These recently all grew a unique_ptr<TargetLoweringObjectFile> member in
r221878. When anyone calls a virtual method of a class, clang-cl
requires all virtual methods to be semantically valid. This includes the
implicit virtual destructor, which triggers instantiation of the
unique_ptr destructor, which fails because the type being deleted is
incomplete.
This is just part of the ongoing saga of PR20337, which is affecting
Blink as well. Because the MSVC ABI doesn't have key functions, we end
up referencing the vtable and implicit destructor on any virtual call
through a class. We don't actually end up emitting the dtor, so it'd be
good if we could avoid this unneeded type completion work.
llvm-svn: 222480
This is to be consistent with StringSet and ultimately with the standard
library's associative container insert function.
This lead to updating SmallSet::insert to return pair<iterator, bool>,
and then to update SmallPtrSet::insert to return pair<iterator, bool>,
and then to update all the existing users of those functions...
llvm-svn: 222334
Summary:
This has most of what is needed for mips fast-isel call lowering for O32.
What is missing I will add on the next patch because this patch is already too large.
It should not be doing anything wrong but it will punt on some cases that it is basically
capable of doing.
The mechanism is there for parameters to be passed on the stack but I have not enabled it because it serves as a way for now to prevent some of the strange cases of O32 register passing that I have not fully checked yet and have some issues.
The Mips O32 abi rules are very complicated as far how data is passed in floating and integer registers.
However there is a way to think about this all very simply and this implementation reflects that.
Basically, the ABI rules are written as if everything is passed on the stack and aligned as such.
Once that is conceptually done, it is nearly trivial to reassign those locations to registers and
then all the complexity disappears.
So I have told tablegen that all the data is passed on the stack and during the lowering I fix
this by assigning to registers as per the ABI doc.
This has been my approach and you can line up what I did with the ABI document and see 1 to 1 what
is going on.
Test Plan: callabi.ll
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: jholewinski, echristo, ahatanak, llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D5714
llvm-svn: 221948
With this patch MCDisassembler::getInstruction takes an ArrayRef<uint8_t>
instead of a MemoryObject.
Even on X86 there is a maximum size an instruction can have. Given
that, it seems way simpler and more efficient to just pass an ArrayRef
to the disassembler instead of a MemoryObject and have it do a virtual
call every time it wants some extra bytes.
llvm-svn: 221751
Summary:
This patch enables code generation for the MIPS II target. Pre-Mips32
targets don't have the MUL instruction, so we add the correspondent
pattern that uses the MULT/MFLO combination in order to retrieve the
product.
This is WIP as we don't support code generation for select nodes due to
the lack of conditional-move instructions.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6150
llvm-svn: 221686
The canonical name when printing assembly is still $29. The reason is that
GAS does not accept "$hwr_ulr" at the moment.
This addresses the comments from r221307, which reverted the original
commit r221299.
llvm-svn: 221685
The original commit r221299 was reverted in r221307. I removed the name
"hrw_ulr" ($29) from the original commit because two tests were failing.
llvm-svn: 221681
This fixes a few cases of:
* Wrong variable name style.
* Lines longer than 80 columns.
* Repeated names in comments.
* clang-format of the above.
This make the next patch a lot easier to read.
llvm-svn: 221615
Summary:
... and after all that refactoring, it's possible to distinguish softfloat
floating point values from integers so this patch no longer breaks softfloat to
do it.
Remove direct handling of i32's in the N32/N64 ABI by promoting them to
i64. This more closely reflects the ABI documentation and also fixes
problems with stack arguments on big-endian targets.
We now rely on signext/zeroext annotations (already generated by clang) and
the Assert[SZ]ext nodes to avoid the introduction of unnecessary sign/zero
extends.
It was not possible to convert three tests to use signext/zeroext. These tests
are bswap.ll, ctlz-v.ll, ctlz-v.ll. It's not possible to put signext on a
vector type so we just accept the sign extends here for now. These tests don't
pass the vectors the same way clang does (clang puts multiple elements in the
same argument, these map 1 element to 1 argument) so we don't need to worry too
much about it.
With this patch, all known N32/N64 bugs should be fixed and we now pass the
first 10,000 tests generated by ABITest.py.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6117
llvm-svn: 221534
Summary:
One of the calls to AllocateStack (the one in LowerCall) doesn't look like
it should be there but it was there before and removing it breaks the
frame size calculation.
Reviewers: vmedic, theraven
Reviewed By: theraven
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6116
llvm-svn: 221529
Summary:
In addition to the usual f128 workaround, it was also necessary to provide
a means of accessing ArgListEntry::IsFixed.
Reviewers: theraven, vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6111
llvm-svn: 221518
Summary:
In the long run, it should probably become a calling convention in its own
right but for now just move it out of
MipsISelLowering::analyzeCallOperands() so that we can drop this function
in favour of CCState::AnalyzeCallOperands().
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6085
llvm-svn: 221517
Summary:
CCState objects already carry this information in their isVarArg() method.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6084
llvm-svn: 221516
Summary:
As with returns, we must be able to identify f128 arguments despite them
being lowered away. We do this with a pre-analyze step that builds a
vector and then we use this vector from the tablegen-erated code.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6081
llvm-svn: 221461
Summary:
Currently, we give an error if %z is used with non-immediates, instead of continuing as if the %z isn't there.
