This allows easier access to the induction descriptor from VPlan,
without needing to go through Legal. VPReductionPHIRecipe already
contains a RecurrenceDescriptor in a similar fashion.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D115111
Previously we missed cloning metadata on function declarations because
we don't call CloneFunctionInto() on declarations in CloneModule().
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D113812
Record widening decisions for memory operations within the planned recipes and
use the recorded decisions in code-gen rather than querying the cost model.
Differential Revision: https://reviews.llvm.org/D110479
With improved analysis in determining CFG equivalence that does
not require strict dominance and post-dominance conditions, we
now relax isSafeToMoveBefore() such that an instruction I can
be moved before InsertPoint even if they do not strictly dominate
each other, as long as they follow the same control flow path.
For example, we can move Instruction 0 before Instruction 1,
and vice versa.
```
if (cond1)
// Instruction 0: %add = add i32 1, 2
if (cond1)
// Instruction 1: %add2 = add i32 2, 1
```
Reviewed By: Whitney
Differential Revision: https://reviews.llvm.org/D110456
When moving an entire basic block BB before InsertPoint, currently
we check for all instructions whether the operands dominates
InsertPoint, however, this can be improved such that even an
operand does not dominate InsertPoint, as long as it appears as
a previous instruction in the same BB, it is safe to move.
Reviewed By: Whitney
Differential Revision: https://reviews.llvm.org/D110378
This patch makes it possible to query callbase reachability
(Can a callbase reach a function Fn transitively).
The patch moves the reachability query handling logic to a member class,
this class will have more users within the AA once we add other function
reachability queries.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D106402
Previously the CodeExtractor created exit stubs, and the subsequent return value of the outlined function based on the order of out-of-region blocks after splitting any phi nodes, and collecting the blocks to be outlined. This could cause differences in order if there was a difference of exit block phi nodes between the two regions. This patch moves the collection of the output target blocks to be before this occurs, so that the assignment of target block to output value will be the same, regardless of the contents of the output block.
Reviewers: paquette, roelofs
Differential Revision: https://reviews.llvm.org/D108657
The Code Extractor does not provide an easy mechanism for determining the
inputs and outputs after extraction has occurred, this patch gives the
ability to pass in empty SetVectors to be filled with the inputs and
outputs if they need to be analyzed.
Added Tests:
- InputOutputMonitoring in unittests/Transforms/Utils/CodeExtractorTests.cpp
Reviewers: paquette
Differential Revision: https://reviews.llvm.org/D106991
MSSA-based LICM has been enabled by default for a few years now.
This drops the old AST-based implementation. Using loop(licm) will
result in a fatal error, the use of loop-mssa(licm) is required
(or just licm, which defaults to loop-mssa).
Note that the core canSinkOrHoistInst() logic has to retain AST
support for now, because it is shared with LoopSink.
Differential Revision: https://reviews.llvm.org/D108244
This option has been enabled by default for quite a while now.
The practical impact of removing the option is that MSSA use
cannot be disabled in default pipelines (both LPM and NPM) and
in manual LPM invocations. NPM can still choose to enable/disable
MSSA using loop vs loop-mssa.
The next step will be to require MSSA for LICM and drop the
AST-based implementation entirely.
Differential Revision: https://reviews.llvm.org/D108075
D106850 introduced a simplification for llvm.vscale by looking at the
surrounding function's vscale_range attributes. The call that's being
simplified may not yet have been inserted into the IR. This happens for
example during function cloning.
This patch fixes the issue by checking if the instruction is in a
parent basic block.
checkForAllInstructions was not handling declarations correctly.
It should have been returning false when it gets called on a declaration
The patch also fixes a test case for AAFunctionReachability for it to be able
to pass after the changes to the checkForAllinstructions.
Differential Revision: https://reviews.llvm.org/D106625
This attribute uses Attributor's internal 'optimistic' call graph
information to answer queries about function call reachability.
Functions can become reachable over time as new call edges are
discovered.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D104599
The old version of this code would blindly perform arithmetic without
paying attention to whether the types involved were pointers or
integers. This could lead to weird expressions like negating a pointer.
Explicitly handle simple cases involving pointers, like "x < y ? x : y".
In all other cases, coerce the operands of the comparison to integer
types. This avoids the weird cases, while handling most of the
interesting cases.
Differential Revision: https://reviews.llvm.org/D103660
[Debugify][Original DI] Test dbg var loc preservation
This is an improvement of [0]. This adds checking of
original llvm.dbg.values()/declares() instructions in
optimizations.
We have picked a real issue that has been found with
this (actually, picked one variable location missing
from [1] and resolved the issue), and the result is
the fix for that -- D100844.
