to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
These are all benign races and only visible in !NDEBUG. tsan complains
about it, but a simple atomic bool is sufficient to make it happy.
llvm-svn: 335823
This patch adds support for the q versions of the dup
(load-to-all-lanes) NEON intrinsics, such as vld2q_dup_f16() for
example.
Currently, non-q versions of the dup intrinsics are implemented
in clang by generating IR that first loads the elements of the
structure into the first lane with the lane (to-single-lane)
intrinsics, and then propagating it other lanes. There are at
least two problems with this approach. First, there are no
double-spaced to-single-lane byte-element instructions. For
example, there is no such instruction as 'vld2.8 { d0[0], d2[0]
}, [r0]'. That means we cannot rely on the to-single-lane
intrinsics and instructions to implement the q versions of the
dup intrinsics. Note that to-all-lanes instructions do support
all sizes of data items, including bytes.
The second problem with the current approach is that we need a
separate vdup instruction to propagate the structure to each
lane. So for vld4q_dup_f16() we would need four vdup instructions
in addition to the initial vld instruction.
This patch introduces dup LLVM intrinsics and reworks handling of
the currently supported (non-q) NEON dup intrinsics to expand
them into those LLVM intrinsics, thus eliminating the need for
using to-single-lane intrinsics and instructions.
Additionally, this patch adds support for u64 and s64 dup NEON
intrinsics. These are marked as Arch64-only in the ARM NEON
Reference, but it seems there are no reasons to not support them
in AArch32 mode. Please correct, if that is wrong.
That's what we generate with this patch applied:
vld2q_dup_f16:
vld2.16 {d0[], d2[]}, [r0]
vld2.16 {d1[], d3[]}, [r0]
vld3q_dup_f16:
vld3.16 {d0[], d2[], d4[]}, [r0]
vld3.16 {d1[], d3[], d5[]}, [r0]
vld4q_dup_f16:
vld4.16 {d0[], d2[], d4[], d6[]}, [r0]
vld4.16 {d1[], d3[], d5[], d7[]}, [r0]
Differential Revision: https://reviews.llvm.org/D48439
llvm-svn: 335733
We currently support them only in AArch64. The NEON Reference,
however, says they are 'ARMv7, ARMv8' intrinsics.
Differential Revision: https://reviews.llvm.org/D47447
llvm-svn: 334361
We currently support them only in AArch64. The NEON Reference,
however, says they are 'ARMv7, ARMv8' intrinsics.
Differential Revision: https://reviews.llvm.org/D47120
llvm-svn: 333825
We currently support them only in AArch64. The NEON Reference,
however, says they are 'ARMv7, ARMv8' intrinsics.
Differential Revision: https://reviews.llvm.org/D47121
llvm-svn: 333819
Code generation of VLD3, VLD4, VST3 and VST4 with register writeback is
broken due to 2 separate bugs:
1) VLD1d64TPseudoWB_register and VLD1d64QPseudoWB_register are missing
rules to expand them to non pseudo MIR. These are selected for
ARMISD::VLD3_UPD/VLD4_UPD with v1i64 vectors in SelectVLD.
2) Selection of the right VLD/VST instruction is broken for load and
store of 3 and 4 v1i64 vectors. SelectVLD and SelectVST are called
with MIR opcode for fixed writeback (ie increment is access size)
and call getVLDSTRegisterUpdateOpcode() to select an opcode with
register writeback if base register update is of a different size.
Since getVLDSTRegisterUpdateOpcode() only knows about
VLD1/VLD2/VST1/VST2 the call is currently conditional on the number
of element in the vector.
However, VLD1/VST1 is selected by SelectVLD/SelectVST's caller for
load and stores of 3 or 4 v1i64 vectors. Therefore the opcode is not
updated which later lead to a fixed writeback instruction being
constructed with an extra operand for the register writeback.
This patch addresses the two issues as follows:
- it adds the necessary mapping from VLD1d64TPseudoWB_register and
VLD1d64QPseudoWB_register to VLD1d64Twb_register and
VLD1d64Qwb_register respectively. Like for the existing _fixed
variants, the cost of these is bumped for unaligned access.
- it changes the logic in SelectVLD and SelectVSD to call isVLDfixed
and isVSTfixed respectively to decide whether the opcode should be
updated. It also reworks the logic and comments for pushing the
writeback offset operand and r0 operand to clarify the logic:
writeback offset needs to be pushed if it's a register writeback,
r0 needs to be pushed if not and the instruction is a
VLD1/VLD2/VST1/VST2.
