Many things that were in DWARFCompileUnit actually need to be in DWARFUnit. This patch moves all DWARFUnit specific things over into DWARFUnit and fixes the layering. This is in preparation for adding DWARFTypeUnit for the .debug_types patch.
Differential Revision: https://reviews.llvm.org/D45170
llvm-svn: 329305
After removing it, I got a couple of compile errors because we were
missing some symbols (SIGKILL and such), as their definitions were not
transitively included anymore. I fix this by including csignal from
PosixApi.h, as it's windows version provides a stub definitions of these
symbols. This should make the result of #including PosixApi.h more
consistent across platforms (although in the long run, we should just
get rid of this header).
llvm-svn: 329296
This is a combination stand alone BSD archive tool that can dump BSD archives:
% bsd.py /path/to/foo.a
Search archives for an object file:
% bsd.py --object foo.o bar.a
Dump the symbol definitions found in the __.SYMDEF objects:
% bsd.py --symdef bar.a
Find symbols by name that are listed in the __.SYMDEF objects:
% bsd.py --symbol _Z123 bar.a
Extract objects from BSD archives:
% bsd.py --object foo.o bar.a --extract
% bsd.py --object foo.o bar.a --extract --outfile /tmp/foo.o
% bsd.py --object foo.o bar.a --extract --mtime 0x1234556
It also has installs a new LLDB command line command when imported into LLDB:
(lldb) command script import ~/Dropbox/bin/bsd.py
The "verify-debug-map-objects" command has been installed, type "help verify-debug-map-objects" for detailed help.
(lldb) verify-debug-map-objects a.out
This will iterate through all object files and verify the modification times match for any .o files, it will verify any .o files from BSD archives are found and have matching modification times and print out errors if any are found.
llvm-svn: 328990
Remove Scalar::Cast.
It was noted on the list that this method is unused. So, this patch
removes it.
Fix Scalar::Promote for most integer types
This fixes promotion of most integer types (128- and 256-bit types are
handled in a subsequent patch) to floating-point types. Previously
promotion was done bitwise, where value preservation is correct.
Fix Scalar::Promote for 128- and 256-bit integer types
This patch fixes the behavior of Scalar::Promote when trying to
perform a binary operation involving a 128- or 256-bit integer type
and a floating-point type. Now, the integer is cast to the floating
point type for the operation.
Patch by Tom Tromey!
Differential Revision: https://reviews.llvm.org/D44907
llvm-svn: 328985
Summary:
We would fail to resolve (and thus display the value of) any
templated type which contained a template template argument even
though we don't really use template arguments.
This patch adds minimal support for template template arguments,
but I doubt we need any more than that.
Reviewers: clayborg, jingham
Subscribers: JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D44613
llvm-svn: 328984
These functions were unused as everyone just went straight for the
direct operations on the register context. In fact, the
Save/RestoreAllRegisters actually appear to be wrong (inverted). Thanks
to Tatyana for pointing this out.
These functions are not very useful now that we can guarantee that each
thread always contains a valid register context, so I just delete them.
llvm-svn: 328770
Summary:
When a MIG routine returns KERN_FAILURE, the demux function will release any OOL resources like ports. In this case, task_port and thread_port will be released twice, potentially resulting in use after free of the ports.
I don't think we can test this in any useful way
rdar://problem/37331387
Reviewers: jasonmolenda
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D45011
llvm-svn: 328761
Summary:
We've had a mismatch in the checksum computation between the sender and
receiver. The sender computed the payload checksum using the wire
encoding of the packet, while the receiver did this after expanding
un-escaping and expanding run-length-encoded sequences. This resulted in
communication breakdown if packets using these feature were sent in the
ack mode.
Normally, this did not cause any issues since the only packet we send in
the ack-mode is the QStartNoAckMode packet, but I ran into this when
debugging the lldb-server tests which (for better or worse) don't use
this mode.
According to the gdb-remote documentation "The two-digit checksum is computed as
the modulo 256 sum of all characters between the leading ‘$’ and the
trailing ‘#’", it seems that our sender is doing the right thing here.
Therefore, I fix the receiver the match the sender behavior and add a
test.
With this bug fixed, we can see that lldb-server is sending a stop-reply
after receiving the "k" in the same way as debugserver does (but we
weren't detecting this because at that point the connection was dead
already). I fix that expectation as well.
Reviewers: clayborg, jasonmolenda
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D44922
llvm-svn: 328693
When importing C++ methods into clang AST nodes from the DWARF symbol
table, preserve the DW_AT_linkage_name and use it as the linker
("asm") name for the symbol.
