There's quite a lot of references to Polly in the LLVM CMake codebase. However
the registration pattern used by Polly could be useful to other external
projects: thanks to that mechanism it would be possible to develop LLVM
extension without touching the LLVM code base.
This patch has two effects:
1. Remove all code specific to Polly in the llvm/clang codebase, replaicing it
with a generic mechanism
2. Provide a generic mechanism to register compiler extensions.
A compiler extension is similar to a pass plugin, with the notable difference
that the compiler extension can be configured to be built dynamically (like
plugins) or statically (like regular passes).
As a result, people willing to add extra passes to clang/opt can do it using a
separate code repo, but still have their pass be linked in clang/opt as built-in
passes.
Differential Revision: https://reviews.llvm.org/D61446
Summary:
As of rL329273, LLVM has a mechanism to load new-pm plugins in opt. Use
this API in Polly.
Reviewers: grosser, Meinersbur, bollu
Reviewed By: grosser, Meinersbur
Subscribers: lksbhm, bollu, pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D45484
llvm-svn: 330181
In r301670 IR verification was disabled. Since then, CodeGen writing
malformed IR would only be noticed by unpredictable behavior in
follow-up passes (e.g. segfaults, infinite loops) or IR verification in
the backend assert builds.
Re-enable -polly-codegen-verify at for the regression tests to ensure
that malformed IR is detected where Polly generated malformed IR in the
past and changes in CodeGen are at least partially covered by
check-polly
(otherwise malformed IR may only get noticed when the buildbots run the
test-suite).
Differential Revision: https://reviews.llvm.org/D37969
llvm-svn: 313527
Summary:
This allows us to map functions such as exp, expf, expl, for which no
LLVM intrinsics exist. Instead, we link to NVIDIA's libdevice which provides
high-performance implementations of a wide range of (math) functions. We
currently link only a small subset, the exp, cos and copysign functions. Other
functions will be enabled as needed.
Reviewers: bollu, singam-sanjay
Reviewed By: bollu
Subscribers: tstellar, tra, nemanjai, pollydev, mgorny, llvm-commits, kbarton
Tags: #polly
Differential Revision: https://reviews.llvm.org/D35703
llvm-svn: 309560
Summary:
As of now, Polly uses llvm-config to set up LLVM dependencies in an out-of-tree build.
This is problematic for two reasons:
1) Right now, in-tree and out-of-tree builds in fact do different things. E.g., in an in-tree build, libPolly depends on a handful of LLVM libraries, while in an out-of-tree build it depends on all of them. This means that we often need to treat both paths seperately.
2) I'm specifically unhappy with the way libPolly is linked right now, because it just blindly links against all the LLVM libs. That doesn't make a lot of sense. For instance, one of these libs is LLVMTableGen, which contains a command line definition of a -o option. This means that I can not link an out-of-tree libPolly into a tool which might want to offer a -o option as well.
This patch (mostly) drop the use of llvm-config in favor of LLVMs exported cmake package. However, building Polly with unittests requires access to the gtest sources (in the LLVM source tree). If we're building against an LLVM installation, this source tree is unavailable and must specified. I'm using llvm-config to provide a default in this case.
Reviewers: Meinersbur, grosser
Reviewed By: grosser
Subscribers: tstellar, bollu, chapuni, mgorny, pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D33299
llvm-svn: 307650
For the previous commit I accidentally added this change to lit.site.cfg, which
is autogenerated and was consequently not part of the previous commit.
llvm-svn: 307648
LLVM-IR names are commonly available in debug builds, but often not in release
builds. Hence, using LLVM-IR names to identify statements or memory reference
results makes the behavior of Polly depend on the compile mode. This is
undesirable. Hence, we now just number the statements instead of using LLVM-IR
names to identify them (this issue has previously been brought up by Zino
Benaissa).
However, as LLVM-IR names help in making test cases more readable, we add an
option '-polly-use-llvm-names' to still use LLVM-IR names. This flag is by
default set in the polly tests to make test cases more readable.
This change reduces the time in ScopInfo from 32 seconds to 2 seconds for the
following test case provided by Eli Friedman <efriedma@codeaurora.org> (already
used in one of the previous commits):
struct X { int x; };
void a();
#define SIG (int x, X **y, X **z)
typedef void (*fn)SIG;
#define FN { for (int i = 0; i < x; ++i) { (*y)[i].x += (*z)[i].x; } a(); }
#define FN5 FN FN FN FN FN
#define FN25 FN5 FN5 FN5 FN5
#define FN125 FN25 FN25 FN25 FN25 FN25
#define FN250 FN125 FN125
#define FN1250 FN250 FN250 FN250 FN250 FN250
void x SIG { FN1250 }
For a larger benchmark I have on-hand (10000 loops), this reduces the time for
running -polly-scops from 5 minutes to 4 minutes, a reduction by 20%.
