- Fix formatting in `RegisterPasses.cpp`.
- `assert` tried to compare `isl::boolean` against `long`. Explicitly
construct `bool` from `isl::boolean`. This allows the implicit cast of
`bool` to `long.
llvm-svn: 304146
Certain affine memory accesses which we model today might contain products of
parameters which we might combined into a new parameter to be able to create an
affine expression that represents these memory accesses. Especially in the
context of OpenCL, this approach looses information as memory accesses such as
A[get_global_id(0) * N + get_global_id(1)] are assumed to be linear. We
correctly recover their multi-dimensional structure by assuming that parameters
that are the result of a function call at IR level likely are not parameters,
but indeed induction variables. The resulting access is now
A[get_global_id(0)][get_global_id(1)] for an array A[][N].
llvm-svn: 304075
Side-effect free function calls with only constant parameters can be easily
re-generated and consequently do not prevent us from modeling a SCEV. This
change allows array subscripts to reference function calls such as
'get_global_id()' as used in OpenCL.
We use the function name plus the constant operands to name the parameter. This
is possible as the function name is required and is not dropped in release
builds the same way names of llvm::Values are dropped. We also provide more
readable names for common OpenCL functions, to make it easy to understand the
polyhedral model we generate.
llvm-svn: 304074
Summary:
My goal is to make the newly added `AllowWholeFunctions` options more usable/powerful.
The changes to ScopBuilder.cpp are exclusively checks to prevent `Region.getExit()` from being dereferenced, since Top Level Regions (TLRs) don't have an exit block.
In ScopDetection's `isValidCFG`, I removed a check that disallowed ReturnInstructions to have return values. This might of course have been intentional, so I would welcome your feedback on this and maybe a small explanation why return values are forbidden. Maybe it can be done but needs more changes elsewhere?
The remaining changes in ScopDetection are simply to consider the AllowWholeFunctions option in more places, i.e. allow TLRs when it is set and once again avoid derefererncing `getExit()` if it doesn't exist.
Finally, in ScopHelper.cpp I extended `polly::isErrorBlock` to handle regions without exit blocks as well: The original check was if a given BasicBlock dominates all predecessors of the exit block. Therefore I do the same for TLRs by regarding all BasicBlocks terminating with a ReturnInst as predecessors of a "virtual" function exit block.
Patch by: Lukas Boehm
Reviewers: philip.pfaffe, grosser, Meinersbur
Reviewed By: grosser
Subscribers: pollydev, llvm-commits, bollu
Tags: #polly
Differential Revision: https://reviews.llvm.org/D33411
llvm-svn: 303790
Summary: This patch ports IslAst to the new PM. The change is mostly straightforward. The only major modification required is making IslAst move-only, to correctly manage the isl resources it owns.
Reviewers: grosser, Meinersbur
Reviewed By: grosser
Subscribers: nemanjai, pollydev, llvm-commits
Tags: #polly
Differential Revision: https://reviews.llvm.org/D33422
llvm-svn: 303622
At the time of code generation, an instruction with an llvm intrinsic is ignored
in copyBB. However, if the value of the instruction is used later in the
program, the value needs to be synthesized. However, this is causing some issues
with the instructions being generated in a hoisted basic block.
Removing llvm.expect from the list of ignored intrinsics fixes this bug.
This resolves http://llvm.org/PR32324.
Contributed-by: Annanay Agarwal <cs14btech11001@iith.ac.in>
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32992
llvm-svn: 303006
Summary: This is a proof of concept of how to port polly-passes to the new PassManager architecture. This approach works ootb for Function-Passes, but might not be directly applicable to Scop/Region-Passes. While we could just run the Analyses/Transforms over functions instead, we'd surrender the nice pipelining behaviour we have now.
Reviewers: Meinersbur, grosser
Reviewed By: grosser
Subscribers: pollydev, sanjoy, nemanjai, llvm-commits
Tags: #polly
Differential Revision: https://reviews.llvm.org/D31459
llvm-svn: 302902
Summary:
When compiling for GPU, one can now choose to compile for OpenCL or CUDA,
with the corresponding polly-gpu-runtime flag (libopencl / libcudart). The
GPURuntime library (GPUJIT) has been extended with the OpenCL Runtime library
for that purpose, correctly choosing the corresponding library calls to the
option chosen when compiling (via different initialization calls).
Additionally, a specific GPU Target architecture can now be chosen with -polly-gpu-arch (only nvptx64 implemented thus far).
Reviewers: grosser, bollu, Meinersbur, etherzhhb, singam-sanjay
Reviewed By: grosser, Meinersbur
Subscribers: singam-sanjay, llvm-commits, pollydev, nemanjai, mgorny, yaxunl, Anastasia
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32431
llvm-svn: 302379
Extend the Knowledge class to store information about the contents
of array elements and which values are written. Two knowledges do
not conflict the known content is the same. The content information
if computed from writes to and loads from the array elements, and
represented by "ValInst": isl spaces that compare equal if the value
represented is the same.
Differential Revision: https://reviews.llvm.org/D31247
llvm-svn: 302339
This reverts commit 17a84e414adb51ee375d14836d4c2a817b191933.
Patches should have been submitted in the order of:
1. D32852
2. D32854
3. D32431
I mistakenly pushed D32431(3) first. Reverting to push in the correct
order.
llvm-svn: 302217
Summary:
When compiling for GPU, one can now choose to compile for OpenCL or CUDA,
with the corresponding polly-gpu-runtime flag (libopencl / libcudart). The
GPURuntime library (GPUJIT) has been extended with the OpenCL Runtime library
for that purpose, correctly choosing the corresponding library calls to the
option chosen when compiling (via different initialization calls).
Additionally, a specific GPU Target architecture can now be chosen with -polly-gpu-arch (only nvptx64 implemented thus far).
Reviewers: grosser, bollu, Meinersbur, etherzhhb, singam-sanjay
Reviewed By: grosser, Meinersbur
Subscribers: singam-sanjay, llvm-commits, pollydev, nemanjai, mgorny, yaxunl, Anastasia
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32431
llvm-svn: 302215
If a ScopStmt references a (scalar) value, there are multiple
possibilities where this value can come. The decision about what kind of
use it is must be handled consistently at different places, which can be
error-prone. VirtualUse is meant to centralize the handling of the
different types of value uses.
This patch makes ScopBuilder and CodeGeneration use VirtualUse. This
already helps to show inconsistencies with the value handling. In order
to keep this patch NFC, exceptions to the general rules are added.
