This allows targets to make more decisions about reserved registers
after isel. For example, now it should be certain there are calls or
stack objects in the frame or not, which could have been introduced by
legalization.
Patch by Matthias Braun
llvm-svn: 363757
Second functional change following on from rL362687. Pass the
NoWrapFlags from the MulExpr to InsertBinop when we're generating a
shl or mul.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363540
Current findBestLoopTop can find and move one kind of block to top, a latch block has one successor. Another common case is:
* a latch block
* it has two successors, one is loop header, another is exit
* it has more than one predecessors
If it is below one of its predecessors P, only P can fall through to it, all other predecessors need a jump to it, and another conditional jump to loop header. If it is moved before loop header, all its predecessors jump to it, then fall through to loop header. So all its predecessors except P can reduce one taken branch.
Differential Revision: https://reviews.llvm.org/D43256
llvm-svn: 363471
If the given SCEVExpr has no (un)signed flags attached to it, transfer
these to the resulting instruction or use them to find an existing
instruction.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 362687
We use both -long-option and --long-option in tests. Switch to --long-option for consistency.
In the "llvm-readelf" mode, -long-option is discouraged as it conflicts with grouped short options and it is not accepted by GNU readelf.
While updating the tests, change llvm-readobj -s to llvm-readobj -S to reduce confusion ("s" is --section-headers in llvm-readobj but --symbols in llvm-readelf).
llvm-svn: 359649
Summary:
Targets like ARM, MSP430, PPC, and SystemZ have complex behavior when
printing the address of a MachineOperand::MO_GlobalAddress. Move that
handling into a new overriden method in each base class. A virtual
method was added to the base class for handling the generic case.
Refactors a few subclasses to support the target independent %a, %c, and
%n.
The patch also contains small cleanups for AVRAsmPrinter and
SystemZAsmPrinter.
It seems that NVPTXTargetLowering is possibly missing some logic to
transform GlobalAddressSDNodes for
TargetLowering::LowerAsmOperandForConstraint to handle with "i" extended
inline assembly asm constraints.
Fixes:
- https://bugs.llvm.org/show_bug.cgi?id=41402
- https://github.com/ClangBuiltLinux/linux/issues/449
Reviewers: echristo, void
Reviewed By: void
Subscribers: void, craig.topper, jholewinski, dschuff, jyknight, dylanmckay, sdardis, nemanjai, javed.absar, sbc100, jgravelle-google, eraman, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, jrtc27, atanasyan, jsji, llvm-commits, kees, tpimh, nathanchance, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60887
llvm-svn: 359337
Summary:
When refactoring vectorization flags, vectorization was disabled by default in the new pass manager.
This patch re-enables is for both managers, and changes the assumptions opt makes, based on the new defaults.
Comments in opt.cpp should clarify the intended use of all flags to enable/disable vectorization.
Reviewers: chandlerc, jgorbe
Subscribers: jlebar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61091
llvm-svn: 359167
Summary:
The DAGCombiner is rewriting (canonicalizing) an ISD::ADD
with no common bits set in the operands as an ISD::OR node.
This could sometimes result in "missing out" on some
combines that normally are performed for ADD. To be more
specific this could happen if we already have rewritten an
ADD into OR, and later (after legalizations or combines)
we expose patterns that could have been optimized if we
had seen the OR as an ADD (e.g. reassociations based on ADD).
To make the DAG combiner less sensitive to if ADD or OR is
used for these "no common bits set" ADD/OR operations we
now apply most of the ADD combines also to an OR operation,
when value tracking indicates that the operands have no
common bits set.
Reviewers: spatel, RKSimon, craig.topper, kparzysz
Reviewed By: spatel
Subscribers: arsenm, rampitec, lebedev.ri, jvesely, nhaehnle, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59758
llvm-svn: 358965
In some circumstances we can end up with setup costs that are very complex to
compute, even though the scevs are not very complex to create. This can also
lead to setupcosts that are calculated to be exactly -1, which LSR treats as an
invalid cost. This patch puts a limit on the recursion depth for setup cost to
prevent them taking too long.
