Compare the directory paths returned by lldb-vscode against realpaths
rather than apparent paths. This matches lldb-vscode behavior
and therefore fixes test failures when one of the parent directories
of the source tree is a symlink.
Differential Revision: https://reviews.llvm.org/D65432
llvm-svn: 367291
rL357954 did increase `packet-timeout` 1sec -> 5secs. Which is IMO about the
maximum timeout reasonable for regular use. But for testsuite I think the
timeout should be higher as the testsuite runs in parallel and it can be run
even on slow hosts and with other load (moreover if it runs on some slow arch).
I have chosen 60 secs, that should be enough hopefully. Larger value could
make debugging with hanging `lldb-server` annoying.
This patch was based on this testsuite timeout:
http://lab.llvm.org:8014/builders/lldb-x86_64-fedora/builds/546/steps/test/logs/stdio
FAIL: test_connect (TestGDBRemoteClient.TestGDBRemoteClient)
Test connecting to a remote gdb server
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/jkratoch/slave-lldb-x86_64-fedora/lldb-x86_64-fedora/llvm/tools/lldb/packages/Python/lldbsuite/test/functionalities/gdb_remote_client/TestGDBRemoteClient.py", line 13, in test_connect
process = self.connect(target)
File "/home/jkratoch/slave-lldb-x86_64-fedora/lldb-x86_64-fedora/llvm/tools/lldb/packages/Python/lldbsuite/test/functionalities/gdb_remote_client/gdbclientutils.py", line 480, in connect
self.assertTrue(error.Success(), error.description)
AssertionError: False is not True : failed to get reply to handshake packet
Differential Revision: https://reviews.llvm.org/D65271
llvm-svn: 367234
Mark the process as stopped when SIGSTOP arrives. This is necessary
for lldb-server to generate correct response to 'process interrupt',
and therefore to prevent the whole stack crashing when process
is stopped.
Thanks to Pavel Labath for the tip.
Differential Revision: https://reviews.llvm.org/D65289
llvm-svn: 367047
Summary: update some test decorates that can actually pass on andriod aarch64
Patch by Wanyi Ye <kusmour@gmail.com>
Differential Revision: https://reviews.llvm.org/D64767
llvm-svn: 366858
On slower machines the vscode testcases were sometimes hanging:
1910 ? Sl 0:00 | \_ /usr/bin/python .../llvm/tools/lldb/test/dotest.py ... -p TestVSCode_setBreakpoints.py
2649 ? Sl 0:00 | \_ .../build/bin/lldb-vscode
2690 ? S 0:00 | \_ .../build/bin/lldb-server gdbserver --fd=9 --native-regs --setsid
2708 ? t 0:00 | \_ .../build/lldb-test-build.noindex/tools/lldb-vscode/breakpoint/TestVSCode_setBreakpoints.test_functionality/a.out
A reproducer of the racy bug for send_recv():
# self.send_packet(command)
#+ import time
#+ time.sleep(1)
# done = False
I guess `request_continue` was probably originally intended to be synchronous
but then it isn't and this code has been leftover there.
Differential revision: https://reviews.llvm.org/D65163
llvm-svn: 366850
Summary: lldb-mi has been removed, but there are still a bunch of references in the code base. This patch removes all of them.
Reviewers: JDevlieghere, jfb
Reviewed By: JDevlieghere
Subscribers: dexonsmith, ki.stfu, mgorny, abidh, jfb, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D64992
llvm-svn: 366590
D62502, together with D62503 have broken the builds which have XML
support enabled. Reverting D62503 (r364355) fixed that, but has broken
has left some of the tests introduced by D62502 broken more or less
nondeternimistically (it depended on whether the system happens to place
the library list near unreadable pages of memory). I attempted to make a
partial fix for this in r364748, but Jan Kratochvil pointed out that
this reintroduces the problem which reverting D62503 was trying to
solve.
So instead, I back out the whole thing so we can get back to a clean
slate that works for everyone. We can figure out a way forward from
there.
This reverts r364748, r363772 and r363707.
llvm-svn: 364751
on some systems this test fails because the two methods it uses to
cross-reference the data don't match in the case of the vdso module. The
"read from /proc/%pid/maps" method returns "[vdso]", while the method
which reads it from the linker rendezvous structures returns
"linux-vdso.so.1". Neither of the two names match any actual file.
This restricts the test to only consider the libraries that we ourselves
have added to the test, minimizing the impact of system dependencies
that we cannot control.
llvm-svn: 363772
Summary:
This is the fourth patch to improve module loading in a series that started here (where I explain the motivation and solution): D62499
Implement the `xfer:libraries-svr4` packet by adding a new function that generates the list and then in Handle_xfer I generate the XML for it. The XML is really simple so I'm just using string concatenation because I believe it's more readable than having to deal with a DOM api.