These might be fixed later if they turn to problems. Overall, this
should result in fewer post-codegen IR-verification errors, but instead
assertion failures in `getNewValue` that are closer to the actual error.
Differential Revision: https://reviews.llvm.org/D32667
llvm-svn: 302157
LLVM-IR names are commonly available in debug builds, but often not in release
builds. Hence, using LLVM-IR names to identify statements or memory reference
results makes the behavior of Polly depend on the compile mode. This is
undesirable. Hence, we now just number the statements instead of using LLVM-IR
names to identify them (this issue has previously been brought up by Zino
Benaissa).
However, as LLVM-IR names help in making test cases more readable, we add an
option '-polly-use-llvm-names' to still use LLVM-IR names. This flag is by
default set in the polly tests to make test cases more readable.
This change reduces the time in ScopInfo from 32 seconds to 2 seconds for the
following test case provided by Eli Friedman <efriedma@codeaurora.org> (already
used in one of the previous commits):
struct X { int x; };
void a();
#define SIG (int x, X **y, X **z)
typedef void (*fn)SIG;
#define FN { for (int i = 0; i < x; ++i) { (*y)[i].x += (*z)[i].x; } a(); }
#define FN5 FN FN FN FN FN
#define FN25 FN5 FN5 FN5 FN5
#define FN125 FN25 FN25 FN25 FN25 FN25
#define FN250 FN125 FN125
#define FN1250 FN250 FN250 FN250 FN250 FN250
void x SIG { FN1250 }
For a larger benchmark I have on-hand (10000 loops), this reduces the time for
running -polly-scops from 5 minutes to 4 minutes, a reduction by 20%.
The reason for this large speedup is that our previous use of printAsOperand
had a quadratic cost, as for each printed and unnamed operand the full function
was scanned to find the instruction number that identifies the operand.
We do not need to adjust the way memory reference ids are constructured, as
they do not use LLVM values.
Reviewed by: efriedma
Tags: #polly
Differential Revision: https://reviews.llvm.org/D32789
llvm-svn: 302072
This commit switches Polly over to the isl::obj::foreach_* implementation, which
is part of the new isl bindings and follows the foreach pattern established in
Polly by Michael Kruse.
The original isl C function:
isl_stat isl_union_set_foreach_set(__isl_keep isl_union_set *uset,
isl_stat (*fn)(__isl_take isl_set *set, void *user), void *user);
which required the user to define a static callback function to which all
interesting parameters are passed via a 'void *' user-pointer, is on the
C++ side available as a function that takes a std::function<>, which can
carry any additional arguments without the need for a user pointer:
stat UnionSet::foreach_set(const std::function<stat(set)> &fn) const;
The following code illustrates the use of the new C++ interface:
auto Lambda = [=, &Result](isl::set Set) -> isl::stat {
auto Shifted = shiftDimension(Set, Pos, Amount);
Result = Result.add(Shifted);
return isl::stat::ok;
}
UnionSet.foreach_set(Lambda);
Polly had some specialized foreach functions which did not require the lambdas
to return a status flag. We remove these functions in this commit to move Polly
completely over to the new isl interface. We may in the future discuss if
functors without return values can be supported easily.
Another extension proposed by Michael Kruse is the use of C++ iterators to allow
the use of normal for loops to iterate over these sets. Such an extension would
allow us to further simplify the code.
Reviewed-by: Michael Kruse <llvm@meinersbur.de>
Differential Revision: https://reviews.llvm.org/D30620
llvm-svn: 300323
Add shiftDim and convertZoneToTimepoints overloads for isl maps.
Add distributeDomain, liftDomains and applyDomainRange functions.
These are going to be used in https://reviews.llvm.org/D31247
(Add known array contents to Knowledge)
llvm-svn: 298543
In the previous default ScopInfo applied the profitability heuristic for
scalar accesses (-polly-unprofitable-scalar-accs=true) and the
-polly-prune-unprofitable was disabled by default
(-polly-enable-prune-unprofitable=false) as that pruning was already done.
This changes switches the defaults to -polly-unprofitable-scalar-accs=true
-polly-enable-prune-unprofitable=false such that the scalar access
heuristic check is done by the pass. This allows passes between ScopInfo
and PruneUnprofitable to optimize away scalar accesses.
Without enabling such intermediate passes, there is no change in
behaviour of profitability checks in a PassManagerBuilder built
pass chain, but it allows us to cover this configuration with the
buildbots.
Suggested-by: Tobias Grosser <tobias@grosser.es>
llvm-svn: 298081
ScopInfo's normal profitability heuristic considers SCoPs where all
statements have scalar writes as not profitably optimizable and
invalidate the SCoP in that case. However, -polly-delicm and
-polly-simplify may be able to remove some of the scalar writes such
that the flag -polly-unprofitable-scalar-accs=false allows disabling
that part of the heuristic.
In cases where DeLICM (or other passes after ScopInfo) are not
successful in removing scalar writes, the SCoP is still not profitably
optimizable. The schedule optimizer would again try computing another
schedule, resulting in slower compilation.
The -polly-prune-unprofitable pass applies the profitability heuristic
again before the schedule optimizer Polly can still bail out even with
-polly-unprofitable-scalar-accs=false.
Differential Revision: https://reviews.llvm.org/D31033
llvm-svn: 298080
Introduce ScopStmt::getSurroundingLoop() to replace getFirstNonBoxedLoopFor.
getSurroundingLoop() returns the precomputed surrounding/first non-boxed
loop. Except in ScopDetection, the list of boxed loops is only used to
get the surrounding loop. getFirstNonBoxedLoopFor also requires LoopInfo
at every use which is not necessarily available everywhere where we may
want to use it.
Differential Revision: https://reviews.llvm.org/D30985
llvm-svn: 297899
This new pass removes unnecessary accesses and writes. It currently
supports 2 simplifications, but more are planned.
It removes write accesses that write a loaded value back to the location
it was loaded from. It is a typical artifact from DeLICM. Removing it
will get rid of bogus dependencies later in dependency analysis.
It also removes statements without side-effects. ScopInfo already
removes these, but the removal of unnecessary writes can result in
more side-effect free statements.
Differential Revision: https://reviews.llvm.org/D30820
llvm-svn: 297473
Over the last couple of months several authors of independent isl C++ bindings
worked together to jointly design an official set of isl C++ bindings which
combines their experience in developing isl C++ bindings. The new bindings have
been designed around a value pointer style interface and remove the need for
explicit pointer managenent and instead use C++ language features to manage isl
objects.
