// trunc (binop X, C) --> binop (trunc X, C')
// trunc (binop (ext X), Y) --> binop X, (trunc Y)
I'm grouping sub with the other binops because that makes the code simpler
and the transforms are valid:
https://rise4fun.com/Alive/UeF
...so even though we don't expect a sub with constant Op1 or any of the
other opcodes with constant Op0 due to canonicalization rules, we might as
well handle those situations if non-canonical code somehow reaches this
point (it should just make instcombine more efficient in reaching its
end goal).
This should solve the problem that later manifests in the vectorizers in
PR35295:
https://bugs.llvm.org/show_bug.cgi?id=35295
llvm-svn: 318404
Note that one-use and shouldChangeType() are checked ahead of the switch.
Without the narrowing folds, we can produce inferior vector code as shown in PR35299:
https://bugs.llvm.org/show_bug.cgi?id=35299
llvm-svn: 318323
InstCombine salvages debug info for every instruction it erases from its
worklist, but it wasn't doing it during its initial DCE when populating
its worklist. This fixes that.
This should help improve availability of 'this' in optimized debug info
when casts are necessary.
llvm-svn: 318320
Summary:
This patch optimizes a binop sandwiched between 2 selects with the same condition. Since we know its only used by the select we can propagate the appropriate input value from the earlier select.
As I'm writing this I realize I may need to avoid doing this for division in case the select was protecting a divide by zero?
Reviewers: spatel, majnemer
Reviewed By: majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39999
llvm-svn: 318267
Summary:
This patch adds an early out to visitICmpInst if we are looking at a compare as part of an integer absolute value idiom. Similar is already done for min/max.
In the particular case I observed in a benchmark we had an absolute value of a load from an indexed global. We simplified the compare using foldCmpLoadFromIndexedGlobal into a magic bit vector, a shift, and an and. But the load result was still used for the select and the negate part of the absolute valute idiom. So we overcomplicated the code and lost the ability to recognize it as an absolute value.
I've chosen a simpler case for the test here.
Reviewers: spatel, davide, majnemer
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39766
llvm-svn: 317994
The hexagon test should be fixed now.
Original commit message:
This pulls shifts through a select+binop with a constant where the select conditionally executes the binop. We already do this for just the binop, but not with the select.
This can allow us to get the select closer to other selects to enable removing one.
Differential Revision: https://reviews.llvm.org/D39222
llvm-svn: 317600
This broke the CodeGen/Hexagon/loop-idiom/pmpy-mod.ll test on a bunch of buildbots.
> This pulls shifts through a select+binop with a constant where the select conditionally executes the binop. We already do this for just the binop, but not with the select.
>
> This can allow us to get the select closer to other selects to enable removing one.
>
> Differential Revision: https://reviews.llvm.org/D39222
>
> git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317510 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-svn: 317518
This pulls shifts through a select+binop with a constant where the select conditionally executes the binop. We already do this for just the binop, but not with the select.
This can allow us to get the select closer to other selects to enable removing one.
Differential Revision: https://reviews.llvm.org/D39222
llvm-svn: 317510
As discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-November/107104.html
and again more recently:
http://lists.llvm.org/pipermail/llvm-dev/2017-October/118118.html
...this is a step in cleaning up our fast-math-flags implementation in IR to better match
the capabilities of both clang's user-visible flags and the backend's flags for SDNode.
As proposed in the above threads, we're replacing the 'UnsafeAlgebra' bit (which had the
'umbrella' meaning that all flags are set) with a new bit that only applies to algebraic
reassociation - 'AllowReassoc'.
We're also adding a bit to allow approximations for library functions called 'ApproxFunc'
(this was initially proposed as 'libm' or similar).
...and we're out of bits. 7 bits ought to be enough for anyone, right? :) FWIW, I did
look at getting this out of SubclassOptionalData via SubclassData (spacious 16-bits),
but that's apparently already used for other purposes. Also, I don't think we can just
add a field to FPMathOperator because Operator is not intended to be instantiated.
We'll defer movement of FMF to another day.
We keep the 'fast' keyword. I thought about removing that, but seeing IR like this:
%f.fast = fadd reassoc nnan ninf nsz arcp contract afn float %op1, %op2
...made me think we want to keep the shortcut synonym.
Finally, this change is binary incompatible with existing IR as seen in the
compatibility tests. This statement:
"Newer releases can ignore features from older releases, but they cannot miscompile
them. For example, if nsw is ever replaced with something else, dropping it would be
a valid way to upgrade the IR."
( http://llvm.org/docs/DeveloperPolicy.html#ir-backwards-compatibility )
...provides the flexibility we want to make this change without requiring a new IR
version. Ie, we're not loosening the FP strictness of existing IR. At worst, we will
fail to optimize some previously 'fast' code because it's no longer recognized as
'fast'. This should get fixed as we audit/squash all of the uses of 'isFast()'.
Note: an inter-dependent clang commit to use the new API name should closely follow
commit.
Differential Revision: https://reviews.llvm.org/D39304
llvm-svn: 317488
If a select instruction tests the returned flag of a cmpxchg instruction and
selects between the returned value of the cmpxchg instruction and its compare
operand, the result of the select will always be equal to its false value.
