We don't always have FMA, for example when using 'clang -mavx512f'
without an explicit CPU.
Also check for an explicit +avx512f instead of CPUs in a couple
related tests.
llvm-svn: 240616
Summary
This change turns on the emission of
__LLVM_Stackmaps section when generating COFF binaries.
Test Plan
Added a scenario to the test case:
test\CodeGen\X86\statepoint-stackmap-format.ll.
Code Review:
http://reviews.llvm.org/D10680
llvm-svn: 240613
Summary:
This patch fixes PR23405 (https://llvm.org/bugs/show_bug.cgi?id=23405).
During a node unscheduling an entry in LiveRegGens can be replaced with a new value. That corrupts the live reg tracking and LiveReg* structure is not cleared as should be during unscheduling. Problematic condition that enforces Gen replacement is `I->getSUnit()->getHeight() < LiveRegGens[I->getReg()]->getHeight()`. This condition should be checked only if LiveRegGen was set in current node unscheduling.
Test Plan: Regression test included.
Reviewers: hfinkel, atrick
Reviewed By: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9993
llvm-svn: 240538
We used to erroneously match:
(v4i64 shuffle (v2i64 load), <0,0,0,0>)
Whereas vbroadcasti128 is more like:
(v4i64 shuffle (v2i64 load), <0,1,0,1>)
This problem doesn't exist for vbroadcastf128, which kept matching
the intrinsic after r231182. We should perhaps re-introduce the
intrinsic here as well, but that's a separate issue still being
discussed.
While there, add some proper vbroadcastf128 tests. We don't currently
match those, like for loading vbroadcastsd/ss on AVX (the reg-reg
broadcasts where added in AVX2).
Fixes PR23886.
llvm-svn: 240488
Currently ( D10321, http://reviews.llvm.org/rL239486 ), we can use the machine combiner pass
to reassociate the following sequence to reduce the critical path:
A = ? op ?
B = A op X
C = B op Y
-->
A = ? op ?
B = X op Y
C = A op B
'op' is currently limited to x86 AVX scalar FP adds (with fast-math on), but in theory, it could
be any associative math/logic op (see TODO in code comment).
This patch generalizes the pattern match to ignore the instruction that defines 'A'. So instead of
a sequence of 3 adds, we now only need to find 2 dependent adds and decide if it's worth
reassociating them.
This generalization has a compile-time cost because we can now match more instruction sequences
and we rely more heavily on the machine combiner to discard sequences where reassociation doesn't
improve the critical path.
For example, in the new test case:
A = M div N
B = A add X
C = B add Y
We'll match 2 reassociation patterns, but this transform doesn't reduce the critical path:
A = M div N
B = A add Y
C = B add X
We need the combiner to reject that pattern but select this:
A = M div N
B = X add Y
C = B add A
Differential Revision: http://reviews.llvm.org/D10460
llvm-svn: 240361
The _Int instructions are special, in that they operate on the full
VR128 instead of FR32. The load folding then looks at MOVSS, at the
user, and bails out when it sees a size mismatch.
What we really know is that the rm_Int instructions don't load the
higher lanes, so folding is fine.
This happens for the straightforward intrinsic code, e.g.:
_mm_add_ss(a, _mm_load_ss(p));
Fixes PR23349.
Differential Revision: http://reviews.llvm.org/D10554
llvm-svn: 240326
D8982 ( checked in at http://reviews.llvm.org/rL239001 ) added command-line
options to allow reciprocal estimate instructions to be used in place of
divisions and square roots.
This patch changes the default settings for x86 targets to allow that recip
codegen (except for scalar division because that breaks too much code) when
using -ffast-math or its equivalent.
This matches GCC behavior for this kind of codegen.
Differential Revision: http://reviews.llvm.org/D10396
llvm-svn: 240310
Summary:
The parser is exercised by llvm-objdump using -print-fault-maps. As is
probably obvious, the code itself was "heavily inspired" by
http://reviews.llvm.org/D10434.
