If a stack spill location is overwritten by another spill instruction,
any variable locations pointing at that slot should be terminated. We
cannot rely on spills always being restored to registers or variable
locations being moved by a DBG_VALUE: the register allocator is entitled
to spill a value and then forget about it when it goes out of liveness.
To address this, scan for memory writes to spill locations, even those we
don't consider to be normal "spills". isSpillInstruction and
isLocationSpill distinguish the two now. After identifying spill
overwrites, terminate the open range, and insert a $noreg DBG_VALUE for
that variable.
Differential Revision: https://reviews.llvm.org/D66941
llvm-svn: 371193
The missing line added by this patch ensures that only spilt variable
locations are candidates for being restored from the stack. Otherwise,
register or constant-value information can be interpreted as a spill
location, through a union.
The added regression test replicates a scenario where this occurs: the
stack load from [rsp] causes the register-location DBG_VALUE to be
"restored" to rsi, when it should be left alone. See PR43058 for details.
Un x-fail a test that was suffering from this from a previous patch.
Differential Revision: https://reviews.llvm.org/D66895
llvm-svn: 370648
Summary:
Change LiveDebugValues so that it inserts entry values after the bundle
which contains the clobbering instruction. Previously it would insert
the debug value after the bundle head using insertAfter(), breaking the
bundle.
Reviewers: djtodoro, NikolaPrica, aprantl, vsk
Reviewed By: vsk
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D66888
llvm-svn: 370448
The missing line added by this patch ensures that only spilt variable
locations are candidates for being restored from the stack. Otherwise,
register or constant-value information can be interpreted as a spill
location, through a union.
The added regression test replicates a scenario where this occurs: the
stack load from [rsp] causes the register-location DBG_VALUE to be
"restored" to rsi, when it should be left alone. See PR43058 for details.
Un x-fail a test that was suffering from this from a previous patch.
Differential Revision: https://reviews.llvm.org/D66895
llvm-svn: 370334
The "join" method in LiveDebugValues does not attempt to join unseen
predecessor blocks if their out-locations aren't yet initialized, instead
the block should be re-visited later to see if any locations have changed
validity. However, because the set of blocks were all being "process"'d
once before "join" saw them, that logic in "join" was actually ignoring
legitimate out-locations on the first pass through. This meant that some
invalidated locations were not removed from the head of loops, allowing
illegal locations to persist.
Fix this by removing the run of "process" before the main join/process loop
in ExtendRanges. Now the unseen predecessors that "join" skips truly are
uninitialized, and we come back to the block at a later time to re-run
"join", see the @baz function added.
This also fixes another fault where stack/register transfers in the entry
block (or any other before-any-loop-block) had their tranfers initially
ignored, and were then never revisited. The MIR test added tests for this
behaviour.
XFail a test that exposes another bug; a fix for this is coming in D66895.
Differential Revision: https://reviews.llvm.org/D66663
llvm-svn: 370328
LiveDebugValues propagates variable locations between blocks by creating
new DBG_VALUE insts in the successors, then interpreting them when it
passes back through the block at a later time. However, this flushes out
any extra information about the location that LiveDebugValues holds: for
example, connections between variable locations such as discussed in
D65368. And as reported in PR42772 this causes us to lose track of the
fact that a spill-location is actually a spill, not a register location.
This patch fixes that by deferring the creation of propagated DBG_VALUEs
until after propagation has completed: instead location propagation occurs
only by sharing location ID numbers between blocks.
Differential Revision: https://reviews.llvm.org/D66412
llvm-svn: 369508
Currently the machine instruction sinker identifies DBG_VALUE insts that
also need to sink by comparing register numbers. Unfortunately this isn't
safe, because (after register allocation) a DBG_VALUE may read a register
that aliases what's being sunk. To fix this, identify the DBG_VALUEs that
need to sink by recording & examining their register units. Register units
gives us the following guarantee:
"Two registers overlap if and only if they have a common register unit"
[MCRegisterInfo.h]
Thus we can always identify aliasing DBG_VALUEs if the set of register
units read by the DBG_VALUE, and the register units of the instruction
being sunk, intersect. (MachineSink already uses classes like
"LiveRegUnits" for determining sinking validity anyway).
