top-of-tree. Removed all local patches and llvm.zip.
The intent is that fron now on top-of-tree will
always build against LLVM/Clang top-of-tree, and
that problems building will be resolved as they
occur. Stable release branches of LLDB can be
constructed as needed and linked to specific release
branches of LLVM/Clang.
llvm-svn: 164563
not correctly store the contents of Objective-C
classes. This was due to a combination of
factors:
1) Types were only being completed if we were
looking inside them for specific ivars
(using FindExternalVisibleDeclsByName).
We now look the complete type up at every
FindExternalLexicalDecls.
2) Even if the types were completed properly,
ValueObjectConstResult overrode the type
of every ValueObject using the complete type
for its class from the debug information.
Superclasses of complete classes are not
guaranteed to be complete. Although "frame
variable" uses the debug information,
the expression parser does now piece together
complete types at every level (as described
in Bullet 1), so I provided a way for the
expression parser to prevent overriding.
3) Type sizes were being miscomputed by
ClangASTContext. It ignored the ISA pointer
and only counted fields. We now correctly
count the ISA in the size of an object.
<rdar://problem/12315386>
llvm-svn: 164333
it is unconditionally present now.
ObjectContainerBSDArchive::CreateInstance %z8.8x is not a valid printf arg specifier, %8.8zx would work
for size_t arg but this arg is addr_t. use %8.8llx and cast up to uint64_t.
ObjectFile::FindPlugin ditto.
DynamicRegisterInfo::SetRegisterInfo ifdef this function out if LLDB_DISABLE_PYTHON.
llvm-svn: 163599
Added a fix for incorrect dynamic typing. Before when asking if a C++ class could be dynamic, we would answer yes for incomplete C++ classes. This turned out to have issues where if a class was not virtual, yet had its first ivar be an instance of a virtual class, we would incorrectly say that a class was virtual and we would downcast it to be a pointer to the first ivar. We now ask the class to complete itself prior to answering the question. We need to test the effects on memory of this change prior to submission. It is the safest and best fix, but it does have a potential downside of higher memory consumption.
llvm-svn: 163014
Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()
Cleaned up header includes a bit as well.
llvm-svn: 162860
when you want to find the caller's saved pc, you look up the return address
register and use that. On arm, for instance, this would be the contents of
the link register (lr).
If the eh_frame CIE defines an RA, record that fact in the UnwindPlan.
When we're finding a saved register, if it's the pc, lok for the location
of the return address register instead.
<rdar://problem/12062310>
llvm-svn: 162167
Added new API to lldb::SBTypeMember for bitfields:
bool SBTypeMember::IsBitfield();
uint32_t SBTypeMember::GetBitfieldSizeInBits();
Also added new properties for easy access. Now SBTypeMember objects in python have a "fields" property for all type fields, "bases" for all direct bases, "vbases" for all virtual base classes and "members" for a combo of all three organized by bit offset. They all return a python list() of SBTypeMember objects. Usage:
(lldb) script
>>> t = lldb.target.FindFirstType("my_type")
>>> for field in t.fields:
... print field
>>> for vbase in t.vbases:
... print vbase
>>> for base in t.bases:
... print base
>>> for member in t.members:
... print member
Also added new "is_bitfield" property to the SBTypeMember objects that will return the result of SBTypeMember::IsBitfield(), and "bitfield_bit_size" which will return the result of SBTypeMember::GetBitfieldSizeInBits();
I also fixed "SBTypeMember::GetOffsetInBytes()" to return the correct byte offset.
llvm-svn: 161091
instructions, be sure to allocate new UnwindPlan::Row's each
time we push a row on to the UnwindPlan so we don't mutate
it any further.
(fallout from changing the UnwindPlan from having a vector
of Row's to having a vector of RowSP shared pointers.)
<rdar://problem/11997385>
llvm-svn: 161089
the state of the unwind instructions once the prologue has finished. If it hits an
early return epilogue in the middle of the function, re-instate the prologue after that
epilogue has completed so that we can still unwind for cases where the flow of control
goes past that early-return. <rdar://problem/11775059>
Move the UnwindPlan operator== definition into the .cpp file, expand the definition a bit.
Add some casts to a SBCommandInterpreter::HandleCompletion() log statement so it builds without
warning on 64- and 32-bit systems.
llvm-svn: 160337
a shared pointer to ease some memory management issues with a patch
I'm working on.
The main complication with using SPs for these objects is that most
methods that build up an UnwindPlan will construct a Row to a given
instruction point in a function, then add additional regsaves in
the next instruction point to that row and push it again. A little
care is needed to not mutate the previous instruction point's Row
once these are switched to being held behing shared pointers.
llvm-svn: 160214
UnwindPlans for a function. This specifically does not use any
previously-generated UnwindPlans so if any logging is performed
while creating the UnwindPlans, it will be repeated. This is
useful for when an lldb stack trace is not correct and you want
to gather diagnostic information from the user -- they can do
log enable -v lldb unwind, image show-unwind of the function, and
you'll get the full logging as the UnwindPlans are recreated.
llvm-svn: 160095
various other syntactic sugar work. Lambdas do
not due to some problems relocating code containing
lambdas. Rvalue references work when returned from
expressions, but need more testing.
llvm-svn: 156948
Add "--name" option to "image lookup" that will search both functions and symbols.