Differential Revision: https://reviews.llvm.org/D39383
llvm-svn: 316994
Summary:
For reference, see: http://lists.llvm.org/pipermail/llvm-dev/2017-August/116589.html
This patch fleshes out the instruction class hierarchy with respect to atomic and
non-atomic memory intrinsics. With this change, the relevant part of the class
hierarchy becomes:
IntrinsicInst
-> MemIntrinsicBase (methods-only class)
-> MemIntrinsic (non-atomic intrinsics)
-> MemSetInst
-> MemTransferInst
-> MemCpyInst
-> MemMoveInst
-> AtomicMemIntrinsic (atomic intrinsics)
-> AtomicMemSetInst
-> AtomicMemTransferInst
-> AtomicMemCpyInst
-> AtomicMemMoveInst
-> AnyMemIntrinsic (both atomicities)
-> AnyMemSetInst
-> AnyMemTransferInst
-> AnyMemCpyInst
-> AnyMemMoveInst
This involves some class renaming:
ElementUnorderedAtomicMemCpyInst -> AtomicMemCpyInst
ElementUnorderedAtomicMemMoveInst -> AtomicMemMoveInst
ElementUnorderedAtomicMemSetInst -> AtomicMemSetInst
A script for doing this renaming in downstream trees is included below.
An example of where the Any* classes should be used in LLVM is when reasoning
about the effects of an instruction (ex: aliasing).
---
Script for renaming AtomicMem* classes:
PREFIXES="[<,([:space:]]"
CLASSES="MemIntrinsic|MemTransferInst|MemSetInst|MemMoveInst|MemCpyInst"
SUFFIXES="[;)>,[:space:]]"
REGEX="(${PREFIXES})ElementUnorderedAtomic(${CLASSES})(${SUFFIXES})"
REGEX2="visitElementUnorderedAtomic(${CLASSES})"
FILES=$( grep -E "(${REGEX}|${REGEX2})" -r . | tr ':' ' ' | awk '{print $1}' | sort | uniq )
SED_SCRIPT="s~${REGEX}~\1Atomic\2\3~g"
SED_SCRIPT2="s~${REGEX2}~visitAtomic\1~g"
for f in $FILES; do
echo "Processing: $f"
sed -i ".bak" -E "${SED_SCRIPT};${SED_SCRIPT2};${EA_SED_SCRIPT};${EA_SED_SCRIPT2}" $f
done
Reviewers: sanjoy, deadalnix, apilipenko, anna, skatkov, mkazantsev
Reviewed By: sanjoy
Subscribers: hfinkel, jholewinski, arsenm, sdardis, nhaehnle, JDevlieghere, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D38419
llvm-svn: 316950
Summary:
Kill the thread if operand 0 == false.
llvm.amdgcn.wqm.vote can be applied to the operand.
Also allow kill in all shader stages.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D38544
llvm-svn: 316427
Summary:
The following transformation for cmp instruction:
icmp smin(x, PositiveValue), 0 -> icmp x, 0
should only be done after checking for min/max to prevent infinite
looping caused by a reverse canonicalization. That is why this
transformation was moved to place after the mentioned check.
Reviewers: spatel, efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38934
Patch by: Artur Gainullin <artur.gainullin@intel.com>
llvm-svn: 315895
Eliminate inttype phi with inttoptr/ptrtoint.
This version fixed a bug in finding the matching
phi -- the order of the incoming blocks may be
different (triggered in self build on Windows).
A new test case is added.
llvm-svn: 315272
There's at least one bug here - this code can fail with vector types (PR34856).
It's also being called for FREM; I'm still trying to understand how that is valid.
llvm-svn: 315127
This appears to be miscompiling Clang, as shown on two Windows bootstrap
bots:
http://lab.llvm.org:8011/builders/clang-x86-windows-msvc2015/builds/7611http://lab.llvm.org:8011/builders/clang-x64-ninja-win7/builds/6870
Nothing else is in the blame list. Both emit errors on this valid code
in the Windows ucrt headers:
C:\...\ucrt\malloc.h:95:32: error: invalid operands to binary expression ('char *' and 'int')
_Ptr = (char*)_Ptr + _ALLOCA_S_MARKER_SIZE;
~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~
I am attempting to reproduce this now.
This reverts r315044
llvm-svn: 315108
We were using an i1 type and then zero extending to a vector. Instead just create the 0/1 directly as a ConstantInt with the correct type. No need to ask ConstantExpr to zero extend for us.
This bug is a bit tricky to hit because it requires us to visit a zext of an icmp that would normally be simplified to true/false, but that icmp hasnt' been visited yet. In the test case this zext and icmp were created by visiting a udiv and due to worklist ordering we got to the zext first.
Fixes PR34841.
llvm-svn: 314971
We can support ashr similar to lshr, if we know that none of the shifted in bits are used. In that case SimplifyDemandedBits would normally convert it to lshr. But that conversion doesn't happen if the shift has additional users.
Differential Revision: https://reviews.llvm.org/D38521
llvm-svn: 314945
Apparently this works by virtue of the fact that the pointers are pointers to the APInts stored inside of the ConstantInt objects. But I really don't think we should be relying on that.
llvm-svn: 314761
Summary: If the merged instruction is call instruction, we need to set the scope to the closes common scope between 2 locations, otherwise it will cause trouble when the call is getting inlined.