Concretely, this enables `expression` to call into names that use the
GNU `abi_tag` extension, and enables lldb to call into code using
std::string or std::list from recent versions of libstdc++. See
https://bugs.llvm.org/show_bug.cgi?id=35310 . It also seems broadly
more robust than relying on the DWARF->clang->codegen pipeline to
roundtrip properly, but I'm not immediately aware of any other cases
in which it makes a difference.
Patch by Nelson Elhage!
Differential Revision: https://reviews.llvm.org/D40283
llvm-svn: 328658
The first issue was that the test was capturing the "before" disassembly
before launching, and the "after" after. This is a problem because some
of the disassembly will change after we know the load address (e.g. PCs
in call instructions). I fix this by capturing both disassemblies with
the process running.
The second issue was that the refactor in r328488 accidentaly changed
the meaning of the test, as it was no longer disassembling the function
which contained the breakpoint.
While inside, I also modernize the test to use
lldbutil.run_to_source_breakpoint and prevent debug-info replication.
llvm-svn: 328504
- close_fds is not compatible with stdin/out redirection on windows. I
just remove it, as this is not required for correct operation.
- the command string was assuming a posix shell. I rewrite the Popen
invocation to avoid the need for passing the arguments through a shell.
llvm-svn: 328489
Summary:
TestExprsChar.py
Char is unsigned char by default in PowerPC.
TestDisassembleBreakpoint.py
Modify disassemble testcase to consider multiple architectures.
TestThreadJump.py
Jumping directly to the return line on PowerPC architecture dos not
means returning the value that is seen on the code. The last test fails,
because it needs the execution of some assembly in the beginning of the
function. Avoiding this test for this architecture.
TestEhFrameUnwind.py
Implement func for ppc64le test case.
TestWatchLocation.py
TestStepOverWatchpoint.py
PowerPC currently supports only one H/W watchpoint.
TestDisassembleRawData.py
Add PowerPC opcode and instruction for disassemble testcase.
Reviewers: labath
Reviewed By: labath
Subscribers: davide, labath, alexandreyy, lldb-commits, luporl, lbianc
Differential Revision: https://reviews.llvm.org/D44472
Patch by Alexandre Yukio Yamashita <alexandre.yamashita@eldorado.org.br>.
llvm-svn: 328488
Summary: PPC64's auxvec has a special key that must be ignored.
Reviewers: clayborg, labath
Reviewed By: clayborg, labath
Subscribers: alexandreyy, lbianc
Differential Revision: https://reviews.llvm.org/D43771
Patch by Leandro Lupori <leandro.lupori@gmail.com>.
llvm-svn: 328486
Summary:
First attempt at landing D42145 was reverted because it caused test
failures on some android devices. It turned out this was because these
devices had vdso modules with differing physical and virtual addresses.
This was not caught earlier because all of the modules in our tests
either lack physical addresses or have them identical to virtual ones.
In the discussion on the patch, we came to the conclusion that in the
scenario where we are merely setting a load address of a module (for
example from a dynamic loader plugin), we should always use virtual
addresses (i.e., preserve status quo). This patch adds a test to make
sure we don't regress in that direction.
Reviewers: owenpshaw
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D44738
llvm-svn: 328485
This one will be used to print statistics about lldb sessions
(including, e.g. number of expression evaluation succeeded or
failed). I decided to commit the skeleton first so that we have
a clean reference on how a command should be implemented.
My future commits are going to populate this command and test
it.
<rdar://problem/36555975>
llvm-svn: 328378
It wasn't even registered.
(lldb) apropos args
No commands found pertaining to 'args'. Try 'help' to see
a complete list of debugger commands.
llvm-svn: 328370
Some PDB Symbols don't have line information. Use the section contributions to determine their compiland.
This is useful to determine the parent compiland for PDBSymbolTypeData, i.e. variables.
llvm-svn: 328232
- postmortem tests: make sure the core files are created in the build
folder
- TestSourceManager: copy the .c file into the build dir before
modifying it
- TestLogging: create log files in the build folder
After these changes I get a clean test run (on linux) even if I set the
source tree to be read only. It's possible some of the skipped/xfailed
tests are still creating files in the source tree, but at the moment, I
don't have plans to go hunting for those.
llvm-svn: 328106
As suggested by Pavel on lldb-commits. Originally I picked os.system
because it was so much more simple than the subprocess module, but that
no longer holds true after yesterday's hack in r328020. This is what it
should've been in the first place.
