Multiple ldr pseudoinstructions with the same constant value will
reuse the same constant pool entry. However, if the constant pool
is explicitly flushed with a .ltorg directive, we should not try
to reference constants in the previous pool any longer, since they
may be out of range.
This fixes assembling hand-written assembler source which repeatedly
loads the same constant value, across a binary size larger than the
pc-relative fixup range for ldr instructions (4096 bytes). Such
assembler source already uses explicit .ltorg instructions to emit
constant pools with regular intervals. However if we try to reuse
constants emitted in earlier pools, they end up out of range.
This makes the output of the testcase match what binutils gas does
(prior to this patch, it would fail to assemble).
Differential Revision: https://reviews.llvm.org/D32847
llvm-svn: 302416
Recently support was added for substituting one intruction for another by
negating or inverting the immediate, but ORR and ORN were missed so this patch
adds them.
This one is slightly different to the others in that ORN only exists in thumb,
so we only do the substitution in thumb.
Differential Revision: https://reviews.llvm.org/D32534
llvm-svn: 302224
In this patch, I introduce a new altmacro string delimiter.
This review is the second review in a series of four reviews.
(one for each altmacro feature: LOCAL, string delimiter, string '!' escape sign and absolute expression as a string '%' ).
In the alternate macro mode, you can delimit strings with matching angle brackets <..>
when using it as a part of calling macro arguments.
As described in the https://sourceware.org/binutils/docs-2.27/as/Altmacro.html
"<string>
You can delimit strings with matching angle brackets."
assumptions:
1. If an argument begins with '<' and ends with '>'. The argument is considered as a string.
2. Except adding new string mark '<..>', a regular macro behavior is expected.
3. The altmacro cannot affect the regular less/greater behavior.
4. If a comma is present inside an angle brackets it considered as a character and not as a separator.
Differential Revision: https://reviews.llvm.org/D32701
llvm-svn: 302135
That's only a required extension as of v8.1a.
Remove it from the "generic" CPU as well: it should only support the
base ISA (and binutils agrees).
Also unify the MC tests into crc.s and arm64-crc32.s
llvm-svn: 302077
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Reapplied - this time without changing line endings of existing files.
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302041
This patch adds support for the the LightWeight Profiling (LWP) instructions which are available on all AMD Bulldozer class CPUs (bdver1 to bdver4).
Differential Revision: https://reviews.llvm.org/D32769
llvm-svn: 302028
Remove "_NC" suffix and semantics from TLSDESC_LD{64,32}_LO12 and
TLSDESC_ADD_LO12 relocations
Rearrange ordering in AArch64.def to follow relocation encoding
Fix name:
R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC
Add support for several "TLS", "TLSGD", and "TLSLD" relocations for
ILP32
Fix return values from isNonILP32reloc
Add implementations for
R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC,
R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC,
R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC,
*TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC,
*TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC
Modify error messages to give name of equivalent relocation in the
ABI not being used, along with better checking for non-existent
requested relocations.
Added assembler support for "pg_hi21_nc"
Relocation definitions added without implementations:
R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21,
R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21,
R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC,
R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19,
R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL,
R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC
Fix encoding:
R_AARCH64_P32_TLSDESC_ADR_PAGE21
Reviewers: Peter Smith
Patch by: Joel Jones (jjones@cavium.com)
Differential Revision: https://reviews.llvm.org/D32072
llvm-svn: 301980
TLSDESC_ADD_LO12 relocations
Rearrange ordering in AArch64.def to follow relocation encoding
Fix name:
R_AARCH64_P32_LD64_GOT_LO12_NC => R_AARCH64_P32_LD32_GOT_LO12_NC
Add support for several "TLS", "TLSGD", and "TLSLD" relocations for
ILP32
Fix return values from isNonILP32reloc
Add implementations for
R_AARCH64_ADR_PREL_PG_HI21_NC, R_AARCH64_P32_LD32_GOT_LO12_NC,
R_AARCH64_P32_TLSIE_LD32_GOTTPREL_LO12_NC,
R_AARCH64_P32_TLSDESC_LD32_LO12, R_AARCH64_LD64_GOT_LO12_NC,
*TLSLD_LDST128_DTPREL_LO12, *TLSLD_LDST128_DTPREL_LO12_NC,
*TLSLE_LDST128_TPREL_LO12, *TLSLE_LDST128_TPREL_LO12_NC
Modify error messages to give name of equivalent relocation in the
ABI not being used, along with better checking for non-existent
requested relocations.
Added assembler support for "pg_hi21_nc"
Relocation definitions added without implementations:
R_AARCH64_P32_TLSDESC_ADR_PREL21, R_AARCH64_P32_TLSGD_ADR_PREL21,
R_AARCH64_P32_TLSGD_ADD_LO12_NC, R_AARCH64_P32_TLSLD_ADR_PREL21,
R_AARCH64_P32_TLSLD_ADR_PAGE21, R_AARCH64_P32_TLSLD_ADD_LO12_NC,
R_AARCH64_P32_TLSLD_LD_PREL19, R_AARCH64_P32_TLSDESC_LD_PREL19,
R_AARCH64_P32_TLSGD_ADR_PAGE21, R_AARCH64_P32_TLS_DTPREL,
R_AARCH64_P32_TLS_DTPMOD, R_AARCH64_P32_TLS_TPREL,
R_AARCH64_P32_TLSDESC
Fix encoding:
R_AARCH64_P32_TLSDESC_ADR_PAGE21
Reviewers: Peter Smith
Patch by: Joel Jones (jjones@cavium.com)
Differential Revision: https://reviews.llvm.org/D32072
llvm-svn: 301939
This is motivated by https://reviews.llvm.org/D32488 where I am trying
to add printing of the section type for incompatible sections to LLD
error messages. This patch allows us to use the same code in
llvm-readobj and LLD instead of duplicating the function inside LLD.