The test added checks for super and subregister DBG_VALUE reads of a sunk
copy being sunk as well.
Differential Revision: https://reviews.llvm.org/D58191
llvm-svn: 369247
LiveDebugVariables can coalesce ranges of variable locations across
multiple basic blocks. However when it recreates DBG_VALUE instructions,
it has to recreate one DBG_VALUE per block, otherwise it doesn't
represent the pre-regalloc layout and variable assignments can go missing.
This feature works -- however while mucking around with LiveDebugVariables,
I commented the relevant code it out and no tests failed. Thus, here's a
test that checks LiveDebugVariables preserves DBG_VALUEs across block
boundaries.
Differential Revision: https://reviews.llvm.org/D66347
llvm-svn: 369243
In r369026 we disabled spill-recognition in LiveDebugValues for anything
that has a complex expression. This is because it's hard to recover the
complex expression once the spill location is baked into it.
This patch re-enables spill-recognition and slightly adjusts the DBG_VALUE
insts that LiveDebugValues tracks: instead of tracking the last DBG_VALUE
for a variable, it tracks the last _unspilt_ DBG_VALUE. The spill-restore
code is then able to access and copy the original complex expression; but
the rest of LiveDebugValues has to be aware of the slight semantic shift,
and produce a new spilt location if a spilt location is propagated between
blocks.
The test added produces an incorrect variable location (see FIXME), which
will be the subject of future work.
Differential Revision: https://reviews.llvm.org/D65368
llvm-svn: 369092
This patch avoids a crash caused by DW_OP_LLVM_fragments being dropped
from DIExpressions by LiveDebugValues spill-restore code. The appearance
of a previously unseen fragment configuration confuses LDV, as documented
in PR42773, and reproduced by the test function this patch adds (Crashes
on a x86_64 debug build).
To avoid this, on spill restore, we now use fragment information from the
spilt-location-expression.
In addition, when spilling, we now don't spill any DBG_VALUE with a complex
expression, as it can't be safely restored and will definitely lead to an
incorrect variable location. The discussion of this is in D65368.
Differential Revision: https://reviews.llvm.org/D66284
llvm-svn: 369026
Summary:
When eliminating an unreachable block we must remove any call site
information for calls residing in the block.
This was originally found on a downstream target, and the attached x86
test case was produced by hand-modifying some MIR.
Reviewers: aprantl, asowda, NikolaPrica, djtodoro, ivanbaev, vsk
Reviewed By: NikolaPrica, vsk
Subscribers: vsk, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D64500
llvm-svn: 368566
Dump the DWARF information about call sites and call site parameters into
debug info sections.
The patch also provides an interface for the interpretation of instructions
that could load values of a call site parameters in order to generate DWARF
about the call site parameters.
([13/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60716
llvm-svn: 365467
Emit replacements for clobbered parameters location if the parameter
has unmodified value throughout the funciton. This is basic scenario
where we can use the debug entry values.
([12/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D58042
llvm-svn: 365444
This patch addresses PR41675, where a stack-pointer variable is dereferenced
too many times by its location expression, presenting a value on the stack as
the pointer to the stack.
The difference between a stack *pointer* DBG_VALUE and one that refers to a
value on the stack, is currently the indirect flag. However the DWARF backend
will also try to guess whether something is a memory location or not, based
on whether there is any computation in the location expression. By simply
prepending the stack offset to existing expressions, we can accidentally
convert a register location into a memory location, which introduces a
suprise (and unintended) dereference.
The solution is to add DW_OP_stack_value whenever we add a DIExpression
computation to a stack *pointer*. It's an implicit location computed on the
expression stack, thus needs to be flagged as a stack_value.
For the edge case where the offset is zero and the location could be a register
location, DIExpression::prepend will still generate opcodes, and thus
DW_OP_stack_value must still be added.
Differential Revision: https://reviews.llvm.org/D63429
llvm-svn: 364736
Emit replacements for clobbered parameters location if the parameter
has unmodified value throughout the funciton. This is basic scenario
where we can use the debug entry values.
