I think the intrinsics named 'avx512.mask.' should refer to the previous behavior of taking a mask argument in the intrinsic instead of using a 'select' or 'and' instruction in IR to accomplish the masking. This is more consistent with the goal that eventually we will have no intrinsics that have masking builtin. When we reach that goal, we should have no intrinsics named "avx512.mask".
llvm-svn: 335744
Masking first, prevents the extend from being combine with loads. Its also interfering with some vXi1 extraction code.
Differential Revision: https://reviews.llvm.org/D42679
llvm-svn: 326500
The test changes you can see are related to the changes in ReplaceNodeResults. Though shuffle-vs-trunc-512.ll does have a test that exercises the code in LowerBITCAST. Looks like the test output didn't change because DAG combining is able to clean up the resulting type legalization. Adding the custom hook just makes type legalization work less hard.
Differential Revision: https://reviews.llvm.org/D43447
llvm-svn: 325933
We swapped the operands and used setle, but I don't see any reason to do that. I think this is a holdover from SSE where we swap and the invert to use pcmpgt. But with AVX512 we don't want an invert so we won't use pcmpgt. So there's no need to swap.
llvm-svn: 325527
Summary:
Currently we only use min/max to help with ule/uge compares because it removes an invert of the result that would otherwise be needed. But we can also use it for ult/ugt compares if it will prevent the need for a sign bit flip needed to use pcmpgt at the cost of requiring an invert after the compare.
I also refactored the code so that the max/min code is self contained and does its own return instead of setting up a flag to manipulate the rest of the function's behavior.
Most of the test cases look ok with this. I did notice that we added instructions when one of the operands being sign flipped is a constant vector that we were able to constant fold the flip into.
I also noticed that sometimes the SSE min/max clobbers a register that is needed after the compare. This resulted in an extra move being inserted before the min/max to preserve the register. We could try to detect this and switch from min to max and change the compare operands to use the operand that gets reused in the compare.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42935
llvm-svn: 324842
Summary:
This patch changes the signature of the avx512 packed fp compare intrinsics to return a vXi1 vector and no longer take a mask as input. The casts to scalar type will now need to be explicit in the IR. The masking node will now be an explicit and in the IR.
This makes the intrinsic look much more similar to an fcmp instruction that we wish we could use for these but can't. We already use icmp instructions for integer compares.
Previously the lowering step of isel would turn the intrinsic into an X86 specific ISD node and a emit the masking nodes as well as some bitcasts. This means DAG combines can't see the vXi1 type until somewhat late, making it more difficult to combine out gpr<->mask transition sequences. By exposing the vXi1 type explicitly in the IR and initial SelectionDAG we give earlier DAG combines and even InstCombine the chance to see it and optimize it.
This should make any issues with gpr<->mask sequences the same between integer and fp. Meaning we only have to fix them once.
Reviewers: spatel, delena, RKSimon, zvi
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43137
llvm-svn: 324827
These used things like unsigned less than zero, which is always false because there is no unsigned number less than zero.
I plan to teach DAG combine to optimize these so need to stop using them.
llvm-svn: 324315
This reduces the number of transitions between k-registers and GPRs, reducing the number of instructions.
There's still some room for improvement to remove more transitions, but this is a good start.
llvm-svn: 324184
Discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html
In preparation for adding support for named vregs we are changing the sigil for
physical registers in MIR to '$' from '%'. This will prevent name clashes of
named physical register with named vregs.
llvm-svn: 323922
Previously we had to materialize all 1s in a register using vpternlog or pcmpeq and then xor with that. By using vpternlog directly we can do it in one operation.
This is implemented using isel patterns, but we should maybe consider creating a generalized vpternlog combiner.
llvm-svn: 323572
Summary:
For the most part its better to keep v32i1 as a mask type of a narrower width than trying to promote it to a ymm register.