For example, you use the %z operand modifier along with the "Jr" constraints ("r" makes the operand a register, and "J" makes it an immediate, but only if its value is 0).
In this case, you want the compiler to print "$0" if the inline asm input operand turns out to be an immediate zero and you want it to print the register containing the operand, if it's not.
We give an error in the latter case, and we shouldn't (GCC also doesn't).
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6023
llvm-svn: 221453
Summary:
Improved warning message when using .cpload inside a reorder section and added an error message for using .cpload with Mips16 enabled.
Modified the tests to fit with the changes mentioned above, added a test-case for the N32 ABI in cpload.s and did some reformatting to make the tests easier to read.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5465
llvm-svn: 221447
Summary:
Appropriately set/clear the FeatureBit for Mips16 when these assembler directives are used and also emit ".set nomips16" (previously, only ".set mips16" was being emitted).
These improvements allow for better testing of the .cpload/.cprestore assembler directives (which are not supposed to work when Mips16 is enabled).
Test Plan: The test is bare-bones because there are no MC tests for Mips16 instructions (there's only one, which checks that the Mips16 ELF header flag gets set), and that suggests to me that it has not been implemented yet in the IAS.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5462
llvm-svn: 221277
r221056 "[mips] Move F128 argument handling into MipsCCState as we did for returns. NFC."
r221058 "[mips] Fix unused variable warning introduced in r221056"
r221059 "[mips] Move all ByVal handling into CCState and tablegen-erated code. NFC."
r221061 "Renamed CCState members that appear to misspell 'Processed' as 'Proceed'. NFC."
It cuased an undefined behavior in LLVM :: CodeGen/Mips/return-vector.ll.
llvm-svn: 221081
Summary:
CCState already contains a byval implementation that is very similar to the
Mips custom code. This patch merges the custom code into the existing
common code and tablegen-erated code.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D5977
llvm-svn: 221059
Summary:
There are a couple more changes to make before analyzeFormalArguments can
be merged into the standard AnalyzeFormalArguments. I've had to temporarily
poke a couple holes in MipsCCState's encapsulation to save having to make
all the required changes for this merge all at once*. These will be removed
shortly.
* We must merge our ByVal argument handling with the implementation in CCState.
This will be done over the next three patches, then the fourth will merge
analyzeFormalArguments with AnalyzeFormalArguments.
Depends on D5967
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5969
llvm-svn: 221056
Summary:
It's now passed in as an argument to functions that need it. Eventually
this argument will be replaced by the 'this' pointer for a MipsCCState
object.
Depends on D5966
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5967
llvm-svn: 221054
Summary:
There is one remaining trace of it in MipsCC::analyzeCallOperands() where
Mips16 might override the calling convention. This will moved into
tablegen-erated code later.
Depends on D5965
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5966
llvm-svn: 221053
Summary:
CustomCallingConv is simply a CallingConv that tablegen should not generate the
implementation for. It allows regular CallingConv's to delegate to these custom
functions. This is (currently) necessary for Mips and we cannot use CCCustom
without having to adapt to the different API that CCCustom uses.
This brings us a bit closer to being able to remove
MipsCC::analyzeCallOperands and MipsCC::analyzeFormalArguments in favour of
the common implementation.
No functional change to the targets.
Depends on D3341
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: vmedic, llvm-commits
Differential Revision: http://reviews.llvm.org/D5965
llvm-svn: 221052
Summary:
No functional change yet, it's just an object replacement for an enum.
It will allow us to gather ABI information in a single place so that we can
start testing for properties of the ABI's instead of the ABI itself.
For example we will eventually be able to use:
ABI.MinStackAlignmentInBytes()
instead of:
(isABI_N32() || isABI_N64()) ? 16 : 8
which is clearer and more maintainable.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3341
llvm-svn: 220568
Summary:
i32 is always promoted to i64 so it no longer makes sense to assign i32 to
registers.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5964
llvm-svn: 220561
Summary:
Most structs were fixed by r218451 but those of between >32-bits and
<64-bits remained broken since they were not marked with [ASZ]ExtUpper.
This patch fixes the remaining cases by using
CCPromoteToUpperBitsInType<i64> on i64's in addition to i32 and smaller.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5963
llvm-svn: 220556
Summary:
Backends can use setInsertFencesForAtomic to signal to the middle-end that
montonic is the only memory ordering they can accept for
stores/loads/rmws/cmpxchg. The code lowering those accesses with a stronger
ordering to fences + monotonic accesses is currently living in
SelectionDAGBuilder.cpp. In this patch I propose moving this logic out of it
for several reasons:
- There is lots of redundancy to avoid: extremely similar logic already
exists in AtomicExpand.
- The current code in SelectionDAGBuilder does not use any target-hooks, it
does the same transformation for every backend that requires it
- As a result it is plain *unsound*, as it was apparently designed for ARM.
It happens to mostly work for the other targets because they are extremely
conservative, but Power for example had to switch to AtomicExpand to be
able to use lwsync safely (see r218331).
