Type records have a unique type index, but symbol records do
not. Instead, symbol records refer to other symbol records
by referencing their offset in the symbol stream. In a sense
this is the analogue of the TypeIndex, but we are not printing
it in the dumper. Printing it not only gives us more useful
information when manually investigating the contents of a PDB,
but also allows us to write better tests by enabling us to
verify that fields that reference other symbol records do
so correctly.
Differential Revision: https://reviews.llvm.org/D34906
llvm-svn: 306890
If the instructions at the beginning of the block have no location,
we're better off using the location of the first instruction in the
current basic block. At the very least, that instruction post-dominates
this one, whereas if we don't emit a .cv_loc directive, we end up using
the potentially invalid location that falls through from the previous
block.
We could probably do better here by emitting some kind of ".cv_loc end"
directive that stops the line table entry of the previous .cv_loc
directive from bleeding out of its basic block. This would improve the
line table when an entire MBB has no valid location info.
llvm-svn: 306889
This reverts commit da6318a92fba793e4f2447ec478b001392d57d43.
This is causing failures on some build bots due to what appears
to be some kind of lit ordering dependency.
llvm-svn: 306833
Presently lit leaks files in the tests' output directories.
Specifically, if a test creates output files, lit makes no
effort to remove them prior to the next test run. This is
problematic because it leads to false positives whenever a
test passes because stale files were present. In general
it is a source of flakiness that should be removed.
This patch addresses this by building the list of all test
directories that are part of the current run set, and then
deleting those directories and recreating them anew. This
gives each test a clean baseline to start from.
Differential Revision: https://reviews.llvm.org/D34732
llvm-svn: 306832
This patch verifies the number of atoms, the validity of the form for each atom, as well as the validity of the
hashdata. For hashdata, we're verifying that the hashdata offset is correct and that the offset in the .debug_info for
each DIE in the hashdata is also valid.
llvm-svn: 306735
This is useful when you want to look at a specific chunk of a
stream or look for discontinuities, and you need to know the
list of blocks occupied by a stream.
llvm-svn: 306150
This patch dumps the raw bytes of the pdb name map which contains
the mapping of stream name to stream index for the string table
and other reserved streams.
llvm-svn: 306148
Normally we can only make sense of the content of a PDB in terms
of streams and blocks, but in some cases it may be useful to dump
bytes at a specific absolute file offset. For example, if you
know that some interesting data is at a particular location and
you want to see some surrounding data.
llvm-svn: 306146
The goal here is to make it possible to display absolute
file offsets when dumping byets from an MSF. The problem is
that when dumping bytes from an MSF, often the bytes will
cross a block boundary and encounter a discontinuity. We
can't use the normal formatBinary() function for this because
this would just treat the sequence as entirely ascending, and
not account out-of-order blocks.
This patch adds a formatMsfData() function to our printer, and
then uses this function to improve the output of the -stream-data
command line option for dumping bytes from a particular stream.
Test coverage is also expanded to make sure to include all possible
scenarios of offsets, sizes, and crossing block boundaries.
llvm-svn: 306141
This idea originally came about when I was doing some deep
investigation of why certain bytes in a PDB that we round-tripped
differed from their original bytes in the source PDB. I found
myself having to hack up the code in many places to dump the
bytes of this substream, or that record. It would be nice if
we could just do this for every possible stream, substream,
debug chunk type, etc.
It doesn't make sense to put this under dump because there's just
so many options that would detract from the more common use case
of just dumping deserialized records. So making a new subcommand
seems like the most logical course of action. In doing so, we
already have two command line options that are suitable for this
new subcommand, so start out by moving them there.
llvm-svn: 306056
Now you run llvm-pdbutil dump <options>. This is a followup
after having renamed the tool, whereas before raw was obviously
just the style of dumping, whereas now "dump" is the action to
perform with the "util".
llvm-svn: 306055
Summary:
This fixes a bug where we always treat APSInts in Codeview as
signed when writing them to YAML. One symptom of this problem is that
llvm-pdbdump raw would show Enumerator Values that differ between the
original PDB and a PDB that has been round-tripped through YAML.