Also made all of the output from any of the "image lookup" commands be the same regardless of the lookup type (function name, symbol name, func or symbol, file and line, address, etc). The --verbose or -v option also will expand the results as needed and display things so they look the same.
llvm-svn: 156835
Fixed the DisassemblerLLVMC disassembler to parse more efficiently instead of parsing opcodes over and over. The InstructionLLVMC class now only reads the opcode in the InstructionLLVMC::Decode function. This can be done very efficiently for ARM and architectures that have fixed opcode sizes. For x64 it still calls the disassembler to get the byte size.
Moved the lldb_private::Instruction::Dump(...) function up into the lldb_private::Instruction class and it now uses the function that gets the mnemonic, operandes and comments so that all disassembly is using the same code.
Added StreamString::FillLastLineToColumn() to allow filling a line up to a column with a character (which is used by the lldb_private::Instruction::Dump(...) function).
Modified the Opcode::GetData() fucntion to "do the right thing" for thumb instructions.
llvm-svn: 156532
Switch over to the "*-apple-macosx" for desktop and "*-apple-ios" for iOS triples.
Also make the selection process for auto selecting platforms based off of an arch much better.
llvm-svn: 156354
<rdar://problem/11285931>
Use the DWARRF end prologue markers when trying to skip prologue instructions instead of blindly using the second line table address entry.
llvm-svn: 155600
the debug information individual Decls came from.
We've had a metadata infrastructure for a while,
which was intended to solve a problem we've since
dealt with in a different way. (It was meant to
keep track of which definition of an Objective-C
class was the "true" definition, but we now find
it by searching the symbols for the class symbol.)
The metadata is attached to the ExternalASTSource,
which means it has a one-to-one correspondence with
AST contexts.
I've repurposed the metadata infrastructure to
hold the object file and DIE offset for the DWARF
information corresponding to a Decl. There are
methods in ClangASTContext that get and set this
metadata, and the ClangASTImporter is capable of
tracking down the metadata for Decls that have been
copied out of the debug information into the
parser's AST context without using any additional
memory.
To see the metadata, you just have to enable the
expression log:
-
(lldb) log enable lldb expr
-
and watch the import messages. The high 32 bits
of the metadata indicate the index of the object
file in its containing DWARFDebugMap; I have also
added a log which you can use to track that mapping:
-
(lldb) log enable dwarf map
-
This adds 64 bits per Decl, which in my testing
hasn't turned out to be very much (debugging Clang
produces around 6500 Decls in my tests). To track
how much data is being consumed, I've also added a
global variable g_TotalSizeOfMetadata which tracks
the total number of Decls that have metadata in all
active AST contexts.
Right now this metadata is enormously useful for
tracking down bugs in the debug info parser. In the
future I also want to use this information to provide
more intelligent error messages instead of printing
empty source lines wherever Clang refers to the
location where something is defined.
llvm-svn: 154634
correctly if the setter/getter were not present
in the debug information. The fixes are as follows:
- We not only look for the method by its full name,
but also look for automatically-generated methods
when searching for a selector in an Objective-C
interface. This is necessary to find accessors.
- Extract the getter and setter name from the
DW_TAG_APPLE_Property declaration in the DWARF
if they are present; generate them if not.
llvm-svn: 154067
Fixed an issue where there were more than one way to get a CompileUnitSP created when using SymbolFileDWARF with SymbolFileDWARFDebugMap. This led to an assertion that would fire under certain conditions. Now there is only one way to create the compile unit and it will "do the right thing".
llvm-svn: 153908
Fixed an issue that could cause circular type parsing that will assert and kill LLDB.
Prior to this fix the DWARF parser would always create class types and not start their definitions (for both C++ and ObjC classes) until we were asked to complete the class later. When we had cases like:
class A
{
class B
{
};
};
We would alway try to complete A before specifying "A" as the decl context for B. Turns out we can just start the definition and still not complete the class since we can check the TagDecl::isCompleteDefinition() function. This only works for C++ types. This means we will not be pulling in the full definition of parent classes all the time and should help with our memory consumption and also reduce the amount of debug info we have to parse.
I also reduced redundant code that was checking in a lldb::clang_type_t was a possible C++ dynamic type since it was still completing the type, just to see if it was dynamic. This was fixed in another function that was checking for a type being dynamic as an ObjC or a C++ type, but there was dedicated fucntion for C++ that we missed.
llvm-svn: 153713
Jim Ingham