- Because it produces IR-level fences, it cannot be made sound ! This is noted
in the C++11 standard (section 29.3, page 1140):
```
Fences cannot, in general, be used to restore sequential consistency for atomic
operations with weaker ordering semantics.
```
It can also be seen by the following example (called IRIW in the litterature):
```
atomic<int> x = y = 0;
int r1, r2, r3, r4;
Thread 0:
x.store(1);
Thread 1:
y.store(1);
Thread 2:
r1 = x.load();
r2 = y.load();
Thread 3:
r3 = y.load();
r4 = x.load();
```
r1 = r3 = 1 and r2 = r4 = 0 is impossible as long as the accesses are all seq_cst.
But if they are lowered to monotonic accesses, no amount of fences can prevent it..
This patch does three things (I could cut it into parts, but then some of them
would not be tested/testable, please tell me if you would prefer that):
- it provides a default implementation for emitLeadingFence/emitTrailingFence in
terms of IR-level fences, that mimic the original logic of SelectionDAGBuilder.
As we saw above, this is unsound, but the best that can be done without knowing
the targets well (and there is a comment warning about this risk).
- it then switches Mips/Sparc/XCore to use AtomicExpand, relying on this default
implementation (that exactly replicates the logic of SelectionDAGBuilder, so no
functional change)
- it finally erase this logic from SelectionDAGBuilder as it is dead-code.
Ideally, each target would define its own override for emitLeading/TrailingFence
using target-specific fences, but I do not know the Sparc/Mips/XCore memory model
well enough to do this, and they appear to be dealing fine with the ARM-inspired
default expansion for now (probably because they are overly conservative, as
Power was). If anyone wants to compile fences more agressively on these
platforms, the long comment should make it clear why he should first override
emitLeading/TrailingFence.
Test Plan: make check-all, no functional change
Reviewers: jfb, t.p.northover
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D5474
llvm-svn: 219957
Summary:
In order to support big endian targets for the BuildPairF64 nodes we
just need to swap the low/high pair registers. Additionally, for the
ExtractElementF64 nodes we have to calculate the correct stack offset
with respect to the node's register/operand that we want to extract.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5753
llvm-svn: 219931
Summary:
In order to facilitate use of common code, checking by reviewers of other fast-isel ports, and hopefully to eventually move most of Mips and other fast-isel ports into target independent code, I've tried to get the two implementations to line up.
There is no functional code change. Just methods moved in the file to be in the same order as in AArch64.
Test Plan: No functional change.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, aemerson, rfuhler
Differential Revision: http://reviews.llvm.org/D5692
llvm-svn: 219703
Summary:
Make Mips fast-isel track the form of AArch64 where practical.
This makes it easier for people to review the code, to borrow similar code, and to see how to eventually move a lot of this
target code for fast-isels into target independent code.
These are just cosmetic changes. Should be no functional difference.
Test Plan:
make check
test-suite for 4 flavors mips32 r1/r2 , -O0/-O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: aemerson, llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D5595
llvm-svn: 219633
Summary: Implement the most basic form of conditional branches in Mips fast-isel.
Test Plan:
br1.ll
run 4 flavors of test-suite. mips32 r1/r2 and at -O0/O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, rfuhler
Differential Revision: http://reviews.llvm.org/D5583
llvm-svn: 219556
is over a subset of condition codes.
This fixes the -Werror build which warns about use of uninitialized
variables in the default case.
llvm-svn: 219531
Summary: Add the ability to convert 64 or 32 bit floating point values to integer in mips fast-isel
Test Plan:
fpintconv.ll
ran 4 flavors of test-suite with no errors, misp32 r1/r2 O0/O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits, rfuhler, mcrosier
Differential Revision: http://reviews.llvm.org/D5562
llvm-svn: 219511
Summary:
According to the ABI documentation, f128 and {f128} should both be returned
in $f0 and $f2. However, this doesn't match GCC's behaviour which is to
return f128 in $f0 and $f2, but {f128} in $f0 and $f1.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5578
llvm-svn: 219196
Summary:
The register names t4-t7 are not available in the N32 and N64 ABIs.
This patch prints a warning, when those names are used in N32/64,
along with a fix-it with the correct register names.
Patch by Vasileios Kalintiris
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5272
llvm-svn: 218989
Summary: Implement conversion of 64 to 32 bit floating point numbers (fptrunc) in mips fast-isel
Test Plan:
fptrunc.ll
checked also with 4 internal mips build bot flavors mip32r1/miprs32r2 and at -O0 and -O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: rfuhler
Differential Revision: http://reviews.llvm.org/D5553
llvm-svn: 218785
Summary: It's better if we have a consistent name for .cpload-related functions.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5437
llvm-svn: 218768
doesn't generate lazy binding stub for a function whose address is taken in
the program.
Differential Revision: http://reviews.llvm.org/D5067
llvm-svn: 218744
map, this makes sure that we can compile the same code for two different
ABIs (hard and soft float) in the same module.
Update one testcase accordingly (and fix some confusing naming) and
add a new testcase as well with the ordering swapped which would
highlight the problem.
llvm-svn: 218632
Summary:
This will allow us to handle f128 arguments without duplicating code from
CCState::AnalyzeFormalArguments() or CCState::AnalyzeCallOperands().
