This revision adds a new `printNewline` hook to OpAsmPrinter that allows for printing a newline within the custom format of an operation, that is then indented to the start of the operation. Support for the declarative assembly format is also added, in the form of a `\n` literal.
Differential Revision: https://reviews.llvm.org/D93151
When printing verification errors for ops with the incorrect number of
operand segments, print the required number as well as the actual
number. Split off from D93005.
Differential Revision: https://reviews.llvm.org/D93145
The check for formatting enum attributes was missing a call to get the base attribute, which is necessary to strip off the top-level OptionalAttr<> wrapper.
Differential Revision: https://reviews.llvm.org/D92713
- Instead of hardcoding the parameters and return types of 'inferReturnTypes', use the
InferTypeOpInterface trait to generate the method declaration.
- Fix InferTypeOfInterface to use fully qualified type for inferReturnTypes results.
Differential Revision: https://reviews.llvm.org/D92585
Given that OpState already implicit converts to Operator*, this seems reasonable.
The alternative would be to add more functions to OpState which forward to Operation.
Reviewed By: rriddle, ftynse
Differential Revision: https://reviews.llvm.org/D92266
- Change InferTypeOpInterface::inferResultTypes to use fully qualified types matching
the ones generated by genTypeInterfaceMethods, so the redundancy can be detected.
- Move genTypeInterfaceMethods() before genOpInterfaceMethods() so that the
inferResultTypes method generated by genTypeInterfaceMethods() takes precedence
over the declaration that might be generated by genOpInterfaceMethods()
- Modified an op in the test dialect to exercise this (the modified op would fail to
generate valid C++ code due to duplicate inferResultTypes methods).
Differential Revision: https://reviews.llvm.org/D92414
Use the correct interface base type name when generating attribute interfaces
with TabeGen.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D92023
Attributes represent additional data about an operation and are intended to be
modifiable during the lifetime of the operation. In the dialect-specific Python
bindings, attributes are exposed as properties on the operation class. Allow
for assigning values to these properties. Also support creating new and
deleting existing attributes through the generic "attributes" property of an
operation. Any validity checking must be performed by the op verifier after the
mutation, similarly to C++. Operations are not invalidated in the process: no
dangling pointers can be created as all attributes are owned by the context and
will remain live even if they are not used in any operation.
Introduce a Python Test dialect by analogy with the Test dialect and to avoid
polluting the latter with Python-specific constructs. Use this dialect to
implement a test for the attribute access and mutation API.
Reviewed By: stellaraccident, mehdi_amini
Differential Revision: https://reviews.llvm.org/D91652
- Fixes bug 48242 point 3 crash.
- Makes the improvments from points 1 & 2.
https://bugs.llvm.org/show_bug.cgi?id=48262
```
def RTLValueType : Type<CPred<"isRTLValueType($_self)">, "Type"> {
string cppType = "::mlir::Type";
}
```
Works now, but merely by happenstance. Parameters expects a `TypeParameter` class def or a string representing a c++ type but doesn't enforce it.
Reviewed By: lattner
Differential Revision: https://reviews.llvm.org/D91939
For intrinsics with multiple returns where one or more operands are overloaded, the overloaded type is inferred from the corresponding field of the resulting struct, instead of accessing the result directly.
As such, the hasResult parameter of LLVM_IntrOpBase (and derived classes) is replaced with numResults. TableGen for intrinsics also updated to populate this field with the total number of results.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D91680
This allows for operations that exclusively affect symbol operations to better describe their side effects.
Differential Revision: https://reviews.llvm.org/D91581
This utility function is helpful for dialect-specific builders that need
to access the context through location, and the location itself may be
either provided as an argument or expected to be recovered from the
implicit location stack.
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D91623
It may be necessary for interface methods to process or return variables with
the interface class type, in particular for attribute and type interfaces that
can return modified attributes and types that implement the same interface.
However, the code generated by ODS in this case would not compile because the
signature (and the body if provided) appear in the definition of the Model
class and before the interface class, which derives from the Model. Change the ODS
interface method generator to emit only method declarations in the Model class
itself, and emit method definitions after the interface class. Mark as "inline"
since their definitions are still emitted in the header and are no longer
implicitly inline. Add a forward declaration of the interface class before the
Concept+Model classes to make the class name usable in declarations.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D91499
In ODS, attributes of an operation can be provided as a part of the "arguments"
field, together with operands. Such attributes are accepted by the op builder
and have accessors generated.
Implement similar functionality for ODS-generated op-specific Python bindings:
the `__init__` method now accepts arguments together with operands, in the same
order as in the ODS `arguments` field; the instance properties are introduced
to OpView classes to access the attributes.
This initial implementation accepts and returns instances of the corresponding
attribute class, and not the underlying values since the mapping scheme of the
value types between C++, C and Python is not yet clear. Default-valued
attributes are not supported as that would require Python to be able to parse
C++ literals.
Since attributes in ODS are tightely related to the actual C++ type system,
provide a separate Tablegen file with the mapping between ODS storage type for
attributes (typically, the underlying C++ attribute class), and the
corresponding class name. So far, this might look unnecessary since all names
match exactly, but this is not necessarily the cases for non-standard,
out-of-tree attributes, which may also be placed in non-default namespaces or
Python modules. This also allows out-of-tree users to generate Python bindings
without having to modify the bindings generator itself. Storage type was
preferred over the Tablegen "def" of the attribute class because ODS
essentially encodes attribute _constraints_ rather than classes, e.g. there may
be many Tablegen "def"s in the ODS that correspond to the same attribute type
with additional constraints
The presence of the explicit mapping requires the change in the .td file
structure: instead of just calling the bindings generator directly on the main
ODS file of the dialect, it becomes necessary to create a new file that
includes the main ODS file of the dialect and provides the mapping for
attribute types. Arguably, this approach offers better separability of the
Python bindings in the build system as the main dialect no longer needs to know
that it is being processed by the bindings generator.
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D91542
The tokens are already handled by the lexer. This revision exposes them
through the parser interface.
This revision also adds missing functions for question mark parsing and
completes the list of valid punctuation tokens in the documentation.
Differential Revision: https://reviews.llvm.org/D90907
Add an ODS-backed generator of default builders. This currently does not
support operation with attribute arguments, for which the builder is
just ignored. Attribute support will be introduced separately for
builders and accessors.
Default builders are always generated with the same number of result and
operand groups as the ODS specification, i.e. one group per each operand
or result. Optional elements accept None but cannot be omitted. Variadic
groups accept iterable objects and cannot be replaced with a single
object.
For some operations, it is possible to infer the result type given the
traits, but most traits rely on inline pieces of C++ that we cannot
(yet) forward to Python bindings. Since the Ops where the inference is
possible (having the `SameOperandAndResultTypes` trait or
`TypeMatchesWith` without transform field) are a small minority, they
also require the result type to make the builder syntax more consistent.
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D91190
I would like to use this for D90589 to switch std.alloc to assemblyFormat.
Hopefully it will be useful in other places as well.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D91068
This only exposes the ability to round-trip a textual pipeline at the
moment.
To exercise it, we also bind the libTransforms in a new Python extension. This
does not include any interesting bindings, but it includes all the
mechanism to add separate native extensions and load them dynamically.
As such passes in libTransforms are only registered after `import
mlir.transforms`.
To support this global registration, the TableGen backend is also
extended to bind to the C API the group registration for passes.
Reviewed By: stellaraccident
Differential Revision: https://reviews.llvm.org/D90819
Introduce an ODS/Tablegen backend producing Op wrappers for Python bindings
based on the ODS operation definition. Usage:
mlir-tblgen -gen-python-op-bindings -Iinclude <path/to/Ops.td> \
-bind-dialect=<dialect-name>
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D90960
We were discussing on discord regarding the need for extension-based systems like Python to dynamically link against MLIR (or else you can only have one extension that depends on it). Currently, when I set that up, I piggy-backed off of the flag that enables build libLLVM.so and libMLIR.so and depended on libMLIR.so from the python extension if shared library building was enabled. However, this is less than ideal.
In the current setup, libMLIR.so exports both all symbols from the C++ API and the C-API. The former is a kitchen sink and the latter is curated. We should be splitting them and for things that are properly factored to depend on the C-API, they should have the option to *only* depend on the C-API, and we should build that shared library no matter what. Its presence isn't just an optimization: it is a key part of the system.
To do this right, I needed to:
* Introduce visibility macros into mlir-c/Support.h. These should work on both *nix and windows as-is.
* Create a new libMLIRPublicAPI.so with just the mlir-c object files.
* Compile the C-API with -fvisibility=hidden.
* Conditionally depend on the libMLIR.so from libMLIRPublicAPI.so if building libMLIR.so (otherwise, also links against the static libs and will produce a mondo libMLIRPublicAPI.so).
* Disable re-exporting of static library symbols that come in as transitive deps.
This gives us a dynamic linked C-API layer that is minimal and should work as-is on all platforms. Since we don't support libMLIR.so building on Windows yet (and it is not very DLL friendly), this will fall back to a mondo build of libMLIRPublicAPI.so, which has its uses (it is also the most size conscious way to go if you happen to know exactly what you need).
Sizes (release/stripped, Ubuntu 20.04):
Shared library build:
libMLIRPublicAPI.so: 121Kb
_mlir.cpython-38-x86_64-linux-gnu.so: 1.4Mb
mlir-capi-ir-test: 135Kb
libMLIR.so: 21Mb
Static build:
libMLIRPublicAPI.so: 5.5Mb (since this is a "static" build, this includes the MLIR implementation as non-exported code).
_mlir.cpython-38-x86_64-linux-gnu.so: 1.4Mb
mlir-capi-ir-test: 44Kb
Things like npcomp and circt which bring their own dialects/transforms/etc would still need the shared library build and code that links against libMLIR.so (since it is all C++ interop stuff), but hopefully things that only depend on the public C-API can just have the one narrow dep.