I had to add some overrides to the methods that get the types for the calling convention so that we still use v32i8 for argument/return purposes.
There are still some regressions in here. I definitely saw some around shuffles. I think we probably should move vXi1 shuffle from lowering to a DAG combine where I think the extend and truncate we have to emit would be better combined.
I think we also need a DAG combine to remove trunc from (extract_vector_elt (trunc))
Overall this removes something like 13000 CHECK lines from lit tests.
Reviewers: zvi, RKSimon, delena, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42031
llvm-svn: 323201
This avoids having the result type stick around until lowering where we have to extend the setcc and insert a truncate. If we get the types converted early we can do more to optimize it.
llvm-svn: 322432
Summary:
There are few oddities that occur due to v1i1, v8i1, v16i1 being legal without v2i1 and v4i1 being legal when we don't have VLX. Particularly during legalization of v2i32/v4i32/v2i64/v4i64 masked gather/scatter/load/store. We end up promoting the mask argument to these during type legalization and then have to widen the promoted type to v8iX/v16iX and truncate it to get the element size back down to v8i1/v16i1 to use a 512-bit operation. Since need to fill the upper bits of the mask we have to fill with 0s at the promoted type.
It would be better if we could just have the v2i1/v4i1 types as legal so they don't undergo any promotion. Then we can just widen with 0s directly in a k register. There are no real v4i1/v2i1 instructions anyway. Everything is done on a larger register anyway.
This also fixes an issue that we couldn't implement a masked vextractf32x4 from zmm to xmm properly.
We now have to support widening more compares to 512-bit to get a mask result out so new tablegen patterns got added.
I had to hack the legalizer for widening the operand of a setcc a bit so it didn't try create a setcc returning v4i32, extract from it, then try to promote it using a sign extend to v2i1. Now we create the setcc with v4i1 if the original setcc's result type is v2i1. Then extract that and don't sign extend it at all.
There's definitely room for improvement with some follow up patches.
Reviewers: RKSimon, zvi, guyblank
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41560
llvm-svn: 321967
The CONCAT_VECTORS will be lowered to INSERT_SUBVECTOR later. In the modified cases this seems to be enough to trick a later DAG combine into running in a different order than allows the ANDs to be removed.
I'll admit this is a bit of a hack that happens to work, but using CONCAT_VECTORS is more consistent with other legalization code anyway.
llvm-svn: 321611
We end up using an i8 load via an isel pattern from v8i1 anyway. This just makes it more explicit. This seems to improve codgen in some cases and I'd like to kill off some of the load patterns.
llvm-svn: 321598
A couple places didn't use the same SDValue variables to connect everything all the way through.
I don't have a test case for a bug in insert into the lower bits of a non-zero, non-undef vector. Not sure the best way to create that. We don't create the case when lowering concat_vectors which is the main way to get insert_subvectors.
llvm-svn: 320790
This doesn't match the semantics of the extract_vector_elt operation. Nothing downstream knows the bits were zeroed so they still get masked or sign extended after the extrat anyway.
llvm-svn: 320723
A v32i1 CONCAT_VECTORS of v16i1 uses promotion to v32i8 to legalize the v32i1. This results in a bunch of extract_vector_elts and a build_vector that ultimately gets scalarized.
This patch checks to see if v16i8 is legal and inserts a any_extend to that so that we can concat v16i8 to v32i8 and avoid creating the extracts.
llvm-svn: 320674
We previously only supported inserting to the LSB or MSB where it was easy to zero to perform an OR to insert.
This change effectively extracts the old value and the new value, xors them together and then xors that single bit with the correct location in the original vector. This will cancel out the old value in the first xor leaving the new value in the position.
The way I've implemented this uses 3 shifts and two xors and uses an additional register. We can avoid the additional register at the cost of another shift.
llvm-svn: 320120
There's no v2i1 or v4i1 kshift, and v8i1 is only supported with AVXDQ. Isel has fake patterns to extend these types to native shifts, but makes no guarantees about the value of any bits shifted in when shifting right.
