Besides a couple of cleanups and refactorings in isl, this change set fixes a
couple of bugs in isl, that can cause issues during code generation.
llvm-svn: 243110
These test cases check whether Polly still gives the same results if
LICM runs before. Currently, it does not and therefore these cases are
expected fails.
llvm-svn: 243037
As specified in PR23888, run-time alias check generation is expensive
in terms of compile-time. This reduces the compile time by computing
minimal/maximal access only once for each base pointer
Contributed-by: Pratik Bhatu <cs12b1010@iith.ac.in>
llvm-svn: 243024
A similar patch will be upstreamed to ISL. We commit this ahead of time to
unblock people that are annoyed the permanent diffs we see in git.
llvm-svn: 243020
Put all Polly targets into a single "Polly" category (i.e.
solution folder). Previously there was no recognizable scheme and most
categories contained just one or two targets or targets didn't belong
to any category.
Reviewers: grosser
llvm-svn: 242779
Remove the polly_headers_do_not_build project. Visual Studio is capable
of finding the headers itself, although they are not listed explicitly.
For explicit listing, the headers should be added to the relevant
target.
Reviewers: grosser
llvm-svn: 242777
Query the isl_config.h macros recently added to ISL. One of it looks for
the ffs (find first set), whose functionality is available in Visual
Studio with _BitScanForward. Also add isl_ffs.c to the source files
which contains the implementation of ffs using _BitScanForward.
Reviewers: grosser
llvm-svn: 242770
Instead of flat schedules, we now use so-called schedule trees to represent the
execution order of the statements in a SCoP. Schedule trees make it a lot easier
to analyze, understand and modify properties of a schedule, as specific nodes
in the tree can be choosen and possibly replaced.
This patch does not yet fully move our DependenceInfo pass to schedule trees,
as some additional performance analysis is needed here. (In general schedule
trees should be faster in compile-time, as the more structured representation
is generally easier to analyze and work with). We also can not yet perform the
reduction analysis on schedule trees.
For more information regarding schedule trees, please see Section 6 of
https://lirias.kuleuven.be/handle/123456789/497238
llvm-svn: 242130
Named isl sets can generally have any name if they remain within Polly, but only
certain strings can be parsed by isl. The new names we create ensure that we
can always copy-past isl strings from Polly to other isl tools, e.g. for
debugging.
llvm-svn: 241787
This updated contains various changes to isl, including improvements to the
AST generator. For Polly, the most important change is a fix that unbreaks
builds on darwin (reported by: Jack Howard)
llvm-svn: 241048
Summary: Adding the flag to C++ source files emits a warning, hence we set the compile flag depending on the file's language.
Reviewers: grosser
Subscribers: Meinersbur, pollydev, llvm-commits
Projects: #polly
Differential Revision: http://reviews.llvm.org/D10809
llvm-svn: 240986
This is very preliminary support, but it seems to work for the most common case.
When observing more/different test cases, we can work on generalizing this.
llvm-svn: 240955
As Polly got a lot faster after the small-integer-optimization imath
patch, we now increase the compute out to optimize larger kernels. This
should also expose additional slow-downs for us to address.
In LNT this gives us a 3.4x speedup on 3mm, at a cost of a 2x increase in
compile time (now 0.77s). reg_detect, oorafft and adi also show some compile
time increases. This compile time cost is divided between more time in isl and
more time in LLVM's backends due to increased code size (versioning and tiling).
llvm-svn: 240840
In case we have modulo operations in the access function (supported since
r240518), the assumptions generated to ensure array accesses remain within
bounds can contain existentially quantified dimensions which results in more
complex and more difficult to handle integer sets. As a result LNT's linpack
benchmark started to fail due to excessive compile time.
We now just drop the existentially quantified dimensions. This should be
generally save, but may result in less precise assumptions which may
consequently make us fall back to the original (unoptimized) code more often. In
practice, these cases probably do not appear to often.