I spot checked everything with nm, and it looks good in terms of what is exporting/importing from each layer.
I'm not in a hurry to land this, but if it is controversial, I'll probably split off the Support.h and API visibility macro changes, since we should set that pattern regardless.
Reviewed By: mehdi_amini, benvanik
Differential Revision: https://reviews.llvm.org/D90824
This is exposing the basic functionalities (create, nest, addPass, run) of
the PassManager through the C API in the new header: `include/mlir-c/Pass.h`.
In order to exercise it in the unit-test, a basic TableGen backend is
also provided to generate a simple C wrapper around the pass
constructor. It is used to expose the libTransforms passes to the C API.
Reviewed By: stellaraccident, ftynse
Differential Revision: https://reviews.llvm.org/D90667
When compiling for code size, the use of a vtable causes a destructor(and constructor in certain cases) to be generated for the class. Interface models don't need a complex constructor or a destructor, so this can lead to many megabytes of code size increase(even in opt). This revision switches to a simpler struct of function pointers approach that accomplishes the same API requirements as before. This change requires no updates to user code, or any other code aside from the generator, as the user facing API is still exactly the same.
Differential Revision: https://reviews.llvm.org/D90085
A recent commit introduced a new syntax for specifying builder arguments in
ODS, which is better amenable to automated processing, and deprecated the old
form. Transition all dialects as well as Linalg ODS generator to use the new
syntax.
Add a deprecation notice to ODS generator.
Reviewed By: rriddle, jpienaar
Differential Revision: https://reviews.llvm.org/D90038
Historically, custom builder specification in OpBuilder has been accepting the
formal parameter list for the builder method as a raw string containing C++.
While this worked well to connect the signature and the body, this became
problematic when ODS needs to manipulate the parameter list, e.g. to inject
OpBuilder or to trim default values when generating the definition. This has
also become inconsistent with other method declarations, in particular in
interface definitions.
Introduce the possibility to define OpBuilder formal parameters using a
TableGen dag similarly to other methods. Additionally, introduce a mechanism to
declare parameters with default values using an additional class. This
mechanism can be reused in other methods. The string-based builder signature
declaration is deprecated and will be removed after a transition period.
Reviewed By: jpienaar
Differential Revision: https://reviews.llvm.org/D89470
Have the ODS TypeDef generator write the getChecked() definition.
Also add to TypeParamCommaFormatter a `JustParams` format and
refactor around that.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D89438
Added an underlying matcher for generic constant ops. This
included a rewriter of RewriterGen to make variable use more
clear.
Differential Revision: https://reviews.llvm.org/D89161
This CL allows user to specify the same name for the operands in the source pattern which implicitly enforces equality on operands with the same name.
E.g., Pat<(OpA $a, $b, $a) ... > would create a matching rule for checking equality for the first and the last operands. Equality of the operands is enforced at any depth, e.g., OpA ($a, $b, OpB($a, $c, OpC ($a))).
Example usage: Pat<(Reshape $arg0, (Shape $arg0)), (replaceWithValue $arg0)>
Note, this feature only covers operands but not attributes.
Current use cases are based on the operand equality and explicitly add the constraint into the pattern. Attribute equality will be worked out on the different CL.
Reviewed By: jpienaar
Differential Revision: https://reviews.llvm.org/D89254
This reverts commit 7271c1bcb9.
This broke the gcc-5 build:
/usr/include/c++/5/ext/new_allocator.h:120:4: error: no matching function for call to 'std::pair<const std::__cxx11::basic_string<char>, mlir::tblgen::SymbolInfoMap::SymbolInfo>::pair(llvm::StringRef&, mlir::tblgen::SymbolInfoMap::SymbolInfo)'
{ ::new((void *)__p) _Up(std::forward<_Args>(__args)...); }
^
In file included from /usr/include/c++/5/utility:70:0,
from llvm/include/llvm/Support/type_traits.h:18,
from llvm/include/llvm/Support/Casting.h:18,
from mlir/include/mlir/Support/LLVM.h:24,
from mlir/include/mlir/TableGen/Pattern.h:17,
from mlir/lib/TableGen/Pattern.cpp:14:
/usr/include/c++/5/bits/stl_pair.h:206:9: note: candidate: template<class ... _Args1, long unsigned int ..._Indexes1, class ... _Args2, long unsigned int ..._Indexes2> std::pair<_T1, _T2>::pair(std::tuple<_Args1 ...>&, std::tuple<_Args2 ...>&, std::_Index_tuple<_Indexes1 ...>, std::_Index_tuple<_Indexes2 ...>)
pair(tuple<_Args1...>&, tuple<_Args2...>&,
^
Adds a TypeDef class to OpBase and backing generation code. Allows one
to define the Type, its parameters, and printer/parser methods in ODS.
Can generate the Type C++ class, accessors, storage class, per-parameter
custom allocators (for the storage constructor), and documentation.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D86904
This CL allows user to specify the same name for the operands in the source pattern which implicitly enforces equality on operands with the same name.
E.g., Pat<(OpA $a, $b, $a) ... > would create a matching rule for checking equality for the first and the last operands. Equality of the operands is enforced at any depth, e.g., OpA ($a, $b, OpB($a, $c, OpC ($a))).
Example usage: Pat<(Reshape $arg0, (Shape $arg0)), (replaceWithValue $arg0)>
Note, this feature only covers operands but not attributes.
Current use cases are based on the operand equality and explicitly add the constraint into the pattern. Attribute equality will be worked out on the different CL.
Differential Revision: https://reviews.llvm.org/D89254
This revision introduces support for buffer allocation for any named linalg op.
To avoid template instantiating many ops, a new ConversionPattern is created to capture the LinalgOp interface.
Some APIs are updated to remain consistent with MLIR style:
`OwningRewritePatternList * -> OwningRewritePatternList &`
`BufferAssignmentTypeConverter * -> BufferAssignmentTypeConverter &`
Differential revision: https://reviews.llvm.org/D89226
mlir-tblgen was incompatible with libLLVM, due to explicit linkage with
libLLVMSupport etc.
As it cannot link with libLLVM, make sure all lib it uses are not using libLLVM
either.
As a side effect, also remove some explicit references to LLVM libs and use
components instead.
Differential Revision: https://reviews.llvm.org/D88846
This change replaces container used for storing temporary
strings for generated code to std::list.
SmallVector may reallocate internal data, which will invalidate
references when more than one extended instruction set is
generated.
Reviewed By: mravishankar, antiagainst
Differential Revision: https://reviews.llvm.org/D88626
Class simplifies keeping track of the indentation while emitting. For every new line the current indentation is simply prefixed (if not at start of line, then it just emits as normal). Add a simple Region helper that makes it easy to have the C++ scope match the emitted scope.
Use this in op doc generator and rewrite generator.
This reverts revert commit be185b6a73 addresses shared lib failure by fixing up cmake files.
Differential Revision: https://reviews.llvm.org/D84107
Class simplifies keeping track of the indentation while emitting. For every new line the current indentation is simply prefixed (if not at start of line, then it just emits as normal). Add a simple Region helper that makes it easy to have the C++ scope match the emitted scope.
Use this in op doc generator and rewrite generator.
Differential Revision: https://reviews.llvm.org/D84107
This tweaks the generated code for parsing attributes with a custom
directive to call `addAttribute` on the `OperationState` directly,
and adds a newline after this call. Previously, the generated code
would call `addAttribute` on the `OperationState` field `attributes`,
which has no such method and fails to compile. Furthermore, the lack
of newline would generate code with incorrectly formatted single line
`if` statements. Added tests for parsing and printing attributes with
a custom directive.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D87860
- Change the default builders to use TypeRange instead of ArrayRef<Type>
- Custom builders defined in LinalgStructuredOps now conflict with the default
separate param ones, but the default collective params one is still needed. Resolve
this by replicating the collective param builder as a custom builder and skipping
the generation of default builders for these ops.
Differential Revision: https://reviews.llvm.org/D87926
The OpBuilder is required to start with OpBuilder and OperationState, so remove
the need for the user to specify it. To make it simpler to update callers,
retain the legacy behavior for now and skip injecting OpBuilder/OperationState
when params start with OpBuilder.
Related to bug 47442.
Differential Revision: https://reviews.llvm.org/D88050
This revision allows representing a reduction at the level of linalg on tensors for named ops. When a structured op has a reduction and returns tensor(s), new conventions are added and documented.
As an illustration, the syntax for a `linalg.matmul` writing into a buffer is:
```
linalg.matmul ins(%a, %b : memref<?x?xf32>, tensor<?x?xf32>)
outs(%c : memref<?x?xf32>)
```
, whereas the syntax for a `linalg.matmul` returning a new tensor is:
```
%d = linalg.matmul ins(%a, %b : tensor<?x?xf32>, memref<?x?xf32>)
init(%c : memref<?x?xf32>)
-> tensor<?x?xf32>
```
Other parts of linalg will be extended accordingly to allow mixed buffer/tensor semantics in the presence of reductions.
- Change OpClass new method addition to find and eliminate any existing methods that
are made redundant by the newly added method, as well as detect if the newly added
method will be redundant and return nullptr in that case.
- To facilitate that, add the notion of resolved and unresolved parameters, where resolved
parameters have each parameter type known, so that redundancy checks on methods
with same name but different parameter types can be done.
- Eliminate existing code to avoid adding conflicting/redundant build methods and rely
on this new mechanism to eliminate conflicting build methods.
Fixes https://bugs.llvm.org/show_bug.cgi?id=47095
Differential Revision: https://reviews.llvm.org/D87059
Now backends spell out which namespace they want to be in, instead of relying on
clients #including them inside already-opened namespaces. This also means that
cppNamespaces should be fully qualified, and there's no implicit "::mlir::"
prepended to them anymore.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D86811
Its handling is similar to optional attributes, except for the
getter method.
Reviewed By: rsuderman
Differential Revision: https://reviews.llvm.org/D87055
This adds some initial support for regions and does not support formatting the specific arguments of a region. For now this can be achieved by using a custom directive that formats the arguments and then parses the region.
