r223113 added support for ARM modified immediate assembly syntax. That patch
has broken support for immediate expressions, as in:
add r0, #(4 * 4)
It wasn't caught because we don't have any tests for this feature. This patch
fixes this regression and adds test cases.
llvm-svn: 223366
The current DAG combine turns a sequence of extracts from <4 x i32> followed by zexts into a store followed by scalar loads.
According to measurements by Martin Krastev (see PR 21269) for x86-64, a sequence of an extract, movs and shifts gives better performance. However, for 32-bit x86, the previous sequence still seems better.
Differential Revision: http://reviews.llvm.org/D6501
llvm-svn: 223360
To find an AtomLayout object for the given symbol I replace the
`Layout::findAtomAddrByName` method by `Layout::findAtomLayoutByName` method.
llvm-svn: 223359
Replaced some logic that checked if a build_vector node is doing a splat of a
non-undef value with a call to method BuildVectorSDNode::getSplatValue().
No functional change intended.
llvm-svn: 223354
It was observed that we dont need to set stdin to unbuffered and setting console
to non-canonical mode.
Patch originally came from "Ilia K <ki.stfu@gmail.com>"
llvm-svn: 223353
--disable-timestamps was added to the configure command way back in r142647 but
the command that echos this command to the log was not updated at the time.
llvm-svn: 223351
According to a previous FIXME comment we now not only look at MBB
successors, but also handle code sinking past them:
x = computation
if () {} else {}
use x
The instruction could be sunk over the whole diamond for the
if/then/else (or loop, etc), allowing it to be sunk into other blocks
after that.
Modified test added in r204522, due to one spill less present.
Minor fixes in comments.
Patch provided by Jonas Paulsson. Reviewed by Hal Finkel.
llvm-svn: 223350
Added instcombine optimizations for BSWAP with AND/OR/XOR ops:
OP( BSWAP(x), BSWAP(y) ) -> BSWAP( OP(x, y) )
OP( BSWAP(x), CONSTANT ) -> BSWAP( OP(x, BSWAP(CONSTANT) ) )
Since its just a one liner, I've also added BSWAP to the DAGCombiner equivalent as well:
fold (OP (bswap x), (bswap y)) -> (bswap (OP x, y))
Refactored bswap-fold tests to use FileCheck instead of just checking that the bswaps had gone.
Differential Revision: http://reviews.llvm.org/D6407
llvm-svn: 223349
I'm recommiting the codegen part of the patch.
The vectorizer part will be send to review again.
Masked Vector Load and Store Intrinsics.
Introduced new target-independent intrinsics in order to support masked vector loads and stores. The loop vectorizer optimizes loops containing conditional memory accesses by generating these intrinsics for existing targets AVX2 and AVX-512. The vectorizer asks the target about availability of masked vector loads and stores.
Added SDNodes for masked operations and lowering patterns for X86 code generator.
Examples:
<16 x i32> @llvm.masked.load.v16i32(i8* %addr, <16 x i32> %passthru, i32 4 /* align */, <16 x i1> %mask)
declare void @llvm.masked.store.v8f64(i8* %addr, <8 x double> %value, i32 4, <8 x i1> %mask)
Scalarizer for other targets (not AVX2/AVX-512) will be done in a separate patch.
http://reviews.llvm.org/D6191
llvm-svn: 223348
Based on review comments from Richard Smith, restrict this optimization from
applying to globals that might resolve lazily to other dynamically-loaded
modules, and also from dynamic allocas (which might be transformed into malloc
calls). In short, take extra care that the compared-to pointer is really
simultaneously live with the memory allocation.
llvm-svn: 223347
Summary: Add rpath load command support in Mach-O object and update llvm-objdump to use it.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6512
llvm-svn: 223343
Looks like the rule of /export is more complicated than
I was thinking. If /export:foo, for example, is given, and
if the actual symbol name in an object file is _foo@<number>,
we need to export that symbol as foo, not as the mangled name.
If only /export:_foo@<number> is given, the symbol is exported
as _foo@<number>.
If both /export:foo and /export:_foo@<number> are given,
they are considered as duplicates, and the linker needs to
choose the unmangled name.
The basic idea seems that the linker needs to export a symbol
with the same name as given as /export.
We exported mangled symbols. This patch fixes that issue.
llvm-svn: 223341
http://llvm.org/bugs/show_bug.cgi?id=21555
Currently, kernel argument metadata is omitted unless the
"-cl-kernel-arg-info" option is specified. But the SPIR 1.2 spec
requires that all metadata except kernel_arg_name should always be
emitted, and kernel_arg_name is only emitted when
"-cl-kernel-arg-info" is specified.
