Frame Descriptor Entries (FDEs) have a pointer back to a Common Information
Entry (CIE) that describes how the rest FDE should be parsed. JITLink had been
assuming that FDEs always referred to the most recent CIE encountered, but the
spec allows them to point back to any previously encountered CIE. This patch
fixes JITLink to look up the correct CIE for the FDE.
The testcase is a MachO binary with an FDE that refers to a CIE that is not the
one immediately proceeding it (the layout can be viewed wit
'dwarfdump --eh-frame <testcase>'. This test case had to be a binary as llvm-mc
now sorts FDEs (as of r356216) to ensure FDEs *do* point to the most recent CIE.
llvm-svn: 359105
This makes the variables naming to match LLVM style,
simplifies the code used to extract the group members,
simplifies the loop and reorders the code around a bit.
llvm-svn: 359101
If the types don't match, we can't just remove the shuffle.
There may be some other opportunity for optimization here,
but this should prevent the crashing seen in:
https://bugs.llvm.org/show_bug.cgi?id=41414
llvm-svn: 359095
If two .res files contain the same resource, cvtres.exe (and hence
link.exe) reject the input with this message:
CVTRES : fatal error CVT1100: duplicate resource. type:STRING, name:101, language:0x0409
LINK : fatal error LNK1123: failure during conversion to COFF: file invalid or corrupt
llvm-cvtres (and lld-link) used to silently pick one of the duplicate
resources instead. This patch makes them report an error as well.
We slightly improve on cvtres by printing the name of two .res files
containing duplicate entries as well.
Differential Revision: https://reviews.llvm.org/D61049
llvm-svn: 359083
Summary:
Both the input Value pointer and the returned Value
pointers in GetUnderlyingObjects are now declared as
const.
It turned out that all current (in-tree) uses of
GetUnderlyingObjects were trivial to update, being
satisfied with have those Value pointers declared
as const. Actually, in the past several of the users
had to use const_cast, just because of ValueTracking
not providing a version of GetUnderlyingObjects with
"const" Value pointers. With this patch we get rid
of those const casts.
Reviewers: hfinkel, materi, jkorous
Reviewed By: jkorous
Subscribers: dexonsmith, jkorous, jholewinski, sdardis, eraman, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61038
llvm-svn: 359072
Summary:
The MachineFunction should have been created with the correct subtarget. As
long as there is no way to change it, MipsTargetMachine can just capture it
directly from the MachineFunction without calling getSubtargetImpl again.
While there, const correct the Subtarget pointer to avoid a const_cast.
I believe the Mips16Subtarget and NoMips16Subtarget members are never used, but
I'll leave there removal for a separate patch.
Reviewers: echristo, atanasyan
Reviewed By: atanasyan
Subscribers: sdardis, arichardson, hiraditya, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60936
llvm-svn: 359071
* Add support for uniquing strings in the remark streamer and emitting the string table in the remarks section.
* Add parsing support for the string table in the RemarkParser.
From this remark:
```
--- !Missed
Pass: inline
Name: NoDefinition
DebugLoc: { File: 'test-suite/SingleSource/UnitTests/2002-04-17-PrintfChar.c',
Line: 7, Column: 3 }
Function: printArgsNoRet
Args:
- Callee: printf
- String: ' will not be inlined into '
- Caller: printArgsNoRet
DebugLoc: { File: 'test-suite/SingleSource/UnitTests/2002-04-17-PrintfChar.c',
Line: 6, Column: 0 }
- String: ' because its definition is unavailable'
...
```
to:
```
--- !Missed
Pass: 0
Name: 1
DebugLoc: { File: 3, Line: 7, Column: 3 }
Function: 2
Args:
- Callee: 4
- String: 5
- Caller: 2
DebugLoc: { File: 3, Line: 6, Column: 0 }
- String: 6
...
```
And the string table in the .remarks/__remarks section containing:
```
inline\0NoDefinition\0printArgsNoRet\0
test-suite/SingleSource/UnitTests/2002-04-17-PrintfChar.c\0printf\0
will not be inlined into \0 because its definition is unavailable\0
```
This is mostly supposed to be used for testing purposes, but it gives us
a 2x reduction in the remark size, and is an incremental change for the
updates to the remarks file format.
