This attribute computes the optimistic live call edges using the attributor
liveness information. This attribute will be used for deriving a
inter-procedural function reachability attribute.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D104059
For ELF, since all counters/data are in a section group (either `comdat any` or
`comdat noduplicates`), and the signature for `comdat any` is `__profc_`, the
D1003372 optimization prerequisite (linker GC cannot discard data variables
while the text section is retained) is always satisified, we can make __profd_
unconditionally private.
Reviewed By: davidxl, rnk
Differential Revision: https://reviews.llvm.org/D103717
This pass emits a floating point compare and a conditional branch,
but if strictfp is enabled we don't emit a constrained compare
intrinsic.
The backend also won't expand the readonly sqrt call this pass inserts
to a sqrt instruction under strictfp. So we end up with 2 libcalls as
seen here. https://godbolt.org/z/oax5zMEWd
Fix these things by disabling the pass.
Differential Revision: https://reviews.llvm.org/D104479
These other platforms are unsupported and untested.
They could be re-added later based on MSan code.
Reviewed By: gbalats, stephan.yichao.zhao
Differential Revision: https://reviews.llvm.org/D104481
The old version of this code would blindly perform arithmetic without
paying attention to whether the types involved were pointers or
integers. This could lead to weird expressions like negating a pointer.
Explicitly handle simple cases involving pointers, like "x < y ? x : y".
In all other cases, coerce the operands of the comparison to integer
types. This avoids the weird cases, while handling most of the
interesting cases.
Differential Revision: https://reviews.llvm.org/D103660
The target specific expression handling was slightly regressed by
bbea64250f. This restores the proper
sub-expression evaluation to allow for constant folding within the
expression. We explicitly discard the layout and assembler when
evaluating the expression to avoid any symbolic computation and instead
using the `evaluateAsRelocatable` to canonicalise and constant fold
only.
We can also simplify the expression handling - none of the target
variants support symbolic difference. This simplifies the logic for
that and adds additional tests to ensure that we do not accidentally
regress here in the future.
Reviewed By: maskray
Differential Revision: https://reviews.llvm.org/D104473
When we removed the allocator<void> specialization, the triviality of
std::allocator<void> changed because the primary template had a
non-trivial default constructor and the specialization didn't
(so std::allocator<void> went from trivial to non-trivial).
This commit fixes that oversight by giving a trivial constructor to
the primary template when instantiated on cv-void.
This was reported in https://llvm.org/PR50299.
Differential Revision: https://reviews.llvm.org/D104398
This fixes a GISEL vs SDAG regression that showed up at -Os in 256.bzip2
In `_getAndMoveToFrontDecode`:
gisel:
```
and w9, w0, #0xff
orr w9, w9, w8, lsl #8
```
sdag:
```
bfi w0, w8, #8, #24
```
Differential revision: https://reviews.llvm.org/D103291
When the number of shared libs is massive, there could be hundreds of
thousands of short lived progress events sent to the IDE, which makes it
irresponsive while it's processing all this data. As these small jobs
take less than a second to process, the user doesn't even see them,
because the IDE only display the progress of long operations. So it's
better not to send these events.
I'm fixing that by sending only the events that are taking longer than 5
seconds to process.
In a specific run, I got the number of events from ~500k to 100, because
there was only 1 big lib to parse.
I've tried this on several small and massive targets, and it seems to
work fine.
Differential Revision: https://reviews.llvm.org/D101128
Fold all exits based on known trip count/multiple information from
SCEV. Previously only the latch exit or the single exit were folded.
This doesn't yet eliminate ULO.TripCount and ULO.TripMultiple
entirely: They're still used to a) decide whether runtime unrolling
should be performed and b) for ORE remarks. However, the core
unrolling logic is independent of them now.
Differential Revision: https://reviews.llvm.org/D104203
This patch will allow developers to remove unwanted instruction Defs (most likely from within a target specific InstrPostProcess) by setting that Def's RegisterID to 0.
Differential Revision: https://reviews.llvm.org/D104433
This change revisits https://reviews.llvm.org/D79248 which originally
added support for the --unresolved-symbols flag.
At the time I thought it would make sense to add a third option to this
flag called `import-functions` but it turns out (as was suspects by on
the reviewers IIRC) that this option can be authoganal.
Instead I've added a new option called `--import-undefined` that only
operates on symbols that can be imported (for example, function symbols
can always be imported as opposed to data symbols we can only be
imported when compiling with PIC).
This option gives us the full expresivitiy that emscripten needs to be
able allow reporting of undefined data symbols as well as the option to
disable that.
This change does remove the `--unresolved-symbols=import-functions`
option, which is been in the codebase now for about a year but I would
be extremely surprised if anyone was using it.
Differential Revision: https://reviews.llvm.org/D103290
This really isn't talking about vectors in general,
but only about either fixed or scalable vectors,
and it's pretty confusing to see it state
that there aren't any vectors :)
Summary:
AIX does not support --as-needed linker options. Remove that option from
aix linker when -lunwind is needed.
For unwinder library, nothing special is needed because by default aix
linker has the as-needed effect for library that's an archive (which is
the case for libunwind on AIX).
