These MachO file directives are used by linkers and other tools to provide
compatibility information, much like the existing .ios_version_min and
.macosx_version_min.
llvm-svn: 251569
The existing behavior was correct on Darwin, which is probably the
platform it was written for.
Before this change, we would rewrite "align 8" to ".align 3" and then
fail to make it through the integrated assembler because 3 is not a
power of 2.
Differential Revision: http://reviews.llvm.org/D14120
llvm-svn: 251418
GNU as and Darwin give the various binary operators different
precedence. LLVM's MC supported the Darwin semantics but not the GNU
semantics.
This fixes PR25311.
llvm-svn: 251271
Crashing is bad, m'kay? Fixing a 4 year old bug of my own creation.
Adding the testcase now which I should have added then which would have
long since caught this.
The problem is that printMessage() will display the diagnostic but not
set HadError to true, resulting in the assembler continuing on its way
and trying to create relocations for things that may not allow them or
otherwise get itself into trouble. Using the Error() helper function
here rather than calling printMessage() directly resolves this.
rdar://23133240
llvm-svn: 250557
Recommit r250342: move coal-sections-powerpc.s to subdirectory for powerpc.
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250370
Recommit r250342: add -arch=ppc32 to the RUN lines of powerpc tests.
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250349
Some background on why we don't have to use *coal* sections anymore:
Long ago when C++ was new and "weak" had not been standardized, an attempt was
made in cctools to support C++ inlines that can be coalesced by putting them
into their own section (TEXT/textcoal_nt instead of TEXT/text).
The current macho linker supports the weak-def bit on any symbol to allow it to
be coalesced, but the compiler still puts weak-def functions/data into alternate
section names, which the linker must map back to the base section name.
This patch makes changes that are necessary to prevent the compiler from using
the "coal" sections and have it use the non-coal sections instead when the
target architecture is not powerpc:
TEXT/textcoal_nt instead use TEXT/text
TEXT/const_coal instead use TEXT/const
DATA/datacoal_nt instead use DATA/data
If the target is powerpc, we continue to use the *coal* sections since anyone
targeting powerpc is probably using an old linker that doesn't have support for
the weak-def bits.
Also, have the assembler issue a warning if it encounters a *coal* section in
the assembly file and inform the users to use the non-coal sections instead.
rdar://problem/14265330
Differential Revision: http://reviews.llvm.org/D13188
llvm-svn: 250342
.align directive refuses alignment 0 -- a comment in the code hints this is
done for GNU as compatibility, but it seems GNU as accepts .align 0
(and silently rounds up alignment to 1).
Differential Revision: http://reviews.llvm.org/D12682
llvm-svn: 247048
Avoid marking some MCSymbols as used in MC/AsmParser.cpp when no uses
exist. This fixes a bug in parseAssignmentExpression() which
inadvertently sets IsUsed, thereby triggering:
"invalid re-assignment of non-absolute variable"
on otherwise valid code. No other functionality change intended.
The original version of this patch touched many calls to MCSymbol
accessors. On rafael's advice, I have stripped this patch down a bit.
As a follow-up, I intend to find the call sites which intentionally set
IsUsed and force them to do so explicitly.
Differential Revision: http://reviews.llvm.org/D12347
llvm-svn: 246457
This commit adds a virtual `peekTokens()` function to `MCAsmLexer`
which can peek forward an arbitrary number of tokens.
It also makes the `peekTok()` method call `peekTokens()` method, but
only requesting one token.
The idea is to better support targets which more more ambiguous
assembly syntaxes.
Patch by Dylan McKay!
llvm-svn: 245221
This reverts commit r245047.
It was failing on the darwin bots. The problem was that when running
./bin/llc -march=msp430
llc gets to
if (TheTriple.getTriple().empty())
TheTriple.setTriple(sys::getDefaultTargetTriple());
Which means that we go with an arch of msp430 but a triple of
x86_64-apple-darwin14.4.0 which fails badly.
That code has to be updated to select a triple based on the value of
march, but that is not a trivial fix.
llvm-svn: 245062
Other than some places that were handling unknown as ELF, this should
have no change. The test updates are because we were detecting
arm-coff or x86_64-win64-coff as ELF targets before.
It is not clear if the enum should live on the Triple. At least now it lives
in a single location and should be easier to move somewhere else.
llvm-svn: 245047
The AArch32 assembler parses the '@' as a comment symbol, so the error message shouldn't suggest
that '@<type>' is a valid replacement when assembling for AArch32 target.
Differential Revision: http://reviews.llvm.org/D10651
llvm-svn: 241149
represented by uint64_t, this patch replaces these
usages with the FeatureBitset (std::bitset) type.
Differential Revision: http://reviews.llvm.org/D10542
llvm-svn: 241058
r224810 fixed the handling of macro debug locations in AsmParser. This patch
fixes the logic to actually do what was intended: it uses the first macro of
the macro stack instead of the last one. The updated testcase shows that the
current scheme doesn't work when macro instanciations are nested and multiple
files are used.