This patch promotes the vector to a type that supports a native shift first and only allows inserting into the msb of a native sized shift.
I've constructed this in a way that doesn't do the promotion if we're going to fallback to using a xmm/ymm/zmm shuffle. I think I have a plan to remove the shuffle fall back entirely. In which case we this can be simplified, but I wanted to fix the correctness issue first.
llvm-svn: 320081
Previously we used a wider element type and truncated. But its more efficient to keep the element type and drop unused elements.
If BWI isn't supported and we have a i16 or i8 type, we'll extend it to be i32 and still use a truncate.
llvm-svn: 319740
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
This reverts r317579, originally committed as r317100.
There is a design issue with marking CFI instructions duplicatable. Not
all targets support the CFIInstrInserter pass, and targets like Darwin
can't cope with duplicated prologue setup CFI instructions. The compact
unwind info emission fails.
When the following code is compiled for arm64 on Mac at -O3, the CFI
instructions end up getting tail duplicated, which causes compact unwind
info emission to fail:
int a, c, d, e, f, g, h, i, j, k, l, m;
void n(int o, int *b) {
if (g)
f = 0;
for (; f < o; f++) {
m = a;
if (l > j * k > i)
j = i = k = d;
h = b[c] - e;
}
}
We get assembly that looks like this:
; BB#1: ; %if.then
Lloh3:
adrp x9, _f@GOTPAGE
Lloh4:
ldr x9, [x9, _f@GOTPAGEOFF]
mov w8, wzr
Lloh5:
str wzr, [x9]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.lt LBB0_3
b LBB0_7
LBB0_2: ; %entry.if.end_crit_edge
Lloh6:
adrp x8, _f@GOTPAGE
Lloh7:
ldr x8, [x8, _f@GOTPAGEOFF]
Lloh8:
ldr w8, [x8]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.ge LBB0_7
LBB0_3: ; %for.body.lr.ph
Note the multiple .cfi_def* directives. Compact unwind info emission
can't handle that.
llvm-svn: 317726
Reland r317100 with minor fix regarding ComputeCommonTailLength function in
BranchFolding.cpp. Skipping top CFI instructions block needs to executed on
several more return points in ComputeCommonTailLength().
Original r317100 message:
"Correct dwarf unwind information in function epilogue for X86"
This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
- CFI instructions do not affect code generation
- Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Changed CFI instructions so that they:
- are duplicable
- are not counted as instructions when tail duplicating or tail merging
- can be compared as equal
Added CFIInstrInserter pass:
- analyzes each basic block to determine cfa offset and register valid at
its entry and exit
- verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
- inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
llvm-svn: 317579
Added TESTM and TESTNM to the list of instructions that already zeroing unused upper bits
and does not need the redundant shift left and shift right instructions afterwards.
Added a pattern for TESTM and TESTNM in iselLowering, so now icmp(neq,and(X,Y), 0) goes folds into TESTM
and icmp(eq,and(X,Y), 0) goes folds into TESTNM
This commit is a preparation for lowering the test and testn X86 intrinsics to IR.
Differential Revision: https://reviews.llvm.org/D38732
llvm-svn: 317465
This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
- CFI instructions do not affect code generation
- Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Changed CFI instructions so that they:
- are duplicable
- are not counted as instructions when tail duplicating or tail merging
- can be compared as equal
Added CFIInstrInserter pass:
- analyzes each basic block to determine cfa offset and register valid at
its entry and exit
- verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
- inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D35844
llvm-svn: 317100
Summary:
This suppresses the generation of .Lcfi labels in our textual assembler.
It was annoying that this generated cascading .Lcfi labels:
llc foo.ll -o - | llvm-mc | llvm-mc
After three trips through MCAsmStreamer, we'd have three labels in the
output when none are necessary. We should only bother creating the
labels and frame data when making a real object file.