Reviewers: rengolin, t.p.northover, samparker
Reviewed By: samparker
Patch by Thomas Preud'homme <thomas.preudhomme@arm.com>
Differential Revision: https://reviews.llvm.org/D42970
llvm-svn: 326570
Summary:
Add a target option AllowRegisterRenaming that is used to opt in to
post-register-allocation renaming of registers. This is set to 0 by
default, which causes the hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq
fields of all opcodes to be set to 1, causing
MachineOperand::isRenamable to always return false.
Set the AllowRegisterRenaming flag to 1 for all in-tree targets that
have lit tests that were effected by enabling COPY forwarding in
MachineCopyPropagation (AArch64, AMDGPU, ARM, Hexagon, Mips, PowerPC,
RISCV, Sparc, SystemZ and X86).
Add some more comments describing the semantics of the
MachineOperand::isRenamable function and how it is set and maintained.
Change isRenamable to check the operand's opcode
hasExtraSrcRegAllocReq/hasExtraDstRegAllocReq bit directly instead of
relying on it being consistently reflected in the IsRenamable bit
setting.
Clear the IsRenamable bit when changing an operand's register value.
Remove target code that was clearing the IsRenamable bit when changing
registers/opcodes now that this is done conservatively by default.
Change setting of hasExtraSrcRegAllocReq in AMDGPU target to be done in
one place covering all opcodes that have constant pipe read limit
restrictions.
Reviewers: qcolombet, MatzeB
Subscribers: aemerson, arsenm, jyknight, mcrosier, sdardis, nhaehnle, javed.absar, tpr, arichardson, kristof.beyls, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, niosHD, escha, nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D43042
llvm-svn: 325931
Summary:
Add isRenamable() predicate to MachineOperand. This predicate can be
used by machine passes after register allocation to determine whether it
is safe to rename a given register operand. Register operands that
aren't marked as renamable may be required to be assigned their current
register to satisfy constraints that are not captured by the machine
IR (e.g. ABI or ISA constraints).
Reviewers: qcolombet, MatzeB, hfinkel
Subscribers: nemanjai, mcrosier, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D39400
llvm-svn: 320503
Summary:
This fixes PR35221.
Use pseudo-instructions to let MachineCSE hoist global address computation.
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D39871
llvm-svn: 318081
Tail merging can convert an undef use into a normal one when creating a
common tail. Doing so can make the register live out from a block which
previously contained the undef use. To keep the liveness up-to-date,
insert IMPLICIT_DEFs in such blocks when necessary.
To enable this patch the computeLiveIns() function which used to
compute live-ins for a block and set them immediately is split into new
functions:
- computeLiveIns() just computes the live-ins in a LivePhysRegs set.
- addLiveIns() applies the live-ins to a block live-in list.
- computeAndAddLiveIns() is a convenience function combining the other
two functions and behaving like computeLiveIns() before this patch.
Based on a patch by Krzysztof Parzyszek <kparzysz@codeaurora.org>
Differential Revision: https://reviews.llvm.org/D37034
llvm-svn: 312668
Missing these could potentially screw up post-ra scheduling.
Issue found by inspection, so I don't have a real testcase. Included
test just verifies the expected operands after expansion.
Differential Revision: https://reviews.llvm.org/D35156
llvm-svn: 312589
Support the selection of G_GLOBAL_VALUE in the PIC relocation model. For
simplicity we use the same pseudoinstructions for both Darwin and ELF:
(MOV|LDRLIT)_ga_pcrel(_ldr).
This is new for ELF, so it requires a small update to the ARM pseudo
expansion pass to make sure it adds the correct constant pool modifier
and add-current-address in the case of ELF.
Differential Revision: https://reviews.llvm.org/D36507
llvm-svn: 311992
ARMv4 doesn't support the "BX" instruction, which has been introduced
with ARMv4t. Adjust the call lowering and tail call implementation
accordingly.
Further changes are necessary to ensure that presence of the v4t feature
is correctly set. Most importantly, the "generic" CPU for thumb-*
triples should include ARMv4t, since thumb mode without thumb support
would naturally be pointless.
Add a couple of asserts to ensure thumb instructions are not emitted
without CPU support.
Differential Revision: https://reviews.llvm.org/D37030
llvm-svn: 311921
Clean up after my misguided attempt in r304267 to "fix" CMP_SWAP
returning an uninitialized status value.