Reviewers: compnerd
Differential Revision: http://reviews.llvm.org/D10463
llvm-svn: 240705
Summary:
In an expression such as "(((a+b)+c)+d)", parseParenExpression() would only parse the "a+b)+c", which would result in an error later on in the parser.
This means that we can only parse one level of inner parentheses.
In order to fix this, I added a new function called parseParenExprOfDepth(), which parses a specified number of trailing parenthesis expressions
(except for the outermost parenthesis), and changed MipsAsmParser to use it in parseMemOffset instead of parseParenExpression().
Reviewers: dsanders, rafael
Reviewed By: dsanders, rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9742
llvm-svn: 240625
According to the documentation, .thumb_set is 'the equivalent of a .set directive'.
We didn't have equivalent behaviour in terms of all the errors we could throw, for
example, when a symbol is redefined.
This change refactors parseAssignment so that it can be used by .set and .thumb_set
and implements tests for .thumb_set for all the errors thrown by that method.
Reviewed by Rafael Espíndola.
llvm-svn: 240318
The ADDITIONAL_HEADER_DIRS command can be used to tell UIs that a given library
owns certain headers. The path for MCParser was missing MC/ in it.
llvm-svn: 240175
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
This create a MCSymbolELF class and moves SymbolSize since only ELF
needs a size expression.
This reduces the size of MCSymbol from 56 to 48 bytes.
llvm-svn: 238801
.safeseh adds an entry to the .sxdata section to register all the
appropriate functions which may handle an exception. This entry is not
a relocation to the symbol but instead the symbol table index of the
function.
llvm-svn: 238641
If the type isn't trivially moveable emplace can skip a potentially
expensive move. It also saves a couple of characters.
Call sites were found with the ASTMatcher + some semi-automated cleanup.
memberCallExpr(
argumentCountIs(1), callee(methodDecl(hasName("push_back"))),
on(hasType(recordDecl(has(namedDecl(hasName("emplace_back")))))),
hasArgument(0, bindTemporaryExpr(
hasType(recordDecl(hasNonTrivialDestructor())),
has(constructExpr()))),
unless(isInTemplateInstantiation()))
No functional change intended.
llvm-svn: 238602
Both MCStreamer and MCObjectStreamer were maintaining a current section
variable and they were slightly out of sync. I don't think this was observable,
but was inefficient and error prone.
Changing this requires a few cascading changes:
* SwitchSection has to call ChangeSection earlier for ChangeSection to see
the old section.
* With that change, ChangeSection cannot call EmitLabel, since during
ChangeSection we are still in the old section.
* When the object streamer requires a begin label, just reused the existing
generic support for begin labels instead of calling EmitLabel directly.
llvm-svn: 238357
This starts merging MCSection and MCSectionData.
There are a few issues with the current split between MCSection and
MCSectionData.
* It optimizes the the not as important case. We want the production
of .o files to be really fast, but the split puts the information used
for .o emission in a separate data structure.
* The ELF/COFF/MachO hierarchy is not represented in MCSectionData,
leading to some ad-hoc ways to represent the various flags.
* It makes it harder to remember where each item is.
The attached patch starts merging the two by moving the alignment from
MCSectionData to MCSection.
Most of the patch is actually just dropping 'const', since
MCSectionData is mutable, but MCSection was not.
llvm-svn: 237936
Defaulting to AShr without consulting the target MCAsmInfo isn't OK.
Add a flag to fix that. Keep it off for now: target migrations will
follow in separate commits.
llvm-svn: 235951
Summary:
When used, it is substituted with the number of .macro instantiations we've done up to that point in time.
So if this is the 1st time we've instantiated a .macro (any .macro, regardless of name), \@ will instantiate to 0, if it's the 2nd .macro instantiation, it will instantiate to 1 etc.
It can only be used inside a .macro definition, an .irp definition or an .irpc definition (those last 2 uses are undocumented).
Reviewers: echristo, rafael
Reviewed By: rafael
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D9197
llvm-svn: 235862
Summary:
This directive is exactly the same as .asciz, except it's only used by MIPS.
It is used to store null terminated strings in object files.
Reviewers: rafael, dsanders, echristo
Reviewed By: dsanders, echristo
Subscribers: echristo, llvm-commits
Differential Revision: http://reviews.llvm.org/D7530
llvm-svn: 235382
The patch is generated using clang-tidy misc-use-override check.
This command was used:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py \
-checks='-*,misc-use-override' -header-filter='llvm|clang' \
-j=32 -fix -format
http://reviews.llvm.org/D8925
llvm-svn: 234679
This allows the compiler/assembly programmer to switch back to a
section. This in turn fixes the bootstrap failure on powerpc (tested
on gcc110) without changing the ppc codegen at all.
I will try to cleanup the various getELFSection overloads in a followup patch.
Just using a default argument now would lead to ambiguities.
llvm-svn: 234099
Add support for having multiple sections with the same name and comdat.