This commit introduces the smart-pointer part of the isl C++ bindings and
replaces the current IslPtr<T> classes, which served the very same purpose, but
had to be manually maintained. Instead, we now rely on automatically generated
classes for each isl object, which provide value_ptr semantics.
An isl object has the following smart pointer interface:
inline set manage(__isl_take isl_set *ptr);
class set {
friend inline set manage(__isl_take isl_set *ptr);
isl_set *ptr = nullptr;
inline explicit set(__isl_take isl_set *ptr);
public:
inline set();
inline set(const set &obj);
inline set &operator=(set obj);
inline ~set();
inline __isl_give isl_set *copy() const &;
inline __isl_give isl_set *copy() && = delete;
inline __isl_keep isl_set *get() const;
inline __isl_give isl_set *release();
inline bool is_null() const;
}
The interface and behavior of the new value pointer style classes is inspired
by http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2012/n3339.pdf, which
proposes a std::value_ptr, a smart pointer that applies value semantics to its
pointee.
We currently only provide a limited set of public constructors and instead
require provide a global overloaded type constructor method "isl::obj
isl::manage(isl_obj *)", which allows to convert an isl_set* to an isl::set by
calling 'S = isl::manage(s)'. This pattern models the make_unique() constructor
for unique pointers.
The next two functions isl::obj::get() and isl::obj::release() are taken
directly from the std::value_ptr proposal:
S.get() extracts the raw pointer of the object managed by S.
S.release() extracts the raw pointer of the object managed by S and sets the
object in S to null.
We additionally add std::obj::copy(). S.copy() returns a raw pointer refering
to a copy of S, which is a shortcut for "isl::obj(oldobj).release()", a
functionality commonly needed when interacting directly with the isl C
interface where all methods marked with __isl_take require consumable raw
pointers.
S.is_null() checks if S manages a pointer or if the managed object is currently
null. We add this function to provide a more explicit way to check if the
pointer is empty compared to a direct conversion to bool.
This commit also introduces a couple of polly-specific extensions that cover
features currently not handled by the official isl C++ bindings draft, but
which have been provided by IslPtr<T> and are consequently added to avoid code
churn. These extensions include:
- operator bool() : Conversion from objects to bool
- construction from nullptr_t
- get_ctx() method
- take/keep/give methods, which match the currently used naming
convention of IslPtr<T> in Polly. They just forward to
(release/get/manage).
- raw_ostream printers
We expect that these extensions are over time either removed or upstreamed to
the official isl bindings.
We also export a couple of classes that have not yet been exported in isl (e.g.,
isl::space)
As part of the code review, the following two questions were asked:
- Why do we not use a standard smart pointer?
std::value_ptr was a proposal that has not been accepted. It is consequently
not available in the standard library. Even if it would be available, we want
to expand this interface with a complete method interface that is conveniently
available from each managed pointer. The most direct way to achieve this is to
generate a specialiced value style pointer class for each isl object type and
add any additional methods to this class. The relevant changes follow in
subsequent commits.
- Why do we not use templates or macros to avoid code duplication?
It is certainly possible to use templates or macros, but as this code is
auto-generated there is no need to make writing this code more efficient. Also,
most of these classes will be specialized with individual member functions in
subsequent commits, such that there will be little code reuse to exploit. Hence,
we decided to do so at the moment.
These bindings are not yet officially part of isl, but the draft is already very
stable. The smart pointer interface itself did not change since serveral months.
Adding this code to Polly is against our normal policy of only importing
official isl code. In this case however, we make an exception to showcase a
non-trivial use case of these bindings which should increase confidence in these
bindings and will help upstreaming them to isl.
Tags: #polly
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D30325
llvm-svn: 297452
This pass allows writing the LLVM-IR just before and after the Polly
passes to a file.
Dumping the IR before Polly helps reproducing bugs that occur in code
generated by clang. It is the only reliable way to get the IR that
triggers a bug. The alternative is to emit the IR with
clang -c -emit-llvm -S -o dump.ll
then pass it through all optimization passes
opt dump.ll -basicaa -sroa ... -S -o optdump.ll
to then reproduce the error with
opt optdump.ll -polly-opt-isl -polly-codegen -analyze
However, the IR is not the same. -O3 uses a PassBuilder than creates passes
with different parameters than the default.
Dumping the IR after Polly is useful to compare a miscompilation with
a known-good configuration.
Differential Revision: https://reviews.llvm.org/D30788
llvm-svn: 297415
NonowningIslPtr<isl_X> was used as types of function parameters when the
function does not consume the isl object, i.e. an __isl_keep parameter.
The alternatives are:
1. IslPtr<isl_X>
This has additional calls to isl_X_copy and isl_X_free to
increase/decrease the reference counter even though not needed. The
caller already owns a reference to the isl object.
2. const IslPtr<isl_X>&
This does not change the reference counter, but requires an
additional load to get the pointer to the isl object (instead of just
passing the pointer itself).
Moreover, the compiler cannot rely on the constness of the pointer
and has to reload the pointer every time it writes to memory (unless
alias analysis such as TBAA says it is not possible).
The isl C++ bindings currently in development do not have an equivalent
to NonowningIslPtr and adding one would make the binding more
complicated and its advantage in performance is small. In order to
simplify the transition to these C++ bindings, remove NonowningIslPtr.
Change every former use of it to alternative 2 mentioned aboce
(const IslPtr<isl_X>&).
llvm-svn: 295998
This function has been extracted from the upcoming DeLICM patch
(https://reviews.llvm.org/D24716).
In contrast to computeReachingWrite and computeArrayUnused,
convertZoneToTimepoints implies a format for zones (ranges between timepoints).
Zones at the moment are unique to DeLICM, but convertZoneToTimepoints makes most
sense in conjunction with the previous two functions.
llvm-svn: 294094
Add some generally useful isl tools into a their own new ISLTools.cpp.
These are the helpers were extracted from and will be use by the DeLICM
algorithm (https://reviews.llvm.org/D24716).
Suggested-by: Tobias Grosser <tobias@grosser.es>
llvm-svn: 293340
Move the function getFirstNonBoxedLoopFor which is used in ScopBuilder
and in ScopInfo to Support/ScopHelpers to make it reusable in other
locations. No functionality change.
Patch by Sameer Abu Asal.
Differential Revision: https://reviews.llvm.org/D28754
llvm-svn: 292168
Add and implement foreachElt for isl_map, isl_set and isl_union_set. These are
used by an out-of-tree patch which is in process of being upstreamed.
llvm-svn: 288924
Add traits for isl_id and isl_multi_aff, required by out-of-tree patches
currently in progress of upstreaming.
isl_union_pw_aff_dump has been added to ISL during one of the last ISL
updates, such that we can also enable its dump() trait.
llvm-svn: 288915
Unsigned operations are often useful to support but the heuristics are
not yet tuned. This options allows to disable them if necessary.
llvm-svn: 288521
Add an empty DeLICM pass, without any functional parts.