Reviewed By: daltenty
Differential Revision: https://reviews.llvm.org/D104314
ICF = Identical C(ode|OMDAT) Folding
This is the LLD ELF/COFF algorithm, adapted for MachO. So far, only `-icf all` is supported. In order to support `-icf safe`, we will need to port address-significance tables (`.addrsig` directives) to MachO, which will come in later diffs.
`check-{llvm,clang,lld}` have 0 regressions for `lld -icf all` vs. baseline ld64.
We only run ICF on `__TEXT,__text` for reasons explained in the block comment in `ConcatOutputSection.cpp`.
Here is the perf impact for linking `chromium_framekwork` on a Mac Pro (16-core Xeon W) for the non-ICF case vs. pre-ICF:
```
N Min Max Median Avg Stddev
x 20 4.27 4.44 4.34 4.349 0.043029977
+ 20 4.37 4.46 4.405 4.4115 0.025188761
Difference at 95.0% confidence
0.0625 +/- 0.0225658
1.43711% +/- 0.518873%
(Student's t, pooled s = 0.0352566)
```
Reviewed By: #lld-macho, int3
Differential Revision: https://reviews.llvm.org/D103292
The library depends on Attributes.inc, so it has to depend on the intrinsics_gen target
Reviewed By: v.g.vassilev
Differential Revision: https://reviews.llvm.org/D104311
A few slipped through the cracks because D104175 and D104170 didn't
concern themselves with newer commits.
Differential Revision: https://reviews.llvm.org/D104414
This is to fix build on Android. And we don't want to intercept more new/delete operators on Android.
Differential Revision: https://reviews.llvm.org/D104313
This re-architects the RISCV relocation handling to bring the
implementation closer in line with the implementation in binutils. We
would previously aggressively resolve the relocation. With this
restructuring, we always will emit a paired relocation for any symbolic
difference of the type of S±T[±C] where S and T are labels and C is a
constant.
GAS has a special target hook controlled by `RELOC_EXPANSION_POSSIBLE`
which indicates that a fixup may be expanded into multiple relocations.
This is used by the RISCV backend to always emit a paired relocation -
either ADD[WIDTH] + SUB[WIDTH] for text relocations or SET[WIDTH] +
SUB[WIDTH] for a debug info relocation. Irrespective of whether linker
relaxation support is enabled, symbolic difference is always emitted as
a paired relocation.
This change also sinks the target specific behaviour down into the
target specific area rather than exposing it to the shared relocation
handling. In the process, we also sink the "special" handling for debug
information down into the RISCV target. Although this improves the path
for the other targets, this is not necessarily entirely ideal either.
The changes in the debug info emission could be done through another
type of hook as this functionality would be required by any other target
which wishes to do linker relaxation. However, as there are no other
targets in LLVM which currently do this, this is a reasonable thing to
do until such time as the code needs to be shared.
Improve the handling of the relocation (and add a reduced test case from
the Linux kernel) to ensure that we handle complex expressions for
symbolic difference. This ensures that we correct relocate symbols with
the adddends normalized and associated with the addition portion of the
paired relocation.
This change also addresses some review comments from Alex Bradbury about
the relocations meant for use in the DWARF CFA being named incorrectly
(using ADD6 instead of SET6) in the original change which introduced the
relocation type.
This resolves the issues with the symbolic difference emission
sufficiently to enable building the Linux kernel with clang+IAS+lld
(without linker relaxation).
Resolves PR50153, PR50156!
Fixes: ClangBuiltLinux/linux#1023, ClangBuiltLinux/linux#1143
Reviewed By: nickdesaulniers, maskray
Differential Revision: https://reviews.llvm.org/D103539
Reapply the commit which previously caused build failures due to the
mismatched template arguments between the return type and the returned
SmallVector.
This reverts commit e8991caea8.
We need to dedup archive loads (similar to what we do for dylib
loads).
I noticed this issue after building some Swift stuff that used
`-force_load_swift_libs`, as it caused some Swift archives to be loaded
many times.
Reviewed By: #lld-macho, thakis, MaskRay
Differential Revision: https://reviews.llvm.org/D104353
In D103169 I'm adding to InstSimplify support for NaN to constrained
intrinsics that have a regular FP IR instruction counterpart. Precommit
the tests for clarity when that ticket lands.
Fixed crash when doing pointer math on a void pointer.
Also, reworked test to use -verify rather than FileCheck.
Reviewed By: erichkeane
Differential Revision: https://reviews.llvm.org/D104424
This patch fixes an issue where builds of programs with multiple dbg.values
with DIArgList locations could have non-deterministic output. This issue
was caused by ReplaceableMetadataImpl::getAllArgListUsers, which
returned DIArgList pointers in a random order; the output of this
function would later be used to insert dbg.values, causing the order of
insertion to be non-deterministic. This patch changes getAllArgListUsers
to return pointers in a fixed order.
Differential Revision: https://reviews.llvm.org/D104105
This is part 2, covering the commands source.
Some uses remain where it's tricky to see what the
logic is or they are not used with AppendError.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104448