Using this in combination with -ffunction-sections allows LLVM to output a .o
file with mulitple sections named .text. This saves space by avoiding long
unique names of the form .text.<C++ mangled name>.
llvm-svn: 229541
regressions for LLDB on Linux. Rafael indicated on lldb-dev that we
should just go ahead and revert these but that he wasn't at a computer.
The patches backed out are as follows:
r228980: Add support for having multiple sections with the name and ...
r228889: Invert the section relocation map.
r228888: Use the existing SymbolTableIndex intsead of doing a lookup.
r228886: Create the Section -> Rel Section map when it is first needed.
These patches look pretty nice to me, so hoping its not too hard to get
them re-instated. =D
llvm-svn: 229080
Using this in combination with -ffunction-sections allows LLVM to output a .o
file with mulitple sections named .text. This saves space by avoiding long
unique names of the form .text.<C++ mangled name>.
llvm-svn: 228980
This allows IDEs to recognize the entire set of header files for
each of the core LLVM projects.
Differential Revision: http://reviews.llvm.org/D7526
Reviewed By: Chris Bieneman
llvm-svn: 228798
Any code creating an MCSectionELF knows ELF and already provides the flags.
SectionKind is an abstraction used by common code that uses a plain
MCSection.
Use the flags to compute the SectionKind. This removes a lot of
guessing and boilerplate from the MCSectionELF construction.
llvm-svn: 227476
This patch was generated by a clang tidy checker that is being open sourced.
The documentation of that checker is the following:
/// The emptiness of a container should be checked using the empty method
/// instead of the size method. It is not guaranteed that size is a
/// constant-time function, and it is generally more efficient and also shows
/// clearer intent to use empty. Furthermore some containers may implement the
/// empty method but not implement the size method. Using empty whenever
/// possible makes it easier to switch to another container in the future.
Patch by Gábor Horváth!
llvm-svn: 226161
Correct the line information generation for preprocessed assembly. Although we
tracked the source information for the macro instantiation, we failed to account
for the fact that we were instantiating a macro, which is populated into a new
buffer and that the line information would be relative to the definition rather
than the actual instantiation location. This could cause the line number
associated with the statement to be very high due to wrapping of the difference
calculated for the preprocessor line information emitted into the stream.
Properly calculate the line for the macro instantiation, referencing the line
where the macro is actually used as GCC/gas do.
The test case uses x86, though the same problem exists on any other target using
the LLVM IAS.
llvm-svn: 224810
Clang's static analyzer found several potential cases of undefined
behavior, use of un-initialized values, and potentially null pointer
dereferences in tablegen, Support, MC, and ADT. This cleans them up
with specific assertions on the assumptions of the code.
llvm-svn: 224154
Use the MCAsmInfo instead of the DataLayout, and allow
specifying a custom prefix for labels specifically. HSAIL
requires that labels begin with @, but global symbols with &.
llvm-svn: 223323
This adds const to a few methods that already return const references or
creates a const version when they reterun non-const references.
llvm-svn: 221666
When LLVM emits DWARF call frame information, it currently creates a local,
section-relative symbol in the code section, which is pointed to by a
relocation on the .eh_frame section. However, for C++ we emit some functions in
section groups, and the SysV ABI has some rules to make it easier to remove
these sections
(http://www.sco.com/developers/gabi/latest/ch4.sheader.html#section_group_rules):
A symbol table entry with STB_LOCAL binding that is defined relative to one
of a group's sections, and that is contained in a symbol table section that is
not part of the group, must be discarded if the group members are discarded.
References to this symbol table entry from outside the group are not allowed.
This means that we need to use the function symbol for the relocation, not a
temporary symbol.
There was a comment in the code claiming that the local symbol was used to
avoid creating a relocation, but a relocation must be created anyway as the
code and CFI are in different sections.
llvm-svn: 221150
Summary:
The register names t4-t7 are not available in the N32 and N64 ABIs.
This patch prints a warning, when those names are used in N32/64,
along with a fix-it with the correct register names.
Patch by Vasileios Kalintiris
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5272
llvm-svn: 218989
We currently emit an error when trying to assemble a file with more
than one section using DWARF2 debug info. This should be a warning
instead, as the resulting file will still be usable, but with a
degraded debug illusion.
llvm-svn: 218241
The implementation of the callback in clang's Sema will return an
internal name for labels.
Test Plan: Will be tested in clang.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4587
llvm-svn: 218229
Take a StringRef instead of a "const char *".
Take a "std::error_code &" instead of a "std::string &" for error.
A create static method would be even better, but this patch is already a bit too
big.
llvm-svn: 216393
It makes no sense and can hide bugs. In particular, it lead
to left shift by 64 bits, which is an undefined behavior,
properly reported by UBSan.
llvm-svn: 216134
ARM in particular is getting dangerously close to exceeding 32 bits worth of
possible subtarget features. When this happens, various parts of MC start to
fail inexplicably as masks get truncated to "unsigned".