Reviewers: reames, atrick, JosephTremoulet
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10491
llvm-svn: 240304
Summary: The code responsible for shl folding in the DAGCombiner was assuming incorrectly that all constants are less than 64 bits. This patch simply changes the way values are compared.
Test Plan: A regression test included.
Reviewers: andreadb
Reviewed By: andreadb
Subscribers: andreadb, test, llvm-commits
Differential Revision: http://reviews.llvm.org/D10602
llvm-svn: 240291
This allows more call sequences to use pushes instead of movs when optimizing for size.
In particular, calling conventions that pass some parameters in registers (e.g. thiscall) are now supported.
Differential Revision: http://reviews.llvm.org/D10500
llvm-svn: 240257
Sparse switches with profile info are lowered as weight-balanced BSTs. For
example, if the node weights are {1,1,1,1,1,1000}, the right-most node would
end up in a tree by itself, bringing it closer to the top.
However, a leaf in this BST can contain up to 3 cases, and having a single
case in a leaf node as in the example means the tree might become
unnecessarily high.
This patch adds a heauristic to the pivot selection algorithm that moves more
cases into leaf nodes unless that would lower their rank. It still doesn't
yield the optimal tree in every case, but I believe it's conservatibely correct.
llvm-svn: 240224
To same compile time, the analysis to find dense case-clusters in switches is
not done at -O0. However, when the whole switch is dense enough, it is easy to
turn it into a jump table, resulting in much faster code with no extra effort.
llvm-svn: 240071
1. Used update_llc_test_checks.py to tighten checks
2. Fixed triple (nothing Darwin-specific here)
3. Replaced CPU specifiers with attributes
4. Fixed comments
5. Removed IvyBridge run because it did not add any coverage
llvm-svn: 240058
- zext the value to alloc size first, then check if the value repeats
with zero padding included. If so we can still emit a .space
- Do the checking with APInt.isSplat(8), which handles non-pow2 types
- Also handle large constants (bit width > 64)
- In a ConstantArray all elements have the same type, so it's sufficient
to check the first constant recursively and then just compare if all
following constants are the same by pointer compare
llvm-svn: 239977
Added explicit sign extension for v4i16/v8i16 to v4i32/v8i32 before conversion to floats. Matches existing support for v4i8/v8i8.
Follow up to D10433
llvm-svn: 239966
The personality routine currently lives in the LandingPadInst.
This isn't desirable because:
- All LandingPadInsts in the same function must have the same
personality routine. This means that each LandingPadInst beyond the
first has an operand which produces no additional information.
- There is ongoing work to introduce EH IR constructs other than
LandingPadInst. Moving the personality routine off of any one
particular Instruction and onto the parent function seems a lot better
than have N different places a personality function can sneak onto an
exceptional function.
Differential Revision: http://reviews.llvm.org/D10429
llvm-svn: 239940
Change builtin function name and signature ( add third parameter - rounding mode ).
Added tests for intrinsics.
Differential Revision: http://reviews.llvm.org/D10473
llvm-svn: 239888
This patch enables support for the conversion of v2i32 to v2f64 to use the CVTDQ2PD xmm instruction and stay on the SSE unit instead of scalarizing, sign extending to i64 and using CVTSI2SDQ scalar conversions.
Differential Revision: http://reviews.llvm.org/D10433
llvm-svn: 239855
Reapply r239539. Don't assume the collected number of
stores is the same vector size. Just take the first N
stores to fill the vector.
llvm-svn: 239825
When we multiply two 64-bit vectors, we extract lower and upper part and use the PMULUDQ instruction.
When one of the operands is a constant, the upper part may be zero, we know this at compile time.
Example: %a = mul <4 x i64> %b, <4 x i64> < i64 5, i64 5, i64 5, i64 5>.
I'm checking the value of the upper part and prevent redundant "multiply", "shift" and "add" operations.
llvm-svn: 239802
Benjamin Kramer