Reviewers: dblaikie, aprantl
Reviewed By: dblaikie, aprantl
Subscribers: llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D37877
llvm-svn: 314694
Summary: This currently uses ConstantExpr to do its math, but as noted in a TODO it can all be done directly on APInt.
Reviewers: spatel, majnemer
Reviewed By: majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38440
llvm-svn: 314640
And follow-up r314585.
Leads to segfaults. I'll forward reproduction instructions to the patch
author.
Also, for a recommit, still add the original patch description.
Otherwise, it becomes really tedious to find out what a patch actually
does. The fact that it is a recommit with a fix is somewhat secondary.
llvm-svn: 314622
This patch will eliminate redundant intptr/ptrtoint that pessimizes
analyses such as SCEV, AA and will make optimization passes such
as auto-vectorization more powerful.
Differential revision: http://reviews.llvm.org/D37832
llvm-svn: 314561
This reverts r314017 and similar code added in later commits. It seems to not work for pointer compares and is causing a bot failure for the last several days.
llvm-svn: 314360
These changes faciliate positive behavior for arithmetic based select
expressions that match its translation criteria, keeping code size gated to
neutral or improved scenarios.
Patch by Michael Berg <michael_c_berg@apple.com>!
Differential Revision: https://reviews.llvm.org/D38263
llvm-svn: 314320
If this transformation succeeds, we're going to remove our dependency on the shift by rewriting the and. So it doesn't matter how many uses the shift has.
This distributes the one use check to other transforms in foldICmpAndConstConst that do need it.
Differential Revision: https://reviews.llvm.org/D38206
llvm-svn: 314233
All this optimization cares about is knowing how many low bits of LHS is known to be zero and whether that means that the result is 0 or greater than the RHS constant. It doesn't matter where the zeros in the low bits came from. So we don't need to specifically look for an AND. Instead we can use known bits.
Differential Revision: https://reviews.llvm.org/D38195
llvm-svn: 314153
The 1st attempt at this:
https://reviews.llvm.org/rL314117
was reverted at:
https://reviews.llvm.org/rL314118
because of bot fails for clang tests that were checking optimized IR. That should be fixed with:
https://reviews.llvm.org/rL314144
...so try again.
Original commit message:
The transform to convert an extract-of-a-select-of-vectors was added at:
https://reviews.llvm.org/rL194013
And a question about the validity of this transform was raised in the review:
https://reviews.llvm.org/D1539:
...but not answered AFAICT>
Most of the motivating cases in that patch are now handled by other combines. These are the tests that were added with
the original commit, but they are not regressing even after we remove the transform in this patch.
The diffs we see after removing this transform cause us to avoid increasing the instruction count, so we don't want to do
those transforms as canonicalizations.
The motivation for not turning a vector-select-of-vectors into a scalar operation is shown in PR33301:
https://bugs.llvm.org/show_bug.cgi?id=33301
...in those cases, we'll get vector ops with this patch rather than the vector/scalar mix that we currently see.
Differential Revision: https://reviews.llvm.org/D38006
llvm-svn: 314147
The transform to convert an extract-of-a-select-of-vectors was added at:
rL194013
And a question about the validity of this transform was raised in the review:
https://reviews.llvm.org/D1539:
...but not answered AFAICT>
Most of the motivating cases in that patch are now handled by other combines. These are the tests that were added with
the original commit, but they are not regressing even after we remove the transform in this patch.
The diffs we see after removing this transform cause us to avoid increasing the instruction count, so we don't want to do
those transforms as canonicalizations.
The motivation for not turning a vector-select-of-vectors into a scalar operation is shown in PR33301:
https://bugs.llvm.org/show_bug.cgi?id=33301
...in those cases, we'll get vector ops with this patch rather than the vector/scalar mix that we currently see.
Differential Revision: https://reviews.llvm.org/D38006
llvm-svn: 314117
The result of the isSignBitCheck isn't used anywhere else and this allows us to share the m_APInt call in the likely case that it isn't a sign bit check.
llvm-svn: 314018
The fix is to avoid invalidating our insertion point in
replaceDbgDeclare:
Builder.insertDeclare(NewAddress, DIVar, DIExpr, Loc, InsertBefore);
+ if (DII == InsertBefore)
+ InsertBefore = &*std::next(InsertBefore->getIterator());
DII->eraseFromParent();
I had to write a unit tests for this instead of a lit test because the
use list order matters in order to trigger the bug.
The reduced C test case for this was:
void useit(int*);
static inline void inlineme() {
int x[2];
useit(x);
}
void f() {
inlineme();
inlineme();
}
llvm-svn: 313905
.. as well as the two subsequent changes r313826 and r313875.
This leads to segfaults in combination with ASAN. Will forward repro
instructions to the original author (rnk).
llvm-svn: 313876
Summary:
This implements the design discussed on llvm-dev for better tracking of
variables that live in memory through optimizations:
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117222.html
This is tracked as PR34136
llvm.dbg.addr is intended to be produced and used in almost precisely
the same way as llvm.dbg.declare is today, with the exception that it is
control-dependent. That means that dbg.addr should always have a
position in the instruction stream, and it will allow passes that
optimize memory operations on local variables to insert llvm.dbg.value
calls to reflect deleted stores. See SourceLevelDebugging.rst for more
details.