Differential Revision: https://reviews.llvm.org/D86760
Symbol names are a special form of StringAttr that get treated specially in certain areas, such as formatting. This revision adds a special derived attr for them in ODS and adds support in the assemblyFormat for formatting them properly.
Differential Revision: https://reviews.llvm.org/D86759
This revision adds support for custom directives to the declarative assembly format. This allows for users to use C++ for printing and parsing subsections of an otherwise declaratively specified format. The custom directive is structured as follows:
```
custom-directive ::= `custom` `<` UserDirective `>` `(` Params `)`
```
`user-directive` is used as a suffix when this directive is used during printing and parsing. When parsing, `parseUserDirective` will be invoked. When printing, `printUserDirective` will be invoked. The first parameter to these methods must be a reference to either the OpAsmParser, or OpAsmPrinter. The type of rest of the parameters is dependent on the `Params` specified in the assembly format.
Differential Revision: https://reviews.llvm.org/D84719
The PDL Interpreter dialect provides a lower level abstraction compared to the PDL dialect, and is targeted towards low level optimization and interpreter code generation. The dialect operations encapsulates low-level pattern match and rewrite "primitives", such as navigating the IR (Operation::getOperand), creating new operations (OpBuilder::create), etc. Many of the operations within this dialect also fuse branching control flow with some form of a predicate comparison operation. This type of fusion reduces the amount of work that an interpreter must do when executing.
An example of this representation is shown below:
```mlir
// The following high level PDL pattern:
pdl.pattern : benefit(1) {
%resultType = pdl.type
%inputOperand = pdl.input
%root, %results = pdl.operation "foo.op"(%inputOperand) -> %resultType
pdl.rewrite %root {
pdl.replace %root with (%inputOperand)
}
}
// May be represented in the interpreter dialect as follows:
module {
func @matcher(%arg0: !pdl.operation) {
pdl_interp.check_operation_name of %arg0 is "foo.op" -> ^bb2, ^bb1
^bb1:
pdl_interp.return
^bb2:
pdl_interp.check_operand_count of %arg0 is 1 -> ^bb3, ^bb1
^bb3:
pdl_interp.check_result_count of %arg0 is 1 -> ^bb4, ^bb1
^bb4:
%0 = pdl_interp.get_operand 0 of %arg0
pdl_interp.is_not_null %0 : !pdl.value -> ^bb5, ^bb1
^bb5:
%1 = pdl_interp.get_result 0 of %arg0
pdl_interp.is_not_null %1 : !pdl.value -> ^bb6, ^bb1
^bb6:
pdl_interp.record_match @rewriters::@rewriter(%0, %arg0 : !pdl.value, !pdl.operation) : benefit(1), loc([%arg0]), root("foo.op") -> ^bb1
}
module @rewriters {
func @rewriter(%arg0: !pdl.value, %arg1: !pdl.operation) {
pdl_interp.replace %arg1 with(%arg0)
pdl_interp.return
}
}
}
```
Differential Revision: https://reviews.llvm.org/D84579
PDL presents a high level abstraction for the rewrite pattern infrastructure available in MLIR. This abstraction allows for representing patterns transforming MLIR, as MLIR. This allows for applying all of the benefits that the general MLIR infrastructure provides, to the infrastructure itself. This means that pattern matching can be more easily verified for correctness, targeted by frontends, and optimized.
PDL abstracts over various different aspects of patterns and core MLIR data structures. Patterns are specified via a `pdl.pattern` operation. These operations contain a region body for the "matcher" code, and terminate with a `pdl.rewrite` that either dispatches to an external rewriter or contains a region for the rewrite specified via `pdl`. The types of values in `pdl` are handle types to MLIR C++ types, with `!pdl.attribute`, `!pdl.operation`, and `!pdl.type` directly mapping to `mlir::Attribute`, `mlir::Operation*`, and `mlir::Value` respectively.
An example pattern is shown below:
```mlir
// pdl.pattern contains metadata similarly to a `RewritePattern`.
pdl.pattern : benefit(1) {
// External input operand values are specified via `pdl.input` operations.
// Result types are constrainted via `pdl.type` operations.
%resultType = pdl.type
%inputOperand = pdl.input
%root, %results = pdl.operation "foo.op"(%inputOperand) -> %resultType
pdl.rewrite(%root) {
pdl.replace %root with (%inputOperand)
}
}
```
This is a culmination of the work originally discussed here: https://groups.google.com/a/tensorflow.org/g/mlir/c/j_bn74ByxlQ
Differential Revision: https://reviews.llvm.org/D84578
This changes the behavior of constructing MLIRContext to no longer load globally
registered dialects on construction. Instead Dialects are only loaded explicitly
on demand:
- the Parser is lazily loading Dialects in the context as it encounters them
during parsing. This is the only purpose for registering dialects and not load
them in the context.
- Passes are expected to declare the dialects they will create entity from
(Operations, Attributes, or Types), and the PassManager is loading Dialects into
the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only
need to load the dialect for the IR it will emit, and the optimizer is
self-contained and load the required Dialects. For example in the Toy tutorial,
the compiler only needs to load the Toy dialect in the Context, all the others
(linalg, affine, std, LLVM, ...) are automatically loaded depending on the
optimization pipeline enabled.
To adjust to this change, stop using the existing dialect registration: the
global registry will be removed soon.
1) For passes, you need to override the method:
virtual void getDependentDialects(DialectRegistry ®istry) const {}
and registery on the provided registry any dialect that this pass can produce.
Passes defined in TableGen can provide this list in the dependentDialects list
field.
2) For dialects, on construction you can register dependent dialects using the
provided MLIRContext: `context.getOrLoadDialect<DialectName>()`
This is useful if a dialect may canonicalize or have interfaces involving
another dialect.
3) For loading IR, dialect that can be in the input file must be explicitly
registered with the context. `MlirOptMain()` is taking an explicit registry for
this purpose. See how the standalone-opt.cpp example is setup:
mlir::DialectRegistry registry;
registry.insert<mlir::standalone::StandaloneDialect>();
registry.insert<mlir::StandardOpsDialect>();
Only operations from these two dialects can be in the input file. To include all
of the dialects in MLIR Core, you can populate the registry this way:
mlir::registerAllDialects(registry);
4) For `mlir-translate` callback, as well as frontend, Dialects can be loaded in
the context before emitting the IR: context.getOrLoadDialect<ToyDialect>()
Differential Revision: https://reviews.llvm.org/D85622
This changes the behavior of constructing MLIRContext to no longer load globally
registered dialects on construction. Instead Dialects are only loaded explicitly
on demand:
- the Parser is lazily loading Dialects in the context as it encounters them
during parsing. This is the only purpose for registering dialects and not load
them in the context.
- Passes are expected to declare the dialects they will create entity from
(Operations, Attributes, or Types), and the PassManager is loading Dialects into
the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only
need to load the dialect for the IR it will emit, and the optimizer is
self-contained and load the required Dialects. For example in the Toy tutorial,
the compiler only needs to load the Toy dialect in the Context, all the others
(linalg, affine, std, LLVM, ...) are automatically loaded depending on the
optimization pipeline enabled.
To adjust to this change, stop using the existing dialect registration: the
global registry will be removed soon.
1) For passes, you need to override the method:
virtual void getDependentDialects(DialectRegistry ®istry) const {}
and registery on the provided registry any dialect that this pass can produce.
Passes defined in TableGen can provide this list in the dependentDialects list
field.
2) For dialects, on construction you can register dependent dialects using the
provided MLIRContext: `context.getOrLoadDialect<DialectName>()`
This is useful if a dialect may canonicalize or have interfaces involving
another dialect.
3) For loading IR, dialect that can be in the input file must be explicitly
registered with the context. `MlirOptMain()` is taking an explicit registry for
this purpose. See how the standalone-opt.cpp example is setup:
mlir::DialectRegistry registry;
registry.insert<mlir::standalone::StandaloneDialect>();
registry.insert<mlir::StandardOpsDialect>();
Only operations from these two dialects can be in the input file. To include all
of the dialects in MLIR Core, you can populate the registry this way:
mlir::registerAllDialects(registry);
4) For `mlir-translate` callback, as well as frontend, Dialects can be loaded in
the context before emitting the IR: context.getOrLoadDialect<ToyDialect>()
Differential Revision: https://reviews.llvm.org/D85622
This changes the behavior of constructing MLIRContext to no longer load globally
registered dialects on construction. Instead Dialects are only loaded explicitly
on demand:
- the Parser is lazily loading Dialects in the context as it encounters them
during parsing. This is the only purpose for registering dialects and not load
them in the context.
- Passes are expected to declare the dialects they will create entity from
(Operations, Attributes, or Types), and the PassManager is loading Dialects into
the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only
need to load the dialect for the IR it will emit, and the optimizer is
self-contained and load the required Dialects. For example in the Toy tutorial,
the compiler only needs to load the Toy dialect in the Context, all the others
(linalg, affine, std, LLVM, ...) are automatically loaded depending on the
optimization pipeline enabled.
To adjust to this change, stop using the existing dialect registration: the
global registry will be removed soon.
1) For passes, you need to override the method:
virtual void getDependentDialects(DialectRegistry ®istry) const {}
and registery on the provided registry any dialect that this pass can produce.
Passes defined in TableGen can provide this list in the dependentDialects list
field.
2) For dialects, on construction you can register dependent dialects using the
provided MLIRContext: `context.getOrLoadDialect<DialectName>()`
This is useful if a dialect may canonicalize or have interfaces involving
another dialect.