No functional change.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5292
llvm-svn: 218509
based on the Function. This is currently used to implement
mips16 support in the mips backend via the existing module
pass resetting the subtarget.
Things to note:
a) This involved running resetTargetOptions before creating a
new subtarget so that code generation options like soft-float
could be recognized when creating the new subtarget. This is
to deal with initialization code in isel lowering that only
paid attention to the initial value.
b) Many of the existing testcases weren't using the soft-float
feature correctly. I've corrected these based on the check
values assuming that was the desired behavior.
c) The mips port now pays attention to the target-cpu and
target-features strings when generating code for a particular
function. I've removed these from one function where the
requested cpu and features didn't match the check lines in
the testcase.
llvm-svn: 218492
Summary:
The N32/N64 ABI's require that structs passed in registers are laid out
such that spilling the register with 'sd' places the struct at the lowest
address. For little endian this is trivial but for big-endian it requires
that structs are shifted into the upper bits of the register.
We also require that structs passed in registers have the 'inreg'
attribute for big-endian N32/N64 to work correctly. This is because the
tablegen-erated calling convention implementation only has access to the
lowered form of struct arguments (one or more integers of up to 64-bits
each) and is unable to determine the original type.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5286
llvm-svn: 218451
Summary:
The N32/N64 ABI's return f128 values in $f0 and $f2 for hard-float and $v0 and
$a0 for soft-float. The registers used in the soft-float case differ from the
usual $v0, and $v1 specified for return values.
Both cases were previously handled by duplicating the CCState::AnalyzeReturn()
and CCState::AnalyzeCallReturn() functions and modifying them to delegate to
a different assignment function for f128 and further replace the register type
for the hard-float case. There is a simpler way to do both of these.
We now use the common functions and select an initial assignment function based
on whether the original type is f128 or not. We then handle the hard-float case
using CCBitConvertToType<>.
No functional change.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5269
llvm-svn: 218036
Summary: This directive is used to tell the assembler to reject DSP-specific instructions.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D5142
llvm-svn: 217946
Summary: Changed error messages to be more informative and to resemble other clang/llvm error messages (first letter is lower case, no ending punctuation) and updated corresponding tests.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D5065
llvm-svn: 217873
Summary:
Expand list of supported targets for Mips to include mips32 r1.
Previously it only include r2. More patches are coming where there is
a difference but in the current patches as pushed upstream, r1 and r2
are equivalent.
Test Plan:
simplestorefp1.ll
add new build bots at mips to test this flavor at both -O0 and -O2
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D5306
llvm-svn: 217821
This commit adds aliases for the sync instruction (synciobdma,
syncs, syncw, syncws) which are used by the Octeon CPU.
Reviewed by D. Sanders
llvm-svn: 217477
Summary:
This directive is used to reset the assembler options to their initial values.
Assembly programmers use it in conjunction with the ".set mipsX" directives.
This patch depends on the .set push/pop directive (http://reviews.llvm.org/D4821).
Contains work done by Matheus Almeida.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4957
llvm-svn: 217438
Summary:
The GPR size is more a property of the subtarget than that of the ABI so move
this information to the MipsSubtarget.
No functional change.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5009
llvm-svn: 217436
Summary:
These directives are used to save the current assembler options (in the case of ".set push") and restore the previously saved options (in the case of ".set pop").
Contains work done by Matheus Almeida.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4821
llvm-svn: 217432
Summary: Found a couple of cases where unsigned was still being used. These two should be the last ones in the (entire) Mips backend.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D5028
llvm-svn: 217257
Summary: Use the naming convention from the LLVM Coding Standards.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4972
llvm-svn: 217254
Summary: There are still some functions which should be renamed, but they are inherited from the generic MC classes.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D5068
llvm-svn: 217145
This is the final round of renaming. This changes tblgen to emit lower-case
function names for FastEmitInst_* and FastEmit_*, and updates all its uses
in the source code.
Reviewed by Eric
llvm-svn: 217075
Summary:
This directive is similar to ".set mipsX".
It is used to change the CPU target of the assembler, enabling it to accept instructions for a specific CPU.
This patch only implements the r4000 CPU (which is treated internally as generic mips3) and the generic ISAs.
Contains work done by Matheus Almeida.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4884
llvm-svn: 215978
ARM in particular is getting dangerously close to exceeding 32 bits worth of
possible subtarget features. When this happens, various parts of MC start to
fail inexplicably as masks get truncated to "unsigned".
Mostly just refactoring at present, and there's probably no way to test.
llvm-svn: 215887
It causes a number of regressions when -fintegrated-as is enabled. This happens
because there are codegen-only instructions that incorrectly uses the first
operand as the encoding for the $fcc register. The regressions do not occur when
-via-file-asm is also given.
llvm-svn: 215847
Summary:
This pseudo-instruction allows the programmer to load an address from a symbolic expression into a register.
Patch by David Chisnall.
His work was sponsored by: DARPA, AFRL
I've made some minor changes to the original, such as improving the formatting and adding some comments, and I've also added a test case.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4808
llvm-svn: 215630
Summary:
getCanHaveModuleDir() is renamed to isModuleDirectiveAllowed(), and
setCanHaveModuleDir() is renamed to forbidModuleDirective() since it is only
ever given a false argument.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4885
llvm-svn: 215628
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
llvm-svn: 215558
Summary:
Moved some calls to setCanHaveModuleDir to the MipsTargetStreamer base class and removed the resulting empty functions from the MipsTargetELFStreamer class.
