Summary:
As per the discussion on LLVM-dev this patch proposes removing LLVM_ENABLE_TIMESTAMPS.
The only complicated bit of this patch is the Windows support. On windows we used to log an error if /INCREMENTAL was passed to the linker when timestamps were disabled.
With this change since timestamps in code are always disabled we will always compile on windows with /Brepro unless /INCREMENTAL is specified, and we will log a warning when /INCREMENTAL is specified to notify the user that the build will be non-deterministic.
See: http://lists.llvm.org/pipermail/llvm-dev/2016-May/098990.html
Reviewers: bogner, silvas, rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19892
llvm-svn: 268670
This backend was supposed to generate C++ code which will re-construct
the LLVM IR passed as input. This seems to me to have very marginal
usefulness in the first place.
However, the code has never been updated to use IRBuilder, which makes
its current value negative -- people who look at the output may be
steered to use the *wrong* C++ APIs to construct IR.
Furthermore, it's generated code that doesn't compile since at least
2013.
Differential Revision: http://reviews.llvm.org/D19942
llvm-svn: 268631
Summary:
Before this change certain Polly variables have been used both as user-facing
CACHED cmake variables as well as uncached internal variables. Even though
this seems to have worked OK in practice, the behavior only worked due to
one variable shadowing the other. This behavior has been found confusing.
To make the use of cmake variables more clear we now prefix the cached, user
facing variables with LLVM_ as it is common habit for LLVM options and also
moved the _POLLY_ term to the beginning to ensure related options are sorted
after each other. The variables that control the behavior of LLVM/Polly are then
set by forwarding the values set in the user facing option variables.
As a result, Polly is now enabled with LLVM_POLLY_BUILD instead of BUILD_POLLY
and the linking behavior of Polly is controlled with LLVM_POLLY_LINK_INTO_TOOLS
instead of LINK_POLLY_INTO_TOOLS.
Reviewers: bogner, Meinersbur
Subscribers: pollydev, llvm-commits
Differential Revision: http://reviews.llvm.org/D19907
llvm-svn: 268537
Summary:
Historically, we had a switch in the Makefiles for turning on "expensive
checks". This has never been ported to the cmake build, but the
(dead-ish) code is still around.
This will also make it easier to turn it on in buildbots.
Reviewers: chandlerc
Subscribers: jyknight, mzolotukhin, RKSimon, gberry, llvm-commits
Differential Revision: http://reviews.llvm.org/D19723
llvm-svn: 268050
This is the second try. This time we disable this feature if no Polly checkout
is available. For this to work we need to check if tools/polly is present
early enough that our decision is known before cmake generates Config/config.h.
With Polly checked into LLVM it was since a long time possible to compile
clang/opt/bugpoint with Polly support directly linked in, instead of only
providing Polly as a separate loadable module. This commit switches the
default from providing Polly as a module to linking Polly into tools, such
that it becomes unnecessary to load the Polly module when playing with Polly.
Such configuration has shown a lot more convenient for day-to-day Polly use.
This change does not impact the default behavior of any tool, if Polly is not
explicitly enabled when calling clang/opt/bugpoint Polly does not affect
compilation.
This change also does not impact normal LLVM/clang checkouts that do not
contain Polly.
Reviewers: jdoerfert, Meinersbur
Subscribers: pollydev, llvm-commits
Differential Revision: http://reviews.llvm.org/D19711
llvm-svn: 268048
With Polly checked into LLVM it was since a long time possible to compile
clang/opt/bugpoint with Polly support directly linked in, instead of only
providing Polly as a separate loadable module. This commit switches the
default from providing Polly as a module to linking Polly into tools, such
that it becomes unnecessary to load the Polly module when playing with Polly.
Such configuration has shown a lot more convenient for day-to-day Polly use.
This change does not impact the default behavior of any tool, if Polly is not
explicitly enabled when calling clang/opt/bugpoint Polly does not affect
compilation.
This change also does not impact normal LLVM/clang checkouts that do not
contain Polly.
Reviewers: jdoerfert, Meinersbur, sebpop, etherzhhb, zinob, hiraditya
Subscribers: pollydev, llvm-commits
Differential Revision: http://reviews.llvm.org/D19711
llvm-svn: 268033
Summary: Using libtool instead of ar and ranlib on Darwin shaves a minute off my clang build. This is because on Darwin libtool is optimized to give hints to the kernel about filesystem interactions that allow it to be faster.
Reviewers: bogner, pete
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19611
llvm-svn: 267930
If anybody is actually using this, it probably doesn't do what they
think it does. This actually causes the dylib to *export* a
__cxa_atexit symbol, so anything that links it probably loses their
exit time destructors as well as disabling LLVM's.