Thanks to @reames for the report and test case.
Differential Revision: https://reviews.llvm.org/D60944
llvm-svn: 358958
Summary:
None of these derived classes do anything that the base class cannot.
If we remove these case statements, then the base class can handle them
just fine.
Reviewers: peter.smith, echristo
Reviewed By: echristo
Subscribers: nemanjai, javed.absar, eraman, kristof.beyls, hiraditya, kbarton, jsji, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60803
llvm-svn: 358603
The Hexagon Vector Loop Carried Reuse pass was allowing reuse between
two shufflevectors with different masks. The reason is that the masks
are not instruction objects, so the code that checks each operand
just skipped over the operands.
This patch fixes the bug by checking if the operands are the same
when they are not instruction objects. If the objects are not the
same, then the code assumes that reuse cannot occur.
Differential Revision: https://reviews.llvm.org/D60019
llvm-svn: 358292
The isLoopCarriedDep function does not correctly compute loop
carried dependences when the array index offset is negative
or the stride is smallar than the access size.
Patch by Denis Antrushin.
Differential Revision: https://reviews.llvm.org/D60135
llvm-svn: 358233
In some loops, we end up generating loop induction variables that look like:
{(-1 * (zext i16 (%i0 * %i1) to i32))<nsw>,+,1}
As opposed to the simpler:
{(zext i16 (%i0 * %i1) to i32),+,-1}
i.e we count up from -limit to 0, not the simpler counting down from limit to
0. This is because the scores, as LSR calculates them, are the same and the
second is filtered in place of the first. We end up with a redundant SUB from 0
in the code.
This patch tries to make the calculation of the setup cost a little more
thoroughly, recursing into the scev members to better approximate the setup
required. The cost function for comparing LSR costs is:
return std::tie(C1.NumRegs, C1.AddRecCost, C1.NumIVMuls, C1.NumBaseAdds,
C1.ScaleCost, C1.ImmCost, C1.SetupCost) <
std::tie(C2.NumRegs, C2.AddRecCost, C2.NumIVMuls, C2.NumBaseAdds,
C2.ScaleCost, C2.ImmCost, C2.SetupCost);
So this will only alter results if none of the other variables turn out to be
different.
Differential Revision: https://reviews.llvm.org/D58770
llvm-svn: 355597
The trap instruction is intercepted by various runtime environments,
and instead of a crash it creates confusion.
This reapplies r354606 with a fix.
llvm-svn: 354611
This is the most important uaddo problem mentioned in PR31754:
https://bugs.llvm.org/show_bug.cgi?id=31754
...but that was overcome in x86 codegen with D57637.
That patch also corrects the inc vs. add regressions seen with the previous attempt at this.
Still, we want to make this matcher complete, so we can potentially canonicalize the pattern
even if it's an 'add 1' operation.
Pattern matching, however, shouldn't assume that we have canonicalized IR, so we match 4
commuted variants of uaddo.
There's also a test with a crazy type to show that the existing CGP transform based on this
matcher is not limited by target legality checks.
I'm not sure if the Hexagon diff means the test is no longer testing what it intended to
test, but that should be solvable in a follow-up.
Differential Revision: https://reviews.llvm.org/D57516
llvm-svn: 352998
#pragma clang loop pipeline(disable)
Disable SWP optimization for the next loop.
“disable” is the only possible value.
#pragma clang loop pipeline_initiation_interval(number)
Set value of initiation interval for SWP
optimization to specified number value for
the next loop. Number is the positive value
greater than 0.
These pragmas could be used for debugging or reducing
compile time purposes. It is possible to disable SWP for
concrete loops to save compilation time or to find bugs
by not doing SWP to certain loops. It is possible to set
value of initiation interval to concrete number to save
compilation time by not doing extra pipeliner passes or
to check created schedule for specific initiation interval.