The reason for this large speedup is that our previous use of printAsOperand
had a quadratic cost, as for each printed and unnamed operand the full function
was scanned to find the instruction number that identifies the operand.
We do not need to adjust the way memory reference ids are constructured, as
they do not use LLVM values.
Reviewed by: efriedma
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32789
llvm-svn: 302072
Some Polly ACC test cases fail without a working NVPTX backend. We explicitly
specify this dependence in REQUIRES. Alternatively, we could have only marked
polly-acc as supported in case the NVPTX backend is available, but as we might
use other backends in the future, this does not seem to be the best choice.
For this to work, we also need to make the 'targets_to_build' information
available.
Suggested-by: Michael Kruse <llvm@meinersbur.de>
llvm-svn: 296853
At this stage, we do not yet modify the IR but just generate a default
initialized ppcg_scop and gpu_prog and free both immediately. Both will later be
filled with data from the polly::Scop and are needed to use PPCG for GPU
schedule generation. This commit does not yet perform any GPU code generation,
but ensures that the basic infrastructure has been put in place.
We also add a simple test case to ensure the new code is run and use this
opportunity to verify that GPU_CODEGEN tests are only run if GPU code generation
has been enabled in cmake.
llvm-svn: 275389
We used checks to minimize the number of remarks we present to a user
but these checks can become expensive, especially since all wrapping
assumptions are emitted separately. Because there is not benefit for a
"headless" run we put these checks under a command line flag. Thus, if
the flag is not given we will emit "non-effective" remarks, e.g.,
duplicates and revert to the old behaviour if it is given. As this
also changes the internal representation of some sets we set the flag
by default for our unit tests.
llvm-svn: 266087
This single option replaces -polly-detect-unprofitable and -polly-no-early-exit
and is supposed to be the only option that disables compile-time heuristics that
aim to bail out early on scops that are believed to not benefit from Polly
optimizations.
Suggested-by: Johannes Doerfert
llvm-svn: 249426
This commit drops the Cloog support for Polly. The scripts and
documentation are changed to only use isl as prerequisity. In the code
all Cloog specific parts have been removed and all relevant tests have
been ported to the isl backend when it was created.
llvm-svn: 223141
This replaces the use of %defaultOpts = '-basicaa -polly-prepare' with the
minimal set of passes necessary for a test to succeed. Of the test cases that
previously used %defaultOpts 76 test cases require none of these passes, 42
need -basicaa and only 2 need -polly-prepare. Our change makes this requirement
explicit.
In Polly many test cases have been using a macro '%defaultOpts' which run a
couple of preparing passes before the actual Polly test case. This macro was
introduced very early in the development of Polly and originally contained a
large set of canonicalization passes. However, as the need for additional
canonicalization passes makes test cases harder to understand and also more
fragile in terms of changes in such passes, we aim since a longer time to only
include the minimal set of passes necessary. This patch removes the last
leftovers from of %defaultOpts and brings our tests cases more in line to what
is usus in LLVM itself.
llvm-svn: 216815
We now support regions with multiple entries and multiple exits natively.
Regions are not needed to be simplified to single entry and single exit.
We need to XFAIL two test cases as this change increases the scop coverage
and uncoveres two failures in the independent blocks pass. The first failure
will be fixed in a subsequent commit, the second one is in the non-default
-polly-codegen-scev mode and still needs to be fixed.
Contributed-by: Star Tan <tanmx_star@yeah.net>
llvm-svn: 179673
Similar to LLVM we now follow the policy of only having LLVM-IR level tests in
the Polly test suite. Testing for miscompilation of larger programs should be
done with the llvm test suite.
llvm-svn: 167255
Translate the selected parallel loop body into a ptx string and run it with the
cuda driver API. We limit this preliminary implementation to target the
following special test cases:
- Support only 2-dimensional parallel loops with or without only one innermost
non-parallel loop.
- Support write memory access to only one array in a SCoP.
The patch was committed with smaller changes to the build system:
There is now a flag to enable gpu code generation explictly. This was required
as we need the llvm.codegen() patch applied on the llvm sources, to compile this
feature correctly. Also, enabling gpu code generation does not require cuda.
This requirement was removed to allow 'make polly-test' runs, even without an
installed cuda runtime.
Contributed by: Yabin Hu <yabin.hwu@gmail.com>
llvm-svn: 161239
serge_sans_paille