Also fixed a missing call to setCanHaveModuleDir in MipsTargetELFStreamer::emitDirectiveSetMicroMips.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: tomatabacu
Differential Revision: http://reviews.llvm.org/D4781
llvm-svn: 215542
Patch by Matheus Almeida and Toma Tabacu
The lld test failure on the previous attempt to commit was caused by the
addition of the .pdr section causing the offsets it was checking to change.
This has been fixed by removing the .ent/.end directives from that test since
they weren't really needed.
llvm-svn: 215535
Also added the testcase that should have been in r215194.
This behaviour has surprised me a few times now. The problem is that the
generated MipsSubtarget::ParseSubtargetFeatures() contains code like this:
if ((Bits & Mips::FeatureABICalls) != 0) IsABICalls = true;
so '-abicalls' means 'leave it at the default' and '+abicalls' means 'set it to
true'. In this case, (and the similar -modd-spreg case) I'd like the code to be
IsABICalls = (Bits & Mips::FeatureABICalls) != 0;
or possibly:
if ((Bits & Mips::FeatureABICalls) != 0)
IsABICalls = true;
else
IsABICalls = false;
and preferably arrange for 'Bits & Mips::FeatureABICalls' to be true by default
(on some triples).
llvm-svn: 215211
This patch implements the main rules for -mno-abicalls such as reserving $gp,
and emitting the correct .option directive.
Patch by Matheus Almeida and Toma Tabacu
Differential Revision: http://reviews.llvm.org/D4231
llvm-svn: 215194
a base GOT entry.
Summary:
get tip of tree mips fast-isel to pass test-suite
Two bugs were fixed:
1) one bit booleans were treated as 1 bit signed integers and so the literal '1' could become sign extended.
2) mips uses got for pic but in certain cases, as with string constants for example, many items can be referenced from the same got entry and this case was not handled properly.
Test Plan: test-suite
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: mcrosier
Differential Revision: http://reviews.llvm.org/D4801
llvm-svn: 215155
be deleted. This will be reapplied as soon as possible and before
the 3.6 branch date at any rate.
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reverts commits r215111, 215115, 215116, 215117, 215136.
llvm-svn: 215154
I am sure we will be finding bits and pieces of dead code for years to
come, but this is a good start.
Thanks to Lang Hames for making MCJIT a good replacement!
llvm-svn: 215111
Summary:
These directives are used to toggle whether the assembler accepts MSA-specific instructions or not.
Patch by Matheus Almeida and Toma Tabacu.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4783
llvm-svn: 215099
The commit after this changes { } and 0bxx literals to be of type bits<n> and not int. This means we need to write exactly the right number of bits, and not rely on the values being silently zero extended for us.
llvm-svn: 215082
to get the subtarget and that's accessible from the MachineFunction
now. This helps clear the way for smaller changes where we getting
a subtarget will require passing in a MachineFunction/Function as
well.
llvm-svn: 214988
shorter/easier and have the DAG use that to do the same lookup. This
can be used in the future for TargetMachine based caching lookups from
the MachineFunction easily.
Update the MIPS subtarget switching machinery to update this pointer
at the same time it runs.
llvm-svn: 214838
Summary:
This patch also fixes an issue with the way the Mips assembler enables/disables architecture
features. Before this patch, the assembler never disabled feature bits. For example,
.set mips64
.set mips32r2
would result in the 'OR' of mips64 with mips32r2 feature bits which isn't right.
Unfortunately this isn't trivial to fix because there's not an easy way to clear
feature bits as the algorithm in MCSubtargetInfo (ToggleFeature) only clears the bits
that imply the feature being cleared and not the implied bits by the feature (there's a
better explanation to the code I added).
Patch by Matheus Almeida and updated by Toma Tabacu
Reviewers: vmedic, matheusalmeida, dsanders
Reviewed By: dsanders
Subscribers: tomatabacu, llvm-commits
Differential Revision: http://reviews.llvm.org/D4123
llvm-svn: 214709
fromulation of the node, which isn't really the desired behavior from
within the combiner or legalizer, but is necessary within ISel. I've
added a hopefully helpful comment and fixed the only two places where
this took place.
Yet another step toward the combiner and legalizer not needing to use
update listeners with virtual calls to manage the worklists behind
legalization and combining.
llvm-svn: 214574
so that we can use it to get the old-style JIT out of the subtarget.
This code should be removed when the old-style JIT is removed
(imminently).
llvm-svn: 214560
Summary:
Big-endian mode was not correctly adjusting the offset for types smaller
than an ABI slot.
Fixes PR19612
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: sstankovic, llvm-commits
Differential Revision: http://reviews.llvm.org/D4556
llvm-svn: 214493
Currently when DAGCombine converts loads feeding a switch into a switch of
addresses feeding a load the new load inherits the isInvariant flag of the left
side. This is incorrect since invariant loads can be reordered in cases where it
is illegal to reoarder normal loads.