The main drawback to generating DBG_VALUE machine instrs is that they
usually cause LLVM to emit a location list for DW_AT_location. The next
step will be to teach DwarfDebug.cpp how to recognize more DBG_VALUE
ranges as not needing a location list, and possibly start setting
DW_AT_start_offset for variables whose lifetimes begin mid-scope.
Reviewers: aprantl, dblaikie, probinson
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37768
llvm-svn: 313825
We already did (X & C2) > C1 --> (X & C2) != 0, if any bit set in (X & C2) will produce a result greater than C1. But there is an equivalent inverse condition with <= C1 (which will be canonicalized to < C1+1)
Differential Revision: https://reviews.llvm.org/D38065
llvm-svn: 313819
In these cases, two selects have constant selectable operands for
both the true and false components and have the same conditional
expression.
We then create two arithmetic operations of the same type and feed a
final select operation using the result of the true arithmetic for the true
operand and the result of the false arithmetic for the false operand and reuse
the original conditionl expression.
The arithmetic operations are naturally folded as a consequence, leaving
only the newly formed select to replace the old arithmetic operation.
Patch by: Michael Berg <michael_c_berg@apple.com>
Differential Revision: https://reviews.llvm.org/D37019
llvm-svn: 313774
I've moved the test cases from the InstCombine optimizations to the backend to keep the coverage we had there. It covered every possible immediate so I've preserved the resulting shuffle mask for each of those immediates.
llvm-svn: 313450
Summary:
This should improve optimized debug info for address-taken variables at
the cost of inaccurate debug info in some situations.
We patched this into clang and deployed this change to Chromium
developers, and this significantly improved debuggability of optimized
code. The long-term solution to PR34136 seems more and more like it's
going to take a while, so I would like to commit this change under a
flag so that it can be used as a stop-gap measure.
This flag should really help so for C++ aggregates like std::string and
std::vector, which are typically address-taken, even after inlining, and
cannot be SROA-ed.
Reviewers: aprantl, dblaikie, probinson, dberlin
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D36596
llvm-svn: 313108
It now knows the tricks of both functions.
Also, fix a bug that considered allocas of non-zero address space to be always non null
Differential Revision: https://reviews.llvm.org/D37628
llvm-svn: 312869
This is a preliminary step towards solving the remaining part of PR27145 - IR for isfinite():
https://bugs.llvm.org/show_bug.cgi?id=27145
In order to solve that one more generally, we need to add matching for and/or of fcmp ord/uno
with a constant operand.
But while looking at those patterns, I realized we were missing a canonicalization for nonzero
constants. Rather than limiting to just folds for constants, we're adding a general value
tracking method for this based on an existing DAG helper.
By transforming everything to 0.0, we can simplify the existing code in foldLogicOfFCmps()
and pick up missing vector folds.
Differential Revision: https://reviews.llvm.org/D37427
llvm-svn: 312591
Instead of creating a Constant and then calling m_APInt with it (which will always return true). Just create an APInt initially, and use that for the checks in isSelect01 function. If it turns out we do need the Constant, create it from the APInt.
This is a refactor for a future patch that will do some more checks of the constant values here.
llvm-svn: 312517
In addition to removing chunks of duplicated code, we don't
want these to diverge. If there's a fold for one, there
should be a fold of the other via DeMorgan's Laws.
llvm-svn: 312420
We had these locals:
Value *Op0RHS = LHS->getOperand(1);
Value *Op1LHS = RHS->getOperand(0);
...so we confusingly transposed the meaning of left/right and op0/op1.
llvm-svn: 312418
This makes it easier to see that they're almost duplicates.
As with the similar icmp functions, there should be identical
folds for both logic ops because those are DeMorganized variants.
llvm-svn: 312415
This patch teaches decomposeBitTestICmp to look through truncate instructions on the input to the compare. If a truncate is found it will now return the pre-truncated Value and appropriately extend the APInt mask.
This allows some code to be removed from InstSimplify that was doing this functionality.
This allows InstCombine's bit test combining code to match a pre-truncate Value with the same Value appear with an 'and' on another icmp. Or it allows us to combine a truncate to i16 and a truncate to i8. This also required removing the type check from the beginning of getMaskedTypeForICmpPair, but I believe that's ok because we still have to find two values from the input to each icmp that are equal before we'll do any transformation. So the type check was really just serving as an early out.
There was one user of decomposeBitTestICmp that didn't want to look through truncates, so I've added a flag to prevent that behavior when necessary.
Differential Revision: https://reviews.llvm.org/D37158
llvm-svn: 312382
A future patch will make the code look through truncates feeding the compare. So the compares might be different types but the pretruncated types might be the same.
This should be safe because we still require the same Value* to be used truncated or not in both compares. So that serves to ensure the types are the same.
llvm-svn: 312381
Previously we used the type from the LHS of the compare, but a future patch will change decomposeBitTestICmp to look through truncates so it will return a pretruncated Value* and the type needs to match that.
llvm-svn: 312380
Recurse instead of returning on the first found optimization. Also, return early in the caller
instead of continuing because that allows another round of simplification before we might
potentially lose undef information from a shuffle mask by eliminating the shuffle.