([12/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D58042
llvm-svn: 364553
Once MIR code leaves SSA form and the liveness of a vreg is considered,
DBG_VALUE insts are able to refer to non-live vregs, because their
debug-uses do not contribute to liveness. This non-liveness becomes
problematic for optimizations like register coalescing, as they can't
``see'' the debug uses in the liveness analyses.
As a result registers get coalesced regardless of debug uses, and that can
lead to invalid variable locations containing unexpected values. In the
added test case, the first vreg operand of ADD32rr is merged with various
copies of the vreg (great for performance), but a DBG_VALUE of the
unmodified operand is blindly updated to the modified operand. This changes
what value the variable will appear to have in a debugger.
Fix this by changing any DBG_VALUE whose operand will be resurrected by
register coalescing to be a $noreg DBG_VALUE, i.e. give the variable no
location. This is an overapproximation as some coalesced locations are
safe (others are not) -- an extra domination analysis would be required to
work out which, and it would be better if we just don't generate non-live
DBG_VALUEs.
This fixes PR40010.
Differential Revision: https://reviews.llvm.org/D56151
llvm-svn: 364515
This patch changes MIR stack-id from an integer to an enum,
and adds printing/parsing support for this in MIR files. The default
stack-id '0' is now renamed to 'default'.
This should make MIR tests that have stack objects with different stack-ids
more descriptive. It also clarifies code operating on StackID.
Reviewers: arsenm, thegameg, qcolombet
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D60137
llvm-svn: 363533
This patch makes the LiveDebugValues pass consider fragments when propagating
DBG_VALUE insts between blocks, fixing PR41979. Fragment info for a variable
location is added to the open-ranges key, which allows distinct fragments to be
tracked separately. To handle overlapping fragments things become slightly
funkier. To avoid excessive searching for overlaps in the data-flow part of
LiveDebugValues, this patch:
* Pre-computes pairings of fragments that overlap, for each DILocalVariable
* During data-flow, whenever something happens that causes an open range to
be terminated (via erase), any fragments pre-determined to overlap are
also terminated.
The effect of which is that when encountering a DBG_VALUE fragment that
overlaps others, the overlapped fragments do not get propagated to other
blocks. We still rely on later location-list building to correctly handle
overlapping fragments within blocks.
It's unclear whether a mixture of DBG_VALUEs with and without fragmented
expressions are legitimate. To avoid suprises, this patch interprets a
DBG_VALUE with no fragment as overlapping any DBG_VALUE _with_ a fragment.
Differential Revision: https://reviews.llvm.org/D62904
llvm-svn: 363256
This commit reapplies r359426 (which was reverted in r360301 due to
performance problems) and rolls in D61940 to address the performance problem.
I've combined the two to avoid creating a span of slow-performance, and to
ease reverting if more problems crop up.
The summary of D61940: This patch removes the "ChangingRegs" facility in
DbgEntityHistoryCalculator, as its overapproximate nature can produce incorrect
variable locations. An unchanging register doesn't mean a variable doesn't
change its location.
The patch kills off everything that calculates the ChangingRegs vector.
Previously ChangingRegs spotted epilogues and marked registers as unchanging if
they weren't modified outside the epilogue, increasing the chance that we can
emit a single-location variable record. Without this feature,
debug-loc-offset.mir and pr19307.mir become temporarily XFAIL. They'll be
re-enabled by D62314, using the FrameDestroy flag to identify epilogues, I've
split this into two steps as FrameDestroy isn't necessarily supported by all
backends.
The logic for terminating variable locations at the end of a basic block now
becomes much more enjoyably simple: we just terminate them all.
Other test changes: inlined-argument.ll becomes XFAIL, but for a longer term.
The current algorithm for detecting that a variable has a single-location
doesn't work in this scenario (inlined function in multiple blocks), only other
bugs were making this test work. fission-ranges.ll gets slightly refreshed too,
as the location of "p" is now correctly determined to be a single location.