I had difficulties to extract a good test case, but fortunately our LNT bots
cover this one well.
llvm-svn: 240775
This removes old code that has been disabled since several weeks and was hidden
behind the flags -disable-polly-intra-scop-scalar-to-array=false and
-polly-model-phi-nodes=false. Earlier, Polly used to translate scalars and
PHI nodes to single element arrays, as this avoided the need for their special
handling in Polly. With Johannes' patches adding native support for such scalar
references to Polly, this code is not needed any more. After this commit both
-polly-prepare and -polly-independent are now mostly no-ops. Only a couple of
simple transformations still remain, but they are scheduled for removal too.
Thanks again to Johannes Doerfert for his nice work in making all this code
obsolete.
llvm-svn: 240766
Summary:
With small integer optimization (short: sio) enabled, ISL uses 32 bit
integers for its arithmetic and only falls back to a big integer library
(in the case of Polly: IMath) if an operation's result is too large.
This gives a massive performance boost for most application using ISL.
For instance, experiments with ppcg (polyhedral source-to-source
compiler) show speed-ups of 5.8 (compared to plain IMath), respectively
2.7 (compared to GMP).
In Polly, a smaller fraction of the total compile time is taken by ISL,
but the speed-ups are still very significant. The buildbots measure
compilation speed-up up to 1.8 (oourafft, floyd-warshall, symm). All
Polybench benchmarks compile in at least 9% less time, and about 20%
less on average.
Detailed Polybench compile time results (median of 10):
correlation -25.51%
covariance -24.82%
2mm -26.64%
3mm -28.69%
atax -13.70%
bicg -10.78%
cholesky -40.67%
doitgen -11.60%
gemm -11.54%
gemver -10.63%
gesummv -11.54%
mvt -9.43%
symm -41.25%
syr2k -14.71%
syrk -14.52%
trisolv -17.65%
trmm -9.78%
durbin -19.32%
dynprog -9.09%
gramschmidt -15.38%
lu -21.77%
floyd-warshall -42.71%
reg_detect -41.17%
adi -36.69%
fdtd-2d -32.61%
fdtd-apml -21.90%
jacobi-1d-imper -9.41%
jacobi-2d-imper -27.65%
seidel-2d -31.00%
Reviewers: grosser
Reviewed By: grosser
Subscribers: Meinersbur, llvm-commits, pollydev
Projects: #polly
Differential Revision: http://reviews.llvm.org/D10506
llvm-svn: 240689
There were two issues:
* ISL's configure generates include/isl/stdint.h, not isl/stdint.h as
assumed. This is also changed in the CMake build.
* Need to pass --with-int=imath to ISL's configure; the default is gmp.
Polly's configure has been regenerated due to changing configure.ac
llvm-svn: 240657
Remainder operations with constant divisor can be modeled as quasi-affine
expression. This patch adds support for detecting and modeling them. We also
add a test that ensures they are correctly code generated.
This patch was extracted from a larger patch contributed by Johannes Doerfert
in http://reviews.llvm.org/D5293
llvm-svn: 240518
This makes the test cases nonaffine even if Polly some days gains support for
the srem instruction, an instruction which is currently not modeled but which
can clearly be modeled statically. A call to a function without definition
will always remain non-affine, as there is just insufficient static information
for it to be modeled more precisely.
llvm-svn: 240458
ISL with small integer optimization requires C99 to compile. gcc < 5.0
still uses C89 as default, so we need to enable the options to compile
in C99 mode.
This patch is preparing the actual activation of small integer
optimization.
Differential version: http://reviews.llvm.org/D10610
Reviewers: grosser
llvm-svn: 240322
ISL's ./configure examines the system for the stdint.h to include and
creates a header file that points to it. On C99-compatible system
#include <stdint.h>
is always valid such there no need for system introspection. This should
unbreak the build bots.
llvm-svn: 240315
The 'make dist' archive is not dependent on ./configure output and
contains a GIT_HEAD_ID file that identifies the version of ISL used.
None of the files added or removed are used part of Polly's build
process (except of GIT_HEAD_ID since the previous revision r240301). No
functional change intended.
llvm-svn: 240306
Currently the Polly repository contains the ISL sources with bogus
isl_config.h and gitversion.h. This is problematic. In this state a
macro
#define __attribute__(x)
becomes active in the source, leading to various problems e.g. when
included before system header files. This patch will instead generate
the two files specific to the host system at configure-time.