Extracting the boilerplate from the the functional part reduces the size of the
code to review (https://reviews.llvm.org/D24716)
Suggested-by: Tobias Grosser <tobias@grosser.es>
llvm-svn: 288160
Do not assume a load to be hoistable/invariant if the pointer is used by
another instruction in the SCoP that might write to memory and that is
always executed.
llvm-svn: 287272
The declaration as an "error block" is currently aggressive and not very
smart. This patch allows to disable error blocks completely. This might
be useful to prevent SCoP expansion to a point where the assumed context
becomes infeasible, thus the SCoP has to be discarded.
llvm-svn: 287271
In r286430 "SCEVValidator: add new parameters resulting from constant
extraction" we added functionality to scan for parameters after constant
extraction has taken place to ensure newly created parameters are correctly
registered. This addition made the already existing registration of parameters
redundant. Hence, we remove the corresponding call in this commit.
An alternative solution would have been to also perform constant extraction when
validating SCEV expressions and to then scan for parameters when validating
a SCEV expression. However, as SCEV validation is used during SCoP detection
where we want to be especially fast, adding additional functionality on this
hot path should be avoided if good alternatives exist. In this case, we can
choose to continue to only transform SCEV expression when actually modeling
them. As all transformations we perform are expected to not change the validity
of the SCEV expressions, this solution seems preferable.
Suggested-by: Eli Friedman <efriedma@codeaurora.org>
llvm-svn: 286780
Assumptions can either be added for a given basic block, in which case the set
describing the assumptions is expected to match the dimensions of its domain.
In case no basic block is provided a parameter-only set is expected to describe
the assumption.
The piecewise expressions that are generated by the SCEVAffinator sometimes
have a zero-dimensional domain (e.g., [p] -> { [] : p <= -129 or p >= 128 }),
which looks similar to a parameter-only domain, but is still a set domain.
This change adds an assert that checks that we always pass parameter domains to
addAssumptions if BB is empty to make mismatches here fail early.
We also change visitTruncExpr to always convert to parameter sets, if BB is
null. This change resolves http://llvm.org/PR30941
Another alternative to this change would have been to inspect all code to make
sure we directly generate in the SCEV affinator parameter sets in case of empty
domains. However, this would likely complicate the code which combines parameter
and non-parameter domains when constructing a statement domain. We might still
consider doing this at some point, but as this likely requires several non-local
changes this should probably be done as a separate refactoring.
Reported-by: Eli Friedman <efriedma@codeaurora.org>
llvm-svn: 286444
When extracting constant expressions out of SCEVs, new parameters may be
introduced, which have not been registered before. This change scans
SCEV expressions after constant extraction again to make sure newly
introduced parameters are registered.
We may for example extract the constant '8' from the expression '((8 * ((%a *
%b) + %c)) + (-8 * %a))' and obtain the expression '(((-1 + %b) * %a) + %c)'.
The new expression has a new parameter '(-1 + %b) * %a)', which was not
registered before, but must be registered to not crash.
This closes http://llvm.org/PR30953
Reported-by: Eli Friedman <efriedma@codeaurora.org>
llvm-svn: 286430
This makes polly generate a CFG which is closer to what we want
in LLVM IR, with a loop preheader for the original loop. This is
just a cleanup, but it exposes some fragile assumptions.
I'm not completely happy with the changes related to expandCodeFor;
RTCBB->getTerminator() is basically a random insertion point which
happens to work due to the way we generate runtime checks. I'm not
sure what the right answer looks like, though.
Differential Revision: https://reviews.llvm.org/D26053
llvm-svn: 285864
Integer math in LLVM IR is modular. Integer math in isl is
arbitrary-precision. Modeling LLVM IR math correctly in isl requires
either adding assumptions that math doesn't actually overflow, or
explicitly wrapping the math. However, expressions with the "nsw" flag
are special; we can pretend they're arbitrary-precision because it's
undefined behavior if the result wraps. SCEV expressions based on IR
instructions with an nsw flag also carry an nsw flag (roughly; actually,
the real rule is a bit more complicated, but the details don't matter
here).
Before this patch, SCEV flags were also overloaded with an additional
function: the ZExt code was mutating SCEV expressions as a hack to
indicate to checkForWrapping that we don't need to add assumptions to
the operand of a ZExt; it'll add explicit wrapping itself. This kind of
works... the problem is that if anything else ever touches that SCEV
expression, it'll get confused by the incorrect flags.
Instead, with this patch, we make the decision about whether to
explicitly wrap the math a bit earlier, basing the decision purely on
the SCEV expression itself, and not its users.
Differential Revision: https://reviews.llvm.org/D25287
llvm-svn: 284848
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
llvm-svn: 283671
gcc 5.4 insists on template specialization to be in a namespace polly { ... }
block, instead of being prefixed with 'polly::'. Error message:
root/src/llvm/tools/polly/lib/Support/GICHelper.cpp:203:54: error: specialization of ‘template<class T> void polly::IslPtr<T>::dump() const’ in different namespace [-fpermissive]
template <> void polly::IslPtr<isl_##TYPE>::dump() const { \
^
msvc14 and clang 3.8 did not complain.
llvm-svn: 282874
The dump() methods can be called from a debugger instead of e.g.
isl_*_dump(Var.Obj)
where Var is a variable of type IslPtr/NonowningIslPtr. To ensure that the
existence of the function pointers do not depdend on whether the methods are
used somwhere, they are declared with external linkage.
llvm-svn: 282870
The -polly-flatten-schedule pass reduces the number of scattering
dimensions in its isl_union_map form to make them easier to understand.
It is not meant to be used in production, only for debugging and
regression tests.
To illustrate, how it can make sets simpler, here is a lifetime set
used computed by the porposed DeLICM pass without flattening:
{ Stmt_reduction_for[0, 4] -> [0, 2, o2, o3] : o2 < 0;
Stmt_reduction_for[0, 4] -> [0, 1, o2, o3] : o2 >= 5;
Stmt_reduction_for[0, 4] -> [0, 1, 4, o3] : o3 > 0;
Stmt_reduction_for[0, i1] -> [0, 1, i1, 1] : 0 <= i1 <= 3;
Stmt_reduction_for[0, 4] -> [0, 2, 0, o3] : o3 <= 0 }
And here the same lifetime for a semantically identical one-dimensional
schedule:
{ Stmt_reduction_for[0, i1] -> [2 + 3i1] : 0 <= i1 <= 4 }
Differential Revision: https://reviews.llvm.org/D24310
llvm-svn: 280948
... to preserve reference counting logic.