3) For loading IR, dialect that can be in the input file must be explicitly
registered with the context. `MlirOptMain()` is taking an explicit registry for
this purpose. See how the standalone-opt.cpp example is setup:
mlir::DialectRegistry registry;
mlir::registerDialect<mlir::standalone::StandaloneDialect>();
mlir::registerDialect<mlir::StandardOpsDialect>();
Only operations from these two dialects can be in the input file. To include all
of the dialects in MLIR Core, you can populate the registry this way:
mlir::registerAllDialects(registry);
4) For `mlir-translate` callback, as well as frontend, Dialects can be loaded in
the context before emitting the IR: context.getOrLoadDialect<ToyDialect>()
This changes the behavior of constructing MLIRContext to no longer load globally registered dialects on construction. Instead Dialects are only loaded explicitly on demand:
- the Parser is lazily loading Dialects in the context as it encounters them during parsing. This is the only purpose for registering dialects and not load them in the context.
- Passes are expected to declare the dialects they will create entity from (Operations, Attributes, or Types), and the PassManager is loading Dialects into the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only need to load the dialect for the IR it will emit, and the optimizer is self-contained and load the required Dialects. For example in the Toy tutorial, the compiler only needs to load the Toy dialect in the Context, all the others (linalg, affine, std, LLVM, ...) are automatically loaded depending on the optimization pipeline enabled.
Differential Revision: https://reviews.llvm.org/D85622
This changes the behavior of constructing MLIRContext to no longer load globally registered dialects on construction. Instead Dialects are only loaded explicitly on demand:
- the Parser is lazily loading Dialects in the context as it encounters them during parsing. This is the only purpose for registering dialects and not load them in the context.
- Passes are expected to declare the dialects they will create entity from (Operations, Attributes, or Types), and the PassManager is loading Dialects into the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only need to load the dialect for the IR it will emit, and the optimizer is self-contained and load the required Dialects. For example in the Toy tutorial, the compiler only needs to load the Toy dialect in the Context, all the others (linalg, affine, std, LLVM, ...) are automatically loaded depending on the optimization pipeline enabled.
This patch adds the translation of the proc_bind clause in a
parallel operation.
The values that can be specified for the proc_bind clause are
specified in the OMP.td tablegen file in the llvm/Frontend/OpenMP
directory. From this single source of truth enumeration for
proc_bind is generated in llvm and mlir (used in specification of
the parallel Operation in the OpenMP dialect). A function to return
the enum value from the string representation is also generated.
A new header file (DirectiveEmitter.h) containing definitions of
classes directive, clause, clauseval etc is created so that it can
be used in mlir as well.
Reviewers: clementval, jdoerfert, DavidTruby
Differential Revision: https://reviews.llvm.org/D84347
- Fix ODS framework to suppress build methods that infer result types and are
ambiguous with collective variants. This applies to operations with a single variadic
inputs whose result types can be inferred.
- Extended OpBuildGenTest to test these kinds of ops.
Differential Revision: https://reviews.llvm.org/D85060
This patch moves the registration to a method in the MLIRContext: getOrCreateDialect<ConcreteDialect>()
This method requires dialect to provide a static getDialectNamespace()
and store a TypeID on the Dialect itself, which allows to lazyily
create a dialect when not yet loaded in the context.
As a side effect, it means that duplicated registration of the same
dialect is not an issue anymore.
To limit the boilerplate, TableGen dialect generation is modified to
emit the constructor entirely and invoke separately a "init()" method
that the user implements.
Differential Revision: https://reviews.llvm.org/D85495
Unit attributes are given meaning by their existence, and thus have no meaningful value beyond "is it present". As such, in the format of an operation unit attributes are generally used to guard the printing of other elements and aren't generally printed themselves; as the presence of the group when parsing means that the unit attribute should be added. This revision adds support to the declarative format for eliding unit attributes in situations where they anchor an optional group, but aren't the first element.
For example,
```
let assemblyFormat = "(`is_optional` $unit_attr^)? attr-dict";
```
would print `foo.op is_optional` when $unit_attr is present, instead of the current `foo.op is_optional unit`.
Differential Revision: https://reviews.llvm.org/D84577
The current output is a bit clunky and requires including files+macros everywhere, or manually wrapping the file inclusion in a registration function. This revision refactors the pass backend to automatically generate `registerFooPass`/`registerFooPasses` functions that wrap the pass registration. `gen-pass-decls` now takes a `-name` input that specifies a tag name for the group of passes that are being generated. For each pass, the generator now produces a `registerFooPass` where `Foo` is the name of the definition specified in tablegen. It also generates a `registerGroupPasses`, where `Group` is the tag provided via the `-name` input parameter, that registers all of the passes present.
Differential Revision: https://reviews.llvm.org/D84983
The current modeling of LLVM IR types in MLIR is based on the LLVMType class
that wraps a raw `llvm::Type *` and delegates uniquing, printing and parsing to
LLVM itself. This is model makes thread-safe type manipulation hard and is
being progressively replaced with a cleaner MLIR model that replicates the type
system. In the new model, LLVMType will no longer have an underlying LLVM IR
type. Restrict access to this type in the current model in preparation for the
change.
Reviewed By: nicolasvasilache
Differential Revision: https://reviews.llvm.org/D84389
- Added more default values for `attributes` parameter for 2 more build methods
- Extend the op-decls.td unit test to test these build methods.
Differential Revision: https://reviews.llvm.org/D83839
This adds a `parseOptionalAttribute` method to the OpAsmParser that allows for parsing optional attributes, in a similar fashion to how optional types are parsed. This also enables the use of attribute values as the first element of an assembly format optional group.
Differential Revision: https://reviews.llvm.org/D83712
Summary: Currently forward decls are included with all the op classes. But there are cases (say when splitting up headers) where one wants the forward decls but not all the classes. Add an option to enable this. This does not change any current behavior (some further refactoring is probably due here).
Differential Revision: https://reviews.llvm.org/D83727
- Provide default value for `ArrayRef<NamedAttribute> attributes` parameter of
the collective params build method.
- Change the `genSeparateArgParamBuilder` function to not generate build methods
that may be ambiguous with the new collective params build method.
- This change should help eliminate passing empty NamedAttribue ArrayRef when the
collective params build method is used
- Extend op-decl.td unit test to make sure the ambiguous build methods are not
generated.
Differential Revision: https://reviews.llvm.org/D83517
The namespace can be specified using the `cppNamespace` field. This matches the functionality already present on dialects, enums, etc. This fixes problems with using interfaces on operations in a different namespace than the interface was defined in.
Differential Revision: https://reviews.llvm.org/D83604
An operation can specify that an operation or result type matches the
type of another operation, result, or attribute via the `AllTypesMatch`
or `TypesMatchWith` constraints.
Use these constraints to also automatically resolve types in the
automatically generated assembly parser.
This way, only the attribute needs to be listed in `assemblyFormat`,
e.g. for constant operations.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D78434
This enables better support for traits such as SameOperandsAndResultType, and other situations in which a variadic operand may be resolved from a non-variadic.
Differential Revision: https://reviews.llvm.org/D83011
This revision adds support to ODS for generating interfaces for attributes and types, in addition to operations. These interfaces can be specified using `AttrInterface` and `TypeInterface` in place of `OpInterface`. All of the features of `OpInterface` are supported except for the `verify` method, which does not have a matching representation in the Attribute/Type world. Generating these interface can be done using `gen-(attr|type)-interface-(defs|decls|docs)`.
Differential Revision: https://reviews.llvm.org/D81884
Also fixed bug in type inferface generator to address bug where operands and
attributes are interleaved.
Differential Revision: https://reviews.llvm.org/D82819
Using fully qualified names wherever possible avoids ambiguous class and function names. This is a follow-up to D82371.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D82471
Summary: The Pass class exists in both the mlir and the llvm namespaces. Use the fully qualified class name to avoid any ambiguities.
Reviewers: rriddle
Reviewed By: rriddle
Subscribers: mehdi_amini, jpienaar, shauheen, antiagainst, nicolasvasilache, arpith-jacob, mgester, lucyrfox, aartbik, liufengdb, stephenneuendorffer, Joonsoo, grosul1, jurahul, msifontes
Tags: #mlir
Differential Revision: https://reviews.llvm.org/D82371
Add option to filter which op the OpDefinitionsGen run on. This enables having multiple ops together in the same TD file but generating different CC files for them (useful if one wants to use multiclasses or split out 1 dialect into multiple different libraries). There is probably more general query here (e.g., split out all ops that don't have a verify method, or that are commutative) but filtering based on op name (e.g., test.a_op) seemed a reasonable start and didn't require inventing a query specification mechanism here.
Differential Revision: https://reviews.llvm.org/D82319
Summary:
Currently, the TableGen rewrite generates redundant native calls in MLIR DRR files. This is a problem as some native calls may involve significant computations (e.g. when performing constant propagation where every values in a large tensor is touched).
The pattern was as follow:
```c++
if (native-call(args)) tblgen_attrs.emplace_back(rewriter, attribute, native-call(args))
```
The replacement pattern compute `native-call(args)` once and then use it both in the `if` condition and the `emplace_back` call.
Differential Revision: https://reviews.llvm.org/D82101
This allows verifying op-indepent attributes (e.g., attributes that do not require the op to have been created) before constructing an operation. These include checking whether required attributes are defined or constraints on attributes (such as I32 attribute). This is not perfect (e.g., if one had a disjunctive constraint where one part relied on the op and the other doesn't, then this would not try and extract the op independent from the op dependent).
The next step is to move these out to a trait that could be verified earlier than in the generated method. The first use case is for inferring the return type while constructing the op. At that point you don't have an Operation yet and that ends up in one having to duplicate the same checks, e.g., verify that attribute A is defined before querying A in shape function which requires that duplication. Instead this allows one to invoke a method to verify all the traits and, if this is checked first during verification, then all other traits could use attributes knowing they have been verified.
It is a little bit funny to have these on the adaptor, but I see the adaptor as a place to collect information about the op before the op is constructed (e.g., avoiding stringly typed accessors, verifying what is possible to verify before the op is constructed) while being cheap to use even with constructed op (so layer of indirection between the op constructed/being constructed). And from that point of view it made sense to me.
