isl_val_int_from_ui takes an 'unsigned long' which has on 32-bit and LLP64
windows systems only 32 bit. Hence, make sure we do not use it with constants
that are larger than 32 bit.
Reported-by: Michael Kruse <llvm@meinersbur.de>
llvm-svn: 279824
This improves the readability of failing test results, as gtest prints always
the first argument as the 'expected value'.
In the previous commit we already changed the tests for isl_valFromAPInt. In
this commit, the tests for IslValToAPInt follow.
Suggested-by: Michael Kruse <llvm@meinersbur.de>
llvm-svn: 279817
The recent unit tests we gained made clear that the semantics of
isl_valFromAPInt are not clear, due to missing documentation. In this change we
document both the calling interface as well as the implementation of
isl_valFromAPInt.
We also make the implementation easier to read by removing integer wrappig in
abs() when passing in the minimal integer value for a given bitwidth. Even
though wrapping and subsequently interpreting the result as unsigned value gives
the correct result, this is far from obvious. Instead, we explicitly add one
more bit to the input type to ensure that abs will never wrap. This change did
not uncover a bug in the old implementation, but was introduced to increase
readability.
We update the tests to add a test case for this special case and use this
opportunity to also test a number larger than 64 bit. Finally, we order the
arguments of the test cases to make sure the expected output is first. This
helps readability in case of failing test cases as gtest assumes the first value
to be the exected value.
Reviewed-by: Michael Kruse <llvm@meinersbur.de>
Differential Revision: https://reviews.llvm.org/D23917
llvm-svn: 279815
The recent unit tests we gained made clear that the semantics of APIntFromVal
are not clear, due to missing documentation. In this change we document both
the calling interface as well as the implementation of APIntFromVal. We also
make the implementation easier to read by removing the use of magic numbers.
Finally, we add tests to check the bitwidth of the created values as well as
the correct modeling of very large numbers.
Reviewed-by: Michael Kruse <llvm@meinersbur.de>
Differential Revision: https://reviews.llvm.org/D23910
llvm-svn: 279813
Remove the unused function get_system_libs. Instead, run
'llvm-config --system-libs' to determine which libraries are required in
addition LLVM's for linking an executable. At the moment these are the unittests
that link to gtest and transitively depend on these system libs.
llvm-svn: 279743
Only build them for check-polly and check-polly-unittests in out-of-tree builds.
In LLVM, this behaviour is controlled with LLVM_BUILD_TESTS. Polly out-of-tree
does not have such a flag.
llvm-svn: 279740
We cannot built ISL as shared object because we build it with
-fvisibility=hidden; The created shared object would have no accessible symbols.
The reason it is built with -fvisibility=hidden is because opt/clang might load
other libraries that have ISL embedded and whose' symbols would conflict with
Polly's private ISL. This could happend with Draggonegg.
In the future we might instead statically link PollyISL into the Polly shared
object to avoid installing the static library.
Requested-by: Vedran Miletic <vedran@miletic.net>
See-also: llvm.org/PR27306
llvm-svn: 279737
Add the infrastructure for unittests to Polly and two simple tests for
conversion between isl_val and APInt. In addition, a build target
check-polly-unittests is added to run only the unittests but not the regression
tests.
Clang's unittest mechanism served as as a blueprint which then was adapted to
Polly.
Differential Revision: https://reviews.llvm.org/D23833
llvm-svn: 279734
configure_lit_site_cfg defines some more parameters that are used in
lit.site.cfg.in. configure_file would leave those empty. These additional
definitions seem to be unimportant for regression tests, but unittests do not
work without them.
In case of out-of-tree builds, define the additional parameters with default
values. These may not take all configuration parameters into account, as
configure_lit_site_cfg would.
llvm-svn: 279733
This previously was not required because in an out-of-tree build Polly would
only build libraries (LLVMPolly, libPolly, libPollyISL, libPollyPPCG), but no
executables where the libraries would be linked to. This will change when adding
unittests in a follow-up commit.
llvm-svn: 279730
The program 'llvm-lit', like 'not' and 'FileCheck' are necessary for running
check-polly. Warn of any of the three is not in LLVM_INSTALL_ROOT/bin directory.
llvm-svn: 279728
Dump polyhedral descriptions of Scops optimized with the isl scheduling
optimizer and the set of post-scheduling transformations applied
on the schedule tree to be able to check the work of the IslScheduleOptimizer
pass at the polyhedral level.
Reviewed-by: Tobias Grosser <tobias@grosser.es>
Differential Revision: https://reviews.llvm.org/D23740
llvm-svn: 279395
getAccessFunctions() is dead code and the 'BB' argument
of getOrCreateAccessFunctions() is not used. This patch deletes
getAccessFunctions and transforms AccFuncMap into
a std::vector<std::unique_ptr<MemoryAccess>> AccessFunctions.
Reviewed-by: Tobias Grosser <tobias@grosser.es>
Differential Revision: https://reviews.llvm.org/D23759
llvm-svn: 279394
The existing code would add the operands in the wrong order, and eventually
crash because the SCEV expression doesn't exactly match the parameter SCEV
expression in SCEVAffinator::visit. (SCEV doesn't sort the operands to
getMulExpr in general.)