Mostly just refactoring at present, and there's probably no way to test.
llvm-svn: 215887
As X86MCAsmInfoDarwin uses '##' as CommentString although a single '#' starts a
comment a workaround for this special case is added.
Fixes divisions in constant expressions for the AArch64 assembler and other
targets which use '//' as CommentString.
Patch by Janne Grunau!
llvm-svn: 215615
Duplicate the vararg tests for linux and add a tests which mixed
vararg arguments with darwin positional parameters.
Patch by: Janne Grunau <j@jannau.net>
llvm-svn: 214799
Use 0 for the invalid buffer instead of -1/~0 and switch to unsigned
representation to enable more idiomatic usage.
Also introduce a trivial SourceMgr::getMainFileID() instead of hard-coding 0/1
to identify the main file.
llvm-svn: 212398
Rename the routines to reflect the reality that they are more related to call
frame information than to Win64 EH. Although EH is implemented in an intertwined
manner by augmenting with an exception handler and an associated parameter, the
majority of these routines emit information required to unwind the frames. This
also helps identify that these routines are generic for most windows platforms
(they apply equally to nearly all architectures except x86) although the
encoding of the information is architecture dependent.
Unwinding data is emitted via EmitWinCFI* and exception handling information via
EmitWinEH*.
llvm-svn: 211994
COFF sections in MC were represented by a tuple of section-name and
COMDAT-name. This is not sufficient to represent a .text section
associated with another .text section; we need a way to distinguish
between the key section and the one marked associative.
llvm-svn: 211913
string_ostream is a safe and efficient string builder that combines opaque
stack storage with a built-in ostream interface.
small_string_ostream<bytes> additionally permits an explicit stack storage size
other than the default 128 bytes to be provided. Beyond that, storage is
transferred to the heap.
This convenient class can be used in most places an
std::string+raw_string_ostream pair or SmallString<>+raw_svector_ostream pair
would previously have been used, in order to guarantee consistent access
without byte truncation.
The patch also converts much of LLVM to use the new facility. These changes
include several probable bug fixes for truncated output, a programming error
that's no longer possible with the new interface.
llvm-svn: 211749
Utilize range based for-loops to simplify some code.
Use insert() instead of a loop for simplicity/efficiency.
No functionality change.
llvm-svn: 211486
Correct the section flags for code built for Windows on ARM with
`-ffunction-sections`. Windows on ARM uses solely Thumb-2 instructions, and
indicates that the function is thumb by placing it in a text section that has
IMAGE_SCN_MEM_16BIT flag set.
When we encounter a .section directive, a new section is constructed. This may
be a text segment. In order to identify that we need the additional flag,
expose the target triple through the ObjectFileInfo as this information is lost
otherwise.
Since any modern ARM targeting environment on Windows would be Thumb-2 (Windows
ARM NT or Windows Embedded Compact), introducing a new flag to indicate the
section attribute seems to be a bit overkill. Simply depend on the target
triple. Since there is one location that this information is currently needed,
creating a target specific assembly parser and delegating the parsing of section
switches also feels a bit heavy handed. If it turns out that this information
ends up changing additional behaviour, then it may be worth considering that
alternative.
llvm-svn: 211481
Currently, when using llvm as an assembler, DWARF debug information is only
generated for the .text section. This patch modifies this so that DWARF info
is emitted for all executable sections.
llvm-svn: 211273
We would get confused by '@' characters in symbol names, we would
mistake the text following them for the variant kind.
When an identifier a string, the variant kind will never show up inside
of it. Instead, check to see if there is a variant following the
string.
This fixes PR19965.
llvm-svn: 211249
I saw at least a memory leak or two from inspection (on probably
untested error paths) and r206991, which was the original inspiration
for this change.
I ran this idea by Jim Grosbach a few weeks ago & he was OK with it.
Since it's a basically mechanical patch that seemed sufficient - usual
post-commit review, revert, etc, as needed.
llvm-svn: 210427
GAS documents the .type directive as having an optional comma following the key
symbol name when using the STT_<TYPE_IN_UPPER_CASE> form. However, it treats
the comma as optional in all cases. This makes the IAS support both forms of
inputs. Furthermore, the prefixed forms take either the upper case name or the
lower case alias.
The tests are split into two separate sets as the hash character serves as a
comment character on x86, which is tested in the second set by using arm-elf
which uses the at symbol as a comment character.
llvm-svn: 210407
* Section association cannot use just the section name as many
sections can have the same name. With this patch, the comdat symbol in
an assoc section is interpreted to mean a symbol in the associated
section and the mapping is discovered from it.
* Comdat symbols were not being set correctly. Instead we were getting
whatever was output first for that section.
A consequence is that associative sections now must use .section to
set the association. Using .linkonce would not work since it is not
possible to change a sections comdat symbol (it is used to decide if
we should create a new section or reuse an existing one).
This includes r210298, which was reverted because it was asserting
on an associated section having the same comdat as the associated
section.
llvm-svn: 210367
Permit active macro expansions when terminating the assembler if there were
errors during the expansion. This would only trigger on invalid input when
built with assertions.
llvm-svn: 209309
diagnostic that includes location information.