Differential Revision: https://reviews.llvm.org/D80842
This allows constructing operand adaptor from existing op (useful for commonalizing verification as I want to do in a follow up).
I also add ability to use member initializers for the generated adaptor constructors for convenience.
Differential Revision: https://reviews.llvm.org/D80667
Take advantage of equality constrains to generate the type inference interface.
This is used for equality and trivially built types. The type inference method
is only generated when no type inference trait is specified already.
This reorders verification that changes some test error messages.
Differential Revision: https://reviews.llvm.org/D80484
* Enables using with more variadic sized operands;
* Generate convenience accessors for attributes;
- The accessor are named the same as their name in ODS and returns attribute
type (not convenience type) and no derived attributes.
This is first step to changing adapter to support verifying argument
constraints before the op is even created. This does not change the name of
adaptor nor does it require it except for ops with variadic operands to keep this change smaller.
Considered creating separate adapter but decided against that given operands also require attributes in general (and definitely for verification of operands and attributes).
Differential Revision: https://reviews.llvm.org/D80420
Adds support for cooperative matrix support for arithmetic and cast
instructions. It also adds cooperative matrix store, muladd and matrixlength
instructions which are part of the extension.
Differential Revision: https://reviews.llvm.org/D80181
Enclose verifier code for AttrSizedOperandSegments and AttrSizedResultSegments
in a nested code block to avoid symbol collision.
Differential Revision: https://reviews.llvm.org/D80250
Summary: This revision adds support for assembly formats with optional attributes. It elides optional attributes that are part of the syntax from the attribute dictionary.
Reviewers: ftynse, Kayjukh
Reviewed By: ftynse, Kayjukh
Subscribers: mehdi_amini, rriddle, jpienaar, shauheen, antiagainst, nicolasvasilache, arpith-jacob, mgester, lucyrfox, liufengdb, stephenneuendorffer, Joonsoo, grosul1, frgossen, jurahul, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80113
This normalize the name of the tablegen file with the name of the generated
files (SideEffectInterfaces.h.inc) and the other Interface tablegen files,
which all end in Interface(s).td
Differential Revision: https://reviews.llvm.org/D79517
This is a wrapper around vector of NamedAttributes that keeps track of whether sorted and does some minimal effort to remain sorted (doing more, e.g., appending attributes in sorted order, could be done in follow up). It contains whether sorted and if a DictionaryAttr is queried, it caches the returned DictionaryAttr along with whether sorted.
Change MutableDictionaryAttr to always return a non-null Attribute even when empty (reserve null cases for errors). To this end change the getter to take a context as input so that the empty DictionaryAttr could be queried. Also create one instance of the empty dictionary attribute that could be reused without needing to lock context etc.
Update infer type op interface to use DictionaryAttr and use NamedAttrList to avoid incurring multiple conversion costs.
Fix bug in sorting helper function.
Differential Revision: https://reviews.llvm.org/D79463
SPIR-V ops can mix operands and attributes in the definition. These
operands and attributes are serialized in the exact order of the definition
to match SPIR-V binary format requirements. It can cause excessive
generated code bloat because we are emitting code to handle each
operand/attribute separately. So here we probe first to check whether all
the operands are ahead of attributes. Then we can serialize all operands
together.
This removes ~1000 lines of code from the generated inc file.
Differential Revision: https://reviews.llvm.org/D79446
These template functions are used in the serializer, where we can
actually directly query the opcode from the op's definition and
use that in the auto-generated serialization logic.
This removes a set of templates accounting for 319 lines from
the auto-generated inc file.
Differential Revision: https://reviews.llvm.org/D79444
- Exports MLIR targets to be used out-of-tree.
- mimicks `add_clang_library` and `add_flang_library`.
- Fixes libMLIR.so
After https://reviews.llvm.org/D77515 libMLIR.so was no longer containing
any object files. We originally had a cludge there that made it work with
the static initalizers and when switchting away from that to the way the
clang shlib does it, I noticed that MLIR doesn't create a `obj.{name}` target,
and doesn't export it's targets to `lib/cmake/mlir`.
This is due to MLIR using `add_llvm_library` under the hood, which adds
the target to `llvmexports`.
Differential Revision: https://reviews.llvm.org/D78773
[MLIR] Fix libMLIR.so and LLVM_LINK_LLVM_DYLIB
Primarily, this patch moves all mlir references to LLVM libraries into
either LLVM_LINK_COMPONENTS or LINK_COMPONENTS. This enables magic in
the llvm cmake files to automatically replace reference to LLVM components
with references to libLLVM.so when necessary. Among other things, this
completes fixing libMLIR.so, which has been broken for some configurations
since D77515.
Unlike previously, the pattern is now that mlir libraries should almost
always use add_mlir_library. Previously, some libraries still used
add_llvm_library. However, this confuses the export of targets for use
out of tree because libraries specified with add_llvm_library are exported
by LLVM. Instead users which don't need/can't be linked into libMLIR.so
can specify EXCLUDE_FROM_LIBMLIR
A common error mode is linking with LLVM libraries outside of LINK_COMPONENTS.
This almost always results in symbol confusion or multiply defined options
in LLVM when the same object file is included as a static library and
as part of libLLVM.so. To catch these errors more directly, there's now
mlir_check_all_link_libraries.
To simplify usage of add_mlir_library, we assume that all mlir
libraries depend on LLVMSupport, so it's not necessary to separately specify
it.
tested with:
BUILD_SHARED_LIBS=on,
BUILD_SHARED_LIBS=off + LLVM_BUILD_LLVM_DYLIB,
BUILD_SHARED_LIBS=off + LLVM_BUILD_LLVM_DYLIB + LLVM_LINK_LLVM_DYLIB.
By: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Differential Revision: https://reviews.llvm.org/D79067
[MLIR] Move from using target_link_libraries to LINK_LIBS
This allows us to correctly generate dependencies for derived targets,
such as targets which are created for object libraries.
By: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Differential Revision: https://reviews.llvm.org/D79243
Three commits have been squashed to avoid intermediate build breakage.
Summary:
This is an initial version, currently supports OpString and OpLine
for autogenerated operations during (de)serialization.
Differential Revision: https://reviews.llvm.org/D79091
This range allows for performing many different operations on successor operands, including erasing/adding/setting. This removes the need for the explicit canEraseSuccessorOperand and eraseSuccessorOperand methods.
Differential Revision: https://reviews.llvm.org/D79077
Currently a declaration won't be generated if the method has a default implementation. Meaning that operations that wan't to override the default have to explicitly declare the method in the extraClassDeclarations. This revision adds an optional list parameter to DeclareOpInterfaceMethods to allow for specifying a set of methods that should always have the declarations generated, even if there is a default.
Differential Revision: https://reviews.llvm.org/D79030
This class allows for mutating an operand range in-place, and provides vector like API for adding/erasing/setting. ODS now uses this class to generate mutable wrappers for named operands, with the name `MutableOperandRange <operand-name>Mutable()`
Differential Revision: https://reviews.llvm.org/D78892
Summary:
When creating an operation with
* `AttrSizedOperandSegments` trait
* Variadic operands of only non-buildable types
* assemblyFormat to automatically generate the parser
the `builder` local variable is used, but never declared.
This adds a fix as well as a test for this case as existing ones use buildable types only.
Reviewers: rriddle, Kayjukh, grosser
Reviewed By: Kayjukh
Subscribers: mehdi_amini, jpienaar, shauheen, antiagainst, nicolasvasilache, arpith-jacob, mgester, lucyrfox, liufengdb, Joonsoo, grosul1, frgossen, llvm-commits
Tags: #mlir, #llvm
Differential Revision: https://reviews.llvm.org/D79004
As we start defining more complex Ops, we increasingly see the need for
Ops-with-regions to be able to construct Ops within their regions in
their ::build methods. However, these methods only have access to
Builder, and not OpBuilder. Creating a local instance of OpBuilder
inside ::build and using it fails to trigger the operation creation
hooks in derived builders (e.g., ConversionPatternRewriter). In this
case, we risk breaking the logic of the derived builder. At the same
time, OpBuilder::create, which is by far the largest user of ::build
already passes "this" as the first argument, so an OpBuilder instance is
already available.
Update all ::build methods in all Ops in MLIR and Flang to take
"OpBuilder &" instead of "Builder *". Note the change from pointer and
to reference to comply with the common style in MLIR, this also ensures
all other users must change their ::build methods.
Differential Revision: https://reviews.llvm.org/D78713
This provides a much cleaner interface into Symbols, and allows for users to start injecting op-specific information. For example, derived op can now inject when a symbol can be discarded if use_empty. This would let us drop unused external functions, which generally have public visibility.
This revision also adds a new `extraTraitClassDeclaration` field to ODS OpInterface to allow for injecting declarations into the trait class that gets attached to the operations.
Differential Revision: https://reviews.llvm.org/D78522
Summary:
Previously operations like std.load created methods for obtaining their
effects but did not inherit from the SideEffect interfaces when their
parameters were decorated with the information. The resulting situation
was that passes had no information on the SideEffects of std.load/store
and had to treat them more cautiously. This adds the inheritance
information when creating the methods.
As a side effect, many tests are modified, as they were using std.load
for testing and this oepration would be folded away as part of pattern
rewriting. Tests are modified to use store or to reutn the result of the
std.load.
Reviewers: mravishankar, antiagainst, nicolasvasilache, herhut, aartbik, ftynse!
Subscribers: mehdi_amini, rriddle, jpienaar, shauheen, antiagainst, nicolasvasilache, csigg, arpith-jacob, mgester, lucyrfox, liufengdb, Joonsoo, bader, grosul1, frgossen, Kayjukh, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78802
This revision refactors the structure of the operand storage such that there is no additional memory cost for resizable operand lists until it is required. This is done by using two different internal representations for the operand storage:
* One using trailing operands
* One using a dynamically allocated std::vector<OpOperand>
This allows for removing the resizable operand list bit, and will free up APIs from needing to workaround non-resizable operand lists.