Differential Revision: https://reviews.llvm.org/D61940
llvm-svn: 362951
Variable's stack location can stretch longer than it should. If a
variable is placed at the stack in a some nested basic block its range
can be calculated to be up to the next occurrence of the variable's
DBG_VALUE, or up to the end of the function, thus covering a basic
blocks that should not be included in the variable’s location range.
This happens because the DbgEntityHistoryCalculator ends register
locations at the end of a basic block only if the variable’s location
register has been changed throughout the function, which is not the
case for the register used to reference stack objects.
This patch also tries to produce a single value location if the location
list builder managed to merge all the locations into one.
Reviewers: aprantl, dstenb, jmorse
Reviewed By: aprantl, dstenb, jmorse
Subscribers: djtodoro, ivanbaev, asowda
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D61600
llvm-svn: 362923
Summary:
When DwarfDebug::buildLocationList() encountered an undef debug value,
it would truncate all open values, regardless if they were overlapping or
not. This patch fixes so that it only does that for overlapping fragments.
This change unearthed a bug that I had introduced in D57511,
which I have fixed in this patch. The code in DebugHandlerBase that
changes labels for parameter debug values could break DwarfDebug's
assumption that the labels for the entries in the debug value history
are monotonically increasing. Before this patch, that bug could result
in location list entries whose ending address was lower than the
beginning address, and with the changes for undef debug values that this
patch introduces it could trigger an assertion, due to attempting to
emit location list entries with empty ranges. A reproducer for the bug
is added in param-reg-const-mix.mir.
Reviewers: aprantl, jmorse, probinson
Reviewed By: aprantl
Subscribers: javed.absar, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D62379
llvm-svn: 361820
as it was causing significant compile time regressions.
This reverts commit r359426 while we come up with testcases and additional ideas.
llvm-svn: 360301
This patch fixes PR40795, where constant-valued variable locations can
"leak" into blocks placed at higher addresses. The root of this is that
DbgEntityHistoryCalculator terminates all register variable locations at
the end of each block, but not constant-value variable locations.
Fixing this requires constant-valued DBG_VALUE instructions to be
broadcast into all blocks where the variable location remains valid, as
documented in the LiveDebugValues section of SourceLevelDebugging.rst,
and correct termination in DbgEntityHistoryCalculator.
Differential Revision: https://reviews.llvm.org/D59431
llvm-svn: 359426
Summary:
When calculating the debug value history, DbgEntityHistoryCalculator
would only keep track of register clobbering for the latest debug value
per inlined entity. This meant that preceding register-described debug
value fragments would live on until the next overlapping debug value,
ignoring any potential clobbering. This patch amends
DbgEntityHistoryCalculator so that it keeps track of all registers that
a inlined entity's currently live debug values are described by.
The DebugInfo/COFF/pieces.ll test case has had to be changed since
previously a register-described fragment would incorrectly outlive its
basic block.
The parent patch D59941 is expected to increase the coverage slightly,
as it makes sure that location list entries are inserted after clobbered
fragments, and this patch is expected to decrease it, as it stops
preceding register-described from living longer than they should. All in
all, this patch and the preceding patch has a negligible effect on the
output from `llvm-dwarfdump -statistics' for a clang-3.4 binary built
using the RelWithDebInfo build profile. "Scope bytes covered" increases
by 0.5%, and "variables with location" increases from 2212083 to
2212088, but it should improve the accuracy quite a bit.
This fixes PR40283.
Reviewers: aprantl, probinson, dblaikie, rnk, bjope
Reviewed By: aprantl
Subscribers: llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D59942
llvm-svn: 358073
Summary:
Currently the DbgValueHistorymap only keeps track of clobbered registers
for the last debug value that it has encountered. This could lead to
preceding register-described debug values living on longer in the
location lists than they should. See PR40283 for an example. This
patch does not introduce tracking of multiple registers, but changes
the DbgValueHistoryMap structure to allow for that in a follow-up
patch. This patch is not NFC, as it at least fixes two bugs in
DwarfDebug (both are covered in the new clobbered-fragments.mir test):
* If a debug value was clobbered (its End pointer set), the value would
still be added to OpenRanges, meaning that the succeeding location list
entries could potentially contain stale values.