Patch ported by Ryan Burn from the Khronos SPIR generator.
https://github.com/KhronosGroup/SPIR
llvm-svn: 223340
Create a helper function to construct a value for the ARM hint intrinsic
rather than inling the construction. In order to avoid the use of the sentinel
value, inline the use of intrinsic instruction retrieval. NFC.
llvm-svn: 223338
The regex should not accept an empty version number.
The previous attempt at r223106 failed, and the build was still erroring:
CMake Error at tools/clang/CMakeLists.txt:269 (string):
string sub-command REGEX, mode REPLACE regex "[^0-9]*([0-9.]*).*" matched
an empty string.
llvm-svn: 223333
The aim of this patch is to reduce the excessive abstraction from
the InputGraph. We found that even a simple thing, such as sorting
input files (Mach-O) or adding a new file to the input file list
(PE/COFF), is nearly impossible with the InputGraph abstraction,
because it hides too much information behind it. As a result,
we invented complex interactions between components (e.g.
notifyProgress() mechanism) and tricky code to work around that
limitation. There were many occasions that we needed to write
awkward code.
This patch is a first step to make it cleaner. As a first step,
this removes Group class from the InputGraph. The grouping feature
is now directly handled by the Resolver. notifyProgress is removed
since we no longer need that. I could have cleaned it up even more,
but in order to keep the patch minimum, I focused on Group.
SimpleFileNode class, a container of File objects, is now limited
to have only one File. We shold have done this earlier.
We used to allow putting multiple File objects to FileNode.
Although SimpleFileNode usually has only one file, the Driver class
actually used that capability. I modified the Driver class a bit,
so that one FileNode is created for each input File.
We should now probably remove SimpleFileNode and directly store
File objects to the InputGraph in some way, because a container
that can contain only one object is useless. This is a TODO.
Mach-O input files are now sorted before they are passe to the
Resolver. DarwinInputGraph class is no longer needed, so removed.
PECOFF still has hacky code to add a new file to the input file list.
This will be cleaned up in another patch.
llvm-svn: 223330
Commit on
- This patch fixes the bug described in
http://lists.cs.uiuc.edu/pipermail/llvmdev/2013-May/062343.html
The fix allocates an extra slot just below the GPRs and stores the base pointer
there. This is done only for functions containing llvm.eh.sjlj.setjmp that also
need a base pointer. Because code containing llvm.eh.sjlj.setjmp saves all of
the callee-save GPRs in the prologue, the offset to the extra slot can be
computed before prologue generation runs.
Impact at run-time on affected functions is::
- One extra store in the prologue, The store saves the base pointer.
- One extra load after a llvm.eh.sjlj.setjmp. The load restores the base pointer.
Because the extra slot is just above a gap between frame-pointer-relative and
base-pointer-relative chunks of memory, there is no impact on other offset
calculations other than ensuring there is room for the extra slot.
http://reviews.llvm.org/D6388
Patch by Arch Robison <arch.robison@intel.com>
llvm-svn: 223329
We had mistakenly believed that GCC's 'cc' referred to the entire
condition-code register (cr0 through cr7) -- and implemented this in r205630 to
fix PR19326, but 'cc' is actually an alias only to 'cr0'. This is causing LLVM
to clobber too much with legacy code with inline asm using the 'cc' clobber.
Fixes PR21451.
llvm-svn: 223328
Use the MCAsmInfo instead of the DataLayout, and allow
specifying a custom prefix for labels specifically. HSAIL
requires that labels begin with @, but global symbols with &.
llvm-svn: 223323
This is simply a grab bag of unrelated checks:
- A statepoint call can't be marked readonly or readnone
- We don't currently support inline asm or varadic target functions. Both could be supported, but don't currently work.
- I forgot to check that the number of call arguments actually matched the wrapped callee in my previous change. Included here.
llvm-svn: 223322
On PowerPC, inline asm memory operands might be expanded as 0($r), where $r is
a register containing the address. As a result, this register cannot be r0, and
we need to enforce this register subclass constraint to prevent miscompiling
the code (we'd get this constraint for free with the usual instruction
definitions, but that scheme has no knowledge of how we end up printing inline
asm memory operands, and so here we need to do it 'by hand'). We can accomplish
this within the current address-mode selection framework by introducing an
explicit COPY_TO_REGCLASS node.
Fixes PR21443.
llvm-svn: 223318
Prior to this commit, physical registers defined implicitly were considered free
right after their definition, i.e.. like dead definitions. Therefore, their uses
had to immediately follow their definitions, otherwise the related register may
be reused to allocate a virtual register.
This commit fixes this assumption by keeping implicit definitions alive until
they are actually used. The downside is that if the implicit definition was dead
(and not marked at such), we block an otherwise available register. This is
however conservatively correct and makes the fast register allocator much more
robust in particular regarding the scheduling of the instructions.
Fixes PR21700.
llvm-svn: 223317
Rafael Espindola