For CMake, we replicate the tests that ISL's configure performs using
try_compile(). In autotools build, we just invoke ISL's configure to
generate the two files. This consequently required regenerating
autoconf/configure.
'make dist' distributions of ISL contain a file GIT_HEAD_ID which
contains the version the distribution is derived from. The repository
files themselves do not contain such a hint. In a later commit we will
replace the isl directory by the contents of such a .tar.gz. It does
not contain the files imdrover.c iprime.c pi.c and rsamath.c currently
compiled into Polly, but not used and therefore are removed by this
patch.
In the long term we plan to generate a dedicated library for ISL instead
of adding its files to Polly.
This also does not yet include the switch to small-integer optimized ISL
nor enabling C99 mode required for the former. Those will come as well
in separate patches.
Differential version: http://reviews.llvm.org/D10603
Reviewers: grosser
llvm-svn: 240301
This was meant to committed in r240027, but was left behind because
svn, in contrast to git, only commits the changes in the directory you
are currently in.
llvm-svn: 240034
This version adds small integer optimization, but is not active by
default. It will be enabled in a later commit.
The schedule-fuse=min/max option has been replaced by the
serialize-sccs option. Adapting Polly was necessary, but retaining the
name polly-opt-fusion=min/max.
Differential Revision: http://reviews.llvm.org/D10505
Reviewers: grosser
llvm-svn: 240027
LLVM's instcombine already translates power-of-two sdivs that are known to be
exact to fast ashr instructions. Hence, there is no need to add this logic
ourselves.
Pointed-out-by: Johannes Doerfert
llvm-svn: 239025
We now verify that memory access functions imported via JSON are indeed defined
for the full iteration domain. Before this change we accidentally imported
memory mappings such as i -> i / 127, which only defined a mapped for values of
i that are evenly divisible by 127, but which did not define any mapping for the
remaining values, with the result that isl just generated an access expression
that had undefined behavior for all the unmapped values.
In the incorrect test cases, we now either use floor(i/127) or we use p/127 and
provide the information that p is indeed a multiple of 127.
llvm-svn: 239024
floord(a,b) === a ashr log_2 (b) holds for positive and negative a's, but
shifting only makes sense for positive values of b. The previous patch did
not consider this as isl currently always produces postive b's. To avoid future
surprises, we check that b is positive and only then apply the optimization.
We also now correctly check the return value of the dyn-cast.
No additional test case, as isl currently does not produce negative
denominators.
Reported-by: David Majnemer <david.majnemer@gmail.com>
llvm-svn: 238927
Running indvar before Polly is useful as this eliminates zexts as they commonly
appear when a 32 bit induction variable (type int) was used on a 64 bit system.
These zexts confuse our delinearization and prevent for example the successful
delinearization of the nussinov kernel in polybench-c-4.1.
This fixes http://llvm.org/PR23426
Suggested-by: Xing Su <xsu.llvm@outlook.com>
llvm-svn: 238643
isl marks known non-negative numerators in modulo (and soon also division)
operations. We now exploit this by generating unsigned operations. This is
beneficial as unsigned operations with power-of-two denominators will be
translated by isl to fast bitshift or bitwise and operations.
llvm-svn: 238577
David Blaikie:
"find returns an iterator by value, so it's just added complexity/strangeness to
then use reference lifetime extension to give it the same semantics as if you'd
used a value type instead of a reference type."
llvm-svn: 238294
David Blaike suggested this as an alternative to the use of owningptr(s) for our
memory management, as value semantics allow to avoid the additional interface
complexity caused by owningptr while still providing similar memory consistency
guarantees. We could also have used a std::vector, but the use of std::vector
would yield possibly changing pointers which currently causes problems as for
example the memory accesses carry pointers to their parent statements. Such
pointers should not change.
Reviewer: jblaikie, jdoerfert
Differential Revision: http://reviews.llvm.org/D10041
llvm-svn: 238290
While looking through the test cases I realized we did not have a CHECK line
for a duplicate memory access which we may want to eliminate later. To ensure
we do not have (or later introduce) unnecessary memory accesses, we now tighten
the test cases to look for such a pattern (and add the CHECK: line that shows
the redundant memory access).
llvm-svn: 238227
The feature itself has been committed by Johannes in r238070. As this is the
way forward, we now enable it to ensure we get test coverage.