In practice the missing assignment would not have caused any issues. We still
fix it as the code is wrong and it also causes noise in the clang static
analysis runs.
llvm-svn: 280946
We replace the options
-polly-code-generator=none
=isl
with the options
-polly-code-generation=none
=ast
=full
This allows us to measure the overhead of Polly itself, versus the compile
time increases due to us generating more IR and consequently the LLVM backends
spending more time on this IR.
We also use this opportunity to rename the option. The original name was
introduced at a point where we still had two code generators. CLooG and the
isl AST generator. Since we only have one AST generator left, there is no need
to distinguish between 'isl' and something else. However, being able to disable
code generation all together has been shown useful for debugging. Hence, we
rename and extend this option to make it a good fit for its new use case.
llvm-svn: 280554
LLVM's coding guideline suggests to not use @brief for one-sentence doxygen
comments to improve readability. Switch this once and for all to ensure people
do not copy @brief comments from other parts of Polly, when writing new code.
llvm-svn: 280468
The recent unit tests we gained made clear that the semantics of
isl_valFromAPInt are not clear, due to missing documentation. In this change we
document both the calling interface as well as the implementation of
isl_valFromAPInt.
We also make the implementation easier to read by removing integer wrappig in
abs() when passing in the minimal integer value for a given bitwidth. Even
though wrapping and subsequently interpreting the result as unsigned value gives
the correct result, this is far from obvious. Instead, we explicitly add one
more bit to the input type to ensure that abs will never wrap. This change did
not uncover a bug in the old implementation, but was introduced to increase
readability.
We update the tests to add a test case for this special case and use this
opportunity to also test a number larger than 64 bit. Finally, we order the
arguments of the test cases to make sure the expected output is first. This
helps readability in case of failing test cases as gtest assumes the first value
to be the exected value.
Reviewed-by: Michael Kruse <llvm@meinersbur.de>
Differential Revision: https://reviews.llvm.org/D23917
llvm-svn: 279815
The recent unit tests we gained made clear that the semantics of APIntFromVal
are not clear, due to missing documentation. In this change we document both
the calling interface as well as the implementation of APIntFromVal. We also
make the implementation easier to read by removing the use of magic numbers.
Finally, we add tests to check the bitwidth of the created values as well as
the correct modeling of very large numbers.
Reviewed-by: Michael Kruse <llvm@meinersbur.de>
Differential Revision: https://reviews.llvm.org/D23910
llvm-svn: 279813
The existing code would add the operands in the wrong order, and eventually
crash because the SCEV expression doesn't exactly match the parameter SCEV
expression in SCEVAffinator::visit. (SCEV doesn't sort the operands to
getMulExpr in general.)
Differential Revision: https://reviews.llvm.org/D23592
llvm-svn: 279087
Adding a new pass PolyhedralInfo. This pass will be the interface to Polly.
Initially, we will provide the following interface:
- #IsParallel(Loop *L) - return a bool depending on whether the loop is
parallel or not for the given program order.
Patch by Utpal Bora <cs14mtech11017@iith.ac.in>
Differential Revision: https://reviews.llvm.org/D21486
llvm-svn: 276637
This simplifies the upcoming patches to add code generation for ScopStmts. Load
hoisting support will later be added in a separate commit. This commit will
be implicitly tested by the subsequent GPGPU changes.
llvm-svn: 275969
Add a new pass to serve as basis for automatic accelerator mapping in Polly.
The pass structure and the analyses preserved are copied from
CodeGeneration.cpp, as we will rely on IslNodeBuilder and IslExprBuilder for
LLVM-IR code generation.
Polly's accelerator code generation is enabled with -polly-target=gpu
I would like to use this commit as opportunity to thank Yabin Hu for his work in
the context of two Google summer of code projects during which he implemented
initial prototypes of the Polly accelerator code generation -- in parts this
code is already available in todays Polly (e.g., tools/GPURuntime). More will
come as part of the upcoming Polly ACC changes.
Reviewers: Meinersbur
Subscribers: pollydev, llvm-commits
Differential Revision: http://reviews.llvm.org/D22036
llvm-svn: 275275
An assertion in visitSDivInstruction() checked whether the divisor is constant
by checking whether the argument is a ConstantInt. However, SCEVValidator allows
the divisor to be simplified to a constant by ScalarEvolution.
We synchronize the implementation of SCEVValidator and SCEVAffinator to both
accept simplified SCEV expressions.
llvm-svn: 275174
For llvm the memory accesses from nonaffine loops should be visible,
however for polly those nonaffine loops should be invisible/boxed.
This fixes llvm.org/PR28245
Cointributed-by: Huihui Zhang <huihuiz@codeaurora.org>
Differential Revision: http://reviews.llvm.org/D21591
llvm-svn: 274842
This function is used by both ScopInfo and ScopBuilder. A common
location for this function is required when ScopInfo and ScopBuilder are
separated into separate files in the next commit.
llvm-svn: 273981
This patch addresses:
- A new function pass to compute polyhedral dependences. This is
required to avoid the region pass manager.
- Stores a map of Scop to Dependence object for all the scops present
in a function. By default, access wise dependences are stored.
Patch by Utpal Bora <cs14mtech11017@iith.ac.in>
Differential Revision: http://reviews.llvm.org/D21105
llvm-svn: 273881
This patch adds a new function pass ScopInfoWrapperPass so that the
polyhedral description of a region, the SCoP, can be constructed and
used in a function pass.
Patch by Utpal Bora <cs14mtech11017@iith.ac.in>
Differential Revision: http://reviews.llvm.org/D20962
llvm-svn: 273856
llvm commonly adds a comment to the closing brace of a namespace to indicate
which namespace is closed. clang-tidy provides with llvm-namespace-comment
a handy tool to check for this habit. We use it to ensure we consitently use
namespace comments in Polly.
There are slightly different styles in how namespaces are closed in LLVM. As
there is no large difference between the different comment styles we go for the
style clang-tidy suggests by default.