That is llvm part of the fix
Clang part of fix: https://reviews.llvm.org/D55710
Patch by Alexey Lapshin!
Differential Revision: https://reviews.llvm.org/D56403
llvm-svn: 351923
compiler identification lines in test-cases.
(Doing so only because it's then easier to search for references which
are actually important and need fixing.)
llvm-svn: 351200
trunc (add X, C ) --> add (trunc X), C'
If we're throwing away the top bits of an 'add' instruction, do it in the narrow destination type.
This makes the truncate-able opcode list identical to the sibling transform done in IR (in instcombine).
This change used to show regressions for x86, but those are gone after D55494.
This gets us closer to deleting the x86 custom function (combineTruncatedArithmetic)
that does almost the same thing.
Differential Revision: https://reviews.llvm.org/D55866
llvm-svn: 350006
The transform performs a bitwise logic op in a wider type followed by
truncate when both inputs are truncated from the same source type:
logic_op (truncate x), (truncate y) --> truncate (logic_op x, y)
There are a bunch of other checks that should prevent doing this when
it might be harmful.
We already do this transform for scalars in this spot. The vector
limitation was shared with a check for the case when the operands are
extended. I'm not sure if that limit is needed either, but that would
be a separate patch.
Differential Revision: https://reviews.llvm.org/D55448
llvm-svn: 349303
Summary:
Sometimes MIR-level passes create DILocations that were not present in the
LLVM-IR. For example, it may merge two DILocations together to produce a
DILocation that points to line 0.
Previously, the address of these DILocations were printed which prevented the
MIR from being read back into LLVM. With this patch, DILocations will use
metadata references where possible and fall back on serializing them inline like so:
MOV32mr %stack.0.x.addr, 1, _, 0, _, %0, debug-location !DILocation(line: 1, scope: !15)
Reviewers: aprantl, vsk, arphaman
Reviewed By: aprantl
Subscribers: probinson, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D55243
llvm-svn: 349035
- Check if an operand is an immediate before calling getImm. Some operands
that take constant values can actually have global symbols or other
constant expressions.
- When a load-constant instruction can be folded into users, make sure to
only delete it when all users have been successfully converted.
llvm-svn: 348802
Eliminate the stack frame in functions with the noreturn nounwind
attributes, and when the noreturn-stack-elim target feature is
enabled. This reduces the code and stack space needed for noreturn
functions.
Differential Revision: https://reviews.llvm.org/D54210
llvm-svn: 346532
Both -fPIC and -G0 disable placement of globals in small data section,
but if a global has an explicit section assigmnent placing it in small
data, it should go there anyway.
llvm-svn: 346523
Small-data (i.e. GP-relative) loads and stores allow 16-bit scaled
offset. For a load of a value of type T, the small-data area is
equivalent to an array "T sdata[65536]". This implies that objects
of smaller sizes need to be closer to the beginning of sdata,
while larger objects may be farther away, or otherwise the offset
may be insufficient to reach it. Similarly, an object of a larger
size should not be accessed via a load of a smaller size.
llvm-svn: 345975
Summary:
This adds dummy implementation of `EmitRawText` in `MCNullStreamer`.
This fixes the behavior of `AsmPrinter` with `MCNullStreamer` on targets
on which no integrated assembler is used. An attempt to emit inline asm
on such a target would previously lead to a crash, since `AsmPrinter` does not
check for `hasRawTextSupport` in `EmitInlineAsm` and calls `EmitRawText`
anyway if integrated assembler is disabled (the behavior has changed
in D2686).
Error message printed by MCStreamer:
> EmitRawText called on an MCStreamer that doesn't support it, something
> must not be fully mc'ized
Patch by Eugene Sharygin
Reviewers: dsanders, echristo
Reviewed By: dsanders
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D53938
llvm-svn: 345841
Krzysztof Parzyszek