This patch adds an isInvariant parameter to getExtLoad() and updates all call
sites to pass in the data if they have it or false if they don't. It also
changes the DAGCombine to use that data to make the right decision when
creating the new load.
llvm-svn: 214449
Rename to allowsMisalignedMemoryAccess.
On R600, 8 and 16 byte accesses are mostly OK with 4-byte alignment,
and don't need to be split into multiple accesses. Vector loads with
an alignment of the element type are not uncommon in OpenCL code.
llvm-svn: 214055
In order to enable the preservation of noalias function parameter information
after inlining, and the representation of block-level __restrict__ pointer
information (etc.), additional kinds of aliasing metadata will be introduced.
This metadata needs to be carried around in AliasAnalysis::Location objects
(and MMOs at the SDAG level), and so we need to generalize the current scheme
(which is hard-coded to just one TBAA MDNode*).
This commit introduces only the necessary refactoring to allow for the
introduction of other aliasing metadata types, but does not actually introduce
any (that will come in a follow-up commit). What it does introduce is a new
AAMDNodes structure to hold all of the aliasing metadata nodes associated with
a particular memory-accessing instruction, and uses that structure instead of
the raw MDNode* in AliasAnalysis::Location, etc.
No functionality change intended.
llvm-svn: 213859
Summary: The ll and sc instructions for r6 and non-r6 are misplaced. This patch fixes that.
Patch by Jyun-Yan You
Differential Revision: http://reviews.llvm.org/D4578
llvm-svn: 213847
This pass attempts to speculatively use a sqrt instruction if one exists on the target, falling back to a libcall if the target instruction returned NaN.
This was enabled for MIPS and System-Z, but is well guarded and is good for most targets - GCC does this for (that I've checked) X86, ARM and AArch64.
llvm-svn: 213752
We now emit this value when we need to contradict the default value. This
restores support for binutils 2.24.
When a suitable binutils has been released we can resume unconditionally
emitting .module directives. This is preferable to omitting the .module
directives since the .module directives protect against, for example,
accidentally assembling FP32 code with -mfp64 and producing an unusuable object.
llvm-svn: 213548
This abstraction allows us to support the various records that can be placed in
the .MIPS.options section in the future. We currently use it to record register
usage information (the ODK_REGINFO record in our ELF64 spec).
Each .MIPS.options record should subclass MipsOptionRecord and provide an
implementation of EmitMipsOptionRecord.
Patch by Matheus Almeida and Toma Tabacu
llvm-svn: 213522
Fix a dangerous default case that caused MipsCodeEmitter to discard pseudo
instructions it didn't recognize. It will now call llvm_unreachable() for
unrecognized pseudo's and explicitly handles PseudoReturn, PseudoReturn64,
PseudoIndirectBranch, PseudoIndirectBranch64, CFI_INSTRUCTION, IMPLICIT_DEF,
and KILL.
There may be other pseudos that need handling but this was enough for the
ExecutionEngine tests to pass on my test system.
llvm-svn: 213513
We now emit this directive when we need to contradict the default value (e.g.
-mno-odd-spreg is given) or an option changed the default value (e.g. -mfpxx
is given).
This restores support for the currently available head of binutils. However,
at this point binutils 2.24 is still not sufficient since it does not support
'.module fp=...'.
llvm-svn: 213511
As discussed in a previous checking to support the .localentry
directive on PowerPC, we need to inspect the actual target symbol
in needsRelocateWithSymbol to make the appropriate decision based
on that symbol's st_other bits.
Currently, needsRelocateWithSymbol does not get the target symbol.
However, it is directly available to its sole caller. This patch
therefore simply extends the needsRelocateWithSymbol by a new
parameter "const MCSymbolData &SD", passes in the target symbol,
and updates all derived implementations.
In particular, in the PowerPC implementation, this patch removes
the FIXME added by the previous checkin.
llvm-svn: 213487
a) Move the replacement level decision to the target machine.
b) Create additional subtargets at the TargetMachine level to
cache and make replacement easy.
c) Make the mips16 features obvious.
d) Remove the override logic as it no longer does anything.
e) Have MipsModuleDAGToDAGISel take only the target machine.
f) Have the constant islands pass grab the current subtarget
from the MachineFunction (via the TargetMachine) instead
of caching it.
g) Unconditionally initialize TLOF.
h) Remove the old complicated subtarget based resetting and
replace it with simple conditionals.
llvm-svn: 213430
two reasons:
a) we're already caching the target machine which contains it,
b) which relocation model you get is dependent upon whether or
not you ask before MCCodeGenInfo is constructed on the target
machine, so avoid any latent issues there.
llvm-svn: 213420
Options struct and move the comment to inMips16HardFloat. Use the
fact that we now know whether or not we cared about soft float to
set the libcalls.
Accordingly rename mipsSEUsesSoftFloat to abiUsesSoftFloat and
propagate since it's no longer CPU specific.
llvm-svn: 213335
Summary:
Generally speaking, mips-* vs mips64-* should not be used to make decisions
about the content or format of the ELF. This should be based on the ABI
and CPU in use. For example, `mips-linux-gnu-clang -mips64r2 -mabi=64`
should produce an ELF64 as should `mips64-linux-gnu-clang -mabi=64`.