Reviewers: zturner
Reviewed By: zturner
Subscribers: llvm-commits, fhahn
Differential Revision: https://reviews.llvm.org/D34013
llvm-svn: 305965
We forgot to serialize these because llvm-readobj didn't dump them. They
are typically all zeros in an object file. The linker fills them in with
relocations before adding them to the PDB. Now we can properly round
trip these symbols through pdb2yaml -> yaml2pdb.
I made these fields optional with a zero default so that we can elide
them from our test cases.
llvm-svn: 305857
This reverts commit r305852.
The testcase already exists but I moved it to the X86 directory on a
using a different machine and got confused...
llvm-svn: 305856
The instruction it falls over on is an IMPLICT_DEF that also happens
to be the only instruction in its lexical scope. That LexicalScope has
never been created because its range is empty. This patch skips over
all meta-instructions instead of just DBG_VALUEs.
Thanks to David Blaikie for providing a testcase!
llvm-svn: 305853
For the following motivating example
bool c();
void f();
bool start() {
bool result = c();
if (!c()) {
result = false;
goto exit;
}
f();
result = true;
exit:
return result;
}
we would previously generate a single DW_AT_const_value(1) because
only the DBG_VALUE in the second-to-last basic block survived
codegen. This patch improves the heuristic used to determine when a
DBG_VALUE is available at the beginning of its variable's enclosing
lexical scope:
- Stop giving singular constants blanket permission to take over the
entire scope. There is still a special case for constants in the
function prologue that we also miight want to retire later.
- Use the lexical scope information to determine available-at-entry
instead of proximity to the function prologue.
After this patch we generate a location list with a more accurate
narrower availability for the constant true value. As a pleasant side
effect, we also generate inline locations instead of location lists
where a loacation covers the entire range of the enclosing lexical
scope.
Measured on compiling llc with four targets this doesn't have an
effect on compile time and reduces the size of the debug info for llc
by ~600K.
rdar://problem/30286912
llvm-svn: 305599
This resubmits commit c0c249e9f2ef83e1d1e5f166b50673d92f3579d7.
It was broken due to some weird template issues, which have
since been fixed.
llvm-svn: 305517
This reverts commit 83ea17ebf2106859a51fbc2a86031b44d33696ad.
This is failing due to some strange template problems, so reverting
until it can be straightened out.
llvm-svn: 305505
After some internal discussions, we agreed that the raw output style had
outlived its usefulness. It was originally created before we had even
thought of dumping to YAML, and it was intended to give us some insight
into the internals of a PDB file. Now we have YAML mode which does
almost exactly this but is more powerful in that it can round-trip back
to a PDB, which the raw mode could not do. So the raw mode had become
purely a maintenance burden.
One option was to just delete it. However, its original goal was to be
as readable as possible while staying close to the "metal" - i.e.
presenting the output in a way that maps directly to the underlying file
format. We don't actually need that last requirement anymore since it's
covered by the yaml mode, so we could repurpose "raw" mode to actually
just be as readable as possible.
This patch implements about 80% of the functionality previously in raw
mode, but in a completely different style that is more akin to what
cvdump outputs. Records are very compressed, often times appearing on
just one line. One nice thing about this is that it makes full record
matching easier, because you can grep for indices, names, and leaf types
on a single line often.
See the tests for some examples of what the new output looks like.
Note that this patch actually regresses the functionality of raw mode in
a few areas, but only because the patch was already unreasonably large
and going 100% would have been even worse. Specifically, this patch is
missing:
The ability to dump module debug subsections (checksums, lines, etc)
The ability to dump section headers
Aside from that everything is here. While goign through the tests fixing
them all up, I found many duplicate tests. They've been deleted. In
subsequent patches I will go through and re-add the missing
functionality.
Differential Revision: https://reviews.llvm.org/D34191
llvm-svn: 305495
Summary:
This patch is part of 3 patches that together form a single patch, but must be introduced in stages in order not to break things.
The way that LLVM interprets DW_OP_plus in DIExpression nodes is basically that of the DW_OP_plus_uconst operator since LLVM expects an unsigned constant operand. This unnecessarily restricts the DW_OP_plus operator, preventing it from being used to describe the evaluation of runtime values on the expression stack. These patches try to align the semantics of DW_OP_plus and DW_OP_minus with that of the DWARF definition, which pops two elements off the expression stack, performs the operation and pushes the result back on the stack.