Differential Revision: https://reviews.llvm.org/D78875
Now both Operation::operand_range and Operation::result_range have
.begin() and .end() for ranged-based for loop and we have
ValueRange for wrapping a single Value. We can remove the SmallVector
materialization!
Differential Revision: https://reviews.llvm.org/D78766
Summary:
Generate method to generate a DictionaryAttr with attribute values of
derived attribute. If a conversion back from the derived attribute C++
type to Attribute is not defined, then attempting to materialize such an
op's derived attributes would result in runtime failure.
This allows to treat derived attributes and attributes of an op in more
uniform manner where needed. The derived attributes are not added to the
operation but returned as new attribute instead.
Differential Revision: https://reviews.llvm.org/D78302
MLIR supports operations with resizable operand lists, but this property must
be indicated during the construction of such operations. It can be done
programmatically by calling a function on OperationState. Introduce an
ODS-internal trait `ResizableOperandList` to indicate such operations are use
it when generating the bodies of various `build` functions as well as the
`parse` function when the declarative assembly format is used.
Differential Revision: https://reviews.llvm.org/D78292
Summary:
This revision adds two utilities currently present in MLIR to LLVM StringExtras:
* convertToSnakeFromCamelCase
Convert a string from a camel case naming scheme, to a snake case scheme
* convertToCamelFromSnakeCase
Convert a string from a snake case naming scheme, to a camel case scheme
Differential Revision: https://reviews.llvm.org/D78167
This class implements a switch-like dispatch statement for a value of 'T' using dyn_cast functionality. Each `Case<T>` takes a callable to be invoked if the root value isa<T>, the callable is invoked with the result of dyn_cast<T>() as a parameter.
Differential Revision: https://reviews.llvm.org/D78070
These have proved incredibly useful for interleaving values between a range w.r.t to streams. After this revision, the mlir/Support/STLExtras.h is empty. A followup revision will remove it from the tree.
Differential Revision: https://reviews.llvm.org/D78067
Summary:
This revision adds generation of two utility methods during EnumGen:
```
llvm::Optional<EnumType> symbolizeEnum<EnumType>(llvm::StringRef)
<stringifyResult> stringifyEnum(EnumType);
```
This provides a generic interface for stringifying/symbolizing any enum that can be used in a template environment.
Differential Revision: https://reviews.llvm.org/D77937
Summary: ClassID is a bit janky right now as it involves passing a magic pointer around. This revision hides the internal implementation mechanism within a new class TypeID. This class is a value-typed wrapper around the original ClassID implementation.
Differential Revision: https://reviews.llvm.org/D77768
Summary: This hook allows for passes to specify the command line argument without the need for registration. More concretely this will allow for generating pass crash reproducers without needing to have the passes registered. This should remove the need for production tools to register passes, leaving that solely to development tools like mlir-opt.
Differential Revision: https://reviews.llvm.org/D77907
Summary: This revision adds support for specifying operands or results as "optional". This is a special case of variadic where the number of elements is either 0 or 1. Operands and results of this kind will have accessors generated using Value instead of the range types, making it more natural to interface with.
Differential Revision: https://reviews.llvm.org/D77863
Summary:
The string in the location is used to provide metadata for the fused location
or create a NamedLoc. This allows tagging individual locations to convey
additional rewrite information.
Differential Revision: https://reviews.llvm.org/D77840
Summary: 'it' may get invalidated when recursing into optional groups. This revision refactors the inner loop to avoid the need to compare the iterator after invalidation.
Differential Revision: https://reviews.llvm.org/D77686
Error messages for the custom assembly format are difficult to understand
because there are no line numbers. This happens because the assembly format
is parsed as a standalone line, separate from it's parent file, with no useful
location information. Fixing this properly probably requires quite a bit
of invasive plumbing through the SourceMgr, similar to how included files
are handled
This proposal is a less invasive short term solution. When generating an
error message we generate an additional note which at least properly describes
the operation definition the error occured in, if not the actual line number
of the assemblyFormat definition.
A typical message is like:
error: type of operand #0, named 'operand', is not buildable and a buildable type cannot be inferred
$operand type($result) attr-dict
^
/src/llvm-project/mlir/test/mlir-tblgen/op-format-spec.td:296:1: note: in custom assembly format for this operation
def ZCoverageInvalidC : TestFormat_Op<"variable_invalid_c", [{
^
note: suggest adding a type constraint to the operation or adding a 'type($operand)' directive to the custom assembly format
$operand type($result) attr-dict
^
Differential Revision: https://reviews.llvm.org/D77488
The messages are somewhat cryptic, since they are not complete sentences,
include lots of ambiguous words, like 'format' which are hard to parse,
and include names from the users code which may, or may not make sense in
the context of the message. Start to clean this up and provide some
guidance for fixes.
Also, add a test for one of the messages which didn't have a test at all.
Differential Revision: https://reviews.llvm.org/D77449
Summary:
This is much cleaner, and fits the same structure as many other tablegen backends. This was not done originally as the CRTP in the pass classes made it overly verbose/complex.
Differential Revision: https://reviews.llvm.org/D77367
Summary:
Add directive to indicate the location to give to op being created. This
directive is optional and if unused the location will still be the fused
location of all source operations.
Currently this directive only works with other op locations, reusing an
existing op location or a fusion of op locations. But doesn't yet support
supplying metadata for the FusedLoc.
Based off initial revision by antiagainst@ and effectively mirrors GlobalIsel
debug_locations directive.
Differential Revision: https://reviews.llvm.org/D77649
The rewriter generates a call to build that is not handled by opdef generator
and so will fail to compile. Also if this is a root node being replaced
(depth 0) then using the more generic build method in the rewrite suffices.
Summary: This revision adds support for marking the last region as variadic in the ODS region list with the VariadicRegion directive.
Differential Revision: https://reviews.llvm.org/D77455
Summary: The attribute grammar includes an optional trailing colon type, so for attributes without a constant buildable type this will generally lead to unexpected and undesired behavior. Given that, it's better to just error out on these cases.
Differential Revision: https://reviews.llvm.org/D77293
This slightly tweaks the generated code from:
#ifdef GEN_PASS_REGISTRATION
::mlir::registerPass("flag1", ...
::mlir::registerPass("flag2", ...
#endif // GEN_PASS_REGISTRATION
to:
#ifdef GEN_PASS_REGISTRATION
#define GEN_PASS_REGISTRATION_Pass1
#define GEN_PASS_REGISTRATION_Pass2
#endif // GEN_PASS_REGISTRATION
#ifdef GEN_PASS_REGISTRATION_Pass1
::mlir::registerPass("flag1", ...
#endif
#ifdef GEN_PASS_REGISTRATION_Pass1
::mlir::registerPass("flag2", ...
#endif
That way the generated code can be included by defining the
`GEN_PASS_REGISTRATION` macro as currenty and register all the passes,
but one can also define only `GEN_PASS_REGISTRATION_Pass1` to register a
subset of the passes.
Differential Revision: https://reviews.llvm.org/D77322
Summary:
This revision adds support for auto-generating pass documentation, replacing the need to manually keep Passes.md up-to-date. This matches the behavior already in place for dialect and interface documentation.
Differential Revision: https://reviews.llvm.org/D76660
This revision adds support for generating utilities for passes such as options/statistics/etc. that can be inferred from the tablegen definition. This removes additional boilerplate from the pass, and also makes it easier to remove the reliance on the pass registry to provide certain things(e.g. the pass argument).
Differential Revision: https://reviews.llvm.org/D76659
This will greatly simplify a number of things related to passes:
* Enables generation of pass registration
* Enables generation of boiler plate pass utilities
* Enables generation of pass documentation
This revision focuses on adding the basic structure and adds support for generating the registration for passes in the Transforms/ directory. Future revisions will add more support and move more passes over.
Differential Revision: https://reviews.llvm.org/D76656
Summary:
This revisions performs several cleanups to the generated dialect documentation:
* Standardizes format of attributes/operands/results sections
* Splits out operation/type/dialect documentation generation to allow for composing generated and hand-written documentation
* Add section for declarative assembly syntax and successors
* General cleanup
Differential Revision: https://reviews.llvm.org/D76573
Summary:
This adds support in RewriterGen for calling into the new `PatternRewriter::notifyMatchFailure` hook. This lets derived pattern rewriters display this information to users, an example from DialectConversion is shown below:
```
Legalizing operation : 'std.and'(0x60e0000066a0) {
* Fold {
} -> FAILURE : unable to fold
* Pattern : 'std.and -> (spv.BitwiseAnd)' {
** Failure : operand 0 of op 'std.and' failed to satisfy constraint: '8/16/32/64-bit integer or vector of 8/16/32/64-bit integer values of length 2/3/4'
} -> FAILURE : pattern failed to match
* Pattern : 'std.and -> (spv.LogicalAnd)' {
** Failure : operand 0 of op 'std.and' failed to satisfy constraint: 'bool or vector of bool values of length 2/3/4'
} -> FAILURE : pattern failed to match
} -> FAILURE : no matched legalization pattern
```
Differential Revision: https://reviews.llvm.org/D76335
Summary: This adds bitfields that map to the dialect attribute verifier hooks. This also moves over the Test dialect to have its declaration generated.
Differential Revision: https://reviews.llvm.org/D76254
Summary: This generates the class declarations for dialects using the existing 'Dialect' tablegen classes.
Differential Revision: https://reviews.llvm.org/D76185
Previously extensions and capabilities requirements are returned as
SmallVector<SmallVector>. It's an anti-pattern; this commit improves
a bit by returning as SmallVector<ArrayRef>. This is possible because
the internal sequence is always known statically (from the spec)
so that we can use a static constant array for it and get an ArrayRef.
Differential Revision: https://reviews.llvm.org/D75874
This was a previous experiment that didn't pan out and needs to be
replaced, given no current use or tests, deleting instead and can start
new version fresh.