Differential Revision: https://reviews.llvm.org/D23592
llvm-svn: 279087
We already invalidated a couple of critical values earlier on, but we now
invalidate all instructions contained in a scop after the scop has been code
generated. This is necessary as later scops may otherwise obtain SCEV
expressions that reference values in the earlier scop that before dominated
the later scop, but which had been moved into the conditional branch and
consequently do not dominate the later scop any more. If these very values are
then used during code generation of the later scop, we generate used that are
dominated by the values they use.
This fixes: http://llvm.org/PR28984
llvm-svn: 279047
Normally this is ensured when adding PHI nodes, but as PHI node dependences
do not need to be added in case all incoming blocks are within the same
non-affine region, this was missed.
This corrects an issue visible in LNT's sqlite3, in case invariant load hoisting
was disabled.
llvm-svn: 278792
With invariant load hoisting enabled the LLVM buildbots currently show some
miscompiles, which are possibly caused by invariant load hosting itself.
Confirming and fixing this requires a more in-depth analysis. To meanwhile get
back green buildbots that allow us to observe other regressions, we disable
invariant code hoisting temporarily. The relevant bug is tracked at:
http://llvm.org/PR28985
llvm-svn: 278681
This will make it easier to switch the default of Polly's invariant load
hoisting strategy and also makes it very clear that these test cases
indeed require invariant code hoisting to work.
llvm-svn: 278667
This is the third patch to apply the BLIS matmul optimization pattern on matmul
kernels (http://www.cs.utexas.edu/users/flame/pubs/TOMS-BLIS-Analytical.pdf).
BLIS implements gemm as three nested loops around a macro-kernel, plus two
packing routines. The macro-kernel is implemented in terms of two additional
loops around a micro-kernel. The micro-kernel is a loop around a rank-1
(i.e., outer product) update. In this change we perform replacement of
the access relations and create empty arrays, which are steps to implement
the packing transformation. In subsequent changes we will implement copying
to created arrays.
Reviewed-by: Tobias Grosser <tobias@grosser.es>
Differential Revision: http://reviews.llvm.org/D22187
llvm-svn: 278666
To do so we change the way array exents are computed. Instead of the precise
set of memory locations accessed, we now compute the extent as the range between
minimal and maximal address in the first dimension and the full extent defined
by the sizes of the inner array dimensions.
We also move the computation of the may_persist region after the construction
of the arrays, as it relies on array information. Without arrays being
constructed no useful information is computed at all.
llvm-svn: 278212
Ensure the right scalar allocations are used as the host location of data
transfers. For the device code, we clear the allocation cache before device
code generation to be able to generate new device-specific allocation and
we need to make sure to add back the old host allocations as soon as the
device code generation is finished.
llvm-svn: 278126
This increases the readability of the IR and also clarifies that the GPU
inititialization is executed _after_ the scalar initialization which needs
to before the code of the transformed scop is executed.
Besides increased readability, the IR should not change. Specifically, I
do not expect any changes in program semantics due to this patch.
llvm-svn: 278125
In case some code -- not guarded by control flow -- would be emitted directly in
the start block, it may happen that this code would use uninitalized scalar
values if the scalar initialization is only emitted at the end of the start
block. This is not a problem today in normal Polly, as all statements are
emitted in their own basic blocks, but Polly-ACC emits host-to-device copy
statements into the start block.
Additional Polly-ACC test coverage will be added in subsequent changes that
improve the handling of PHI nodes in Polly-ACC.
llvm-svn: 278124
After having generated the code for a ScopStmt, we run a simple dead-code
elimination that drops all instructions that are known to be and remain unused.
Until this change, we only considered instructions for dead-code elimination, if
they have a corresponding instruction in the original BB that belongs to
ScopStmt. However, when generating code we do not only copy code from the BB
belonging to a ScopStmt, but also generate code for operands referenced from BB.
After this change, we now also considers code for dead code elimination, which
does not have a corresponding instruction in BB.
This fixes a bug in Polly-ACC where such dead-code referenced CPU code from
within a GPU kernel, which is possible as we do not guarantee that all variables
that are used in known-dead-code are moved to the GPU.
llvm-svn: 278103
The function expandRegion() frees Region* objects again when it determines that
these are not valid SCoPs. However, the DetectionContext added to the
DetectionContextMap still holds a reference. The validity is checked using the
ValidRegions lookup table. When a new Region is added to that list, it might
share the same address, such that the DetectionContext contains two
Region* associations that are in ValidRegions, but that are unrelated and of
which one has already been free.
Also remove the DetectionContext when not a valid expansion.
llvm-svn: 278062
When adding code that avoids to pass values used in isl expressions and
LLVM instructions twice, we forgot to make single variable passed to the
kernel available in the ValueMap that makes it usable for instructions that
are not replaced with isl ast expressions. This change adds the variable
that is passed to the kernel to the ValueMap to ensure it is available
for such use cases as well.
llvm-svn: 278039
Tobias Grosser