This is done in three stages:
• The first patch (LLVM) adds support for DW_OP_plus_uconst.
• The second patch (Clang) contains changes all its uses from DW_OP_plus to DW_OP_plus_uconst.
• The third patch (LLVM) changes the semantics of DW_OP_plus and DW_OP_minus to be in line with its DWARF meaning. This patch includes the bitcode upgrade from legacy DIExpressions.
Patch by Sander de Smalen.
Reviewers: echristo, pcc, aprantl
Reviewed By: aprantl
Subscribers: fhahn, javed.absar, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D33894
llvm-svn: 305386
When we get an unknown symbol type, we might as well at least
dump it. Same goes for round-tripping through YAML, we can
dump the record contents as raw bytes even if we don't know
how to interpret it semantically.
llvm-svn: 305248
This fixes PR33157.
https://bugs.llvm.org//show_bug.cgi?id=33157
We might also think about disallowing duplicate dbg.declare intrinsics
entirely, but this may complicate some passes needlessly.
llvm-svn: 305244
This is to reflect the evolving nature of the tool as being
useful for more than just dumping PDBs, as it can do many other
things.
Differential Revision: https://reviews.llvm.org/D34062
llvm-svn: 305106
Summary:
RelocOffset is a 32-bit value, but we previously truncated it to 16 bits.
Fixes PR33335.
Reviewers: zturner, hiraditya!
Reviewed By: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33968
llvm-svn: 305043
This adds support for Symbols, StringTable, and FrameData subsection
types. Even though these subsections rarely if ever appear in a PDB
file (they are usually in object files), there's no theoretical reason
why they *couldn't* appear in a PDB. The real issue though is that in
order to add support for dumping and writing them (which will be useful
for object files), we need a way to test them. And since there is no
support for reading and writing them to / from object files yet, making
PDB support them is the best way to both add support for the underlying
format and add support for tests at the same time. Later, when we go
to add support for reading / writing them from object files, we'll need
only minimal changes in the underlying read/write code.
llvm-svn: 305037
This is the same change for the YAML Output style applied to the
raw output style. Previously we would queue up all subsections
until every one had been read, and then output them in a pre-
determined order. This was because some subsections need to be
read first in order to properly dump later subsections. This
patch allows them to be dumped in the order they appear.
Differential Revision: https://reviews.llvm.org/D34015
llvm-svn: 305034
The pdb2yaml and raw subcommands did something very
similar but with a different output format, and they
used a lot of the same command line options, but each
one re-implemented the command line option with slightly
different spellings / options. This patch merges them
together into a single definition which is shared by
both subcommands. This new syntax also allows for more
flexibility in the way debug subsections are dumped.
Differential Revision: https://reviews.llvm.org/D33996
llvm-svn: 305032
While it's not entirely clear why a compiler or linker might
put this information into an object or PDB file, one has been
spotted in the wild which was causing llvm-pdbdump to crash.
This patch adds support for reading-writing these sections.
Since I don't know how to get one of the native tools to
generate this kind of debug info, the only test here is one
in which we feed YAML into the tool to produce a PDB and
then spit out YAML from the resulting PDB and make sure that
it matches.
llvm-svn: 304738
Previously we would expect certain subsections to appear
in a certain order because some subsections would reference
other subsections, but in practice we need to support
arbitrary orderings since some object file and PDB file
producers generate them this way. This also paves the
way for supporting Yaml <-> Object File conversion of
CodeView, since Object Files typically have quite a
large number of subsections in their debug info.
Differential Revision: https://reviews.llvm.org/D33807
llvm-svn: 304588
Object files have symbol records not aligned to any particular
boundary (e.g. 1-byte aligned), while PDB files have symbol
records padded to 4-byte aligned boundaries. Since they share
the same reading / writing code, we have to provide an option to
specify the alignment and propagate it up to the producer or
consumer who knows what the alignment is supposed to be for the
given container type.
Added a test for this by modifying the existing PDB -> YAML -> PDB
round-tripping code to round trip symbol records as well as types.
Differential Revision: https://reviews.llvm.org/D33785
llvm-svn: 304484
Zachary Turner