Currently if one has this assembly:
.quad (0x1234 + (4 * SOME_VALUE))
where SOME_VALUE is undefined ones gets the less than
useful error message with no location information:
% clang -c x.s
clang -cc1as: fatal error: error in backend: expected relocatable expression
With this fix one now gets a more useful error message
with location information:
% clang -c x.s
x.s:5:8: error: expected relocatable expression
.quad (0x1234 + (4 * SOME_VALUE))
^
To do this I plumbed the SMLoc through the MCObjectStreamer
EmitValue() and EmitValueImpl() interfaces so it could be used
when creating the MCFixup.
rdar://12391022
llvm-svn: 206906
I don't think this is reachable by any frontend (why would you transform
asm to asm+debug info?) but it helps tidy up some of this code, avoid
the weird special case of "emit the first CU, store the label, then emit
the rest" in MCDwarfLineTable::Emit by instead having the
DWARF-for-assembly case use the same codepath as DwarfDebug.cpp, by
registering the label of the debug_line section, thus causing it to be
emitted. (with a special case in asm output to just emit the label since
asm output uses the .loc directives, etc, rather than the debug_loc
directly)
llvm-svn: 205286
Allow object files to be tagged with a version-min load command for iOS
or MacOSX.
Teach macho-dump to understand the version-min load commands for
testcases.
rdar://11337778
llvm-svn: 204190
It is unclear how it would be possible to get M to be NULL in normal scenarios.
Change this to an assert rather than a runtime check as per dblakie's
suggestion.
llvm-svn: 204060
The previous deduping strategy was woefully inadequate - it only
considered the most recent file used and avoided emitting a duplicate in
that case - never considering the a/b/a scenario.
It was also lacking when it came to directory paths as the previous
filename would never match the current if the filename had been split
into file and directory components.
This change builds caching functionality into the line table at the
lowest level in an optional form (a file number of 0 indicates that one
should be chosen and returned) and will eventually be reused by the
normal source level debugging DWARF emission.
llvm-svn: 204027
There aren't /that/ many files, and we are already using various maps
and other standard containers that don't use MCContext's allocator to
store these values, so this doesn't seem to be critical and simplifies
the design (I'll be moving construction out of MCContext shortly so it'd
be annoying to have to pass the allocator around to allocate these
things... and we'll have non-MCContext users (debug_line.dwo) shortly)
llvm-svn: 203831
This changes the implementation of local directional labels to use a dedicated
map. With that it can then just use CreateTempSymbol, which is what the rest
of MC uses.
CreateTempSymbol doesn't do a great job at making sure the names are unique
(or being efficient when the names are not needed), but that should probably
be fixed in a followup patch.
This fixes pr18928.
llvm-svn: 203826
Summary:
llvm/MC/MCSectionMachO.h and llvm/Support/MachO.h both had the same
definitions for the section flags. Instead, grab the definitions out of
support.
No functionality change.
Reviewers: grosbach, Bigcheese, rafael
Reviewed By: rafael
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2998
llvm-svn: 203211
After this I will set the default back to F_None. The advantage is that
before this patch forgetting to set F_Binary would corrupt a file on windows.
Forgetting to set F_Text produces one that cannot be read in notepad, which
is a better failure mode :-)
llvm-svn: 202052
The .error directive is similar to .err in that it will halt assembly if it is
evaluated for assembly. However, it permits a user supplied message to be
rendered.
llvm-svn: 201999
The .ifeqs directive assembles the following code if the quoted string
parameters are equal. The strings must be quoted using double quotes.
llvm-svn: 201998
The .ifne directive assembles the following section of code if the argument
expression is non-zero. Effectively, it is equivalent to if.
llvm-svn: 201986
If the strings are not quoted, the first string stops at the first comma, and
the second string stops at the end of the line. Strings which contain
whitespace should be quoted. Unquoted space is to be discarded.
llvm-svn: 201985
The .err directive produces an error whenever it is assembled. This can be
useful for preventing assembly when an unexpected condition occurs.
llvm-svn: 201984
This enhances the macro parser to parse and handle parameter qualifications,
which is needed to support required formal parameters in macro definitions. A
required parameter may not be defaulted (though providing a default value is
accepted with a warning). This improves GAS compatibility.
Partially addresses PR9248.
llvm-svn: 201630
Rather than using std::pair, create a structure to represent the type. This is
a preliminary refactoring to enable required parameter handling. Additional
state is needed to indicate required parameters. This has a minor side effect
of improving readability by providing more accurate names compared to first and
second.
llvm-svn: 201629
This is implemented by handling assignments to the '.' pseudo symbol
as ".org" directives.
Differential Revision: http://llvm-reviews.chandlerc.com/D2625
llvm-svn: 201530
Until this point only macro definition with named parameters were parsed but the
names were ignored. This adds support for using that information for named
parameter instantiation.