This just removes the option entirely. If somebody does need this
behaviour we should figure out a more principled way to do it.
This is effectively a revert of r223805.
llvm-svn: 263498
This allows a user to specify "Native" as a target when configuring LLVM. Native will resolve to the LLVM_NATIVE_ARCH, which is the target that supports code generation for the host.
llvm-svn: 262070
The idea here is to provide a customizable install target that only depends on building the things you actually want to install. It relies on each component being installed having an auto-generated install-${component}, which in turn depends only on the target being installed.
This is fundamentally a workaround for the fact that CMake generates build files which have their "install" target depend on the "all" target. This results in "ninja install" building a bunch of unneeded things.
llvm-svn: 261681
This patch adds the necessary plumbing to cmake to build the sources related to
GlobalISel.
To build the sources related to GlobalISel, we need to add -DBUILD_GLOBAL_ISEL=ON.
By default, this is OFF, thus GlobalISel sources will not impact people that do
not explicitly opt-in.
Differential Revision: http://reviews.llvm.org/D15983
llvm-svn: 258344
This reverts r257221.
This caused several build bot failures
* It looks like some of the tests don't work correctly under Windows
* It looks like the lit per test timeout tests fail
So I'm reverting for now. Once the above failures are fixed running
lit's tests can be enabled again.
llvm-svn: 257268
directy with ``make check-lit`` and are run as part of
``make check-all``.
In principle we should run lit's testsuite before testing LLVM using lit
so that any problems with lit get discovered before testing LLVM so we
can bail out early. However this implementation (``check-all`` runs all
tests together) seemed simpler and will still report failing lit tests.
Note that the tests and the configured ``lit.site.cfg`` have to be
copied into the build directory to avoid polluting the source tree.
llvm-svn: 257221
This generates a compile_commands.json file, which tells tools like
YouCompleteMe and clang_complete exactly how to build each source file.
Patch by Justin Lebar!
llvm-svn: 255789
Summary: This adds support for generating dSYM files and stripping debug info from executables and dylibs. It also supports passing -object_path_lto to the linker to generate dSYMs for LTO builds.
Reviewers: bogner, friss
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D15133
llvm-svn: 254627
Summary:
This patch adds a new CMake module for working with ExternalProjects. This wrapper for ExternalProject supports using just-built tools and can hook up dependencies properly so that projects get cleared out.
The example usage here is for the llvm test-suite. In this example, the test-suite is setup as dependent on clang and lld if they are in-tree. If the clang or lld binaries change the test-suite is re-configured, cleaned, and rebuilt.
This cleanup and abstraction wrapping ExternalProject can be extended and applied to other runtime libraries like compiler-rt and libcxx.
Reviewers: samsonov, jroelofs, rengolin, jmolloy
Subscribers: jmolloy, llvm-commits
Differential Revision: http://reviews.llvm.org/D14513
llvm-svn: 252747
Summary:
We've had a lot of discussion in the past about the meaningful and useful default behaviors for the llvm-shlib tool. The original implementation was heavily geared toward Apple's use, and I think that was wrong. This patch seeks to correct that.
I've removed the LLVM_DYLIB_EXPORT_ALL variable and made libLLVM export everything by default.
I've also added a new target that is only built on Darwin for libLLVM-C as a library that re-exports the LLVM-C API. This library is not built on Linux because ELF doesn't support re-export libraries in the same way MachO does.
Reviewers: chapuni, resistor, bogner, axw
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13842
llvm-svn: 251411
This is because if you set one of the variables to 0, if(NOT ...) is true, which isn't what you actually want. Should have thought that through better the first time.
llvm-svn: 250841
CMake's set command overwrites existing values. Package maintainers may want or need to set the version variables manually, so we need to only set them if they are not already defined. Note I use the "if(NOT DEFINED ...)" syntax deliberately in the last case because empty string is a valid value for the suffx, but not the other variables.
llvm-svn: 250333
CMake 3.0 introduced the VERSION option for the project() command. If you don't specify the VERSION in the function it will clear out variables matching ${PROJECT_NAME}_VERSION_${MAJOR|MINOR|PATCH|TWEAK}.
This makes overriding LLVM_VERSION_* not work properly with newer versions of CMake. To make this work properly we need to:
(1) Optionally set the policy to NEW
(2) Move default versions and setting PACKAGE_VERSION to before the call to project()
(3) If the policy is set, pass the VERSION and LANGUAGES options in the new format
This change should have no behavioral change for CMake versions before 3.0, and it makes the behavior of later versions match the earlier versions.
llvm-svn: 250275
CMake.
The Go bindings tests in an unoptimized build take over 30 seconds for
me, making it the slowest test in 'check-llvm' by a factor of two.