Differential Revision: https://reviews.llvm.org/D60227
llvm-svn: 359050
Summary:
If two arguments are both readonly, then they have no memory dependency
that would violate noalias, even if they do actually overlap.
Reviewers: hfinkel, efriedma
Reviewed By: efriedma
Subscribers: efriedma, hiraditya, llvm-commits, tstellar
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60239
llvm-svn: 359047
Add selection support for G_INTRINSIC_ROUND, add a selection test, and add
check lines to arm64-vfloatintrinsics.ll and f16-instructions.ll.
llvm-svn: 359046
Add G_INTRINSIC_ROUND to isPreISelGenericFloatingPointOpcode to ensure that its
input and output are assigned the correct register bank.
Add a regbankselect test to verify that we get what we expect here.
llvm-svn: 359044
Summary:
The CMake documentation says that the `DEPENDS` field of
add_custom_target is for files and output of custom commands. Adding a
dependency on a target should be done with `add_dependency`.
Differential Revision: https://reviews.llvm.org/D60879
llvm-svn: 359042
The simple case of:
```
int *callee();
void *caller(void *a) {
if (a == NULL)
return callee();
return a;
}
```
would generate a regular call instead of a tail call because we don't
look through the bitcast of the call to `callee` when duplicating the
return blocks.
Differential Revision: https://reviews.llvm.org/D60837
llvm-svn: 359041
In preparation of https://reviews.llvm.org/D60837, add this test where
we don't perform a tail call because we don't look through a bitcast.
llvm-svn: 359040
Summary:
Always convert switches to br_tables unless there is only one case,
which is equivalent to a simple branch. This reduces code size for wasm,
and we defer possible jump table optimizations to the VM.
Addresses PR41502.
Reviewers: kripken, sunfish
Subscribers: dschuff, sbc100, jgravelle-google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60966
llvm-svn: 359038
Summary:
This way we can change the order of tests or delete some of them without
affecting tests for other functions.
Reviewers: tlively
Subscribers: sunfish, dschuff, sbc100, jgravelle-google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60929
llvm-svn: 359036
Summary:
Enabling MemorySSA in the old pass manager leads to MemorySSA being run
twice due to the fact that LCSSA and LoopSimplify do not preserve
MemorySSA. This is the first step to address that: target LCSSA.
LCSSA does not make any changes that invalidate MemorySSA, so it
preserves it by design. It must preserve AA as well, for this to hold.
After this patch, MemorySSA is still run twice in the old pass manager.
Step two follows: target LoopSimplify.
Subscribers: mehdi_amini, jlebar, Prazek, llvm-commits, george.burgess.iv, chandlerc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60832
llvm-svn: 359032
Apparently FileCheck wasn't actually matching the fallback check lines in
arm64-vfloatintrinsics.ll properly. So, there were selection fallbacks for
G_INTRINSIC_TRUNC there.
Actually hook it up into AArch64InstructionSelector.cpp and write a proper
selection test.
I guess I'll figure out the FileCheck magic to make the fallback checks work
properly in arm64-vfloatintrinsics.ll.
llvm-svn: 359030
DominatorTree::dominate.
ARC contract pass has an optimization that replaces the uses of the
argument of an ObjC runtime function call with the call result.
For example:
; Before optimization
%1 = tail call i8* @foo1()
%2 = tail call i8* @llvm.objc.retainAutoreleasedReturnValue(i8* %1)
store i8* %1, i8** @g0, align 8
; After optimization
%1 = tail call i8* @foo1()
%2 = tail call i8* @llvm.objc.retainAutoreleasedReturnValue(i8* %1)
store i8* %2, i8** @g0, align 8 // %1 is replaced with %2
Before replacing the argument use, DominatorTree::dominate is called to
determine whether the user instruction is dominated by the ObjC runtime
function call instruction. The call to DominatorTree::dominate can be
expensive if the two instructions belong to the same basic block and the
size of the basic block is large. This patch checks the basic block size
and just bails out if the size exceeds the limit set by command line
option "arc-contract-max-bb-size".
rdar://problem/49477063
Differential Revision: https://reviews.llvm.org/D60900
llvm-svn: 359027
Originally committed in r358931
Reverted in r358997
Seems this change made Apple accelerator tables miss names (because
names started respecting the CU NameTableKind GNU & assuming that
shouldn't produce accelerated names too), which is never correct (apple
accelerator tables don't have separators or CU lists - if present, they
must describe all names in all CUs).