In order to support the full semantics of the keyword arguments, the arguments
are no longer lazily initialised since the keyword arguments can be specified
out of order and partially if they are defaulted. Prepopulate the arguments
with the default value for any defaulted parameters, and then parse the
specified arguments.
This simplies some of the handling of the arguments in the inner loop since
empty arguments simply increment the parameter index and move on.
Note that keyword and positional arguments cannot be mixed.
llvm-svn: 201499
The Linux kernel defines empty macros for compatibility with ARM UAL syntax.
The comma after the name is optional, and if present can be safely lexed. This
improves compatibility with the GNU assembler.
llvm-svn: 201474
Some of the more complex directive and macro handling for GAS compatibility
requires lookahead. Add a single token lookahead in the MCAsmLexer.
llvm-svn: 201058
This patch fixes the ldr-pseudo implementation to work when used in
inline assembly. The fix is to move arm assembler constant pools
from the ARMAsmParser class to the ARMTargetStreamer class.
Previously we kept the assembler generated constant pools in the
ARMAsmParser object. This does not work for inline assembly because
a new parser object is created for each blob of inline assembly.
This patch moves the constant pools to the ARMTargetStreamer class
so that the constant pool will remain alive for the entire code
generation process.
An ARMTargetStreamer class is now required for the arm backend.
There was no existing implementation for MachO, only Asm and ELF.
Instead of creating an empty MachO subclass, we decided to make the
ARMTargetStreamer a non-abstract class and provide default
(llvm_unreachable) implementations for the non constant-pool related
methods.
Differential Revision: http://llvm-reviews.chandlerc.com/D2638
llvm-svn: 200777
This is a minimal implementation which accepts only constants rather than
full expressions, but that should be perfectly sufficient for all known
users for now.
Patch from PaX Team <pageexec@freemail.hu>
llvm-svn: 200614
This will be needed for .octa support, but we don't want to just use the
existing AsmLexer::Integer for it and then have to litter all its users
with explicit checks for the size, and make them use the new get APIntVal()
method.
So let the lexer produce an AsmLexer::Integer as before for numbers which
are small enough — which appears to cover what was previously a nasty
special case handling of numbers which don't fit in int64_t but *do* fit
in uint64_t.
Where the number is too large even for that, produce an AsmLexer::BigNum
instead. We do nothing with these except complain about them for now,
but that will be changed shortly...
Based on a patch from PaX Team <pageexec@freemail.hu>
llvm-svn: 200613
Per the GAS documentation, .fill should permit pattern widths that
aren't a power of two. While I was in the neighborhood, I added some
sanity checking. This change was motivated by a use of this construct
in the Linux Kernel.
llvm-svn: 200606
The linux kernel makes uses of a GAS `feature' which substitutes nothing
for macro arguments which aren't specified.
Proper support for these kind of macro arguments necessitated a cleanup of
differences between `GAS' and `Darwin' dialect macro processing.
Differential Revision: http://llvm-reviews.chandlerc.com/D2634
llvm-svn: 200409
This commit allows LLVM MC to process .cfi_startproc directives when
they are followed by an additional `simple' identifier. This signals to
elide the emission of target specific CFI instructions that would
normally occur initially.
This fixes PR16587.
Differential Revision: http://llvm-reviews.chandlerc.com/D2624
llvm-svn: 200227
An emitted diagnostic for an invalid relocation variant would place the caret on
the token following the relocation variant indicator or at the end of the line
if there was no following token. This change corrects the placement of the
caret to point to the token.
llvm-svn: 200159
ARM assembly syntax uses @ for a comment, execpt for the second
parameter of the .symver directive which requires @ as part of the
symbol name. This commit fixes the parsing of this directive by
adding a special case for ARM for this one argumnet.
To make the change we had to move the AllowAtInIdentifier variable
to the MCAsmLexer interface (from AsmLexer) and expose a setter for
the value. The ELFAsmParser then toggles this value when parsing
the second argument to the .symver directive for a target that
uses @ as a comment symbol
llvm-svn: 199339
subsequent changes are easier to review. About to fix some layering
issues, and wanted to separate out the necessary churn.
Also comment and sink the include of "Windows.h" in three .inc files to
match the usage in Memory.inc.
llvm-svn: 198685
Introduce a new virtual method Note into the AsmParser. This completements the
existing Warning and Error methods. Use the new method to clean up the output
of the unwind routines in the ARM AsmParser.
llvm-svn: 198661
The GNU assembler supports .rep as an alias for .rept. This simply creates the
alias for it and introduces a test for both .rept and .rep.
llvm-svn: 198097
This callback is invoked when the parse has finished successfuly. It
will be used to write out ARM constant pools to implement the ldr
pseudo.
llvm-svn: 197706
The .end directive indicates the end of the file. No further instructions are
processed after a .end directive is encountered.
One potential (glaringly obvious) optimisation that could be pursued here is to
extend MCAsmParser with a DiscardRemainder method to avoid processing lexemes to
the end of the file. It was unclear at this point if that would be worth
adding, and could easily be added in a follow on change.