Reviewers: clayborg, xiaobai, labath
Reviewed By: labath
Subscribers: emaste, mgorny, srhines, krytarowski, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D62502
llvm-svn: 363707
D55859 <https://reviews.llvm.org/D55859> has no effect for some of the
testcases so this patch extends it even for (all?) other testcases known to me.
LLDB was failing when LLDB prints errors reading system debug infos
(`*-debuginfo.rpm`, DWZ-optimized) which should never happen as LLDB testcases
should not be affected by system debug infos.
`lldb/packages/Python/lldbsuite/test/api/multithreaded/driver.cpp.template` is
using only SB API which does not expose `ModuleList` so I had to call
`HandleCommand()` there.
`lldb-test.cpp` could also use `HandleCommand` and then there would be no need
for `ModuleListProperties::SetEnableExternalLookup()` but I think it is cleaner
with API and not on based on text commands.
Differential Revision: https://reviews.llvm.org/D63339
llvm-svn: 363567
The test is failing sometimes because the debugger is failing to attach for lack of permissions. The fix is to call lldb_enable_attach inside the inferior main function
llvm-svn: 360371
Summary:
The test was failing occasionally (1% of runs or so), because of
unpredictable timings between the two threads spawned by the test. If
the second thread hit the breakpoint right as we were stepping out of
the function on the first thread, we would still be stuck at the inner
frame when the process stopped.
This would cause errors like:
File "/home/worker/lldb-x86_64-debian/lldb-x86_64-debian/llvm/tools/lldb/packages/Python/lldbsuite/test/tools/lldb-vscode/step/TestVSCode_step.py", line 67, in test_step
self.assertEqual(x1, x3, 'verify step out variable')
AssertionError: 2 != 1 : verify step out variable
AFAICT, lldb-vscode is doing the right thing here, and the problem is
that the test is not taking this sequence of events into account. Since
the test is about testing stepping, it does not seem necessary to have
threads in the inferior at all, so I just rewrite the test to execute
the code we're supposed to step through directly on the main thread.
Reviewers: clayborg, jgorbe
Subscribers: jfb, lldb-commits
Differential Revision: https://reviews.llvm.org/D60608
llvm-svn: 358847
When this test fails (flakes) all we get is an error message like "False
is not True". This replaces patterns like assertTrue(a == b) with
assertEqual(a, b), so we get a better error message (and hopefully a
hint as to why the test is flaky).
llvm-svn: 357747
Summary:
After https://reviews.llvm.org/D59828 and https://reviews.llvm.org/D59849,
I believe the problems with these tests hanging have been solved.
I tried enabling all of them on my machine, and got two failures:
- One of them was spawning a child process that lives for 5 seconds, waited
for 5 seconds to attach to the child, and failed because the child wasn't
there.
- The other one was a legit failure because shell expansion of arguments doesn't
work on Linux.
This tests enables all lldb-vscode tests on Linux except for "launch process
with shell expansion of args" (which doesn't work), and fixes the other broken
test by reducing the time it waits before attaching to its child process.
Reviewers: zturner, clayborg
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D60153
llvm-svn: 357633
While reviewing D56233 it became clear to me that this test can be
simplified. There's no need for a start-stop cycle in the inferior -- we
can start fiddling with its registers as soon as it is launched.
llvm-svn: 357451
Summary:
This change prevents the lldb-vscode test harness from hanging up waiting for
new messages when the lldb-vscode subprocess crashes.
Now, when an EOF from the subprocess pipe is detected we enqueue a `None` packet
in the received packets list. Then, during the message processing loop, we can
use this `None` packet to tell apart the case where lldb-vscode has terminated
unexpectedly from the normal situation where no pending messages means blocking
and waiting for more data.
I believe this should be enough to fix the issues with these tests hanging on
multiple platforms. Once this lands, I'll prepare and test a separate change
removing the @skipIfLinux annotations.
Reviewers: clayborg, zturner
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D59849
llvm-svn: 357426
Add a convenience 'expectedFailureNetBSD' decorator and mark all tests
currently failing on NetBSD with it. Also skip a few tests that hang
the test suite. This should establish a baseline for the test suite
and get us closer to enabling tests on buildbot. This will help us
catch regressions while we still have a lot of work to do to get tests
working.
It seems that there are also some flaky tests. I am going to address
them later on.
