- introduce new variable ARCHFLAG in make/Makefile.rules to switch between "-arch" on Mac and "-m" everywhere else
- update testcase makefiles to use LD_EXTRAS instead of LDFLAGS (the former interacts with Makefile.rules badly)
- special treatment for gcc 4.6: replace "-std=c++11" with "-std=c++0x" as the former is not handled correctly
- remove hardcoded "-arch" from test Makefile
This patch should not have any effect on lldb on Mac OS X.
llvm-svn: 173402
Cleaned up the option parsing code to always pass around the short options as integers. Previously we cast this down to "char" and lost some information. I recently added an assert that would detect duplicate short character options which was firing during the test suite.
This fix does the following:
- make sure all short options are treated as "int"
- make sure that short options can be non-printable values when a short option is not required or when an option group is mixed into many commands and a short option is not desired
- fix the help printing to "do the right thing" in all cases. Previously if there were duplicate short character options, it would just not emit help for the duplicates
- fix option parsing when there are duplicates to parse options correctly. Previously the option parsing, when done for an OptionGroup, would just start parsing options incorrectly by omitting table entries and it would end up setting the wrong option value
llvm-svn: 169189
it to print the old and new values.
Temporarily disable the "out of scope" checking since it didn't work correctly, and was
not what people generally expected watchpoints to be doing.
llvm-svn: 166472
Previously we put a WatchpointSentry object within StopInfo.cpp to disable-and-then-enable the watchpoint itself
while we are performing the actions associated with the triggered watchpoint, which can cause the user-initiated
watchpoint disabling action to be negated.
Add a test case to verify that a watchpoint can be disabled during the callbacks.
llvm-svn: 162483
- no setting auto completion
- very manual and error prone way of getting/setting variables
- tons of code duplication
- useless instance names for processes, threads
Now settings can easily be defined like option values. The new settings makes use of the "OptionValue" classes so we can re-use the option value code that we use to set settings in command options. No more instances, just "does the right thing".
llvm-svn: 162366
do not take the sanpshot and forget about the stop info. It is possible that the variable expression has gone
out of scope, we'll revise the hit count due to the false alarms.
llvm-svn: 161892
Record the snapshot of our watched value when the watchpoint is set or hit.
And report the old/new values when watchpoint is triggered. Add some test scenarios.
llvm-svn: 161785
Fix confusing error message about "expression did not evaluate to an address" when doing 'watchpoint set expression".
Instead of using 0 as the fail_value when invoking ValueObject::GetValueAsUnsigned(), modify the API to take an addition
bool pointer (defaults to NULL) to indicate success/failure of value conversion.
llvm-svn: 158016
Add default Process::GetWatchpointSupportInfo() impl which returns an error of "not supported".
Add "qWatchpointSupportInfo" packet to the gdb communication layer to support this, and modify TestWatchpointCommands.py to test it.
llvm-svn: 157345
we delete the watchpoint. The test succeeds when no more watchpoint hit event fires after the deletion of the watchpoint.
related to rdar://problem/11320188
llvm-svn: 157084
either @dsym_test or @dwarf_test to be executed during the testsuite run. There are still lots of
Test*.py files which have not been decorated with the new decorator.
An example:
# From TestMyFirstWatchpoint.py ->
class HelloWatchpointTestCase(TestBase):
mydir = os.path.join("functionalities", "watchpoint", "hello_watchpoint")
@dsym_test
def test_hello_watchpoint_with_dsym_using_watchpoint_set(self):
"""Test a simple sequence of watchpoint creation and watchpoint hit."""
self.buildDsym(dictionary=self.d)
self.setTearDownCleanup(dictionary=self.d)
self.hello_watchpoint()
@dwarf_test
def test_hello_watchpoint_with_dwarf_using_watchpoint_set(self):
"""Test a simple sequence of watchpoint creation and watchpoint hit."""
