The hint instructions are enabled by default (if the standard C extension is
enabled). To disable them pass -mattr=-rvc-hints.
Differential Revision: https://reviews.llvm.org/D62592
llvm-svn: 369528
The canonical GNU form of JALR resembles a load/store instruction rather
than placing the immediate offset as a separate argument, so match this
behaviour. Also add parser-only aliases for the three-operand form, and
add other shorter aliases also emitted by GNU tools.
Differential Revision: https://reviews.llvm.org/D55277
Patch by James Clarke.
llvm-svn: 366179
Since PseudoCALL defines AsmString, it can be generated from assembly,
and so code-gen patterns should be defined separately to be consistent
with the style of the RISCV backend. Other pseudo-instructions exist
that have code-gen patterns defined directly, but these instructions are
purely for code-gen and cannot be written in assembly.
Differential Revision: https://reviews.llvm.org/D64012
Patch by James Clarke.
llvm-svn: 366174
On RISC-V, the `cycle` CSR holds a 64-bit count of the number of clock
cycles executed by the core, from an arbitrary point in the past. This
matches the intended semantics of `@llvm.readcyclecounter()`, which we
currently leave to the default lowering (to the constant 0).
With this patch, we will now correctly lower this intrinsic to the
intended semantics, using the user-space instruction `rdcycle`. On
64-bit targets, we can directly lower to this instruction.
On 32-bit targets, we need to do more, as `rdcycle` only returns the low
32-bits of the `cycle` CSR. In this case, we perform a custom lowering,
based on the PowerPC lowering, using `rdcycleh` to obtain the high
32-bits of the `cycle` CSR. This custom lowering inserts a new basic
block which detects overflow in the high 32-bits of the `cycle` CSR
during reading (because multiple instructions are required to read). The
emitted assembly matches the suggested assembly in the RISC-V
specification.
Differential Revision: https://reviews.llvm.org/D64125
llvm-svn: 365201
This patch adds the PseudoCALLReg instruction which allows using an
explicit register operand as the destination for the return address.
GCC can successfully parse this form of the call instruction, which
would be used for calls to functions which do not use ra as the return
address register, such as the __riscv_save libcalls. This patch forms
the first part of an implementation of -msave-restore for RISC-V.
Differential Revision: https://reviews.llvm.org/D62685
llvm-svn: 364403
This patch adds the pseudo instructions la.tls.ie and la.tls.gd, used in
the initial-exec and global-dynamic TLS models respectively when
addressing a global. The pseudo instructions are expanded in the
assembly parser.
llvm-svn: 361499
This patch adds support in the MC layer for parsing and assembling the
4-operand add instruction needed for TLS addressing. This also involves
parsing the %tprel_hi, %tprel_lo and %tprel_add operand modifiers.
Differential Revision: https://reviews.llvm.org/D55341
llvm-svn: 357698
This patch replaces the addition of VK_RISCV_CALL in RISCVMCCodeEmitter by
creating the RISCVMCExpr when tail/call are parsed, or in the codegen case
when the callee symbols are created.
This required adding a new CallSymbol operand to allow only adding
VK_RISCV_CALL to tail/call instructions.
This patch will allow further expansion of parsing and codegen to easily
include PLT symbols which must generate the R_RISCV_CALL_PLT relocation.
Differential Revision: https://reviews.llvm.org/D55560
Patch by Lewis Revill.
llvm-svn: 357396
Adds two patterns to improve the codegen of GPR value comparisons with small
constants. Instead of first loading the constant into another register and then
doing an XOR of those registers, these patterns directly use the constant as an
XORI immediate.
llvm-svn: 356990
Allow load/store instructions with implied zero offset for compatibility with
GNU assembler.
Differential Revision: https://reviews.llvm.org/D57141
Patch by James Clarke.
llvm-svn: 354581
Summary:
Those pseudo-instructions are making load/store instructions able to
load/store from/to a symbol, and its always using PC-relative addressing
to generating a symbol address.
Reviewers: asb, apazos, rogfer01, jrtc27
Differential Revision: https://reviews.llvm.org/D50496
llvm-svn: 354430
This patch also introduces the emitAuipcInstPair helper, which is then used
for both emitLoadAddress and emitLoadLocalAddress.
Differential Revision: https://reviews.llvm.org/D55325
Patch by James Clarke.
llvm-svn: 354111
The previous DAG combiner-based approach had an issue with infinite loops
between the target-dependent and target-independent combiner logic (see
PR40333). Although this was worked around in rL351806, the combiner-based
approach is still potentially brittle and can fail to select the 32-bit shift
variant when profitable to do so, as demonstrated in the pr40333.ll test case.
This patch instead introduces target-specific SelectionDAG nodes for
SHLW/SRLW/SRAW and custom-lowers variable i32 shifts to them. pr40333.ll is a
good example of how this approach can improve codegen.
This adds DAG combine that does SimplifyDemandedBits on the operands (only
lower 32-bits of first operand and lower 5 bits of second operand are read).
