach' flag.
rdar://problem/10652076
llvm-svn: 156773
"lldb -a i386" doesn't set the calculator mode correctly if run on a 64 bit system.
The previous logic always used the current host architecture, not the default architecture. The default arch gets set into a static varaible in lldb_private::Target when an arch is set from the command line:
lldb -a i386
We now use the default arch correctly.
llvm-svn: 156680
Also changed the defaults for SBThread::Step* to not delete extant plans.
Also added some test cases to test more complex stepping scenarios.
llvm-svn: 156667
Fixed the DisassemblerLLVMC disassembler to parse more efficiently instead of parsing opcodes over and over. The InstructionLLVMC class now only reads the opcode in the InstructionLLVMC::Decode function. This can be done very efficiently for ARM and architectures that have fixed opcode sizes. For x64 it still calls the disassembler to get the byte size.
Moved the lldb_private::Instruction::Dump(...) function up into the lldb_private::Instruction class and it now uses the function that gets the mnemonic, operandes and comments so that all disassembly is using the same code.
Added StreamString::FillLastLineToColumn() to allow filling a line up to a column with a character (which is used by the lldb_private::Instruction::Dump(...) function).
Modified the Opcode::GetData() fucntion to "do the right thing" for thumb instructions.
llvm-svn: 156532
the controlling plans so that they don't lose control.
Also change "ThreadPlanStepThrough" to take the return StackID for its backstop breakpoint as an argument
to the constructor rather than having it try to figure it out itself, since it might get it wrong whereas
the caller always knows where it is coming from.
rdar://problem/11402287
llvm-svn: 156529
On Lion, because the rights initially doesn't exist in /etc/authorization, if an admin user logs in and uses lldb within the first 5 minutes, it is possible to do AuthorizationCopyRights on LaunchUsingXPCRightName and get the rights back. As another security measure, we make sure that the LaunchUsingXPCRightName rights actually exists.
Removed Xcode as the user of the XPC service to shrink the security surface area.
llvm-svn: 156424
We make sure that if the user cancels out of the authentication dialog to add 'com.apple.lldb.LaunchUsingXPC' rights to /etc/authorization, we don't try to do AuthorizationCopyRights.
As well, refactored a bit so that control flow is easier to read for other folks. Added more comments.
llvm-svn: 156423
Fixed the command callback override lookup function so we can now override the "process launch" command (or any other multi-word commands).
llvm-svn: 156368
Switch over to the "*-apple-macosx" for desktop and "*-apple-ios" for iOS triples.
Also make the selection process for auto selecting platforms based off of an arch much better.
llvm-svn: 156354
Correctly specify the LLDB_OPT_SET's that the 'shlib' command option belongs to by using a newly added macro like this:
#define LLDB_OPT_NOT_10 ( LLDB_OPT_SET_FROM(1, 10) & ~LLDB_OPT_SET_10 )
rdar://problem/11393864
llvm-svn: 156337
No one was using it and Locker(pthread_mutex_t *) immediately asserts for
pthread_mutex_t's that don't come from a Mutex anyway. Rather than try to make
that work, we should maintain the Mutex abstraction and not pass around the
platform implementation...
Make Mutex::Locker::Lock take a Mutex & or a Mutex *, and remove the constructor
taking a pthread_mutex_t *. You no longer need to call Mutex::GetMutex to pass
your mutex to a Locker (you can't in fact, since I made it private.)
llvm-svn: 156221
Rework the Host.cpp::ThreadNameAccessor to use ThreadSafeSTLMap - we've got it so we might as well use it. Also works around a problem with the
Mutex::Locker class raising fallacious asserts in debug mode when used with pthread_mutex_t's that weren't backed by Mutex objects.
llvm-svn: 156193
us of its architecture, use that to set the Target's arch if it
doesn't already have one set.
In Process::CompleteAttach(), if the Target has a valid arch make
sure that the Platform we pick up is compatible with that arch; if
not, find a Platform that is compatible. Don't let the the default
platform override the Target's arch.
<rdar://problem/11185420>
llvm-svn: 156116
should be MasterPlans that want to stay on the plan stack. So make all plans NOT
MasterPlans by default and then have the SB API's and the CommandObjectThread step
commands set this explicitly.
Also added a "clean up" phase to the Thread::ShouldStop so that if plans get stranded
on the stack, we can remove them. This is done by adding an IsPlanStale method to the
thread plans, and if the plan can know that it is no longer relevant, it returns true,
and the plan and its sub-plans will get discarded.
llvm-svn: 156101
since we now run the condition in the StopInfoBreakpoint's PerformAction, and don't need
to refer it to another "continue". Actually, we haven't needed to do this for a year or
so, I just hadn't gotten around to deleting the dead wood.
llvm-svn: 155967
Just call SBDebugger::SetTerminalWidth on the driver's SBDebugger, which does the same job, but no locks.
Also add the value checking to SetTerminalWidth you get with SetInternalVariable(..., "term-width", ...).
rdar://problem/11310563
llvm-svn: 155665
ones, to its own constant pool. This reflects the fact
that the LLVM code generators for different targets move
floats to their constant pools under varying conditions,
and the JIT cannot (yet) be relied upon to relocate references to
its constant pool correctly.
llvm-svn: 155660
<rdar://problem/11285931>
Use the DWARRF end prologue markers when trying to skip prologue instructions instead of blindly using the second line table address entry.
llvm-svn: 155600
ObjCPlusPlus as Objective-C classes. Really the
compiler should say they have Objective-C runtime
class, but we should be a little more resilient
(we were refusing to find ivars in those classes
before).
Also added a test case.
llvm-svn: 155515
Fixed an issue that would happen when using debug map with DWARF in the .o files where we wouldn't ever track down the actual definition for a type when things were in namespaces. We now serialize the decl context information into an intermediate format which allows us to track down the correct definition for a type regardless of which DWARF symbol file it comes from. We do this by creating a "DWARFDeclContext" object that contains the DW_TAG + name for each item in a decl context which we can then use to veto potential accelerator table matches. For example, the accelerator tables store the basename of the type, so if you have "std::vector<int>", we would end up with an accelerator table entry for the type that contained "vector<int>", which we would then search for using a DWARFDeclContext object that contained:
[0] DW_TAG_class_type "vector<int>"
[1] DW_TAG_namespace "std"
This is currently used to track down forward declarations for things like "class a:🅱️:Foo;".
llvm-svn: 155488
doesn't return a result. If that expression can't
be run in the current context (for example, if it
uses a function and there is no running process)
then we used to try to destroy the nonexistent
result variable. We now only destroy the result
variable if we actually made one.
llvm-svn: 155455
This worked correctly for 64-bit targets, but broke down data formatters in i386 mode. The formatters would try to read pointers out of the frozen-dried objects,
but were unable to do so because they would try fetching 8 bytes from a DataExtractor with only 4 bytes in it. This patch fixes the issue by always making the pointer-size
for a DataExtractor match the target setting.
llvm-svn: 155418
Fixed an issue where we get NULL compile units back from the symbol vendor. We need symbol vendors to be able to quickly give an estimate of the compile units that they have without having to fully vette them first, so anyone getting compile units from a module should be able to deal with a NULL compile unit being returned for a given index.
llvm-svn: 155398
Filipe Cabecinhas