Conversely, `mips64-linux-gnu-clang -mabi=n32` should produce an ELF32 as
should `mips-linux-gnu-clang -mips64r2 -mabi=n32`.
This patch fixes the e_flags but leaves the ELF32 vs ELF64 issue for now
since there is no apparent way to base this decision on the ABI and CPU.
Differential Revision: http://reviews.llvm.org/D4539
llvm-svn: 213244
Summary:
The cpr1_size field describes the minimum register width to run the program
rather than the size of the registers on the target. MIPS32r6 was acting
as if -mfp64 has been given because it starts off with 64-bit FPU registers.
Differential Revision: http://reviews.llvm.org/D4538
llvm-svn: 213243
Summary:
These options are not implemented yet but we act as if they are always
given.
The integrated assembler is driven by the clang driver so the e_flag test
cases should match the e_flags emitted by GCC+GAS rather than GAS
by itself.
Differential Revision: http://reviews.llvm.org/D4536
llvm-svn: 213242
Summary:
A few instructions (mostly cvt.d.w and similar) are causing problems with
-mfp64 and -mno-odd-spreg and it looks like fixing it properly may
take several weeks. In the meantime, let's disable the odd-numbered
double-precision registers so that the generated code is at least valid.
The problem is that instructions like cvt.d.w read from the 32-bit low
subregister of a double-precision FPU register. This often leads to the compiler
to inserting moves to transfer a GPR32 to a FGR32 using mtc1. Such moves
violate the rules against 32-bit writes to odd-numbered FPU registers imposed
by -mno-odd-spreg. By disabling the odd-numbered double-precision registers, it
becomes impossible for the 32-bit low subregister to be odd-numbered.
This fixes numerous test-suite failures when compiling for the FP64A ABI
('-mfp64 -mno-odd-spreg'). There is no LLVM test case because it's difficult to
test that odd-numbered FPU registers are not allocatable. Instead, we depend on
the assembler (GAS and -fintegrated-as) raising errors when the rules are
violated.
Differential Revision: http://reviews.llvm.org/D4532
llvm-svn: 213160
Refactoring; no functional changes intended
Removed PostRAScheduler bits from subtargets (X86, ARM).
Added PostRAScheduler bit to MCSchedModel class.
This bit is set by a CPU's scheduling model (if it exists).
Removed enablePostRAScheduler() function from TargetSubtargetInfo and subclasses.
Fixed the existing enablePostMachineScheduler() method to use the MCSchedModel (was just returning false!).
Added methods to TargetSubtargetInfo to allow overrides for AntiDepBreakMode, CriticalPathRCs, and OptLevel for PostRAScheduling.
Added enablePostRAScheduler() function to PostRAScheduler class which queries the subtarget for the above values.
Preserved existing scheduler behavior for ARM, MIPS, PPC, and X86:
a. ARM overrides the CPU's postRA settings by enabling postRA for any non-Thumb or Thumb2 subtarget.
b. MIPS overrides the CPU's postRA settings by enabling postRA for everything.
c. PPC overrides the CPU's postRA settings by enabling postRA for everything.
d. X86 is the only target that actually has postRA specified via sched model info.
Differential Revision: http://reviews.llvm.org/D4217
llvm-svn: 213101
Summary: Previously all the test cases set it after initialization with '.module fp=xx'.
Differential Revision: http://reviews.llvm.org/D4489
llvm-svn: 213071
Summary:
.bss, .text, and .data are at least 16-byte aligned.
.reginfo is 4-byte aligned and has a 24-byte EntrySize.
.MIPS.abiflags has an 24-byte EntrySize.
.MIPS.options is 8-byte aligned and has 1-byte EntrySize.
Using a 1-byte EntrySize for .MIPS.options seems strange because the
records are neither 1-byte long nor fixed-length but this matches the value
that GAS emits.
Differential Revision: http://reviews.llvm.org/D4487
llvm-svn: 212939
Summary:
This is because the FP64A the hardware will redirect 32-bit reads/writes
from/to odd-numbered registers to the upper 32-bits of the corresponding
even register. In effect, simulating FR=0 mode when FR=0 mode is not
available.
Unfortunately, we have to make the decision to avoid mfc1/mtc1 before
register allocation so we currently do this for even registers too.
FPXX has a similar requirement on 32-bit architectures that lack
mfhc1/mthc1 so this patch also handles the affected moves from the FPU for
FPXX too. Moves to the FPU were supported by an earlier commit.
Differential Revision: http://reviews.llvm.org/D4484
llvm-svn: 212938
Summary:
This is similar to r210771 which did the same thing for MTHC1.
Also corrected MTHC1_D32 and MTHC1_D64 which used AFGR64 and FGR64 on the
wrong definitions.
Differential Revision: http://reviews.llvm.org/D4483
llvm-svn: 212936
enabled and mthc1 and dmtc1 are not available (e.g. on MIPS32r1)
This prevents the upper 32-bits of a double precision value from being moved to
the FPU with mtc1 to an odd-numbered FPU register. This is necessary to ensure
that the code generated executes correctly regardless of the current FPU mode.
MIPS32r2 and above continues to use mtc1/mthc1, while MIPS-IV and above continue
to use dmtc1.