Thank you Johannes for this nice work!
llvm-svn: 238088
This ensures we pass all tests independently of how we set the options
-disable-polly-intra-scop-scalar-to-array and -polly-model-phi-nodes.
(At least if we enable both or disable both. Enabling them individually makes
little sense, as they will hopefully disappear soon anyhow).
llvm-svn: 238087
To reduce compile time and to allow more and better quality SCoPs in
the long run we introduced scalar dependences and PHI-modeling. This
patch will now allow us to generate code if one or both of those
options are set. While the principle of demoting scalars as well as
PHIs to memory in order to communicate their value stays the same,
this allows to delay the demotion till the very end (the actual code
generation). Consequently:
- We __almost__ do not modify the code if we do not generate code
for an optimized SCoP in the end. Thus, the early exit as well as
the unprofitable option will now actually preven us from
introducing regressions in case we will probably not get better
code.
- Polly can be used as a "pure" analyzer tool as long as the code
generator is set to none.
- The original SCoP is almost not touched when the optimized version
is placed next to it. Runtime regressions if the runtime checks
chooses the original are not to be expected and later
optimizations do not need to revert the demotion for that part.
- We will generate direct accesses to the demoted values, thus there
are no "trivial GEPs" that select the first element of a scalar we
demoted and treated as an array.
Differential Revision: http://reviews.llvm.org/D7513
llvm-svn: 238070
Instead of explicitly building constraints and adding them to our maps we
now use functions like map_order_le to add the relevant information to the
maps.
llvm-svn: 237934
Being here, we extend the interface to return the element type and not a pointer
to the element type. We also provide a function to get the size (in bytes) of
the elements stored in this array.
We currently still store the element size as an innermost dimension in
ScopArrayInfo, which is somehow inconsistent and should be addressed in future
patches.
llvm-svn: 237779
Besides a couple of interface cleanups, this change also contains a performance
optimization of isl_mat_product that should give us up to almost 6% compiletime
reduction.
llvm-svn: 237616
This code has been part of Polly's GPGPU backend, which has been remove together
with the code generation backend. Development now continues in an out-of-tree
branch.
llvm-svn: 237450
This reference ID is handy for use cases where we need to identify individual
memory accesses (e.g. to modify their access functions).
This is a reworked version of a patch originally developed by Yabin Hu as part
of his summer of code project.
llvm-svn: 237431
Modified two test cases to adjust to the above change in renaming.
These two files were causing the buildbot failure in Polly, #30204 for example.
Details in http://reviews.llvm.org/D9483
This checkin goes with r237150 and r237151
llvm-svn: 237203
Besides class, function and file names, we also change the command line option
from -polly-codegen-isl to just -polly-codegen. The isl postfix is a leftover
from the times when we still had the CLooG based -polly-codegen. Today it is
just redundant and we drop it.
llvm-svn: 237099
Upcoming revisions of isl require us to include header files explicitly, which
have previously been already transitively included. Before we add them, we sort
the existing includes.
Thanks to Chandler for sort_includes.py. A simple, but very convenient script.
llvm-svn: 236930
This patch also changes the implementation of the ArrayInfoMap to a MapVector
which will ensure that iterating over the list of ArrayInfo objects gives
predictable results. The single loop that currently enumerates the ArrayInfo
objects only frees the individual objectes, hence a possibly changing
iteration order does not affect the outcome. The added robustness is for
future users of this interface.
llvm-svn: 236583
In the lnt benchmark MultiSource/Benchmarks/MallocBench/gs/gs with
scalar and PHI modeling we detected the multidimensional accesses
with sizes variant in the SCoP. This will check the sizes for validity.
llvm-svn: 236395
This change adds location information for the detected regions in Polly when the
required debug information is available.
The JSCOP output format is extended with a "location" field which contains the
information in the format "source.c:start-end"
The dot output is extended to contain the location information for each nested
region in the analyzed function.
As part of this change, the existing getDebugLocation function has been moved
into lib/Support/ScopLocation.cpp to avoid having to include
polly/ScopDetectionDiagnostics.h.