Differential revision: https://reviews.llvm.org/D44728
llvm-svn: 328089
The issue was that the ASTDumper was being passed a null pointer
(because we did not create any declaration for the operator==). The
crash was in logging code, so it only manifested it self if you ran the
tests with logging enabled (like our bots do).
Given that this is logging code and the rest of the debugger is fine
with the declaration being null, I just make sure the logging code can
handle it as well. Right now I just do the null check in
ClangExpressionDeclMap, but if the ASTDumper class is meant to be a
debugging/logging aid, then it might be a good idea move the check
inside the class itself.
llvm-svn: 328088
- use more goodies from Makefile.rules to correctly build a 32-bit
binary.
- avoid hardcoding typeof(nil) in the test.
This should partially fix the linux bot. There is still one assertion
failure remaining, which I'll have to investigate separately, as I am
not experiencing it locally.
llvm-svn: 328083
New tests should run the make syntax voodoo $@ and $<
instead of hardcoding the names. We should also document
how to write one, it's on my list.
llvm-svn: 328062
Instead of applying the sledgehammer of refusing to insert any
C++ symbol in the ASTContext, try to validate the decl if what
we have is an operator. There was other code in lldb which was
responsible for this, just not really exposed (or used) in this
codepath. Also, add a better/more comprehensive test.
<rdar://problem/35645893>
llvm-svn: 328025
If we don't wrap arguments to the wrapper in single quotes, combined
arguments, for example for -E, don't reach dotest.py as a unit but as
separate arguments, causing the latter to fail.
llvm-svn: 328020
While trying to use this header I noticed that it is not in the include
folder. Move it to there and update all #includes to reference that file
correctly.
llvm-svn: 327996
Summary:
When running on an architecture other than x86_64, the
target.ConnectRemote() part of the test may add platform information to
the target triple.
It was observed that this happens at Process::CompleteAttach() method,
after the platform_sp->IsCompatibleArchitecture() check fails.
This method then calls platform_sp->GetPlatformForArchitecture(), that
on a Linux machine ends up returning a generic Linux platform, that then
ends up getting added to the original target architecture.
Reviewers: clayborg, labath, jasonmolenda
Reviewed By: labath
Subscribers: alexandreyy, lbianc
Differential Revision: https://reviews.llvm.org/D44022
Patch by Leandro Lupori <leandro.lupori@gmail.com>.
llvm-svn: 327981
Summary:
- Fix test jump for powerpc64le
Jumping directly to the return line on power architecture dos not means
returning the value that is seen on the code. The last test fails, because
it needs the execution of some assembly in the beginning of the function.
Avoiding this test for this architecture.
- Avoid evaluate environ variable name on Linux
On Linux the Symbol environ conflicts with another variable, then in
order to avoid it, this test was moved into a specific test, which is not
supported if the OS is Linux.
- Added PPC64le as MIPS behavior
Checking the disassembler output, on PPC64le machines behaves as MPIS.
Added method to identify PPC64le architecture and checking it when
disassembling instructions in the test case.
Reviewers: labath
Reviewed By: labath
Subscribers: clayborg, labath, luporl, alexandreyy, sdardis, ki.stfu, arichardson
Differential Revision: https://reviews.llvm.org/D44101
Patch by Leonardo Bianconi <leonardo.bianconi@eldorado.org.br>.
llvm-svn: 327977
The difference between this and the previous patch is that now we use
ELF physical addresses only for loading objects into the target (and the
rest of the module load address logic still uses virtual addresses).
Summary:
When writing an object file over gdb-remote, use the vFlashErase, vFlashWrite, and vFlashDone commands if the write address is in a flash memory region. A bare metal target may have this kind of setup.
- Update ObjectFileELF to set load addresses using physical addresses. A typical case may be a data section with a physical address in ROM and a virtual address in RAM, which should be loaded to the ROM address.
- Add support for querying the target's qXfer:memory-map, which contains information about flash memory regions, leveraging MemoryRegionInfo data structures with minor modifications
- Update ProcessGDBRemote to use vFlash commands in DoWriteMemory when the target address is in a flash region
Original discussion at http://lists.llvm.org/pipermail/lldb-dev/2018-January/013093.html
Reviewers: clayborg, labath
Reviewed By: labath
Subscribers: llvm-commits, arichardson, emaste, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D42145
Patch by Owen Shaw <llvm@owenpshaw.net>.
llvm-svn: 327970
Pavel Labath