Differential Revision: http://reviews.llvm.org/D4465
llvm-svn: 212930
passes in the mips back end. This, unfortunately, required a
bit of churn in the various predicates to use a pointer rather
than a reference.
llvm-svn: 212744
Summary:
When -mno-odd-spreg is in effect, 32-bit floating point values are not
permitted in odd FPU registers. The option also prohibits 32-bit and 64-bit
floating point comparison results from being written to odd registers.
This option has three purposes:
* It allows support for certain MIPS implementations such as loongson-3a that
do not allow the use of odd registers for single precision arithmetic.
* When using -mfpxx, -mno-odd-spreg is the default and this allows us to
statically check that code is compliant with the O32 FPXX ABI since mtc1/mfc1
instructions to/from odd registers are guaranteed not to appear for any
reason. Once this has been established, the user can then re-enable
-modd-spreg to regain the use of all 32 single-precision registers.
* When using -mfp64 and -mno-odd-spreg together, an O32 extension named
O32 FP64A is used as the ABI. This is intended to provide almost all
functionality of an FR=1 processor but can also be executed on a FR=0 core
with the assistance of a hardware compatibility mode which emulates FR=0
behaviour on an FR=1 processor.
* Added '.module oddspreg' and '.module nooddspreg' each of which update
the .MIPS.abiflags section appropriately
* Moved setFpABI() call inside emitDirectiveModuleFP() so that the caller
doesn't have to remember to do it.
* MipsABIFlags now calculates the flags1 and flags2 member on demand rather
than trying to maintain them in the same format they will be emitted in.
There is one portion of the -mfp64 and -mno-odd-spreg combination that is not
implemented yet. Moves to/from odd-numbered double-precision registers must not
use mtc1. I will fix this in a follow-up.
Differential Revision: http://reviews.llvm.org/D4383
llvm-svn: 212717
Summary:
On MIPS32r6/MIPS64r6, floating point comparisons return 0 or -1 but integer
comparisons return 0 or 1.
Updated the various uses of getBooleanContents. Two simplifications had to be
disabled when float and int boolean contents differ:
- ScalarizeVecRes_VSELECT except when the kind of boolean contents is trivially
discoverable (i.e. when the condition of the VSELECT is a SETCC node).
- visitVSELECT (select C, 0, 1) -> (xor C, 1).
Come to think of it, this one could test for the common case of 'C'
being a SETCC too.
Preserved existing behaviour for all other targets and updated the affected
MIPS32r6/MIPS64r6 tests. This also fixes the pi benchmark where the 'low'
variable was counting in the wrong direction because it thought it could simply
add the result of the comparison.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, jholewinski, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D4389
llvm-svn: 212697
Summary:
It seems we accidentally read the wrong column of the table MIPS64r6 spec
and used the names for c.cond.fmt instead of cmp.cond.fmt.
Differential Revision: http://reviews.llvm.org/D4387
llvm-svn: 212607
Summary:
This completes the change to use JALR instead of JR on MIPS32r6/MIPS64r6.
Reviewers: jkolek, vmedic, zoran.jovanovic, dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4269
llvm-svn: 212605
Summary:
RET, and RET_MM have been replaced by a pseudo named PseudoReturn.
In addition a version with a 64-bit GPR named PseudoReturn64 has been
added.
Instruction selection for a return matches RetRA, which is expanded post
register allocation to PseudoReturn/PseudoReturn64. During MipsAsmPrinter,
this PseudoReturn/PseudoReturn64 are emitted as:
- (JALR64 $zero, $rs) on MIPS64r6
- (JALR $zero, $rs) on MIPS32r6
- (JR_MM $rs) on microMIPS
- (JR $rs) otherwise
On MIPS32r6/MIPS64r6, 'jr $rs' is an alias for 'jalr $zero, $rs'. To aid
development and review (specifically, to ensure all cases of jr are
updated), these aliases are temporarily named 'r6.jr' instead of 'jr'.
A follow up patch will change them back to the correct mnemonic.
Added (JALR $zero, $rs) to MipsNaClELFStreamer's definition of an indirect
jump, and removed it from its definition of a call.
Note: I haven't accounted for MIPS64 in MipsNaClELFStreamer since it's
doesn't appear to account for any MIPS64-specifics.
The return instruction created as part of eh_return expansion is now expanded
using expandRetRA() so we use the right return instruction on MIPS32r6/MIPS64r6
('jalr $zero, $rs').
Also, fixed a misuse of isABI_N64() to detect 64-bit wide registers in
expandEhReturn().
Reviewers: jkolek, vmedic, mseaborn, zoran.jovanovic, dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4268
llvm-svn: 212604
Summary:
Follow on to r212519 to improve the encapsulation and limit the scope of the enums.
Also merged two very similar parser functions, fixed a bug where ASE's
were not being reported, and marked CPR1's as being 128-bit when MSA is
enabled.
Differential Revision: http://reviews.llvm.org/D4384
llvm-svn: 212522
We have detected a documentation bug in the encoding tables of the released
MIPS64r6 specification that has resulted in the wrong encodings being used for
these instructions in LLVM. This commit corrects them.
llvm-svn: 212330
Reid Kleckner