Before applying the D100844, using the options from [0]
(but with this patch applied) on the compilation of GDB 7.11,
the final HTML report for the debug-info issues can be found
at [1] (please scroll down, and look for
"Summary of Variable Location Bugs"). After applying
the D100844, the numbers has improved a bit -- please take
a look into [2].
[0] https://llvm.org/docs/HowToUpdateDebugInfo.html#\
test-original-debug-info-preservation-in-optimizations
[1] https://djolertrk.github.io/di-check-before-adce-fix/
[2] https://djolertrk.github.io/di-check-after-adce-fix/
Differential Revision: https://reviews.llvm.org/D100845
The Unit test was failing because the pass from the test that
modifies the IR, in its runOnFunction() didn't return 'true',
so the expensive-check configuration triggered an assertion.
This is an improvement of [0]. This adds checking of
original llvm.dbg.values()/declares() instructions in
optimizations.
We have picked a real issue that has been found with
this (actually, picked one variable location missing
from [1] and resolved the issue), and the result is
the fix for that -- D100844.
Before applying the D100844, using the options from [0]
(but with this patch applied) on the compilation of GDB 7.11,
the final HTML report for the debug-info issues can be found
at [1] (please scroll down, and look for
"Summary of Variable Location Bugs"). After applying
the D100844, the numbers has improved a bit -- please take
a look into [2].
[0] https://llvm.org/docs/HowToUpdateDebugInfo.html\
[1] https://djolertrk.github.io/di-check-before-adce-fix/
[2] https://djolertrk.github.io/di-check-after-adce-fix/
Differential Revision: https://reviews.llvm.org/D100845
Currently all AA analyses marked as preserved are stateless, not taking
into account their dependent analyses. So there's no need to mark them
as preserved, they won't be invalidated unless their analyses are.
SCEVAAResults was the one exception to this, it was treated like a
typical analysis result. Make it like the others and don't invalidate
unless SCEV is invalidated.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D102032
Printing pass manager invocations is fairly verbose and not super
useful.
This allows us to remove DebugLogging from pass managers and PassBuilder
since all logging (aside from analysis managers) goes through
instrumentation now.
This has the downside of never being able to print the top level pass
manager via instrumentation, but that seems like a minor downside.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D101797
We're trying to move DebugLogging into instrumentation, rather than
being part of PassManagers/AnalysisManagers.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D102093
This patch adds initial unit tests for appendToUsedList
in the ModuleUtils. It specifically tests changes from
https://reviews.llvm.org/D101363 which intent to allow
insertion of globals in non-zero address spaces into the
llvm used lists.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D101746
As suggested in D99294, this adds a getVPSingleValue helper to use for
recipes that are guaranteed to define a single value. This replaces uses
of getVPValue() which used to default to I = 0.
When iterating over const blocks, the base type in the lambdas needs
to use const VPBlockBase *, otherwise it cannot be used with input
iterators over const VPBlockBase.
Also adjust the type of the input iterator range to const &, as it
does not take ownership of the input range.
This patch adds a blocksOnly helpers which take an iterator range
over VPBlockBase * or const VPBlockBase * and returns an interator
range that only include BlockTy blocks. The accesses are casted to
BlockTy.
Reviewed By: a.elovikov
Differential Revision: https://reviews.llvm.org/D101093
This patch adds a new iterator to traverse through VPRegionBlocks and a
GraphTraits specialization using the iterator to traverse through
VPRegionBlocks.
Because there is already a GraphTraits specialization for VPBlockBase *
and co, a new VPBlockRecursiveTraversalWrapper helper is introduced.
This allows us to provide a new GraphTraits specialization for that
type. Users can use the new recursive traversal by using this wrapper.
The graph trait visits both the entry block of a region, as well as all
its successors. Exit blocks of a region implicitly have their parent
region's successors. This ensures all blocks in a region are visited
before any blocks in a successor region when doing a reverse post-order
traversal of the graph.
Reviewed By: a.elovikov
Differential Revision: https://reviews.llvm.org/D100175
CommandLine.h is indirectly included in ~50% of TUs when building
clang, and VirtualFileSystem.h is large.
(Already remarked by jhenderson on D70769.)
No behavior change.
Differential Revision: https://reviews.llvm.org/D100957
Add an initial version of a helper to determine whether a recipe may
have side-effects.
Reviewed By: a.elovikov
Differential Revision: https://reviews.llvm.org/D100259
Summary:
The function SplitCriticalEdge (called by SplitEdge) can return a nullptr in
cases where the edge is a critical. SplitEdge uses SplitCriticalEdge assuming it
can always split all critical edges, which is an incorrect assumption.