- I was always using tMOVi8 to zero the status register which cannot
encode higher register numbers and llvm would silently miscompile)
- Nobody was ever looking at that status value outside the expansion.
ARMDAGToDAGISel::SelectCMP_SWAP() the only place creating CMP_SWAP
instructions was not mapping anything to it. (The cmpxchg status value
from llvm IR is lowered to a manual comparison after the CMP_SWAP)
So this:
- Renames the register from "status" to "temp" it make it obvious that
it isn't used outside the expansion.
- Remove the zeroing status/temp register.
- Keep the live-in list improvements from r304267
Fixes http://llvm.org/PR34056
llvm-svn: 310534
This is the equivalent of r304048 for ARM:
- Rewrite livein calculation to use the computeLiveIns() helper
function. This is slightly less efficient but easier to reason about
and doesn't unnecessarily add pristine and reserved registers[1]
- Zero the status register at the beginning of the loop to make sure it
has a defined value.
- Remove kill flags of values that need to stay alive throughout the loop.
[1] An upcoming commit of mine will tighten the MachineVerifier to catch
these.
llvm-svn: 304267
Summary:
Some targets need to be able to do more complex rendering than just adding an
operand or two to an instruction. For example, it may need to insert an
instruction to extract a subreg first, or it may need to perform an operation
on the operand.
In SelectionDAG, targets would create SDNode's to achieve the desired effect
during the complex pattern predicate. This worked because SelectionDAG had a
form of garbage collection that would take care of SDNode's that were created
but not used due to a later predicate rejecting a match. This doesn't translate
well to GlobalISel and the churn was wasteful.
The API changes in this patch enable GlobalISel to accomplish the same thing
without the waste. The API is now:
InstructionSelector::OptionalComplexRendererFn selectArithImmed(MachineOperand &Root) const;
where Root is the root of the match. The return value can be omitted to
indicate that the predicate failed to match, or a function with the signature
ComplexRendererFn can be returned. For example:
return OptionalComplexRendererFn(
[=](MachineInstrBuilder &MIB) { MIB.addImm(Immed).addImm(ShVal); });
adds two immediate operands to the rendered instruction. Immed and ShVal are
captured from the predicate function.
As an added bonus, this also reduces the amount of information we need to
provide to GIComplexOperandMatcher.
Depends on D31418
Reviewers: aditya_nandakumar, t.p.northover, qcolombet, rovka, ab, javed.absar
Reviewed By: ab
Subscribers: dberris, kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D31761
llvm-svn: 301079
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
llvm-svn: 297782
Support lowering AEABI TLS access (__aeabi_read_tp) with long calls.
This requires adjusting the call sequence to use an indirect call to get
full addressability.
Resolves PR31769!
llvm-svn: 293433
Hunt down some of the places where we use bare addReg(0) or addImm(AL).addReg(0)
and replace with add(condCodeOp()) and add(predOps()). This should make it
easier to understand what those operands represent (without having to look at
the definition of the instruction that we're adding to).
Differential Revision: https://reviews.llvm.org/D27984
llvm-svn: 292587
Replace all uses of AddDefaultCC with add(condCodeOp()).
The transformation has been done automatically with a custom tool based on Clang
AST Matchers + RefactoringTool.
Differential Revision: https://reviews.llvm.org/D28557
llvm-svn: 291893
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
Replace all uses of AddDefaultPred with MachineInstrBuilder::add(predOps()).
This makes the code building MachineInstrs more readable, because it allows us
to write code like:
MIB.addSomeOperand(blah)
.add(predOps())
.addAnotherOperand(blahblah)
instead of
AddDefaultPred(MIB.addSomeOperand(blah))
.addAnotherOperand(blahblah)
This commit also adds the predOps helper in the ARM backend, as well as the add
method taking a variable number of operands to the MachineInstrBuilder.
The transformation has been done mostly automatically with a custom tool based
on Clang AST Matchers + RefactoringTool.
Differential Revision: https://reviews.llvm.org/D28555
llvm-svn: 291890
Summary:
This patch fixes comparison of 64-bit atomic with its expected value in CMP_SWAP_64 expansion.
Currently, the low words are compared with CMP, while the high words are compared with SBC. SBC expects the carry flag to be set if CMP detects a difference. CMP might leave the carry unset for unequal arguments though if the first one is >= than the second. This might cause the comparison logic to detect false equality.