HasNoSideEffect can now be implemented using the MemoryEffectInterface, removing the need to check multiple things for the same information. This also removes an easy foot-gun for users as 'Operation::hasNoSideEffect' would ignore operations that dynamically, or recursively, have no side effects. This also leads to an immediate improvement in some of the existing users, such as DCE, now that they have access to more information.
Differential Revision: https://reviews.llvm.org/D76036
The current mechanism for identifying is a bit hacky and extremely adhoc, i.e. we explicit check 1-result, 0-operand, no side-effect, and always foldable and then assume that this is a constant. Adding a trait adds structure to this, and makes checking for a constant much more efficient as we can guarantee that all of these things have already been verified.
Differential Revision: https://reviews.llvm.org/D76020
Summary:
New classes are added to ODS to enable specifying additional information on the arguments and results of an operation. These classes, `Arg` and `Res` allow for adding a description and a set of 'decorators' along with the constraint. This enables specifying the side effects of an operation directly on the arguments and results themselves.
Example:
```
def LoadOp : Std_Op<"load"> {
let arguments = (ins Arg<AnyMemRef, "the MemRef to load from",
[MemRead]>:$memref,
Variadic<Index>:$indices);
}
```
Differential Revision: https://reviews.llvm.org/D74440
Summary:
This revision removes all of the functionality related to successor operands on the core Operation class. This greatly simplifies a lot of handling of operands, as well as successors. For example, DialectConversion no longer needs a special "matchAndRewrite" for branching terminator operations.(Note, the existing method was also broken for operations with variadic successors!!)
This also enables terminator operations to define their own relationships with successor arguments, instead of the hardcoded "pass-through" behavior that exists today.
Differential Revision: https://reviews.llvm.org/D75318
This greatly simplifies the requirements for builders using this mechanism for managing variadic operands.
Differential Revision: https://reviews.llvm.org/D75317
This attribute details the segment sizes for operand groups within the operation. This revision add support for automatically populating this attribute in the declarative parser.
Differential Revision: https://reviews.llvm.org/D75315
This interface contains the necessary components to provide the same builtin behavior that terminators have. This will be used in future revisions to remove many of the hardcoded constraints placed on successors and successor operands. The interface initially contains three methods:
```c++
// Return a set of values corresponding to the operands for successor 'index', or None if the operands do not correspond to materialized values.
Optional<OperandRange> getSuccessorOperands(unsigned index);
// Return true if this terminator can have it's successor operands erased.
bool canEraseSuccessorOperand();
// Erase the operand of a successor. This is only valid to call if 'canEraseSuccessorOperand' returns true.
void eraseSuccessorOperand(unsigned succIdx, unsigned opIdx);
```
Differential Revision: https://reviews.llvm.org/D75314
This allows for simplifying OpDefGen, as well providing specializing accessors for the different successor counts. This mirrors the existing traits for operands and results.
Differential Revision: https://reviews.llvm.org/D75313
For ODS generated operations enable querying whether there is a derived
attribute with a given name.
Rollforward of commit 5aa57c2 without using llvm::is_contained.
This reverts commit 5aa57c2812.
The source code generated due to this ods change does not compile,
as it passes to few arguments to llvm::is_contained.
Originally, intrinsics generator for the LLVM dialect has been producing
customized code fragments for the translation of MLIR operations to LLVM IR
intrinsics. LLVM dialect ODS now provides a generalized version of the
translation code, parameterizable with the properties of the operation.
Generate ODS that uses this version of the translation code instead of
generating a new version of it for each intrinsic.
Differential Revision: https://reviews.llvm.org/D74893
This revision add support for formatting successor variables in a similar way to operands, attributes, etc.
Differential Revision: https://reviews.llvm.org/D74789
This revision add support in ODS for specifying the successors of an operation. Successors are specified via the `successors` list:
```
let successors = (successor AnySuccessor:$target, AnySuccessor:$otherTarget);
```
Differential Revision: https://reviews.llvm.org/D74783
This matches the '(print|parse)OptionalAttrDictWithKeyword' functionality provided by the assembly parser/printer.
Differential Revision: https://reviews.llvm.org/D74682
When operations have optional attributes, or optional operands(i.e. empty variadic operands), the assembly format often has an optional section to represent these arguments. This revision adds basic support for defining an "optional group" in the assembly format to support this. An optional group is defined by wrapping a set of elements in `()` followed by `?` and requires the following:
* The first element of the group must be either a literal or an operand argument.
- This is because the first element must be optionally parsable.
* There must be exactly one argument variable within the group that is marked as the anchor of the group. The anchor is the element whose presence controls whether the group should be printed/parsed. An element is marked as the anchor by adding a trailing `^`.
* The group must only contain literals, variables, and type directives.
- Any attribute variables may be used, but only optional attributes can be marked as the anchor.
- Only variadic, i.e. optional, operand arguments can be used.
- The elements of a type directive must be defined within the same optional group.
An example of this can be seen with the assembly format for ReturnOp, which has a variadic number of operands.
```
def ReturnOp : ... {
let arguments = (ins Variadic<AnyType>:$operands);
// We only print the operands+types if there are a non-zero number
// of operands.
let assemblyFormat = "attr-dict ($operands^ `:` type($operands))?";
}
```
Differential Revision: https://reviews.llvm.org/D74681
This allows for injecting type constraints that are not direct 1-1 mappings, for example when one type is equal to the element type of another. This allows for moving over several more parsers to the declarative form.
Differential Revision: https://reviews.llvm.org/D74648
Summary:
This trait takes three arguments: lhs, rhs, transformer. It verifies that the type of 'rhs' matches the type of 'lhs' when the given 'transformer' is applied to 'lhs'. This allows for adding constraints like: "the type of 'a' must match the element type of 'b'". A followup revision will add support in the declarative parser for using these equality constraints to port more c++ parsers to the declarative form.
Differential Revision: https://reviews.llvm.org/D74647
In some dialects, attributes may have default values that may be
determined only after shape inference. For example, attributes that
are dependent on the rank of the input cannot be assigned a default
value until the rank of the tensor is inferred.
While we can set attributes without explicit setters, referring to
the attributes via accessors instead of having to use the string
interface is better for compile time verification.
The proposed patch add one method per operation attribute that let us
set its value. The code is a very small modification of the existing
getter methods.
Differential Revision: https://reviews.llvm.org/D74143
Summary: This revision adds support to the declarative parser for formatting enum attributes in the symbolized form. It uses this new functionality to port several of the SPIRV parsers over to the declarative form.
Differential Revision: https://reviews.llvm.org/D74525
This revision adds support in the declarative assembly form for printing attributes with buildable types without the type, and moves several more parsers over to the declarative form.
Differential Revision: https://reviews.llvm.org/D74276
This revision makes sure that errors emitted outside of testing are treated as fatal errors. This avoids the current silent failures that occur when the format is invalid.
Summary:
Currently BuildableType is assumed to be preceded by a builder. This prevents constructing types that don't have a callable 'get' method with the builder. This revision reworks the format to be like attribute builders, i.e. by accepting $_builder within the format itself.
Differential Revision: https://reviews.llvm.org/D73736
Summary: This revision add support for accepting a few type constraints, e.g. AllTypesMatch, when inferring types for operands and results. This is used to remove the c++ parsers for several additional operations.
Differential Revision: https://reviews.llvm.org/D73735
Summary:
MLIR materializes various enumeration-based LLVM IR operands as enumeration
attributes using ODS. This requires bidirectional conversion between different
but very similar enums, currently hardcoded. Extend the ODS modeling of
LLVM-specific enumeration attributes to include the name of the corresponding
enum in the LLVM C++ API as well as the names of specific enumerants. Use this
new information to automatically generate the conversion functions between enum
attributes and LLVM API enums in the two-way conversion between the LLVM
dialect and LLVM IR proper.
Differential Revision: https://reviews.llvm.org/D73468
Summary:
This revision add support, and testing, for generating the parser and printer from the declarative operation format.
Differential Revision: https://reviews.llvm.org/D73406
Summary:
This is the first revision in a series that adds support for declaratively specifying the asm format of an operation. This revision
focuses solely on parsing the format. Future revisions will add support for generating the proper parser/printer, as well as
transitioning the syntax definition of many existing operations.
This was originally proposed here:
https://llvm.discourse.group/t/rfc-declarative-op-assembly-format/340
Differential Revision: https://reviews.llvm.org/D73405
Summary:
In some cases, one may want to use different names for C++ symbol of an
enumerand from its string representation. In particular, in the LLVM dialect
for, e.g., Linkage, we would like to preserve the same enumerand names as LLVM
API and the same textual IR form as LLVM IR, yet the two are different
(CamelCase vs snake_case with additional limitations on not being a C++
keyword).
Modify EnumAttrCaseInfo in OpBase.td to include both the integer value and its
string representation. By default, this representation is the same as C++
symbol name. Introduce new IntStrAttrCaseBase that allows one to use different
names. Exercise it for LLVM Dialect Linkage attribute. Other attributes will
follow as separate changes.
Differential Revision: https://reviews.llvm.org/D73362
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Summary:
LLVMIRIntrinsicGen is using LLVM_Op as the base class for intrinsics.
This works for LLVM intrinsics in the LLVM Dialect, but when we are
trying to convert custom intrinsics that originate from a custom
LLVM dialect (like NVVM or ROCDL) these usually have a different
"cppNamespace" that needs to be applied to these dialect.
These dialect specific characteristics (like "cppNamespace")
are typically organized by creating a custom op (like NVVM_Op or
ROCDL_Op) that passes the correct dialect to the LLVM_OpBase class.
It seems natural to allow LLVMIRIntrinsicGen to take that into
consideration when generating the conversion code from one of these
dialect to a set of target specific intrinsics.