* If a debug value was clobbered, and there were non-overlapping
fragments that were still live after the clobbering, DwarfDebug would
not create a location list entry starting directly after the
clobbering instruction. This meant that the location list could have
a gap until the next debug value for the variable was encountered.
Before this patch, the history map was represented by <Begin, End>
pairs, where a new pair was created for each new debug value. When
dealing with partially overlapping register-described debug values, such
as in the following example:
DBG_VALUE $reg2, $noreg, !1, !DIExpression(DW_OP_LLVM_fragment, 32, 32)
[...]
DBG_VALUE $reg3, $noreg, !1, !DIExpression(DW_OP_LLVM_fragment, 64, 32)
[...]
$reg2 = insn1
[...]
$reg3 = insn2
the history map would then contain the entries `[<DV1, insn1>, [<DV2, insn2>]`.
This would leave it up to the users of the map to be aware of
the relative order of the instructions, which e.g. could make
DwarfDebug::buildLocationList() needlessly complex. Instead, this patch
makes the history map structure monotonically increasing by dropping the
End pointer, and replacing that with explicit clobbering entries in the
vector. Each debug value has an "end index", which if set, points to the
entry in the vector that ends the debug value. The ending entry can
either be an overlapping debug value, or an instruction which clobbers
the register that the debug value is described by. The ending entry's
instruction can thus either be excluded or included in the debug value's
range. If the end index is not set, the debug value that the entry
introduces is valid until the end of the function.
Changes to test cases:
* DebugInfo/X86/pieces-3.ll: The range of the first DBG_VALUE, which
describes that the fragment (0, 64) is located in RDI, was
incorrectly ended by the clobbering of RAX, which the second
(non-overlapping) DBG_VALUE was described by. With this patch we
get a second entry that only describes RDI after that clobbering.
* DebugInfo/ARM/partial-subreg.ll: This test seems to indiciate a bug
in LiveDebugValues that is caused by it not being aware of fragments.
I have added some comments in the test case about that. Also, before
this patch DwarfDebug would incorrectly include a register-described
debug value from a preceding block in a location list entry.
Reviewers: aprantl, probinson, dblaikie, rnk, bjope
Reviewed By: aprantl
Subscribers: javed.absar, kristof.beyls, jdoerfert, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D59941
llvm-svn: 358072
Summary:
This avoids needing an isel pattern for each condition code. And it removes translation switches for converting between Jcc instructions and condition codes.
Now the printer, encoder and disassembler take care of converting the immediate. We use InstAliases to handle the assembly matching. But we print using the asm string in the instruction definition. The instruction itself is marked IsCodeGenOnly=1 to hide it from the assembly parser.
Reviewers: spatel, lebedev.ri, courbet, gchatelet, RKSimon
Reviewed By: RKSimon
Subscribers: MatzeB, qcolombet, eraman, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60228
llvm-svn: 357802
This indicates an intrinsic parameter is required to be a constant,
and should not be replaced with a non-constant value.
Add the attribute to all AMDGPU and generic intrinsics that comments
indicate it should apply to. I scanned other target intrinsics, but I
don't see any obvious comments indicating which arguments are intended
to be only immediates.
This breaks one questionable testcase for the autoupgrade. I'm unclear
on whether the autoupgrade is supposed to really handle declarations
which were never valid. The verifier fails because the attributes now
refer to a parameter past the end of the argument list.
llvm-svn: 355981
Summary:
This is a follow-up to D57510. This patch stops DebugHandlerBase from
changing the starting label for the first non-overlapping,
register-described parameter DBG_VALUEs to the beginning of the
function. That code did not consider what defined the registers, which
could result in the ranges for the debug values starting before their
defining instructions. We currently do not emit debug values for
constant values directly at the start of the function, so this code is
still useful for such values, but my intention is to remove the code
from DebugHandlerBase completely when we get there. One reason for
removing it is that the code violates the history map's ranges, which I
think can make it quite confusing when troubleshooting.
