Original Commit Message:
After the commit r368987 (rG643adb55769e) was landed, the frame record (FP and LR register)
may be placed in the middle of a stack frame if a function has both callee-saved
general-purpose registers and floating point registers. This will break the stack unwinders
that simply walk through the frame records (based on the guarantee from AAPCS64
"The Frame Pointer" section). This commit fixes the problem by adding the frame record offset.
Patch By: logan
We have a gap in our store merging capabilities for shift+truncate
patterns as discussed in:
https://llvm.org/PR46662
I generalized the code/comments for this function in earlier commits,
so we only need ease the type restriction and adjust the address/endian
checking to make this work.
AArch64 lets us switch endian to make sure that patterns are matched
either way.
Differential Revision: https://reviews.llvm.org/D86420
`GetFinalPathNameByHandleW(,,N,)` returns:
- `< N` on success (this value does not include the size of the terminating null character)
- `>= N` if buffer is too small (this value includes the size of the terminating null character)
So, when `N == Buffer.capacity() - 1`, we need to resize buffer if return value is > `Buffer.capacity() - 2`.
Also, we can set `N` to `Buffer.capacity()`.
Thus, without this patch `realPathFromHandle()` returns unfilled buffer when length of the final path of the file is equal to `Buffer.capacity()` or `Buffer.capacity() - 1`.
Reviewed By: andrewng, amccarth
Differential Revision: https://reviews.llvm.org/D86564
InstSimplify should do all transformations that ConstProp does, but
one thing that ConstProp does that InstSimplify wouldn't is inline
vector instructions that are constants, e.g. into a ret.
Previously vector instructions wouldn't be inlined in InstSimplify
because llvm::Simplify*Instruction() would return nullptr for specific
instructions, such as vector instructions that were actually constants,
if it couldn't simplify them.
This changes SimplifyInsertElementInst, SimplifyExtractElementInst, and
SimplifyShuffleVectorInst to return a vector constant when possible.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85946
The version of `st1d` that operates with vector plus immediate
addressing mode uses the alias `st1d { <Zn>.d }, <Pg>, [<Za>.d]` for
rendering `st1d { <Zn>.d }, <Pg>, [<Za>.d, #0]`. The disassembler was
generating `<Zn>.s` instead of `<Zn>.d>`.
Differential Revision: https://reviews.llvm.org/D86633
For `ld64` which uses legacy LTOCodeGenerator, it relies on
writeMergedModule to perform `ld -r` (generates a linked object file).
If all the inputs to `ld -r` is fullLTO bitcode, `ld64` will linked the
bitcode module, internalize all the symbols and write out another
fullLTO bitcode object file. This bitcode file doesn't have all the
bitcode inputs and it should not have LTOPostLink module flag. It will
also cause error when this bitcode object file is linked with other LTO
object file.
Fix the issue by not applying LTOPostLink flag during writeMergedModule
function. The flag should only be added when all the bitcode are linked
and ready to be optimized.
rdar://problem/58462798
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D84789
This would assert with unaligned DS access enabled. The offset may not
be aligned. Theoretically the pattern predicate should check the
memory alignment, although it is possible to have the memory be
aligned but not the immediate offset.
In this case I would expect it to use ds_{read|write}_b64 with
unaligned access, but am not clear if there's a reason it doesn't.
and indirect call promotion candidate.
Profile remapping is a feature to match a function in the module with its
profile in sample profile if the function name and the name in profile look
different but are equivalent using given remapping rules. This is a useful
feature to keep the performance stable by specifying some remapping rules
when sampleFDO targets are going through some large scale function signature
change.
However, currently profile remapping support is only valid for outline
function profile in SampleFDO. It cannot match a callee with an inline
instance profile if they have different but equivalent names. We found
that without the support for inline instance profile, remapping is less
effective for some large scale change.
To add that support, before any remapping lookup happens, all the names
in the profile will be inserted into remapper and the Key to the name
mapping will be recorded in a map called NameMap in the remapper. During
name lookup, a Key will be returned for the given name and it will be used
to extract an equivalent name in the profile from NameMap. So with the help
of the NameMap, we can translate any given name to an equivalent name in
the profile if it exists. Whenever we try to match a name in the module to
a name in the profile, we will try the match with the original name first,
and if it doesn't match, we will use the equivalent name got from remapper
to try the match for another time. In this way, the patch can enhance the
profile remapping support for searching inline instance and searching
indirect call promotion candidate.
In a planned large scale change of int64 type (long long) to int64_t (long),
we found the performance of a google internal benchmark degraded by 2% if
nothing was done. If existing profile remapping was enabled, the performance
degradation dropped to 1.2%. If the profile remapping with the current patch
was enabled, the performance degradation further dropped to 0.14% (Note the
experiment was done before searching indirect call promotion candidate was
added. We hope with the remapping support of searching indirect call promotion
candidate, the degradation can drop to 0% in the end. It will be evaluated
post commit).
Differential Revision: https://reviews.llvm.org/D86332
This patch adds NoUndef to Intrinsics.td.