Reviewers: rriddle, andydavis1, antiagainst, nicolasvasilache, ftynse
Subscribers: jdoerfert, mehdi_amini, jpienaar, burmako, shauheen, arpith-jacob, mgester, lucyrfox, aartbik, liufengdb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73233
Summary:
llvm::to_vector() accepts a Range value and not the pair of arguments
we are currently passing. Also we probably want the lowered LLVM
values in the vector, while operand_begin()/operand_end() on MLIR ops
returns MLIR types. lookupValues() seems the correct way to collect
such values.
Reviewers: rriddle, andydavis1, antiagainst, nicolasvasilache, ftynse
Subscribers: jdoerfert, mehdi_amini, jpienaar, burmako, shauheen, arpith-jacob, mgester, lucyrfox, liufengdb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73137
Summary:
Add method in ODS to specify verification for operations implementing a
OpInterface. Use this with infer type op interface to verify that the
inferred type matches the return type and remove special case in
TestPatterns.
This could also have been achieved by using OpInterfaceMethod but verify
seems pretty common and it is not an arbitrary method that just happened
to be named verifyTrait, so having it be defined in special way seems
appropriate/better documenting.
Differential Revision: https://reviews.llvm.org/D73122
Summary:
If an intrinsic has overloadable types like llvm_anyint_ty or
llvm_anyfloat_ty then to getDeclaration() we need to pass a list
of the types that are "undefined" essentially concretizing them.
This patch add support for deriving such types from the MLIR op
that has been matched.
Reviewers: andydavis1, ftynse, nicolasvasilache, antiagainst
Subscribers: mehdi_amini, rriddle, jpienaar, burmako, shauheen, arpith-jacob, mgester, lucyrfox, liufengdb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72974
For the generated builder taking in unwrapped attribute values,
if the argument is a string, we should avoid wrapping it in quotes;
otherwise we are always setting the string attribute to contain
the string argument's name. The quotes come from StrinAttr's
`constBuilderCall`, which is reasonable for string literals, but
not function arguments containing strings.
Differential Revision: https://reviews.llvm.org/D72977
Summary:
Generalize broadcastable trait to variadic operands. Update the
documentation that still talked about element type as part of
broadcastable trait (that bug was already fixed). Also rename
Broadcastable to ResultBroadcastableShape to be more explicit that the
trait affects the result shape (it is possible for op to allow
broadcastable operands but not have result shape that is broadcast
compatible with operands).
Doing some intermediate work to have getBroadcastedType take an optional
elementType as input and use that if specified, instead of the common
element type of type1 and type2 in this function.
Differential Revision: https://reviews.llvm.org/D72559
Introduce a new generator for MLIR tablegen driver that consumes LLVM IR
intrinsic definitions and produces MLIR ODS definitions. This is useful to
bulk-generate MLIR operations equivalent to existing LLVM IR intrinsics, such
as additional arithmetic instructions or NVVM.
A test exercising the generation is also added. It reads the main LLVM
intrinsics file and produces ODS to make sure the TableGen model remains in
sync with what is used in LLVM.
Differential Revision: https://reviews.llvm.org/D72926
This makes the local variable `implies` to have the correct
type to satisfy ArrayRef's constructor:
/*implicit*/ constexpr ArrayRef(const T (&Arr)[N])
Hopefully this should please GCC 5.
Differential Revision: https://reviews.llvm.org/D72924
In SPIR-V, when a new version is introduced, it is possible some
existing extensions will be incorporated into it so that it becomes
implicitly declared if targeting the new version. This affects
conversion target specification because we need to take this into
account when allowing what extensions to use.
For a capability, it may also implies some other capabilities,
for example, the `Shader` capability implies `Matrix` the capability.
This should also be taken into consideration when preparing the
conversion target: when we specify an capability is allowed, all
its recursively implied capabilities are also allowed.
This commit adds utility functions to query implied extensions for
a given version and implied capabilities for a given capability
and updated SPIRVConversionTarget to use them.
This commit also fixes a bug in availability spec. When a symbol
(op or enum case) can be enabled by an extension, we should drop
it's minimal version requirement. Being enabled by an extension
naturally means the symbol can be used by *any* SPIR-V version
as long as the extension is supported. The grammar still encodes
the 'version' field for such cases, but it should be interpreted
as a different way: rather than meaning a minimal version
requirement, it says the symbol becomes core at that specific
version.
Differential Revision: https://reviews.llvm.org/D72765
Summary:
* Add shaped container type interface which allows infering the shape, element
type and attribute of shaped container type separately. Show usage by way of
tensor type inference trait which combines the shape & element type in
infering a tensor type;
- All components need not be specified;
- Attribute is added to allow for layout attribute that was previously
discussed;
* Expand the test driver to make it easier to test new creation instances
(adding new operands or ops with attributes or regions would trigger build
functions/type inference methods);
- The verification part will be moved out of the test and to verify method
instead of ops implementing the type inference interface in a follow up;
* Add MLIRContext as arg to possible to create type for ops without arguments,
region or location;
* Also move out the section in OpDefinitions doc to separate ShapeInference doc
where the shape function requirements can be captured;
- Part of this would move to the shape dialect and/or shape dialect ops be
included as subsection of this doc;
* Update ODS's variable usage to match camelBack format for builder,
state and arg variables;
- I could have split this out, but I had to make some changes around
these and the inconsistency bugged me :)
Differential Revision: https://reviews.llvm.org/D72432
Thus far we can only generate the same set of methods even for
operations in different dialects. This is problematic for dialects that
want to generate additional operation class methods programmatically,
e.g., a special builder method or attribute getter method. Apparently
we cannot update the OpDefinitionsGen backend every time when such
a need arises. So this CL introduces a hook into the OpDefinitionsGen
backend to allow dialects to emit additional methods and traits to
operation classes.
Differential Revision: https://reviews.llvm.org/D72514
Previously we only check that each field is of the correct
mlir::Attribute subclass. This commit enhances to also consider
the attribute's types, by leveraging the constraints already
encoded in TableGen attribute definitions.
Reviewed By: rsuderman
Differential Revision: https://reviews.llvm.org/D72162
Summary:
This diff adds support to allow `linalg.generic` and
`linalg.indexed_generic` to take tensor input and output
arguments.
The subset of output tensor operand types must appear
verbatim in the result types after an arrow. The parser,
printer and verifier are extended to accomodate this
behavior.
The Linalg operations now support variadic ranked tensor
return values. This extension exhibited issues with the
current handling of NativeCall in RewriterGen.cpp. As a
consequence, an explicit cast to `SmallVector<Value, 4>`
is added in the proper place to support the new behavior
(better suggestions are welcome).
Relevant cleanups and name uniformization are applied.
Relevant invalid and roundtrip test are added.
Reviewers: mehdi_amini, rriddle, jpienaar, antiagainst, ftynse
Subscribers: burmako, shauheen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72022
Lots of SPIR-V ops take enum attributes and certain enum cases
need extra capabilities or extensions to be available. This commit
extends to allow specifying availability spec on enum cases.
Extra utility functions are generated for the corresponding enum
classes to return the availability requirement. The availability
interface implemention for a SPIR-V op now goes over all enum
attributes to collect the availability requirements.
Reviewed By: mravishankar
Differential Revision: https://reviews.llvm.org/D71947
for (const auto &x : llvm::zip(..., ...))
->
for (auto x : llvm::zip(..., ...))
The return type of zip() is a wrapper that wraps a tuple of references.
> warning: loop variable 'p' is always a copy because the range of type 'detail::zippy<detail::zip_shortest, ArrayRef<long> &, ArrayRef<long> &>' does not return a reference [-Wrange-loop-analysis]
SPIR-V has a few mechanisms to control op availability: version,
extension, and capabilities. These mechanisms are considered as
different availability classes.
This commit introduces basic definitions for modelling SPIR-V
availability classes. Specifically, an `Availability` class is
added to SPIRVBase.td, along with two subclasses: MinVersion
and MaxVersion for versioning. SPV_Op is extended to take a
list of `Availability`. Each `Availability` instance carries
information for generating op interfaces for the corresponding
availability class and also the concrete availability
requirements.
With the availability spec on ops, we can now auto-generate the
op interfaces of all SPIR-V availability classes and also
synthesize the op's implementations of these interfaces. The
interface generation is done via new TableGen backends
-gen-avail-interface-{decls|defs}. The op's implementation is
done via -gen-spirv-avail-impls.
Differential Revision: https://reviews.llvm.org/D71930
This is an initial step to refactoring the representation of OpResult as proposed in: https://groups.google.com/a/tensorflow.org/g/mlir/c/XXzzKhqqF_0/m/v6bKb08WCgAJ
This change will make it much simpler to incrementally transition all of the existing code to use value-typed semantics.
PiperOrigin-RevId: 286844725
This enables providing a default implementation of an interface method. This method is defined on the Trait that is attached to the operation, and thus has all of the same constraints and properties as any other interface method. This allows for interface authors to provide a conservative default implementation for certain methods, without requiring that all users explicitly define it. The default implementation can be specified via the argument directly after the interface method body:
StaticInterfaceMethod<
/*desc=*/"Returns whether two array of types are compatible result types for an op.",
/*retTy=*/"bool",
/*methodName=*/"isCompatibleReturnTypes",
/*args=*/(ins "ArrayRef<Type>":$lhs, "ArrayRef<Type>":$rhs),
/*methodBody=*/[{
return ConcreteOp::isCompatibleReturnTypes(lhs, rhs);
}],
/*defaultImplementation=*/[{
/// Returns whether two arrays are equal as strongest check for
/// compatibility by default.
return lhs == rhs;
}]
PiperOrigin-RevId: 286226054
Scope and Memory Semantics attributes need to be serialized as a
constant integer value and the <id> needs to be used to specify the
value. Fix the auto-generated SPIR-V (de)serialization to handle this.
PiperOrigin-RevId: 285849431
This is needed for calling the generator on a .td file that contains both OpInterface definitions and op definitions with DeclareOpInterfaceMethods<...> Traits.
PiperOrigin-RevId: 285465784
River Riddle