This seems better than implementing SimplifyDemandedBitsForTargetNode as there
is no guarantee that would be called (and it's not for e.g. the anyext return
test cases). Also implements ComputeNumSignBitsForTargetNode.
There are codegen changes in atomic-rmw.ll and atomic-cmpxchg.ll but the new
instruction sequences are semantically equivalent.
Differential Revision: https://reviews.llvm.org/D57085
llvm-svn: 352169
Previously we had names like 'Call' or 'Tail'. This potentially clashes with
the naming scheme used elsewhere in RISCVInstrInfo.td. Many other backends
would use names like AArch64call or PPCtail. I prefer the SystemZ approach,
which uses prefixed all-lowercase names. This matches the naming scheme used
for target-independent SelectionDAG nodes.
llvm-svn: 351823
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This restores support for selecting the SLLW/SRLW/SRAW instructions, which was
removed in rL348067 as the previous patterns made some unsafe assumptions.
Also see the related llvm-dev discussion
<http://lists.llvm.org/pipermail/llvm-dev/2018-December/128497.html>
Ultimately I didn't introduce a custom SelectionDAG node, but instead added a
DAG combine that inserts an AssertZext i5 on the shift amount for an i32
variable-length shift and also added an ANY_EXTEND DAG-combine which will
instead produce a SIGN_EXTEND for an i32 variable-length shift, increasing the
opportunity to safely select SLLW/SRLW/SRAW.
There are obviously different ways of addressing this (a number discussed in
the llvm-dev thread), so I'd welcome further feedback and comments.
Note that there are now some cases in
test/CodeGen/RISCV/rv64i-exhaustive-w-insts.ll where sraw/srlw/sllw is
selected even though sra/srl/sll could be used without any extra instructions.
Given both are semantically equivalent, there doesn't seem a good reason to
prefer one vs the other. Given that would require more logic to still select
sra/srl/sll in those cases, I've left it preferring the *w variants.
Differential Revision: https://reviews.llvm.org/D56264
llvm-svn: 350992
As noted by Eli Friedman <https://reviews.llvm.org/D52977?id=168629#1315291>,
the RV64I shift patterns for SLLW/SRLW/SRAW make some incorrect assumptions.
SRAW assumed that (sext_inreg foo, i32) could only be produced when
sign-extended an i32. However, it can be produced by input such as:
define i64 @tricky_ashr(i64 %a, i64 %b) {
%1 = shl i64 %a, 32
%2 = ashr i64 %1, 32
%3 = ashr i64 %2, %b
ret i64 %3
}
It's important not to select sraw in the above case, because sraw only uses
bits lower 5 bits from the shift, while a shift of 32-63 would be valid.
Similarly, the patterns for srlw assumed (and foo, 0xffffffff) would only be
produced when zero-extending a value that was originally i32 in LLVM IR. This
is obviously incorrect.
This patch removes the SLLW/SRLW/SRAW shift patterns for the time being and
adds test cases that would demonstrate a miscompile if the incorrect patterns
were re-added.
llvm-svn: 348067
This patch adds CSR instructions aliases for the cases where the instruction
takes an immediate operand but the alias doesn't have the i suffix. This is
necessary for gas/gcc compatibility.
gas doesn't do a similar conversion for fsflags or fsrm, so this should be
complete.
Differential Revision: https://reviews.llvm.org/D55008
Patch by Luís Marques.
llvm-svn: 347991
This patch adds support for UNIMP in both 32- and 16-bit forms. The 32-bit
form can be seen as a variant of the ECALL/EBREAK/etc. family of instructions.
The 16-bit form is just all zeroes, which isn't a valid RISC-V instruction,
but still follows the 16-bit instruction form (i.e. bits 0-1 != 11).
Until recently unimp was undocumented and supported just by binutils, which
printed unimp for either the 16 or 32-bit form. Both forms are now documented
<https://github.com/riscv/riscv-asm-manual/pull/20> and binutils now supports
c.unimp <https://sourceware.org/ml/binutils-cvs/2018-11/msg00179.html>.
Differential Revision: https://reviews.llvm.org/D54316
Patch by Luís Marques.
llvm-svn: 347988
As discussed in the RFC
<http://lists.llvm.org/pipermail/llvm-dev/2018-October/126690.html>, 64-bit
RISC-V has i64 as the only legal integer type. This patch introduces patterns
to support codegen of the new instructions
introduced in RV64I: addiw, addiw, subw, sllw, slliw, srlw, srliw, sraw,
sraiw, ld, sd.
Custom selection code is needed for srliw as SimplifyDemandedBits will remove
lower bits from the mask, meaning the obvious pattern won't work:
def : Pat<(sext_inreg (srl (and GPR:$rs1, 0xffffffff), uimm5:$shamt), i32),
(SRLIW GPR:$rs1, uimm5:$shamt)>;
This is sufficient to compile and execute all of the GCC torture suite for
RV64I other than those files using frameaddr or returnaddr intrinsics
(LegalizeDAG doesn't know how to promote the operands - a future patch
addresses this).
When promoting i32 sltu/sltiu operands, it would be more efficient to use
sign-extension rather than zero-extension for RV64. A future patch adds a hook
to allow this.