The attribute is attached to llvm.assume's operand, because llvm.assume(undef)
is UB.
It is attached to pointer operands of several memory accessing intrinsics
as well.
This change makes ValueTracking::getGuaranteedNonPoisonOps' intrinsic check
unnecessary, so it is removed.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D86576
This is an older syntax than the {disp32} and {disp8} pseudo
prefixes that were added a few weeks ago. We can reuse most of
the support for that to support .d32 and .d8 as well.
This fixes a crash when declaring a destructor with a wrong name, then
writing result to pch file and loading it again. The PCH storage uses
DeclarationNameKey as key and it is the same key for both the invalid
destructor and the implicit one that was created because the other one
was invalid. When querying for the Foo::~Foo we end up getting
Foo::~Bar, which is then rejected and we end up with nullptr in
CXXRecordDecl::GetDestructor().
Fixes https://bugs.llvm.org/show_bug.cgi?id=47270
Differential Revision: https://reviews.llvm.org/D86624
As FIXME said, they really should be checking for a single user,
not use, so let's do that. It is not *that* unusual to have
the same value as incoming value in a PHI node, not unlike
how a PHI may have the same incoming basic block more than once.
There isn't a nice way to do that, Value::users() isn't uniqified,
and Value only tracks it's uses, not Users, so the check is
potentially costly since it does indeed potentially involes
traversing the entire use list of a value.
Instead of computing GUID based on some assumption about symbol mangling
rule from IRName to symbol name, lookup the IRName from all the symtabs
from all the input files to see if there are any matching symbols entry
provides the IRName for GUID computation.
rdar://65853754
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D84803
Summary:
Support TOCU and TOCL relocation type for object file generation.
Reviewed by: DiggerLin
Differential Revision: https://reviews.llvm.org/D84549
Fixes a build failure in the Darwin kernel. Tested with:
% nm -mU lib/libclang_rt.cc_kext_x86_64h_osx.a | grep __llvm_profile_raw_version
rdar://67809173
The non-standard header file `<sysexits.h>` provides some return values.
`EX_IOERR` is used to as a special value to signal a broken pipe to the clang driver.
On z/OS Unix System Services, this header file does not exists. This patch
- adds a check for `<sysexits.h>`, removing the dependency on `LLVM_ON_UNIX`
- adds a new header file `llvm/Support/ExitCodes`, which either includes
`<sysexits.h>` or defines `EX_IOERR`
- updates the users of `EX_IOERR` to include the new header file
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D83472
Currently, libFuzzer will exit with an error message if a non-existent
corpus directory is provided. However, if a user provides a non-existent
directory for the `artifact_prefix`, `exact_artifact_path`, or
`features_dir`, libFuzzer will continue execution but silently fail to
write artifacts/features.
To improve the user experience, this PR adds validation for the existence of
all user supplied directories before executing the main fuzzing loop. If they
don't exist, libFuzzer will exit with an error message.
Patch By: dgg5503
Reviewed By: morehouse
Differential Revision: https://reviews.llvm.org/D84808
Quiet mode is very useful for scripting, when only the diff format output is
required, or no output if not formatting is needed.
In case of no modified files, git-clang-format will output to screen even though
the quiet mode enabled.
This patch changes this behavior, so if quiet flag passes in - no output will be
available, even if no modified files exists.
Differential Revision: https://reviews.llvm.org/D85485
When floating point callee-saved registers were used, the frame pointer would
incorrectly point to the bottom of the CSR space (containing saved floating-point
registers), rather than to the frame record.
While all frame offsets were calculated consistently, resulting in working code,
this prevented stack walkers from being about to traverse the frame list.
This implements 2 different vectorisation fallback strategies if tail-folding
fails: 1) don't vectorise at all, or 2) vectorise using a scalar epilogue. This
can be controlled with option -prefer-predicate-over-epilogue, that has been
changed to take a numeric value corresponding to the tail-folding preference
and preferred fallback.
Patch by: Pierre van Houtryve, Sjoerd Meijer.
Differential Revision: https://reviews.llvm.org/D79783
This patch adds a few tests in DebugInfo/MIR/InstrRef/ of interesting
behaviour that the instruction referencing implementation of
LiveDebugValues has. Mostly, these tests exist to ensure that if you
give the "-experimental-debug-variable-locations" command line switch,
the right implementation runs; and to ensure it behaves the same way as
the VarLoc LiveDebugValues implementation.
I've also touched roughly 30 other tests, purely to make the tests less
rigid about what output to accept. DBG_VALUE instructions are usually
printed with a trailing !debug-location indicating its scope:
!debug-location !1234
However InstrRefBasedLDV produces new DebugLoc instances on the fly,
meaning there sometimes isn't a numbered node when they're printed,
making the output:
!debug-location !DILocation(line: 0, blah blah)
Which causes a ton of these tests to fail. This patch removes checks for
that final part of each DBG_VALUE instruction. None of them appear to
be actually checking the scope is correct, just that it's present, so
I don't believe there's any loss in coverage here.
Differential Revision: https://reviews.llvm.org/D83054
Muhammad Asif Manzoor