Example of the broken C++ code:
```
std::atomic<long long> at(2);
long long ll = 1;
std::atomic_compare_exchange_strong(&at, &ll, 3);
```
Even though the atomic `at` and the expected value `ll` are not equal and `atomic_compare_exchange_strong` returns `false`, `at` is changed to 3.
The patch replaces SBC with CMPEQ.
Reviewers: t.p.northover
Subscribers: aemerson, rengolin, llvm-commits, asl
Differential Revision: https://reviews.llvm.org/D27315
llvm-svn: 288433
Rename AllVRegsAllocated to NoVRegs. This avoids the connotation of
running after register and simply describes that no vregs are used in
a machine function. With that we can simply compute the property and do
not need to dump/parse it in .mir files.
Differential Revision: http://reviews.llvm.org/D23850
llvm-svn: 279698
Remove remaining implicit conversions from MachineInstrBundleIterator to
MachineInstr* from the ARM backend. In most cases, I made them less attractive
by preferring MachineInstr& or using a ranged-based for loop.
Once all the backends are fixed I'll make the operator explicit so that this
doesn't bitrot back.
llvm-svn: 274920
Remove the AddPristinesAndCSRs parameters from
addLiveIns()/addLiveOuts().
We need to respect pristine registers after prologue epilogue insertion,
Seeing that we got this wrong in at least two commits already, we should
rather pay the small price to query MachineFrameInfo for it.
There are three cases that did not set AddPristineAndCSRs to true even
after register allocation:
- ExecutionDepsFix: live-out registers are used as a hint that the
register is used soon. This is not true for pristine registers so
use the new addLiveOutsNoPristines() to maintain this behaviour.
- SystemZShortenInst: Not setting AddPristineAndCSRs to true looks like
a bug, should do the right thing automatically now.
- StackMapLivenessAnalysis: Not adding pristine registers looks like a
bug to me. Added a FIXME comment but maintain the current behaviour
as a change may need to get coordinated with GC runtimes.
llvm-svn: 268336
transferSuccessors() would LoadCmpBB a successor of DoneBB, whereas
it should be a successor of the original MBB.
The testcase changes are caused by Thumb2SizeReduction, which
was previously confused by the broken CFG.
Follow-up to r266679.
Unfortunately, it's tricky to catch this in the verifier.
llvm-svn: 267778
The fast register-allocator cannot cope with inter-block dependencies without
spilling. This is fine for ldrex/strex loops coming from atomicrmw instructions
where any value produced within a block is dead by the end, but not for
cmpxchg. So we lower a cmpxchg at -O0 via a pseudo-inst that gets expanded
after regalloc.
Fortunately this is at -O0 so we don't have to care about performance. This
simplifies the various axes of expansion considerably: we assume a strong
seq_cst operation and ensure ordering via the always-present DMB instructions
rather than v8 acquire/release instructions.
Should fix the 32-bit part of PR25526.
llvm-svn: 266679
Summary:
This adds the same checks that were added in r264593 to all
target-specific passes that run after register allocation.
Reviewers: qcolombet
Subscribers: jyknight, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D18525
llvm-svn: 265313
Change TargetInstrInfo API to take `MachineInstr&` instead of
`MachineInstr*` in the functions related to predicated instructions
(I'll try to come back later and get some of the rest). All of these
functions require non-null parameters already, so references are more
clear. As a bonus, this happens to factor away a host of implicit
iterator => pointer conversions.
No functionality change intended.
llvm-svn: 261605
Delete MachineInstr::getIterator(), since the term "iterator" is
overloaded when talking about MachineInstr.
- Downcast to ilist_node in iplist::getNextNode() and getPrevNode() so
that ilist_node::getIterator() is still available.
- Add it back as MachineInstr::getInstrIterator(). This matches the
naming in MachineBasicBlock.
- Add MachineInstr::getBundleIterator(). This is explicitly called
"bundle" (not matching MachineBasicBlock) to disintinguish it clearly
from ilist_node::getIterator().
- Update all calls. Some of these I switched to `auto` to remove
boiler-plate, since the new name is clear about the type.
There was one call I updated that looked fishy, but it wasn't clear what
the right answer was. This was in X86FrameLowering::inlineStackProbe(),
added in r252578 in lib/Target/X86/X86FrameLowering.cpp. I opted to
leave the behaviour unchanged, but I'll reply to the original commit on
the list in a moment.
llvm-svn: 261504
Chandler Carruth