Original Description:
Currently to opt in to debug_names in DWARFv5, the IR must contain
'nameTableKind: Default' which also enables debug_pubnames.
Instead, only allow one of {debug_names, apple_names, debug_pubnames,
debug_gnu_pubnames}.
nameTableKind: Default gives debug_names in DWARFv5 and greater,
debug_pubnames in v4 and earlier - and apple_names when tuning for lldb
on MachO.
nameTableKind: GNU always gives gnu_pubnames
llvm-svn: 359026
Summary:
The opt level was not being passed down to the ThinLTO backend when
invoked via clang (for distributed ThinLTO).
This exposed an issue where the new PM was asserting if the Thin or
regular LTO backend pipelines were invoked with -O0 (not a new issue,
could be provoked by invoking in-process *LTO backends via linker using
new PM and -O0). Fix this similar to the old PM where -O0 only does the
necessary lowering of type metadata (WPD and LowerTypeTest passes) and
then quits, rather than asserting.
Reviewers: xur
Subscribers: mehdi_amini, inglorion, eraman, hiraditya, steven_wu, dexonsmith, cfe-commits, llvm-commits, pcc
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D61022
llvm-svn: 359025
Before, there was an IsData parameter. Now, there are two different
functions for data nodes and ID nodes. No behavior change, needed for a
follow-up change to make two data nodes (but not two ID nodes) with the
same ID an error.
For consistency, rename another addChild() overload to addNameChild().
llvm-svn: 359024
Add it to isPreISelGenericFloatingPointOpcode, and add a regbankselect test.
Update arm64-vfloatintrinsics.ll now that we can select it.
llvm-svn: 359022
Same patch as G_FCEIL etc.
Add the missing switch case in widenScalar, add G_INTRINSIC_TRUNC to the correct
rule in AArch64LegalizerInfo.cpp, and add a test.
llvm-svn: 359021
Add urem support to ConstantRange, so we can handle in in LVI. This
is an approximate implementation that tries to capture the most useful
conditions: If the LHS is always strictly smaller than the RHS, then
the urem is a no-op and the result is the same as the LHS range.
Otherwise the lower bound is zero and the upper bound is
min(LHSMax, RHSMax - 1).
Differential Revision: https://reviews.llvm.org/D60952
llvm-svn: 359019
Same as G_FCEIL, G_FABS, etc. Just move it into that rule.
Add a legalizer test for G_FMA, which we didn't have before and update
arm64-vfloatintrinsics.ll.
llvm-svn: 359015
Without this patch, APSInt inherits APInt::isNegative, which merely
checks the sign bit without regard to whether the type is actually
signed. isNonNegative and isStrictlyPositive call isNegative and so
are also affected.
This patch adjusts APSInt to override isNegative, isNonNegative, and
isStrictlyPositive with implementations that consider whether the type
is signed.
A large set of Clang OpenMP tests are affected. Without this patch,
these tests assume that `true` is not a valid argument for clauses
like `collapse`. Indeed, `true` fails APInt::isStrictlyPositive but
not APSInt::isStrictlyPositive. This patch adjusts those tests to
assume `true` should be accepted.
This patch also adds tests revealing various other similar fixes due
to APSInt::isNegative calls in Clang's ExprConstant.cpp and
SemaExpr.cpp: `++` and `--` overflow in `constexpr`, evaluated object
size based on `alloc_size`, `<<` and `>>` shift count validation, and
OpenMP array section validation.
Reviewed By: lebedev.ri, ABataev, hfinkel
Differential Revision: https://reviews.llvm.org/D59712
llvm-svn: 359012
Lang Hames