- Add an internal option `-amdgpu-use-aa-in-codegen` to enable or
disable this feature. By Default, it's enabled.
Differential Revision: https://reviews.llvm.org/D89320
The support is disabled by default. So far there is instruction
selection, spilling, and frame elimination. It also changes SP
from unswizzled to swizzled as used by flat scratch instructions,
so it cannot be mixed with MUBUF stack access.
At the very least missing:
- GlobalISel;
- Some optimizations in frame elimination in between vector
and scalar ALU;
- It shall finally allow to always materialize frame index
as an SGPR, but that is not implemented and frame elimination
cannot handle it yet;
- Unaligned and/or multidword flat scratch shall work, but it
is legalized now for MUBUF;
- Operand folding cannot optimize FI like with MUBUF yet;
- It will need scaling the value of the SP/FP in the DWARF
expression to recover the unswizzled scratch address;
Differential Revision: https://reviews.llvm.org/D89170
Summary:
This implements a workaround for a hardware bug in gfx8 and gfx9,
where register usage is not estimated correctly for image_store and
image_gather4 instructions when D16 is used.
Change-Id: I4e30744da6796acac53a9b5ad37ac1c2035c8899
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81172
Handle workitem intrinsics. There isn't really away to adequately test
this right now, since none of the known bits users are fine grained
enough to test the edge conditions. This triggers a number of
instances of the new 64-bit to 32-bit shift combine in the existing
tests.
Features UnalignedBufferAccess and UnalignedDSAccess are now used to determine
whether hardware supports such access.
UnalignedAccessMode should be used to enable them.
hasUnalignedBufferAccessEnabled() and hasUnalignedDSAccessEnabled() can be
now used to quickly check both.
Differential Revision: https://reviews.llvm.org/D84522
Adjust alignment requirements for ds_read/write_b96/b128.
GFX9 and onwards allow misaligned access for reads and writes but only if
SH_MEM_CONFIG.alignment_mode allows it.
UnalignedDSAccess is set on GCN subtargets from GFX9 onward to let us know if we
can relax alignment requirements.
UnalignedAccessMode acts similary to UnalignedBufferAccess for DS instructions
but only from GFX9 onward and is supposed to match alignment_mode. By default
alignment of 4 is required.
Differential Revision: https://reviews.llvm.org/D82788
This patch implements initial backend support for a -mtune CPU controlled by a "tune-cpu" function attribute. If the attribute is not present X86 will use the resolved CPU from target-cpu attribute or command line.
This patch adds MC layer support a tune CPU. Each CPU now has two sets of features stored in their GenSubtargetInfo.inc tables . These features lists are passed separately to the Processor and ProcessorModel classes in tablegen. The tune list defaults to an empty list to avoid changes to non-X86. This annoyingly increases the size of static tables on all target as we now store 24 more bytes per CPU. I haven't quantified the overall impact, but I can if we're concerned.
One new test is added to X86 to show a few tuning features with mismatched tune-cpu and target-cpu/target-feature attributes to demonstrate independent control. Another new test is added to demonstrate that the scheduler model follows the tune CPU.
I have not added a -mtune to llc/opt or MC layer command line yet. With no attributes we'll just use the -mcpu for both. MC layer tools will always follow the normal CPU for tuning.
Differential Revision: https://reviews.llvm.org/D85165
These are treated identically to value aggregates placed in the kernel
argument list. A %struct.foo or %struct.foo addrspace(4)*
byref(sizeof(%struct.foo)) align(alignof(%struct.foo)) argument should
produce the same offsets and argument metadata.
This handles all 3 kernel ABI implementations, and the two HSA
metadata emission paths.
Summary:
If amdgpu-flat-work-group-size is not specified in LLVM IR, the backend
uses default value of 1024. For this, minimum waves per EU should be 4.
However, backend is still setting minimum value to 1 instead of calculated
value. This is not observed normally as frontend always provide
amdgpu-flat-work-group-size attribute.
Reviewers: rampitec, b-sumner, sameerds, msearles
Reviewed By: rampitec
Subscribers: qcolombet, arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81991
This allows targets to know exactly which operands are contributing to
the dependency, which is required for targets with per-operand
scheduling models.
Differential Revision: https://reviews.llvm.org/D77135
This will likely introduce catastrophic performance regressions on
older subtargets, but should be correct. A follow up change will
remove the old fp32-denormals subtarget features, and switch to using
the new denormal-fp-math/denormal-fp-math-f32 attributes. Frontends
should be making sure to add the denormal-fp-math-f32 attribute when
appropriate to avoid performance regressions.
Summary: I think Max in the name was misleading. NFC.
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76860
The computation here didn't really make sense to me, and reported
wildy different results depending on the flat work group size
attribute.
I think this should really report a range derived from the possible
work group size bounds, and only allow an occupancy that is a multiple
of the group size.
Based on D72931
This adds a new feature called A16 which is enabled for gfx10.
gfx9 keeps the R128A16 feature so it can share all the instruction encodings
with gfx7/8.
Differential Revision: https://reviews.llvm.org/D73956
We are relying on atrificial DAG edges inserted by the
MemOpClusterMutation to keep loads and stores together in the
post-RA scheduler. This does not work all the time since it
allows to schedule a completely independent instruction in the
middle of the cluster.
Removed the DAG mutation and added pass to bundle already
clustered instructions. These bundles are unpacked before the
memory legalizer because it does not work with bundles but also
because it allows to insert waitcounts in the middle of a store
cluster.
Removing artificial edges also allows a more relaxed scheduling.
Differential Revision: https://reviews.llvm.org/D72737
Summary:
This is a follow up on https://reviews.llvm.org/D71473#inline-647262.
There's a caveat here that `Align(1)` relies on the compiler understanding of `Log2_64` implementation to produce good code. One could use `Align()` as a replacement but I believe it is less clear that the alignment is one in that case.
Reviewers: xbolva00, courbet, bollu
Subscribers: arsenm, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, Jim, kerbowa, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D73099
This change allows to model the height of the instruction
within a bundle for latency adjustment purposes.
Differential Revision: https://reviews.llvm.org/D72669
This reverts the AMDGPU DAG mutation implemented in D72487 and gives
a more general way of adjusting BUNDLE operand latency.
It also replaces FixBundleLatencyMutation with adjustSchedDependency
callback in the AMDGPU, fixing not only successor latencies but
predecessors' as well.
Differential Revision: https://reviews.llvm.org/D72535
Previously this would default to 256, not the maximum supported size
of 1024. Using a maximum lower than the hardware maximum requires
language runtimes to enforce this limit for correctness, which no
language has correctly done. Switch the default to the conservatively
correct maximum, and force frontends to opt-in to the more optimal 256
default maximum.
I don't really understand why the changes in occupancy-levels.ll
increased the computed occupancy, which I expected to decrease. I'm
not sure if these tests should be forcing the old maximum.
An SUnit can be neither intruction not SDNode. It is all
null if represents a nop. Fixed a crash on using SU->getInstr().
Differential Revision: https://reviews.llvm.org/D69395
The function could return zero if an extreme number or
registers were used. Minimal possible occupancy is 1.
Differential Revision: https://reviews.llvm.org/D67771
llvm-svn: 372350
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
We had couple places which still return 10 as a maximum
occupancy. Fixed.
Also print comment about occupancy as compiler see it.
Differential Revision: https://reviews.llvm.org/D65423
llvm-svn: 367381
Kazu Hirata