As noted in the review, we could probably do better and be more efficient by moving all of
demanded elements into a separate pass, but this is yet another quick fix to instcombine.
Differential Revision: https://reviews.llvm.org/D37236
llvm-svn: 312248
This code is double-dead:
1. We simplify all selects with constant true/false condition in InstSimplify.
I've minimized/moved the tests to show that works as expected.
2. All remaining vector selects with a constant condition are canonicalized to
shufflevector, so we really can't see this pattern.
llvm-svn: 312123
Summary:
If the first insertelement instruction has multiple users and inserts at
position 0, we can re-use this instruction when folding a chain of
insertelement instructions. As we need to generate the first
insertelement instruction anyways, this should be a strict improvement.
We could get rid of the restriction of inserting at position 0 by
creating a different shufflemask, but it is probably worth to keep the
first insertelement instruction with position 0, as this is easier to do
efficiently than at other positions I think.
Reviewers: grosser, mkuper, fpetrogalli, efriedma
Reviewed By: fpetrogalli
Subscribers: gareevroman, llvm-commits
Differential Revision: https://reviews.llvm.org/D37064
llvm-svn: 312110
This patch adds splat support to transformZExtICmp. The test cases are vector versions of tests that failed when commenting out parts of the existing scalar code.
One test didn't vectorize optimize properly due to another bug so a TODO has been added.
Differential Revision: https://reviews.llvm.org/D37253
llvm-svn: 312023
This was pretty close to working already. While I was here I went ahead and passed the ICmpInst pointer from the caller instead of doing a dyn_cast that can never fail.
Differential Revision: https://reviews.llvm.org/D37237
llvm-svn: 311960
We were handling some vectors in foldSelectIntoOp, but not if the operand of the bin op was any kind of vector constant. This patch fixes it to treat vector splats the same as scalars.
Differential Revision: https://reviews.llvm.org/D37232
llvm-svn: 311940
Just create an all 1s demanded mask and continue recursing like normal. The recursive calls should be able to handle an all 1s mask and do the right thing.
The only time we should care about knowing whether the upper bit was demanded is when we need to know if we should clear the NSW/NUW flags.
Now that we have a consistent path through the code for all cases, use KnownBits::computeForAddSub to compute the known bits at the end since we already have the LHS and RHS.
My larger goal here is to move the code that turns add into xor if only 1 bit is demanded and no bits below it are non-zero from InstCombiner::OptAndOp to here. This will allow it to be more general instead of just looking for 'add' and 'and' with constant RHS.
Differential Revision: https://reviews.llvm.org/D36486
llvm-svn: 311789
There are cases where AShr have better chance to be optimized than LShr, especially when the demanded bits are not known to be Zero, and also known to be similar to the sign bit.
Differential Revision: https://reviews.llvm.org/D36936
llvm-svn: 311773
There are 3 small independent changes here:
1. Account for multiple uses in the pattern matching: avoid the transform if it increases the instruction count.
2. Add a missing fold for the case where the numerator is the constant: http://rise4fun.com/Alive/E2p
3. Enable all folds for vector types.
There's still one more potential change - use "shouldChangeType()" to keep from transforming to an illegal integer type.
Differential Revision: https://reviews.llvm.org/D36988
llvm-svn: 311726
InstCombine folds instructions with irrelevant conditions to undef.
This, as Nuno confirmed is a bug.
(see https://bugs.llvm.org/show_bug.cgi?id=33409#c1 )
Given the original motivation for the change is that of removing an
USE, we now fold to false instead (which reaches the same goal
without undesired side effects).
Fixes PR33409.
Differential Revision: https://reviews.llvm.org/D36975
llvm-svn: 311540
Looks like for 'and' and 'or' we end up performing at least some of the transformations this is bocking in a round about way anyway.
For 'and sext(cmp1), sext(cmp2) we end up later turning it into 'select cmp1, sext(cmp2), 0'. Then we optimize that back to sext (and cmp1, cmp2). This is the same result we would have gotten if shouldOptimizeCast hadn't blocked it. We do something analogous for 'or'.
With this patch we allow that transformation to happen directly in foldCastedBitwiseLogic. And we now support the same thing for 'xor'. This is definitely opening up many other cases, but since we already went around it for some cases hopefully it's ok.
Differential Revision: https://reviews.llvm.org/D36213
llvm-svn: 311508
I don't think there's any reason to have them scattered about and on all 4 operands. We already have an early check that both compares must be the same type. And within a given compare the LHS and RHS must have the same type. Beyond that I don't think there's anyway this function returns anything valid for pointer types. So let's just return early and be done with it.
Differential Revision: https://reviews.llvm.org/D36561
llvm-svn: 311383
This is similar to what was already done in foldSelectICmpAndOr. Ultimately I'd like to see if we can call foldSelectICmpAnd from foldSelectIntoOp if we detect a power of 2 constant. This would allow us to remove foldSelectICmpAndOr entirely.
Differential Revision: https://reviews.llvm.org/D36498
llvm-svn: 311362
Summary:
If the bitsToClear from the LHS of an 'and' comes back non-zero, but all of those bits are known zero on the RHS, we can reset bitsToClear.
Without this, the 'or' in the modified test case blocks the transform because it has non-zero bits in its RHS in those bits.