Differential Revision: https://reviews.llvm.org/D58527
llvm-svn: 355320
encode/decode the data before sending it over the socket. Since (AFAICT)
the vscode protocol (unlike the gdb-remote one) is fully textual, using
the utf8 codec here is appropriate.
llvm-svn: 354308
Summary:
This patch finishes the python3-ification of the lldb-server test suite.
It reverts the partial attempt in r352709 to encode/decode the string
via utf8 before writing to the socket. This wasn't enough because the
gdb-remote protocol can sometimes (but not very often) carry binary
data, and the utf8 codec chokes on that. Instead I add utility functions
to the "seven" module for performing "identity" transformations on the
byte data. This basically drills back the hole in the python type system
that the string/bytes distinction was supposed to plug. That is not
ideal, but was the best solution of the alternatives I could come up
with. The options I considered were:
- make use of the type system to add type safety to the test suite: This
required making a lot of changes to the test suite, since most of the
strings would now become byte objects instead, and it was not even
fully clear to me where to draw the line. One extreme solution would
be to just use byte objects everywhere, as the protocol doesn't
support non-ascii characters anyway. However, this appeared to be:
a) weird, because most of the protocol actually deals with strings,
but we would have to prefix everything with 'b'
b) clunky, because the handling of the bytes objects is sufficiently
different in PY2 and PY3 (e.g. b'a'[0] is a string in PY2, but an
int in PY3).
- using the latin1 codec (which gives an identity transformation for the
first 256 code points of unicode) instead of the custom
bytes_to_string functions. This almost could work, but it was still
slightly different between python 2 and 3, because in PY2 in would
return a unicode object, which would then cause problems when
combined with regular strings if it contained 8-bit chars.
With this in mind, I think the best solution for the time being is to
just coerce everything into the string type as early as possible, and
have things proceed indentically on both python versions. Once we stop
supporting python3, we can revisit the idea of using bytes objects more
prevasively.
Reviewers: davide, zturner, serge-sans-paille
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D58177
llvm-svn: 354106
It looks like I was too hasty to submit the previous patch. It does fix
some tests on python3, but it also breaks one tests with python2.
This happens because the gdb-remote protocol can sometimes (but not very
often) contain binary data, and attempting to parse this as utf8
characters fails.
This reverts commit r353944.
llvm-svn: 353945
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
There is already in use:
lit/lit-lldb-init:
settings set symbols.enable-external-lookup false
packages/Python/lldbsuite/test/lldbtest.py:
self.runCmd('settings set symbols.enable-external-lookup false')
But those are not in effect during MI part of the testsuite. Another problem is
that symbols.enable-external-lookup (read by GetEnableExternalLookup) has been
currently read only by LocateMacOSXFilesUsingDebugSymbols and therefore it had
no effect on Linux.
On Red Hat platforms (Fedoras, RHEL-7) there is DWZ in use and so
MiSyntaxTestCase-test_lldbmi_output_grammar FAILs due to:
AssertionError: error: inconsistent pattern ''^.+?\n'' for state 0x5f
(matched string: warning: (x86_64) /lib64/libstdc++.so.6 unsupported
DW_FORM values: 0x1f20 0x1f21
It is the only testcase with this error. It happens due to:
(lldb) target create "/lib64/libstdc++.so.6"
Current executable set to '/lib64/libstdc++.so.6' (x86_64).
(lldb) b main
warning: (x86_64) /lib64/libstdc++.so.6 unsupported DW_FORM values: 0x1f20 0x1f21
Breakpoint 1: no locations (pending).
WARNING: Unable to resolve breakpoint to any actual locations.
which happens only with gcc-base-debuginfo rpm installed (similarly for other packages).
It should also speed up the testsuite as it no longer needs to read
/usr/lib/debug symbols which have no effect (and should not have any effect) on
the testsuite results.
Differential Revision: https://reviews.llvm.org/D55859
llvm-svn: 350368
Currently spawnLldbMi accepts both lldb-mi options and executable to debug as
a single parameter. Split them.
As in D55859 we will need to execute one lldb-mi command before loading the
exe. Therefore we can no longer use the exe as lldb-mi command-line parameter
as then there is no way to execute a command before loading exe specified as
lldb-mi command-line parameter.
LocateExecutableSymbolFileDsym should be static, that is also a little
refactorization.
Differential Revision: https://reviews.llvm.org/D55858
llvm-svn: 349607
tests when targetting a device. Add an include to
safe-to-call-func to work around a modules issue with
a certain combination of header files. Add rules for
Darwin systems to ad-hoc codesign binaries that the
testsuite builds.
llvm-svn: 344635
Raphael Isemann