In D57510, PrologEpilogInserter was amended so that parameter DBG_VALUEs
now are kept at the start of the entry block, even after emission of
prologue code. That was done to reduce the degradation of debug
completeness from this patch. PR40638 is another example, where the
lexical-scope trimming that LDV does, in combination with scheduling,
results in instructions after the prologue being left without locations.
There might be other cases where the DBG_VALUEs are pushed further down,
for which the DebugHandlerBase code may be helpful, but as it now quite
often result in incorrect locations, even after the prologue, it seems
better to remove that code, and try to work our way up with accurate
locations.
In the long run we should maybe not aim to provide accurate locations
inside the prologue. Some single location descriptions, at least those
referring to stack values, generate inaccurate values inside the
epilogue, so we maybe should not aim to achieve accuracy for location
lists. However, it seems that we now emit line number programs that can
result in GDB and LLDB stopping inside the prologue when doing line
number stepping into functions. See PR40188 for more information.
A summary of some of the changed test cases is available in PR40188#c2.
Reviewers: aprantl, dblaikie, rnk, jmorse
Reviewed By: aprantl
Subscribers: jdoerfert, jholewinski, jvesely, javed.absar, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D57511
llvm-svn: 353928
The LiveDebugValues pass recognizes spills but not restores, which can
cause large gaps in location information for some variables, depending
on control flow. This patch make LiveDebugValues recognize restores and
generate appropriate DBG_VALUE instructions.
This patch was posted previously with r352642 and reverted in r352666 due
to buildbot errors. A missing return statement was the cause for the
failures.
Reviewers: aprantl, NicolaPrica
Differential Revision: https://reviews.llvm.org/D57271
llvm-svn: 353089
The LiveDebugValues pass recognizes spills but not restores, which can
cause large gaps in location information for some variables, depending
on control flow. This patch make LiveDebugValues recognize restores and
generate appropriate DBG_VALUE instructions.
Reviewers: aprantl, NicolaPrica
Differential Revision: https://reviews.llvm.org/D57271
llvm-svn: 352642
Currently we do not always collapse subsequent .loc 0 0 directives. The
reason is that we were checking for a PrevInstLoc which is not set when
we emit a line-0 record. We should only check the LastAsmLine, which
seems to be created exactly for this purpose.
// When we emit a line-0 record, we don't update PrevInstLoc; so look at
// the last line number actually emitted, to see if it was line 0.
unsigned LastAsmLine =
Asm->OutStreamer->getContext().getCurrentDwarfLoc().getLine();
Differential revision: https://reviews.llvm.org/D56767
llvm-svn: 351395
The debug-use flag must be set exactly for uses on DBG_VALUEs. This is
so obvious that it can be trivially inferred while parsing. This will
reduce noise when printing while omitting an information that has little
value to the user.
The parser will keep recognizing the flag for compatibility with old
`.mir` files.
Differential Revision: https://reviews.llvm.org/D53903
llvm-svn: 345671
Now we switch to the subregister in expandPostRAPseudos where we already switched the opcode.
This simplifies a few isel patterns that used the pseudo directly. And magically seems to have improved our ability to CSE it in the undef-label.ll test.
llvm-svn: 339496
Changes the default Windows target triple returned by
GetHostTriple.cmake from the old environment names (which we wanted to
move away from) to newer, normalized ones. This also requires updating
all tests to use the new systems names in constraints.
Differential Revision: https://reviews.llvm.org/D47381
llvm-svn: 339307
During the execution of long functions or functions that have a lot of
inlined code it could come to the situation where tracked value could be
transferred from one register to another. The transfer is recognized only if
destination register is a callee saved register and if source register is
killed. We do not salvage caller-saved registers since there is a great
chance that killed register would outlive it.
Patch by Nikola Prica.
Differential Revision: https://reviews.llvm.org/D44016
llvm-svn: 336978
These tests would fail with -verify-machineinstrs because the MI
generated from the IR would be merged with the one already in the MIR
files, and we get the following error:
```
*** Bad machine code: Function has NoVRegs property but there are VReg operands ***
- function: f
```
Differential Revision: https://reviews.llvm.org/D49191
llvm-svn: 336907
Jeremy Morse