Differential Revision: http://reviews.llvm.org/D9431
Contributed-by: Roal Jordans <r.jordans@tue.nl>
llvm-svn: 236393
There is no need for other passes to access the code-generator command-line
option. Hence, drop it from the header to simplify the interface.
llvm-svn: 235866
This option is enabled since a long time and there does not seem to be a
situation in which we would not want to print alias scopes. Remove this option
to reduce the set of command-line option combinations that may expose bugs.
llvm-svn: 235861
We moved this implementation into the header file to share it between
the CLooG and isl code generator. As the CLooG code generator was dropped,
the implementation can be folded back into the .cpp file.
No functional change intended.
llvm-svn: 235860
When reading parameters from a JSON file parameters with identical names
may be related to different isl_ids, which then causes isl to treat them
as differnet objects. This does not cause issues at the moment, but has
shown problematic in subsequent schedule tree changes.
This commit will be tested by the following changes.
llvm-svn: 235588
I just learned that target triples prevent test cases to be run on other
architectures. Polly test cases are until now sufficiently target independent
to not require any target triples. Hence, we drop them.
llvm-svn: 235384
In Polly we used both the term 'scattering' and the term 'schedule' to describe
the execution order of a statement without actually distinguishing between them.
We now uniformly use the term 'schedule' for the execution order. This
corresponds to the terminology of isl.
History: CLooG introduced the term scattering as the generated code can be used
as a sequential execution order (schedule) or as a parallel dimension
enumerating different threads of execution (placement). In Polly and/or isl the
term placement was never used, but we uniformly refer to an execution order as a
schedule and only later introduce parallelism. When doing so we do not talk
about about specific placement dimensions.
llvm-svn: 235380
This change is a step towards using a single isl_schedule object throughout
Polly. At the moment the schedule is just constructed from the flat
isl_union_map that defines the schedule. Later we will obtain it directly
from the scop and potentially obtain a schedule with a non-trivial internal
structure that will allow faster dependence analysis.
llvm-svn: 235378
isl_union_map_compute_flow() has been replaced by
isl_union_access_info_compute_flow(). This change does not intend to
change funcitonality, yet. However, it will allow us to pass in subsequent
changes schedule trees to the dependence analysis instead of flat schedules.
This should speed up dependence analysis for important cases significantly.
llvm-svn: 235373
Otherwise, instructions in different functions that share the same pointer (due
to earlier modifications), might get assigned incorrect memory access
information (belonging to instructions in previous functions), which can result
in arbitrary memory corruption and assertion failures.
This fixes llvm.org/PR23160 and possibly also llvm.org/PR23167.
Note: InsnToMemAcc is a global variable that should never have existed in the
first place. We will clean this up in a subsequent patch.
Reported-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Debugged-by: Johannes Doerfert <doerfert@cs.uni-saarland.de>
llvm-svn: 235254
This will allow the ScopInfo to build the polyhedral representation for
non-affine regions that contain loops. Such loops are basically not visible
in the SCoP representation. Accesses that are variant in such loops are
therefor represented as non-affine accesses.
Differential Revision: http://reviews.llvm.org/D8153
llvm-svn: 234713
This will allow the ScopDetection to detect non-affine regions that
contain loops. All loops contained will be collected and are
accessible to later passes in order to adjust the access functions.
As the loops are non-affine and will not be part of the polyhedral
representation later, all accesses that are variant in these loops
have to be over approximated as non-affine accesses. They are
therefore handled the same way as other non-affine accesses.
Additionally, we do not count non-affine loops for the profitability
heuristic, thus a region with only a non-affine loop will only be
detected if the general detection of loop free regions is enabled.
Differential Revision: http://reviews.llvm.org/D8152
llvm-svn: 234711
This change ensures that we sign-extend integer types in case non-matching
operands are encountered when generating a multi-dimensional access offset.
This fixes http://llvm.org/PR23124
Reported-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
llvm-svn: 234122
As soon as one operand of the product is invalid, the entire product is invalid.
This happens for example if one of the operands is not loop-invariant.
This fixes http://llvm.org/PR23125
Reported-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com
llvm-svn: 234119
Tobias Grosser