I've only rigged this up fully to the CMake build. If someone is
interested in rigging it up to the autoconf build, they're welcome to do
so.
llvm-svn: 247243
Summary:
Cross-compilation uses recursive cmake invocations to build native host
tools. These recursive invocations only forward a fixed set of
variables/options, since the native environment is generally the default.
This change adds -DLLVM_TARGET_IS_CROSSCOMPILE_HOST=TRUE to the recursive
cmake invocations, so that cmake files can distinguish these recursive
invocations from top-level ones, which can explain why expected options
are unset.
LLILC will use this to avoid trying to generate its build rules in the
crosscompile native host target (where it is not needed), which would fail
if attempted because LLILC requires a cmake variable passed on the command
line, which is not forwarded in the recursive invocation.
Reviewers: rnk, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12679
llvm-svn: 247151
Summary:
This diff attempts to address the concerns raised in
http://reviews.llvm.org/D12488.
We introduce a new USE_SHARED option to llvm_config,
which, if set, causes the target to be linked against
libLLVM.
add_llvm_utility now uniformly disables linking against
libLLVM. These utilities are not intended for distribution,
and this keeps the option handling more centralised.
llvm-shlib is now processes before any other "tools"
subdirectories, ensuring the libLLVM target is defined
before its dependents.
One main difference from what was requested: llvm_config
does not prune LLVM_DYLIB_COMPONENTS from the components
passed into explicit_llvm_config. This is because the "all"
component does something special, adding additional
libraries (namely libLTO). Adding the component libraries
after libLLVM should not be a problem, as symbols will be
resolved in libLLVM first.
Finally, I'm not really happy with the
DISABLE_LLVM_LINK_LLVM option, but I'm not sure of a
better way to get the following:
- link all tools and shared libraries to libLLVM if
LLVM_LINK_LLVM_DYLIB is set
- some way of explicitly *not* doing so for utilities
and libLLVM itself
Suggestions for improvement here are particularly welcome.
Reviewers: beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12590
llvm-svn: 246918
Summary:
Three closely related changes, to have a mode in which we link all
executables and shared libraries against libLLVM.
1. Add a new LLVM_LINK_LLVM_DYLIB cmake option, which, when ON, will link
executables and shared libraries against libLLVM. For this to work, it
is necessary to also set LLVM_BUILD_LLVM_DYLIB and LLVM_DYLIB_EXPORT_ALL.
It is not strictly necessary to set LLVM_DISABLE_LLVM_DYLIB_ATEXIT, but
we also default to OFF in this mode, or tools tend to misbehave (e.g.
stdout may not flush on exit when output is buffered.)
llvm-config and Tablegen do not use libLLVM, as they are dependencies of
libLLVM.
2. Modify llvm-go to take a new flag, "linkmode=component-libs|dylib".
Depending on which one is passed (default is component-libs), we link
with the individual libraries or libLLVM respectively. We pass in dylib
when LLVM_LINK_LLVM_DYLIB is ON.
3. Fix LLVM_DYLIB_EXPORT_ALL on Linux, and expand the symbols exported to
actually export all. Don't strip leading underscore from symbols on Linux,
and make sure we get all exported symbols and weak-with-default symbols
("W" in nm output). Without these changes, passes won't load because
the "Annotate..." symbols defined in lib/Support/Valigrind.cpp are not
found.
Testing:
- Ran default build ("ninja") with LLVM, clang, compiler-rt, llgo, lldb.
- Ran "check", "check-clang", "check-tsan", "check-libgo" targets. I've
never had much success with LLDB tests, and llgoi is currently broken
so check-llgo fails for an unrelated reason.
- Ran "lldb" to ensure it loads.
Reviewers: chandlerc, beanz, pcc, rnk
Subscribers: rnk, chapuni, sylvestre.ledru, llvm-commits
Differential Revision: http://reviews.llvm.org/D12488
llvm-svn: 246527
Only disable the progress bar when we're generating VS project files,
like we do for XCode. This makes lit use the simple, non-curses progress
bar that looks like this with:
Testing: 0 .. 10.. 20.. 30.. 40.. 50.. 60.. 70.. 80.. 90..
Testing Time: 5.87s
llvm-svn: 244674
Apparently if you make a typo in the argument to CMAKE_BUILD_TYPE,
cmake silently accepts this but doesn't apply any particular build
type to your build. This means you get a build that doesn't really
make any sense - it's sort of a debug build with asserts disabled.
Error out instead.
llvm-svn: 244406
This allows asm files and Cxx files to be compiled with different flags
rather than treating them identically. LLVM itself has no asm files
other than tests, but this setting is inherited by the compiler-rt
project (unless compiled standalone), which does have asm files.
Differential Revision: http://reviews.llvm.org/D10707
llvm-svn: 243419
Chris Bieneman