Reviewers: spatel, majnemer, davide
Reviewed By: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36944
llvm-svn: 311343
We were only allowing ConstantInt before. This patch allows splat of ConstantInt too.
Differential Revision: https://reviews.llvm.org/D36763
llvm-svn: 310970
Narrow ops are better for bit-tracking, and in the case of vectors,
may enable better codegen.
As the trunc test shows, this can allow follow-on simplifications.
There's a block of code in visitTrunc that deals with shifted ops
with FIXME comments. It may be possible to remove some of that now,
but I want to make sure there are no problems with this step first.
http://rise4fun.com/Alive/Y3a
Name: hoist_ashr_ahead_of_sext_1
%s = sext i8 %x to i32
%r = ashr i32 %s, 3 ; shift value is < than source bit width
=>
%a = ashr i8 %x, 3
%r = sext i8 %a to i32
Name: hoist_ashr_ahead_of_sext_2
%s = sext i8 %x to i32
%r = ashr i32 %s, 8 ; shift value is >= than source bit width
=>
%a = ashr i8 %x, 7 ; so clamp this shift value
%r = sext i8 %a to i32
Name: junc_the_trunc
%a = sext i16 %v to i32
%s = ashr i32 %a, 18
%t = trunc i32 %s to i16
=>
%t = ashr i16 %v, 15
llvm-svn: 310942
This recommits r310869, with the moved files and no extra changes.
Original commit message:
This addresses a fixme in InstSimplify about using decomposeBitTest. This also fixes InstSimplify to handle ugt and ult compares too.
I've modified the interface a little to return only the APInt version of the mask that InstSimplify needs. InstCombine now has a small wrapper routine to create a Constant out of it. I've also dropped the returning of 0 since InstSimplify doesn't need that. So InstCombine creates a zero constant itself.
I also had to make decomposeBitTest support vectors since InstSimplify needs that.
As InstSimplify can't use something from the Transforms library, I've moved the CmpInstAnalysis code to the Analysis library.
Differential Revision: https://reviews.llvm.org/D36593
llvm-svn: 310889
Failed to add the two files that moved. And then added an extra change I didn't mean to while trying to fix that. Reverting everything.
llvm-svn: 310873
This addresses a fixme in InstSimplify about using decomposeBitTest. This also fixes InstSimplify to handle ugt and ult compares too.
I've modified the interface a little to return only the APInt version of the mask that InstSimplify needs. InstCombine now has a small wrapper routine to create a Constant out of it. I've also dropped the returning of 0 since InstSimplify doesn't need that. So InstCombine creates a zero constant itself.
I also had to make decomposeBitTest support vectors since InstSimplify needs that.
As InstSimplify can't use something from the Transforms library, I've moved the CmpInstAnalysis code to the Analysis library.
Differential Revision: https://reviews.llvm.org/D36593
llvm-svn: 310869
Summary:
These functions were overly complicated. The body of this function was rechecking for an And operation to find the constant, but we already knew we were looking at two Ands ORed together and the pieces are in variables. We already had earlier nearby code that checked for ConstantInts. So just inline the remaining parts into the earlier code.
Next step is to use m_APInt instead of ConstantInt.
Reviewers: spatel, efriedma, davide, majnemer
Reviewed By: spatel
Subscribers: zzheng, llvm-commits
Differential Revision: https://reviews.llvm.org/D36439
llvm-svn: 310806
This also corrects the description to match what was actually implemented. The old comment said X^(C1|C2), but it implemented X^((C1|C2)&~(C1&C2)). I believe ((C1|C2)&~(C1&C2)) is equivalent to (C1^C2).
Differential Revision: https://reviews.llvm.org/D36505
llvm-svn: 310658
We used to try to truncate the constant vector to vXi1, but if it's already i1 this would fail. Instead we now use IRBuilder::getZExtOrTrunc which should check the type and only create a trunc if needed. I believe this should trigger constant folding in the IRBuilder and ultimately do the same thing just with the additional type check.
llvm-svn: 310639
Sometimes it would be nice to stop InstCombine mid way through its combining to see the current IR. By using a debug counter we can place an upper limit on how many instructions to process.
This will also allow skipping the first X combines, but that has the potential to change later combines since earlier canonicalizations might have been skipped.
Differential Revision: https://reviews.llvm.org/D36553
llvm-svn: 310638
I couldn't find any smaller folds to help the cases in:
https://bugs.llvm.org/show_bug.cgi?id=34046
after:
rL310141
The truncated rotate-by-variable patterns elude all of the existing transforms because
of multiple uses and knowledge about demanded bits and knownbits that doesn't exist
without the whole pattern. So we need an unfortunately large pattern match. But by
simplifying this pattern in IR, the backend is already able to generate
rolb/rolw/rorb/rorw for x86 using its existing rotate matching logic (although
there is a likely extraneous 'and' of the rotate amount).
Note that rotate-by-constant doesn't have this problem - smaller folds should already
produce the narrow IR ops.
Differential Revision: https://reviews.llvm.org/D36395
llvm-svn: 310509
We already support pulling through an add with constant RHS. We can do the same for subtract.
Differential Revision: https://reviews.llvm.org/D36443
llvm-svn: 310407
Note the original code I deleted incorrectly listed this as (X | C1) & C2 --> (X & C2^(C1&C2)) | C1 Which is only valid if C1 is a subset of C2. This relied on SimplifyDemandedBits to remove any extra bits from C1 before we got to that code.