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org>
llvm-svn: 197547
This re-lands commit r196876, which was reverted in r196879.
The tests have been fixed to pass on platforms with a stack alignment
larger than 4.
Update to clang side tests will land shortly.
llvm-svn: 196939
For stack frames requiring realignment, three pointers may be needed:
- ebp to address incoming arguments
- esi (could be any callee-saved register) to address locals
- esp to address outgoing arguments
We would use esi unconditionally without verifying that it did not
conflict with inline assembly.
This change doesn't do the verification, it simply emits a fatal error
on functions that use stack realignment, dynamic SP adjustments, and
inline assembly.
Because stack realignment is common on Windows, we also no longer assume
that MS inline assembly clobbers esp. Instead, we analyze the inline
instructions for implicit definitions and check if esp is there. If so,
we require the use of a base pointer and consider it in the condition
above.
Mostly fixes PR16830, but we could try harder to find a non-conflicting
base pointer.
Reviewers: sunfish
Differential Revision: http://llvm-reviews.chandlerc.com/D1317
llvm-svn: 196876
This commit caches the value of the AllowAtInIdentifier variable as
a class variable in AsmLexer. We do this to avoid repeated MAI
queries and string comparisons each time we lex an identifier.
llvm-svn: 196622
The integrated assembler fails to properly lex arm comments when
they are adjacent to an identifier in the input stream. The reason
is that the arm comment symbol '@' is also used as symbol variant in
other assembly languages so when lexing an identifier it allows the
'@' symbol as part of the identifier.
Example:
$ cat comment.s
foo:
add r0, r0@got to parse this as a comment
$ llvm-mc -triple armv7 comment.s
comment.s:4:18: error: unexpected token in argument list
add r0, r0@got to parse this as a comment
^
This should be parsed as correctly as `add r0, r0`.
This commit modifes the assembly lexer to not include the '@' symbol
in identifiers when lexing for targets that use '@' for comments.
llvm-svn: 196607
ARM symbol variants are written with parens instead of @ like this:
.word __GLOBAL_I_a(target1)
This commit adds support for parsing these symbol variants in
expressions. We introduce a new flag to MCAsmInfo that indicates the
parser should use parens to parse the symbol variant. The expression
parser is modified to look for symbol variants using parens instead
of @ when the corresponding MCAsmInfo flag is true.
The MCAsmInfo parens flag is enabled only for ARM on ELF.
By adding this flag to MCAsmInfo, we are able to get rid of
redundant ARM-specific symbol variants and use the generic variants
instead (e.g. VK_GOT instead of VK_ARM_GOT). We use the new
UseParensForSymbolVariant attribute in MCAsmInfo to correctly print
the symbol variants for arm.
To achive this we need to keep a handle to the MCAsmInfo in the
MCSymbolRefExpr class that we can check when printing the symbol
variant.
Updated Tests:
Changed case of symbol variant to match the generic kind.
test/CodeGen/ARM/tls-models.ll
test/CodeGen/ARM/tls1.ll
test/CodeGen/ARM/tls2.ll
test/CodeGen/Thumb2/tls1.ll
test/CodeGen/Thumb2/tls2.ll
PR18080
llvm-svn: 196424
This is the first step to fix pr17918.
It extends the .section directive a bit, inspired by what the ELF one looks
like. The problem with using linkonce is that given
.section foo
.linkonce....
.section foo
.linkonce
we would already have switched sections when getting to .linkonce. The cleanest
solution seems to be to add the comdat information in the .section itself.
llvm-svn: 195148
When assembling, a .thumb_func directive is supposed to be applicable to the
next symbol definition, even if there are intervening directives. We were
racing ahead to try and find it, and this commit should fix the issue.
Patch by Gabor Ballabas
llvm-svn: 193403
This is another (final?) stab at making us able to parse our own asm output
on Windows.
Symbols on Windows often contain @'s and ?'s in their names. Our asm parser
didn't like this. ?'s were not allowed, and @'s were intepreted as trying to
reference PLT/GOT/etc.
We can't just add quotes around the bad names, since e.g. for MinGW, we use gas
to assemble, and it doesn't like quotes in some places (notably in .def
directives).
This commit makes us allow ?'s in symbol names, and @'s in symbol names for MS
assembly.
Differential Revision: http://llvm-reviews.chandlerc.com/D1978
llvm-svn: 193000
This caused the clang-native-mingw32-win7 buildbot to break.
The assembler was complaining about the following lines that were showing up
in the asm for CrashRecoveryContext.cpp:
movl $"__ZL16ExceptionHandlerP19_EXCEPTION_POINTERS@4", 4(%eax)
calll "_AddVectoredExceptionHandler@8"
.def "__ZL16ExceptionHandlerP19_EXCEPTION_POINTERS@4";
"__ZL16ExceptionHandlerP19_EXCEPTION_POINTERS@4":
calll "_RemoveVectoredExceptionHandler@4"
Reverting for now.
llvm-svn: 192940
The reason this got reverted was that the @feat.00 symbol which was emitted
for every TU became quoted, and on cygwin/mingw we use the gas assembler which
couldn't handle the quotes.