To reproduce this fix run:
for i in `ls tools/polly/lib/*/*.cpp`; \
clang-tidy -checks='-*,llvm-namespace-comment' -p build $i -fix \
-header-filter=".*"; \
done
This cleanup was suggested by Eugene Zelenko <eugene.zelenko@gmail.com> in
http://reviews.llvm.org/D21488 and was split out to increase readability.
llvm-svn: 273621
IntToPtr and PtrToInt instructions are basically no-ops that we can handle as
such. In order to generate them properly as parameters we had to improve the
ScopExpander, though the change is the first in the direction of a more
aggressive scalar synthetization.
This patch was originally contributed by Johannes Doerfert in r271888, but was
in conflict with the revert in r272483. This is a recommit with some minor
adjustment to the test cases to take care of differing instruction names.
llvm-svn: 272485
The recent expression type changes still need more discussion, which will happen
on phabricator or on the mailing list. The precise list of commits reverted are:
- "Refactor division generation code"
- "[NFC] Generate runtime checks after the SCoP"
- "[FIX] Determine insertion point during SCEV expansion"
- "Look through IntToPtr & PtrToInt instructions"
- "Use minimal types for generated expressions"
- "Temporarily promote values to i64 again"
- "[NFC] Avoid unnecessary comparison for min/max expressions"
- "[Polly] Fix -Wunused-variable warnings (NFC)"
- "[NFC] Simplify min/max expression generation"
- "Simplify the type adjustment in the IslExprBuilder"
Some of them are just reverted as we would otherwise get conflicts. I will try
to re-commit them if possible.
llvm-svn: 272483
IntToPtr and PtrToInt instructions are basically no-ops that we can handle as
such. In order to generate them properly as parameters we had to improve the
ScopExpander, though the change is the first in the direction of a more
aggressive scalar synthetization.
llvm-svn: 271888
Created a new pass ScopInfoRegionPass. As name suggests, it is a
region pass and it is there to preserve compatibility with our
existing Polly passes. ScopInfoRegionPass will return a SCoP object
for a valid region while the creation of the SCoP stays in the
ScopInfo class.
Contributed-by: Utpal Bora <cs14mtech11017@iith.ac.in>
Reviewed-by: Tobias Grosser <tobias@grosser.es>,
Johannes Doerfert <doerfert@cs.uni-saarland.de>
Differential Revision: http://reviews.llvm.org/D20770
llvm-svn: 271259
Truncate operations are basically modulo operations, thus we can model
them that way. However, for large types we assume the operand to fit
in the new type size instead of introducing a modulo with a very large
constant.
llvm-svn: 269300
The assumption attached to an llvm.assume in the SCoP needs to be
combined with the domain of the surrounding statement but can
nevertheless be used to refine the context.
This fixes the problems mentioned in PR27067.
llvm-svn: 269060
This exposes the functionality to interpret a SCEV, or better the
piece-wise function created from the SCEV, as an unsigned value
instead of a signed one.
llvm-svn: 269044
The check for complexity compares the number of polyhedra in a set,
which are combined by disjunctions (union, "OR"),
not conjunctions (intersection, "AND").
llvm-svn: 268223
After zero-extend operations and unsigned comparisons we now allow
unsigned divisions. The handling is basically the same as for signed
division, except the interpretation of the operands. As the divisor
has to be constant in both cases we can simply interpret it as an
unsigned value without additional complexity in the representation.
For the dividend we could choose from the different representation
schemes introduced for zero-extend operations but for now we will
simply use an assumption.
llvm-svn: 268032
It does not suffice to take a global assumptions for unsigned comparisons but
we also need to adjust the invalid domain of the statements guarded by such
an assumption. To this end we allow to specialize the getPwAff call now in
order to indicate unsigned interpretation.
llvm-svn: 268025
When we materialize parameter SCEVs we did so without considering the
side effects they might have, e.g., both division and modulo are
undefined if the right hand side is zero. This is a problem because we
potentially extended the domain under which we evaluate parameters,
thus we might have introduced such undefined behaviour. To prevent
that from happening we will now guard divisions and modulo operations
in the parameters with a compare and select.
llvm-svn: 268023
Additive expressions can have constant factors too that we can extract
and thereby simplify the internal representation. For now we do
compute the gcd of all constant factors but only extract the same
(possibly negated) factor if there is one.
llvm-svn: 267445
A zero-extended value can be interpreted as a piecewise defined signed
value. If the value was non-negative it stays the same, otherwise it
is the sum of the original value and 2^n where n is the bit-width of
the original (or operand) type. Examples:
zext i8 127 to i32 -> { [127] }
zext i8 -1 to i32 -> { [256 + (-1)] } = { [255] }
zext i8 %v to i32 -> [v] -> { [v] | v >= 0; [256 + v] | v < 0 }
However, LLVM/Scalar Evolution uses zero-extend (potentially lead by a
truncate) to represent some forms of modulo computation. The left-hand side
of the condition in the code below would result in the SCEV
"zext i1 <false, +, true>for.body" which is just another description
of the C expression "i & 1 != 0" or, equivalently, "i % 2 != 0".
for (i = 0; i < N; i++)
if (i & 1 != 0 /* == i % 2 */)
/* do something */
If we do not make the modulo explicit but only use the mechanism described
above we will get the very restrictive assumption "N < 3", because for all
values of N >= 3 the SCEVAddRecExpr operand of the zero-extend would wrap.
Alternatively, we can make the modulo in the operand explicit in the
resulting piecewise function and thereby avoid the assumption on N. For the
example this would result in the following piecewise affine function:
{ [i0] -> [(1)] : 2*floor((-1 + i0)/2) = -1 + i0;
[i0] -> [(0)] : 2*floor((i0)/2) = i0 }
To this end we can first determine if the (immediate) operand of the
zero-extend can wrap and, in case it might, we will use explicit modulo
semantic to compute the result instead of emitting non-wrapping assumptions.
Note that operands with large bit-widths are less likely to be negative
because it would result in a very large access offset or loop bound after the
zero-extend. To this end one can optimistically assume the operand to be
positive and avoid the piecewise definition if the bit-width is bigger than
some threshold (here MaxZextSmallBitWidth).