This supercedes D38605, which moved the entire .seh_ implementation into
MCObjectStreamer.
This has the advantage that we do more checking when emitting textual
assembly, as a minor efficiency cost. Outputting textual assembly is not
performance critical, so this shouldn't matter.
Reviewers: majnemer, MatzeB
Subscribers: qcolombet, nemanjai, javed.absar, eraman, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D38638
llvm-svn: 315259
NFC.
Updated 8 regression tests to use -mattr instead of -mcpu flag as follows:
-mcpu=knl --> -mattr=+avx512f
-mcpu=skx --> -mattr=+avx512f,+avx512bw,+avx512vl,+avx512dq
The updates are as part of the preparation of a large commit to add all instruction scheduling for the SKX target.
Reviewers: delena, zvi, RKSimon
Differential Revision: https://reviews.llvm.org/D38222
Change-Id: I2381c9b5bb75ecacfca017243c22d054f6eddd14
llvm-svn: 314306
We use a v16i32/v16f32 compare instead and truncate the result. We already did this for the unmasked version, but were missing the version with 'and'.
llvm-svn: 314072
This enables the use of a smaller encoding by using a VEX instruction when possible.
Differential Revision: https://reviews.llvm.org/D37092
llvm-svn: 312100
This patch completely replaces the instruction scheduling information for the Haswell architecture target by modifying the file X86SchedHaswell.td located under the X86 Target.
We used the scheduling information retrieved from the Haswell architects in order to replace and modify the existing scheduling.
The patch continues the scheduling replacement effort started with the SNB target in r307529 and r310792.
Information includes latency, number of micro-Ops and used ports by each HSW instruction.
Please expect some performance fluctuations due to code alignment effects.
Reviewers: RKSimon, zvi, aymanmus, craig.topper, m_zuckerman, igorb, dim, chandlerc, aaboud
Differential Revision: https://reviews.llvm.org/D36663
llvm-svn: 311879
Add an X86 combine for TESTM when one of the operands is a BUILD_VECTOR(0,0,...).
TESTM op0, BUILD_VECTOR(0,0,...) -> BUILD_VECTOR(0,0,...)
TESTM BUILD_VECTOR(0,0,...), op1 -> BUILD_VECTOR(0,0,...)
Differential Revision:
https://reviews.llvm.org/D36536
llvm-svn: 310787
[X86][AVX512] Improve lowering of AVX512 compare intrinsics (remove redundant shift left+right instructions).
AVX512 compare instructions return v*i1 types.
In cases where the number of elements in the returned value are less than 8, clang adds zeroes to get a mask of v8i1 type.
Later on it's replaced with CONCAT_VECTORS, which then is lowered to many DAG nodes including insert/extract element and shift right/left nodes.
The fact that AVX512 compare instructions put the result in a k register and zeroes all its upper bits allows us to remove the extra nodes simply by copying the result to the required register class.
When lowering, identify these cases and transform them into an INSERT_SUBVECTOR node (marked legal), then catch this pattern in instructions selection phase and transform it into one avx512 cmp instruction.
Differential Revision: https://reviews.llvm.org/D33188
llvm-svn: 306402
AVX512 compare instructions return v*i1 types.
In cases where the number of elements in the returned value are less than 8, clang adds zeroes to get a mask of v8i1 type.
Later on it's replaced with CONCAT_VECTORS, which then is lowered to many DAG nodes including insert/extract element and shift right/left nodes.
The fact that AVX512 compare instructions put the result in a k register and zeroes all its upper bits allows us to remove the extra nodes simply by copying the result to the required register class.
When lowering, identify these cases and transform them into an INSERT_SUBVECTOR node (marked legal), then catch this pattern in instructions selection phase and transform it into one avx512 cmp instruction.
Differential Revision: https://reviews.llvm.org/D33188
llvm-svn: 305465
Craig Topper