My new implementation avoids relying on that behavior so that it can be naively verified with alive.
Differential Revision: https://reviews.llvm.org/D36384
llvm-svn: 310272
Unfortunately, it looks like there's some other missed optimizations in the generated code for some of these cases. I'll try to look at some of those next.
llvm-svn: 310184
Previously we were always trying to emit the zext or truncate before any shift. This meant if the 'and' mask was larger than the size of the truncate we would skip the transformation.
Now we shift the result of the and right first leaving the bit within the range of the truncate.
This matches what we are doing in foldSelectICmpAndOr for the same problem.
llvm-svn: 310159
Summary:
The (not (sext)) case is really (xor (sext), -1) which should have been simplified to (sext (xor, 1)) before we got here. So we shouldn't need to handle it.
With that taken care of we only need to two cases so don't need the swap anymore. This makes us in sync with the equivalent code in visitOr so inline this to match.
Reviewers: spatel, eli.friedman, majnemer
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36240
llvm-svn: 310063
Name: narrow_shift
Pre: C1 < 8
%zx = zext i8 %x to i32
%l = lshr i32 %zx, C1
=>
%narrowC = trunc i32 C1 to i8
%ns = lshr i8 %x, %narrowC
%l = zext i8 %ns to i32
http://rise4fun.com/Alive/jIV
This isn't directly applicable to PR34046 as written, but we
need to have more narrowing folds like this to be sure that
rotate patterns are recognized.
llvm-svn: 310060
Summary:
This commit allows matchSelectPattern to recognize clamp of float
arguments in the presence of FMF the same way as already done for
integers.
This case is a little different though. With integers, given the
min/max pattern is recognized, DAGBuilder starts selecting MIN/MAX
"automatically". That is not the case for float, because for them only
full FMINNAN/FMINNUM/FMAXNAN/FMAXNUM ISD nodes exist and they do care
about NaNs. On the other hand, some backends (e.g. X86) have only
FMIN/FMAX nodes that do not care about NaNS and the former NAN/NUM
nodes are illegal thus selection is not happening. So I decided to do
such kind of transformation in IR (InstCombiner) instead of
complicating the logic in the backend.
Reviewers: spatel, jmolloy, majnemer, efriedma, craig.topper
Reviewed By: efriedma
Subscribers: hiraditya, javed.absar, n.bozhenov, llvm-commits
Patch by Andrei Elovikov <andrei.elovikov@intel.com>
Differential Revision: https://reviews.llvm.org/D33186
llvm-svn: 310054
As far as I can tell this should be handled by foldCastedBitwiseLogic which is called later in visitXor.
Differential Revision: https://reviews.llvm.org/D36214
llvm-svn: 309882
This adds support for sext in foldLogicCastConstant. This is a prerequisite for D36214.
Differential Revision: https://reviews.llvm.org/D36234
llvm-svn: 309880
Summary:
As far as I can tell the earlier call getLimitedValue will guaranteed ShiftAmt is saturated to BitWidth-1 preventing it from ever being equal or greater than BitWidth.
At one point in the past the getLimitedValue call was only passed BitWidth not BitWidth - 1. This would have allowed the equality case to get here. And in fact this check was initially added as just BitWidth == ShiftAmt, but was changed shortly after to include > which should have never been possible.
Reviewers: spatel, majnemer, davide
Reviewed By: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36123
llvm-svn: 309690
This intrinsic clears the upper bits starting at a specified index. If the index is a constant we can do some simplifications.
This could be in InstSimplify, but we don't handle any target specific intrinsics there today.
Differential Revision: https://reviews.llvm.org/D36069
llvm-svn: 309604
This patch adds simplification support for the BEXTR/BEXTRI intrinsics to match gcc. This only supports cases that fold to 0 or can be fully constant folded. Theoretically we could support converting to AND if the shift part is unused or to only a shift if the mask doesn't modify any bits after an equivalent shl. gcc doesn't do these transformations either.
I put this in InstCombine, but it could be done in InstSimplify. It would be the first target specific intrinsic in InstSimplify.
Differential Revision: https://reviews.llvm.org/D36063
llvm-svn: 309603
Summary:
Pointer difference simplifications currently happen only if input GEPs don't have other uses or their indexes are all constants, to avoid duplicating indexing arithmetic.
This patch enables cases with exactly one non-constant index among input GEPs to happen where there is no duplicated arithmetic or code size increase even if input GEPs have other uses.
For example, this patch allows "(&A[42][i]-&A[42][0])" --> "i", which didn't happen previously, if the input GEP(s) have other uses.
Reviewers: sanjoy, bkramer
Reviewed By: sanjoy
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D35499
llvm-svn: 309304
Summary:
This changes SimplifyLibCalls to use the new OptimizationRemarkEmitter
API.
In fact, as SimplifyLibCalls is only ever called via InstCombine,
(as far as I can tell) the OptimizationRemarkEmitter is added there,
and then passed through to SimplifyLibCalls later.
I have avoided changing any remark text.
This closes PR33787
Patch by Sam Elliott!