We choose to go with a hybrid solution of all modeling techniques described
above. For small bit-widths (up to MaxZextSmallBitWidth) we will model the
wrapping explicitly and use a piecewise defined function. However, if the
bit-width is bigger than MaxZextSmallBitWidth we will employ overflow
assumptions and assume the "former negative" piece will not exist.
llvm-svn: 267408
The SCEVAffinator will now produce not only the isl representaiton of
a SCEV but also the domain under which it is invalid. This is used to
record possible overflows that can happen in the statement domains in
the statements invalid domain. The result is that invalid loads have
an accurate execution contexts with regards to the validity of their
statements domain. While the SCEVAffinator currently is only taking
"no-wrapping" assumptions, we can add more withouth worrying about the
execution context of loads that are optimistically hoisted.
llvm-svn: 267288
Utilizing the record option for assumptions we can simplify the wrapping
assumption generation a lot. Additionally, we can now report locations
together with wrapping assumptions, though they might not be accurate yet.
llvm-svn: 266069
In r247147 we disabled pointer expressions because the IslExprBuilder did not
fully support them. This patch reintroduces them by simply treating them as
integers. The only special handling for pointers that is left detects the
comparison of two address_of operands and uses an unsigned compare.
llvm-svn: 265894
This reverts commit 2879c53e80e05497f408f21ce470d122e9f90f94.
Additionally, it adds SDiv and SRem instructions to the set of values
discovered by the findValues function even if we add the operands to
be able to recompute the SCEVs. In subfunctions we do not want to
recompute SDiv and SRem instructions but pass them instead as they
might have been created through the IslExprBuilder and are more
complicated than simple SDiv/SRem instructions in the code.
llvm-svn: 265873
If ScalarEvolution cannot look through some expression but we do, it
might happen that a multiplication will arrive at the
SCEVAffinator::visitMulExpr. While we could always try to improve the
extractConstantFactor function we might still miss something, thus we
reintroduce the code to generate multiplicative piecewise-affine
functions as a fall-back.
llvm-svn: 265777
The findValues() function did not look through div & srem instructions
that were part of the argument SCEV. However, in different other
places we already look through it. This mismatch caused us to preload
values in the wrong order.
llvm-svn: 265775
This patch applies the restrictions on the number of domain conjuncts
also to the domain parts of piecewise affine expressions we generate.
To this end the wording is change slightly. It was needed to support
complex additions featuring zext-instructions but it also fixes PR27045.
lnt profitable runs reports only little changes that might be noise:
Compile Time:
Polybench/[...]/2mm +4.34%
SingleSource/[...]/stepanov_container -2.43%
Execution Time:
External/[...]/186_crafty -2.32%
External/[...]/188_ammp -1.89%
External/[...]/473_astar -1.87%
llvm-svn: 264514
Index calculations can use the last value that come out of a loop.
Ideally, ScalarEvolution can compute that exit value directly without
depending on the loop induction variable, but not in all cases.
This changes isAffine to not consider such loop exit values as affine to
avoid that SCEVExpander adds uses of the original loop induction
variable.
This fix is analogous to r262404 that applies to general uses of loop
exit values instead of index expressions and loop bouds as in this
patch.
This reduces the number of LNT test-suite fails with
-polly-position=before-vectorizer -polly-unprofitable
from 10 to 8.
llvm-svn: 262665
The scope will be required in the following fix. This commit separates
the large changes that do not change behaviour from the small, but
functional change.
llvm-svn: 262664
The LNT test suite with -polly-process-unprofitable
-polly-position=before-vectorizer currenty fails 59 tests. With this
barrier added, only 16 keep failing. This is probably because Polly's
code generation currently does not correctly preserve all analyses it
promised to preserve. Temporarily add this barrier until further
investigation.
llvm-svn: 262488
Polly recognizes affine loops that ScalarEvolution does not, in
particular those with loop conditions that depend on hoisted invariant
loads. Check for SCEVAddRec dependencies on such loops and do not
consider their exit values as synthesizable because SCEVExpander would
generate them as expressions that depend on the original induction
variables. These are not available in generated code.
llvm-svn: 262404
So far we separated constant factors from multiplications, however,
only when they are at the outermost level of a parameter SCEV. Now,
we also separate constant factors from the parameter SCEV if the
outermost expression is a SCEVAddRecExpr. With the changes to the
SCEVAffinator we can now improve the extractConstantFactor(...)
function at will without worrying about any other code part. Thus,
if needed we can implement a more comprehensive
extractConstantFactor(...) function that will traverse the SCEV
instead of looking only at the outermost level.
Four test cases were affected. One did not change much and the other
three were simplified.
llvm-svn: 260859
The previously implemented approach is to follow value definitions and
create write accesses ("push defs") while searching for uses. This
requires the same relatively validity- and requirement conditions to be
replicated at multiple locations (PHI instructions, other instructions,
uses by PHIs).
We replace this by iterating over the uses in a SCoP ("pull in
requirements"), and add writes only when at least one read has been
added. It turns out to be simpler code because each use is only iterated
over once and writes are added for the first access that reads it. We
need another iteration to identify escaping values (uses not in the
SCoP), which also makes the difference between such accesses more
obvious. As a side-effect, the order of scalar MemoryAccess can change.
Differential Revision: http://reviews.llvm.org/D15706
llvm-svn: 259987
MemAccInst wraps the common members of LoadInst and StoreInst. Also use
of this class in:
- ScopInfo::buildMemoryAccess
- BlockGenerator::generateLocationAccessed
- ScopInfo::addArrayAccess
- Scop::buildAliasGroups
- Replace every use of polly::getPointerOperand
Reviewers: jdoerfert, grosser
Differential Revision: http://reviews.llvm.org/D16530
llvm-svn: 258947
Use it to print "null" if a MemoryAccess's access relation is not
available instead of printing nothing.
Suggested-by: Johannes Doerfert
llvm-svn: 255466
Re-run canonicalization passes after Polly's code generation.
The set of passes currently added here are nearly all the passes between
--polly-position=early and --polly-position=before-vectorizer, i.e. all
passes that would usually run after Polly.
In order to run these only if Polly actually modified the code, we add a
function attribute "polly-optimzed" to a function that contains
generated code. The cleanup pass is skipped if the function does not
have this attribute.
There is no support by the (legacy) PassManager to run passes only under
some conditions. One could have wrapped all transformation passes to run
only when CodeGeneration changed the code, but the analyses would run
anyway. This patch creates an independent pass manager. The
disadvantages are that all analyses have to re-run even if preserved and
it does not honor compiler switches like the PassManagerBuilder does.
Differential Revision: http://reviews.llvm.org/D14333
llvm-svn: 254150
If an llvm.assume dominates the SCoP entry block and the assumed condition
can be expressed as an affine inequality we will now add it to the context.
Differential Revision: http://reviews.llvm.org/D14413
llvm-svn: 252851
Basic blocks that are always executed can not be error blocks as their execution
can not possibly be an unlikely event. In this commit we tighten the check
if an error block to basic blcoks that do not dominate the exit condition, but
that dominate all exiting blocks of the scop.
llvm-svn: 252726
r252713 introduced a couple of regressions due to later basic blocks refering
to instructions defined in error blocks which have not yet been modeled.