self.buildDwarf(dictionary=self.d)
self.setTearDownCleanup(dictionary=self.d)
self.hello_watchpoint()
# Invocation ->
[17:50:14] johnny:/Volumes/data/lldb/svn/ToT/test $ ./dotest.py -N dsym -v -p TestMyFirstWatchpoint.py
LLDB build dir: /Volumes/data/lldb/svn/ToT/build/Debug
LLDB-137
Path: /Volumes/data/lldb/svn/ToT
URL: https://johnny@llvm.org/svn/llvm-project/lldb/trunk
Repository Root: https://johnny@llvm.org/svn/llvm-project
Repository UUID: 91177308-0d34-0410-b5e6-96231b3b80d8
Revision: 154133
Node Kind: directory
Schedule: normal
Last Changed Author: gclayton
Last Changed Rev: 154109
Last Changed Date: 2012-04-05 10:43:02 -0700 (Thu, 05 Apr 2012)
Session logs for test failures/errors/unexpected successes will go into directory '2012-04-05-17_50_49'
Command invoked: python ./dotest.py -N dsym -v -p TestMyFirstWatchpoint.py
compilers=['clang']
Configuration: arch=x86_64 compiler=clang
----------------------------------------------------------------------
Collected 2 tests
1: test_hello_watchpoint_with_dsym_using_watchpoint_set (TestMyFirstWatchpoint.HelloWatchpointTestCase)
Test a simple sequence of watchpoint creation and watchpoint hit. ... skipped 'dsym tests'
2: test_hello_watchpoint_with_dwarf_using_watchpoint_set (TestMyFirstWatchpoint.HelloWatchpointTestCase)
Test a simple sequence of watchpoint creation and watchpoint hit. ... ok
----------------------------------------------------------------------
Ran 2 tests in 1.138s
OK (skipped=1)
Session logs for test failures/errors/unexpected successes can be found in directory '2012-04-05-17_50_49'
[17:50:50] johnny:/Volumes/data/lldb/svn/ToT/test $
llvm-svn: 154154
with subcommand 'expression' and 'variable'. The first subcommand is for supplying an expression to
be evaluated into an address to watch for, while the second is for watching a variable.
'watchpoint set expression' is a raw command, which means that you need to use the "--" option terminator
to end the '-w' or '-x' option processing and to start typing your expression.
Also update several test cases to comply and add a couple of test cases into TestCompletion.py,
in particular, test that 'watchpoint set ex' completes to 'watchpoint set expression ' and that
'watchpoint set var' completes to 'watchpoint set variable '.
llvm-svn: 150109
the '-e' option (for watching of an address) to be present.
Update some existing test cases with the required option and add some more test cases.
Since the '-v' option takes <variable-name> and the '-e' option takes <expr> as the command arg,
the existing infrastructure for generating the option usage can produce confusing help message,
like:
watchpoint set -e [-w <watch-type>] [-x <byte-size>] <variable-name | expr>
watchpoint set -v [-w <watch-type>] [-x <byte-size>] <variable-name | expr>
The solution adopted is to provide an extra member field to the struct CommandArgumentData called
(uint32_t)arg_opt_set_association, whose purpose is to link this particular argument data with some
option set(s). Also modify the signature of CommandObject::GetFormattedCommandArguments() to:
GetFormattedCommandArguments (Stream &str, uint32_t opt_set_mask = LLDB_OPT_SET_ALL)
it now takes an additional opt_set_mask which can be used to generate a filtered formatted command
args for help message.
Options::GenerateOptionUsage() impl is modified to call the GetFormattedCommandArguments() appropriately.
So that the help message now looks like:
watchpoint set -e [-w <watch-type>] [-x <byte-size>] <expr>
watchpoint set -v [-w <watch-type>] [-x <byte-size>] <variable-name>
rdar://problem/10703256
llvm-svn: 150032
Also add test cases for watching a variable as well as a location expressed as an expression.
o TestMyFirstWatchpoint.py:
Modified to test "watchpoint set -w write global".
o TestWatchLocationWithWatchSet.py:
Added to test "watchpoint set -w write -x 1 g_char_ptr + 7" where a contrived example program
with several threads is supposed to only access the array index within the range [0..6], but
there's some misbehaving thread writing past the range.
rdar://problem/10701761
llvm-svn: 149280
watchpoint modify -c 'global==5'
modifies the last created watchpoint so that the condition expression
is evaluated at the stop point to decide whether we should proceed with
the stopping.
Also add SBWatchpont::SetCondition(const char *condition) to set condition
programmatically.
Test cases to come later.
llvm-svn: 142227
Add a keyword argument 'endstr' to TestBase.expect() method to assert that the output
will end with 'endstr'.
Add TestBase.switch_to_thread_with_stop_reason(stop_reason) to select the thread with
the stop reason = 'stop_reason' as the current thread.
o TestWatchLocation.py:
Modified to switch to the stopped thread with stop reason = watchpoint and to evaluate
an expression with expected output for stronger assertion.
llvm-svn: 140890
the watchpoint state is changed, not only does the change propagate to all the thread instances,
it also updates a global debug state, if chosen by the DNBArchProtocol derivative.
Once implemented, the DNBArchProtocol derivative, also makes sure that when new thread comes along,
it tries to inherit from the global debug state, if it is valid.
Modify TestWatchpointMultipleThreads.py to test this functionality.
llvm-svn: 140811
it enables the hardware watchpoint for all existing threads. Add a test file for that.
Also fix MachThreadList::DisableHardwareWatchpoint().
llvm-svn: 140757
Modify CommandObjectFrame.cpp to populate this field when creating a watchpoint location.
Update the test case to verify that the declaration info matches the file and line number.
llvm-svn: 139946
Daniel Malea