The three cases where the function SplitCriticalEdge will return a nullptr is:
1. DestBB is an exception block
2. Options.IgnoreUnreachableDests is set to true and
isa(DestBB->getFirstNonPHIOrDbgOrLifetime()) is not equal to a nullptr
3. LoopSimplify form must be preserved (Options.PreserveLoopSimplify is true)
and it cannot be maintained for a loop due to indirect branches
For each of these situations they are handled in the following way:
1. Modified the function ehAwareSplitEdge originally from
llvm/lib/Transforms/Coroutines/CoroFrame.cpp to handle the cases when the DestBB
is an exception block. This function is called directly in SplitEdge.
SplitEdge does not call SplitCriticalEdge in this case
2. Options.IgnoreUnreachableDests is set to false by default, so this situation
does not apply.
3. Return a nullptr in this situation since the SplitCriticalEdge also returned
nullptr. Nothing we can do in this case.
Reviewed By: asbirlea
Differential Revision:https://reviews.llvm.org/D94619
For VPWidenPHIRecipes that model all incoming values as VPValue
operands, print those operands instead of printing the original PHI.
D99294 updates recipes of reduction PHIs to use the VPValue for the
incoming value from the loop backedge, making use of this new printing.
I think byval/sret and the others are close to being able to rip out
the code to support the missing type case. A lot of this code is
shared with inalloca, so catch this up to the others so that can
happen.
I foresee two uses for this:
1) It's easier to use those in debugger.
2) Once we start implementing more VPlan-to-VPlan transformations (especially
inner loop massaging stuff), using the vectorized LLVM IR as CHECK targets in
LIT test would become too obscure. I can imagine that we'd want to CHECK
against VPlan dumps after multiple transformations instead. That would be
easier with plain text dumps than with DOT format.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D96628
This reverts commit 6b053c9867.
The build is broken:
ld.lld: error: undefined symbol: llvm::VPlan::printDOT(llvm::raw_ostream&) const
>>> referenced by LoopVectorize.cpp
>>> LoopVectorize.cpp.o:(llvm::LoopVectorizationPlanner::printPlans(llvm::raw_ostream&)) in archive lib/libLLVMVectorize.a
I foresee two uses for this:
1) It's easier to use those in debugger.
2) Once we start implementing more VPlan-to-VPlan transformations (especially
inner loop massaging stuff), using the vectorized LLVM IR as CHECK targets in
LIT test would become too obscure. I can imagine that we'd want to CHECK
against VPlan dumps after multiple transformations instead. That would be
easier with plain text dumps than with DOT format.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D96628
BasicAA stores a reference to LoopInfo inside. This imposes an implicit
requirement of keeping it up to date whenever we modify the IR (in particular,
whenever we modify terminators of blocks that belong to loops). Failing
to do so leads to incorrect state of the LoopInfo.
Because general AA does not require loop info updates and provides to API to
update it properly, the users of AA reasonably assume that there is no need to
update the loop info. It may be a reason of bugs, as example in PR43276 shows.
This patch drops dependence of BasicAA on LoopInfo to avoid this problem.
This may potentially pessimize the result of queries to BasicAA.
Differential Revision: https://reviews.llvm.org/D98627
Reviewed By: nikic
This reverts commit 329aeb5db4,
and relands commit 61f006ac65.
This is a continuation of D89456.
As it was suggested there, now that SCEV models `PtrToInt`,
we can try to improve SCEV's pointer handling.
In particular, i believe, i will need this in the future
to further fix `SCEVAddExpr`operation type handling.
This removes special handling of `ConstantPointerNull`
from `ScalarEvolution::createSCEV()`, and add constant folding
into `ScalarEvolution::getPtrToIntExpr()`.
This way, `null` constants stay as such in SCEV's,
but gracefully become zero integers when asked.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D98147
This is a continuation of D89456.
As it was suggested there, now that SCEV models `PtrToInt`,
we can try to improve SCEV's pointer handling.
In particular, i believe, i will need this in the future
to further fix `SCEVAddExpr`operation type handling.
This removes special handling of `ConstantPointerNull`
from `ScalarEvolution::createSCEV()`, and add constant folding
into `ScalarEvolution::getPtrToIntExpr()`.
This way, `null` constants stay as such in SCEV's,
but gracefully become zero integers when asked.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D98147
This patch makes uses of the context bridges introduced in D83299 to make
AAValueConstantRange call site specific.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D83744
Add support to widen select instructions in VPlan native path by using a correct recipe when such instructions are encountered. This is already used by inner loop vectorizer.
Previously select instructions get handled by the wrong recipe and resulted in unreachable instruction errors like this one: https://bugs.llvm.org/show_bug.cgi?id=48139.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D97136
Florian Hahn