This commit is currently just encoding limitations of our modeling and code
generation backends to ensure correctness. In theory, we should be able to
generate and optimize such regions, as everything that is dominated by an error
region is assumed to not be executed anyhow. We currently just lack the code
to make this happen in practice.
llvm-svn: 252725
Remove all the implicit ilist iterator conversions from polly, in
preparation for making them illegal in ADT. There was one oddity I came
across: at line 95 of lib/CodeGen/LoopGenerators.cpp, there was a
post-increment `Builder.GetInsertPoint()++`.
Since it was a no-op, I removed it, but I admit I wonder if it might be
a bug (both before and after this change)? Perhaps it should be a
pre-increment?
llvm-svn: 252357
Polly can now be used as a analysis only tool as long as the code
generation is disabled. However, we do not have an alternative to the
independent blocks pass in place yet, though in the relevant cases
this does not seem to impact the performance much. Nevertheless, a
virtual alternative that allows the same transformations without
changing the input region will follow shortly.
llvm-svn: 250652
instead of llvm::PassManagerBuilder::EP_EarlyAsPossible. This will allow us
to run actual module passes in Polly's canonicalization sequence, but should
otherwise have only little impact.
llvm-svn: 250091
Helper functions in the BlockGenerators.h/cpp introduce dependences
from the frontend to the backend of Polly. As they are used in
ScopDetection, ScopInfo, etc. we move them to the ScopHelper file.
llvm-svn: 249919
This replaces the support for user defined error functions by a
heuristic that tries to determine if a call to a non-pure function
should be considered "an error". If so the block is assumed not to be
executed at runtime. While treating all non-pure function calls as
errors will allow a lot more regions to be analyzed, it will also
cause us to dismiss a lot again due to an infeasible runtime context.
This patch tries to limit that effect. A non-pure function call is
considered an error if it is executed only in conditionally with
regards to a cheap but simple heuristic.
llvm-svn: 249611
This patch allows invariant loads to be used in the SCoP description,
e.g., as loop bounds, conditions or in memory access functions.
First we collect "required invariant loads" during SCoP detection that
would otherwise make an expression we care about non-affine. To this
end a new level of abstraction was introduced before
SCEVValidator::isAffineExpr() namely ScopDetection::isAffine() and
ScopDetection::onlyValidRequiredInvariantLoads(). Here we can decide
if we want a load inside the region to be optimistically assumed
invariant or not. If we do, it will be marked as required and in the
SCoP generation we bail if it is actually not invariant. If we don't
it will be a non-affine expression as before. At the moment we
optimistically assume all "hoistable" (namely non-loop-carried) loads
to be invariant. This causes us to expand some SCoPs and dismiss them
later but it also allows us to detect a lot we would dismiss directly
if we would ask e.g., AliasAnalysis::canBasicBlockModify(). We also
allow potential aliases between optimistically assumed invariant loads
and other pointers as our runtime alias checks are sound in case the
loads are actually invariant. Together with the invariant checks this
combination allows to handle a lot more than LICM can.
The code generation of the invariant loads had to be extended as we
can now have dependences between parameters and invariant (hoisted)
loads as well as the other way around, e.g.,
test/Isl/CodeGen/invariant_load_parameters_cyclic_dependence.ll
First, it is important to note that we cannot have real cycles but
only dependences from a hoisted load to a parameter and from another
parameter to that hoisted load (and so on). To handle such cases we
materialize llvm::Values for parameters that are referred by a hoisted
load on demand and then materialize the remaining parameters. Second,
there are new kinds of dependences between hoisted loads caused by the
constraints on their execution. If a hoisted load is conditionally
executed it might depend on the value of another hoisted load. To deal
with such situations we sort them already in the ScopInfo such that
they can be generated in the order they are listed in the
Scop::InvariantAccesses list (see compareInvariantAccesses). The
dependences between hoisted loads caused by indirect accesses are
handled the same way as before.
llvm-svn: 249607
There have been various places where llvm::DenseMap<const llvm::Value *,
llvm::Value *> types have been defined, but all types have been expected to be
identical. We make this more clear by consolidating the different types and use
BlockGenerator::ValueMapT wherever there is a need for types to match
BlockGenerator::ValueMapT.
llvm-svn: 249264
The user can provide function names with
-polly-error-functions=name1,name2,name3
that will be treated as error functions. Any call to them is assumed
not to be executed.
This feature is mainly for developers to play around with the new
"error block" feature.
llvm-svn: 249098
Because we handle more than SCEV does it is not possible to rewrite an
expression on the top-level using the SCEVParameterRewriter only. With
this patch we will do the rewriting on demand only and also
recursively, thus not only on the top-level.
llvm-svn: 248916
This patch allows switch instructions with affine conditions in the
SCoP. Also switch instructions in non-affine subregions are allowed.
Both did not require much changes to the code, though there was some
refactoring needed to integrate them without code duplication.
In the llvm-test suite the number of profitable SCoPs increased from
135 to 139 but more importantly we can handle more benchmarks and user
inputs without preprocessing.
Differential Revision: http://reviews.llvm.org/D13200
llvm-svn: 248701
If we encounter a <nsw> tagged AddRec for a loop we know the trip count of
that loop has to be bounded or the semantics is undefined anyway. Hence, we
only need to add unbounded assumptions if no such AddRec is known.
llvm-svn: 248128
This will allow to generate non-wrap assumptions for integer expressions
that are part of the SCoP. We compare the common isl representation of
the expression with one computed with modulo semantic. For all parameter
combinations they are not equal we can have integer overflows.
The nsw flags are respected when the modulo representation is computed,
nuw and nw flags are ignored for now.
In order to not increase compile time to much, the non-wrap assumptions
are collected in a separate boundary context instead of the assumed
context. This helps compile time as the boundary context can become
complex and it is therefor not advised to use it in other operations
except runtime check generation. However, the assumed context is e.g.,
used to tighten dependences. While the boundary context might help to
tighten the assumed context it is doubtful that it will help in practice
(it does not effect lnt much) as the boundary (or no-wrap assumptions)
only restrict the very end of the possible value range of parameters.
PET uses a different approach to compute the no-wrap context, though lnt runs
have shown that this version performs slightly better for us.
llvm-svn: 247732
Due to the new domain generation, the SCoP keeps track of the domain
for all blocks, thus the SCEVAffinator can now work with blocks to avoid
duplication of the domains.
llvm-svn: 247731
Siddharth Bhat