Patch by Alexander Richardson!
llvm-svn: 301921
r288279 mistakenly added it to all arches, but it's only available
from v8.1 onwards.
The testcase is awkward, because (I suspect) of PR32873.
Spotted by inspection.
llvm-svn: 301890
In this patch, I introduce a new alt macro feature.
This feature adds meaning for the % when using it as a prefix to the calling macro arguments.
In the altmacro mode, the percent sign '%' before an absolute expression convert the expression first to a string.
As described in the https://sourceware.org/binutils/docs-2.27/as/Altmacro.html
"Expression results as strings
You can write `%expr' to evaluate the expression expr and use the result as a string."
expression assumptions:
1. '%' can only evaluate an absolute expression.
2. Altmacro '%' must be the first character of the evaluated expression.
3. If no '%' is located before the expression, a regular module operation is expected.
4. The result of Absolute Expressions can be only integer.
Differential Revision: https://reviews.llvm.org/D32526
llvm-svn: 301797
In case of microMIPS mode %gottprel operator should emit microMIPS
relocation R_MICROMIPS_TLS_GOTTPREL, not R_MIPS_TLS_GOTTPREL.
Differential Revision: http://reviews.llvm.org/D32617
llvm-svn: 301763
Also, add test for data relocations and fix addend to
be signed.
Subscribers: jfb, dschuff
Differential Revision: https://reviews.llvm.org/D32513
llvm-svn: 301690
Summary of changes:
- corrected vmcnt, expcnt, lgkmcnt helpers to checks their argument for truncation;
- added saturated versions of these helpers.
See bug 32711 for details: https://bugs.llvm.org//show_bug.cgi?id=32711
Reviewers: artem.tamazov, vpykhtin
Differential Revision: https://reviews.llvm.org/D32546
llvm-svn: 301439
Instruction isb takes as an operand either 'sy' or an immediate value. This
improves the diagnostic when the string is not 'sy' and adds a test case for
this which was missing. This also adds tests to check invalid inputs for dsb
and dmb.
Differential Revision: https://reviews.llvm.org/D32227
llvm-svn: 301165
ChangeSection incorrectly registers LastEMSInfo as belonging to the previous
section, not the current section. This happens to work when changing sections
using .section, as the previous section is set to the current section before
the call to ChangeSection, but not when using .popsection.
Differential Revision: https://reviews.llvm.org/D32225
llvm-svn: 300831
Currently fmov #0 with a vector destination is handle incorrectly and results in
fmov #-1.9375 being emitted but should instead give an error. This is due to the
way we cope with fmov #0 with a scalar destination being an alias of fmov zr, so
fix this by actually doing it through an alias.
Differential Revision: https://reviews.llvm.org/D31949
llvm-svn: 300830
When an integer is used as an fp immediate we're failing to check the return
value of getFP64Imm, so invalid values are silently permitted. Fix this by
merging together the integer and real handling.
llvm-svn: 300828
In the assembler, we should emit build attributes based on the target
selected with command-line options. This matches the GNU assembler's
behaviour. We only do this for build attributes which describe the
hardware that is expected to be available, not the ones that describe
ABI compatibility.
This is done by moving some of the attribute emission code to
ARMTargetStreamer, so that it can be shared between the assembly and
code-generation code paths. Since the assembler only creates a
MCSubtargetInfo, not an ARMSubtarget, the code had to be changed to
check raw features, and not use the convenience functions in
ARMSubtarget.
If different attributes are later specified using the .eabi_attribute
directive, then they will take precedence, as happens when the same
.eabi_attribute is specified twice.
This must be enabled by an option, because we don't want to do this when
parsing inline assembly. The attributes would match the ones emitted at
the start of the file, so wouldn't actually change the emitted object
file, but the extra directives would be added to every inline assembly
block when emitting assembly, which we'd like to avoid.
The majority of the changes in the build-attributes.ll test are just
re-ordering the directives, because the hardware attributes are now
emitted before the ABI ones. However, I did fix one bug which I spotted:
Tag_CPU_arch_profile was not being emitted for v6M.
Differential revision: https://reviews.llvm.org/D31812
llvm-svn: 300547
The unused dummy src2_modifiers is missing, so it crashes
when trying to print it.
I tried to fully remove src2_modifiers, but there are some
irritations in the places where it is converted to mad since
it starts to require modifying use lists while iterating over
them.
llvm-svn: 299861
Introducing a new error to macro parameters' parsing:
currently, llvm-mc won't complain if a macro have two (or more) named params with the same name.
this behavior is false, as there's no merit in having some params sharing a name.
now, instead of tolerate such a phenomena - emit an appropriate error.
Differential Revision: https://reviews.llvm.org/D31674
llvm-svn: 299815
- corrected DS_GWS_* opcodes (see VI_Shader_Programming#16.pdf for detailed description)
- address operand is not used
- several opcodes have data operand
- all opcodes have offset modifier
- DS_AND_SRC2_B32: corrected typo in mnemo
- DS_WRAP_RTN_F32 replaced with DS_WRAP_RTN_B32
- added CI/VI opcodes:
- DS_CONDXCHG32_RTN_B64
- DS_GWS_SEMA_RELEASE_ALL
- added VI opcodes:
- DS_CONSUME
- DS_APPEND
- DS_ORDERED_COUNT
Differential Revision: https://reviews.llvm.org/D31707
llvm-svn: 299767
Martin Storsjo