This commit fixes the problem by only emitting @feat.00 for win32, where we use
clang -cc1as to assemble. gas would just drop this symbol anyway, so there is no
loss there.
With @feat.00 gone, there shouldn't be quoted symbols showing up on cygwin since
it uses the Itanium ABI, which doesn't put these funny characters in symbols.
> Because of win32 mangling, we produce symbol and section names with
> funny characters in them, most notably @ characters.
>
> MC would choke on trying to parse its own assembly output. This patch addresses
> that by:
>
> - Making @ trigger quoting of symbol names
> - Also quote section names in the same way
> - Just parse section names like other identifiers (to allow for quotes)
> - Don't assume @ signifies a symbol variant if it is in a string.
llvm-svn: 192859
GNU AS didn't like quotes in symbol names.
Error: junk at end of line, first unrecognized character is `"'
.def "@feat.00";
"@feat.00" = 1
Reproduced on Cygwin's 2.23.52.20130309 and mingw32's 2.20.1.20100303.
llvm-svn: 192775
Because of win32 mangling, we produce symbol and section names with
funny characters in them, most notably @ characters.
MC would choke on trying to parse its own assembly output. This patch addresses
that by:
- Making @ trigger quoting of symbol names
- Also quote section names in the same way
- Just parse section names like other identifiers (to allow for quotes)
- Don't assume @ signifies a symbol variant if it is in a string.
Differential Revision: http://llvm-reviews.chandlerc.com/D1945
llvm-svn: 192758
This patch handles LLVM standalone assembler (llvm-mc) ELF flag setting based on input file
directive processing.
Mips assembly requires processing inline directives that directly and
indirectly affect the output ELF header flags. This patch handles one
".abicalls".
To process these directives we are following the model the code generator
uses by storing state in a container as we go through processing and when
we detect the end of input file processing, AsmParser is notified and we
update the ELF header flags through a MipsELFStreamer method with a call from
MCTargetAsmParser::emitEndOfAsmFile(MCStreamer &OutStreamer).
This patch will allow other targets the same functionality.
Jack
llvm-svn: 191982
CFE produces it to indicate artificial locations.
c.f.: DWARF standard, Table 6.2:
line -- An unsigned integer indicating a source line number. Lines are numbered beginning at 1. The compiler may emit the value 0 in cases where an instruction cannot be attributed to any source line.
llvm-svn: 191471
The binutils assembler supports a mode called DOLLAR_DOT which treats
the dollar sign token as a reference to the current program counter if
the dollar sign doesn't precede a constant or identifier.
This commit adds a new MCAsmInfo flag stating whether or not a given
target supports this interpretation of the dollar sign token; by
default, this flag is not enabled.
Further, enable this flag for PPC. The system assembler for AIX and
binutils both support using the dollar sign in this manner.
This fixes PR17353.
llvm-svn: 191368
This makes using array_pod_sort significantly safer. The implementation relies
on function pointer casting but that should be safe as we're dealing with void*
here.
llvm-svn: 191175
Clean up some simple code quality issues. Bring internal naming
conventions up to current standard, fix inconsistent formatting, and
tidy up a couple of odd contructs.
llvm-svn: 191117
Summary:
The '?' flag uses the last section group if the last had a section
group. We treat combining an explicit section group and the '?' as a
hard error.
This fixes PR17198.
Reviewers: rafael, bkramer
Reviewed By: bkramer
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1686
llvm-svn: 190768
with a debug build) with this buggy .indirect_symbol directive usage:
% cat test.s
x: .indirect_symbol _y
The assertion is because it is trying to get the symbol index for the
symbol _y when it is writing out the indirect symbol table. This line of
code in MachObjectWriter::WriteObject() :
Write32(Asm.getSymbolData(*it->Symbol).getIndex());
And while there is a symbol _y it does not have any getSymbolData set which
is only done in MachObjectWriter::BindIndirectSymbols() for pointer sections
or stub sections. I added a check and an error in there to catch this in case
something slips through.
But to get a better error the parser should detect when a .indirect_symbol
directive is used and it is not in a pointer section or stub section. To make
that work I moved the handling of the indirect symbol out of the target
independent AsmParser code into the DarwinAsmParser code that can check
for the proper Mach-O section types.
rdar://14825505
llvm-svn: 189497
It's useful to be able to write down floating-point numbers without having to
worry about what they'll be rounded to (as C99 discovered), this extends that
ability to the MC assembly parsers.
llvm-svn: 188370
Currently, when an invalid attribute is encountered on processing a .s file,
clang will abort due to llvm_unreachable. Invalid user input should not cause
an abnormal termination of the compiler. Change the interface to return a
boolean to indicate the failure as a first step towards improving hanlding of
malformed user input to clang.
Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org>
llvm-svn: 188047
Tim Northover