Reviewers: anemet, davide
Reviewed By: anemet
Subscribers: davide, mehdi_amini, eraman, fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D35608
llvm-svn: 309158
This is a workaround for the bug described in PR31652 and
http://lists.llvm.org/pipermail/llvm-dev/2017-July/115497.html. The temporary
solution is to add a function EqualityPropUnSafe. In EqualityPropUnSafe, for
some simple patterns we can know the equality comparison may contains undef,
so we regard such comparison as unsafe and will not do loop-unswitching for
them. We also need to disable the select simplification when one of select
operand is undef and its result feeds into equality comparison.
The patch cannot clear the safety issue caused by the bug, but it can suppress
the issue from happening to some extent.
Differential Revision: https://reviews.llvm.org/D35811
llvm-svn: 309059
Summary: Currently, when GVN creates a load and when InstCombine creates a new store for unreachable Load, the DebugLoc info gets lost.
Reviewers: dberlin, davide, aprantl
Reviewed By: aprantl
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D34639
llvm-svn: 308404
Summary:
If one side simplifies to the identity value for inner opcode, we can replace the value with just the operation that can't be simplified.
I've removed a couple now unneeded special cases in visitAnd and visitOr. There are probably other cases I missed.
Reviewers: spatel, majnemer, hfinkel, dberlin
Reviewed By: spatel
Subscribers: grandinj, llvm-commits, spatel
Differential Revision: https://reviews.llvm.org/D35451
llvm-svn: 308111
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
I recently changed m_One and m_AllOnes to use Constant::isOneValue/isAllOnesValue which work on floating point values too. The original implementation looked specifically for ConstantInt scalars and splats. So I'm guessing we are accidentally trying to issue sext/zexts on floating point types now.
Hopefully I figure out how to reproduce the failure from the PR soon.
llvm-svn: 307486
Previously the InstCombiner class contained a pointer to an IR builder that had been passed to the constructor. Sometimes this would be passed to helper functions as either a pointer or the pointer would be dereferenced to be passed by reference.
This patch makes it a reference everywhere including the InstCombiner class itself so there is more inconsistency. This a large, but mechanical patch. I've done very minimal formatting changes on it despite what clang-format wanted to do.
llvm-svn: 307451
Going through the Constant methods requires redetermining that the Constant is a ConstantInt and then calling isZero/isOne/isMinusOne.
llvm-svn: 307292
Bswap isn't a simple operation so we need to make sure we are really removing a call to it before doing these simplifications.
For the case when both LHS and RHS are bswaps I've allowed it to be moved if either LHS or RHS has a single use since that at least allows us to move it later where it might find another bswap to combine with and it decreases the use count on the other side so maybe the other user can be optimized.
Differential Revision: https://reviews.llvm.org/D34974
llvm-svn: 307273
We assumed the constant was a scalar when creating the replacement operand.
Also, improve tests for this fold and move the tests for this fold to their own file.
I'll move the related and missing tests to this file as a follow-up.
llvm-svn: 306985
I noticed this missed bswap optimization in the CGP memcmp() expansion,
and then I saw that we don't have the fold in InstCombine.
Differential Revision: https://reviews.llvm.org/D34763
llvm-svn: 306980
Summary:
I came across this while thinking about what would happen if one of the operands in this xor pattern was itself a inverted (A & ~B) ^ (~A & B)-> (A^B).
The patterns here assume that the (~a | ~b) will be demorganed to ~(a & b) first. Though I wonder if there's a multiple use case that would prevent the demorgan.
Reviewers: spatel
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34870
llvm-svn: 306967
We aren't looking through any levels of IR here so I don't think we need the power of a matcher or the temporary variable it requires.
llvm-svn: 306885
There are two conditions ORed here with similar checks and each contain two matches that must be true for the if to succeed. With the commutable match on the first half of the OR then both ifs basically have the same first part and only the second part distinguishs. With this change we move the commutable match to second half and make the first half unique.
This caused some tests to change because we now produce a commuted result, but this shouldn't matter in practice.
llvm-svn: 306800
Summary:
As discussed on the mailing list it is legal to propagate TBAA to loads/stores
from/to smaller regions of a larger load tagged with TBAA. Do so for
(load->extractvalue)=>(gep->load) and similar foldings.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D31954
llvm-svn: 306615
Summary:
This commit allows matchSelectPattern to recognize clamp of float
arguments in the presence of FMF the same way as already done for
integers.
This case is a little different though. With integers, given the
min/max pattern is recognized, DAGBuilder starts selecting MIN/MAX
"automatically". That is not the case for float, because for them only
full FMINNAN/FMINNUM/FMAXNAN/FMAXNUM ISD nodes exist and they do care
about NaNs. On the other hand, some backends (e.g. X86) have only
FMIN/FMAX nodes that do not care about NaNS and the former NAN/NUM
nodes are illegal thus selection is not happening. So I decided to do
such kind of transformation in IR (InstCombiner) instead of
complicating the logic in the backend.
Reviewers: spatel, jmolloy, majnemer, efriedma, craig.topper
Reviewed By: efriedma
Subscribers: hiraditya, javed.absar, n.bozhenov, llvm-commits
Patch by Andrei Elovikov <andrei.elovikov@intel.com>
Differential Revision: https://reviews.llvm.org/D33186
llvm-svn: 306525
Sanjay Patel