Differential Revision: https://reviews.llvm.org/D52977
llvm-svn: 347973
SelectionDAGBuilder::visitShift will always zero-extend a shift amount when it
is promoted to the ShiftAmountTy. This results in zero-extension (masking)
which is unnecessary for RISC-V as the shift operations only read the lower 5
or 6 bits (RV32 or RV64).
I initially proposed adding a getExtendForShiftAmount hook so the shift amount
can be any-extended (D52975). @efriedma explained this was unsafe, so I have
instead eliminate the unnecessary and operations at instruction selection time
in a manner similar to X86InstrCompiler.td.
Differential Revision: https://reviews.llvm.org/D53224
llvm-svn: 344432
1. brcond operates on an condition.
2. atomic_fence and the pseudo AMO instructions should all take xlen immediates
This allows the same definitions and patterns to work for RV64 (XLenVT==i64).
llvm-svn: 343678
Examples such as `jal a3`, `j a3` and `jal a3, a3` are accepted by gas
but rejected by LLVM MC. This patch rectifies this. I introduce
RISCVAsmParser::parseJALOffset to ensure that symbol names that coincide with
register names can safely be parsed. This is made a somewhat fiddly due to the
single-operand alias form (see the comment in parseJALOffset for more info).
Differential Revision: https://reviews.llvm.org/D52029
llvm-svn: 342629
Introduce a new RISCVExpandPseudoInsts pass to expand atomic
pseudo-instructions after register allocation. This is necessary in order to
ensure that register spills aren't introduced between LL and SC, thus breaking
the forward progress guarantee for the operation. AArch64 does something
similar for CmpXchg (though only at O0), and Mips is moving towards this
approach (see D31287). See also [this mailing list
post](http://lists.llvm.org/pipermail/llvm-dev/2016-May/099490.html) from
James Knight, which summarises the issues with lowering to ll/sc in IR or
pre-RA.
See the [accompanying RFC
thread](http://lists.llvm.org/pipermail/llvm-dev/2018-June/123993.html) for an
overview of the lowering strategy.
Differential Revision: https://reviews.llvm.org/D47882
llvm-svn: 342534
This allows the hard-coded shouldForceImmediate logic to be removed because
the generated MatchOperandParserImpl makes use of the current context (i.e.
the current mnemonic) to determine parsing behaviour, and so won't first try
to parse a register before parsing a symbol name.
No functional change is intended. gas accepts immediate arguments for call,
tail and lla. This patch doesn't address this discrepancy.
Differential Revision: https://reviews.llvm.org/D51733
llvm-svn: 342488
Reject bare symbols and accept only %pcrel_hi(sym) for auipc and %hi(sym) for
lui. Also test valid operand modifiers in rv32i-valid.s.
Note this is slightly stricter than gas, which will accept either %pcrel_hi or
%hi for both lui and auipc.
Differential Revision: https://reviews.llvm.org/D51731
llvm-svn: 342486
This pseudo-instruction is similar to la but uses PC-relative addressing
unconditionally. This is, la is only different to lla when using -fPIC. This
pseudo-instruction seems often forgotten in several specs but it is definitely
mentioned in binutils opcodes/riscv-opc.c. The semantics are defined both in
page 37 of the "RISC-V Reader" book but also in function macro found in
gas/config/tc-riscv.c.
This is a very first step towards adding PIC support for Linux in the RISC-V
backend.
The lla pseudo-instruction expands to a sequence of auipc + addi with a couple
of pc-rel relocations where the second points to the first one. This is
described in
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md#pc-relative-symbol-addresses
For now, this patch only introduces support of that pseudo instruction at the
assembler parser.
Differential Revision: https://reviews.llvm.org/D49661
llvm-svn: 339314
Match the GNU assembler in supporting immediate operands for these
instructions even when the reg-reg mnemonic is used.
Differential Revision: https://reviews.llvm.org/D50046
Patch by Kito Cheng.
llvm-svn: 339252
- Save/restore only registers that are used.
This includes Callee saved registers and Caller saved registers
(arguments and temporaries) for integer and FP registers.
- If there is a call in the interrupt handler, save/restore all
Caller saved registers (arguments and temporaries) and all FP registers.
- Emit special return instructions depending on "interrupt"
attribute type.
Based on initial patch by Zhaoshi Zheng.
Reviewers: asb
Reviewed By: asb
Subscribers: rkruppe, the_o, MartinMosbeck, brucehoult, rbar, johnrusso, simoncook, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D48411
llvm-svn: 338047
These are produced by GCC and supported by GAS, but not currently contained in
the pseudoinstruction listing in the RISC-V ISA manual.
llvm-svn: 335120
Fences are inserted according to table A.6 in the current draft of version 2.3
of the RISC-V Instruction Set Manual, which incorporates the memory model
changes and definitions contributed by the RISC-V Memory Consistency Model
task group.
Instruction selection failures will now occur for 8/16/32-bit atomicrmw and
cmpxchg operations when targeting RV32IA until lowering for these operations
is added in a follow-on patch.
Differential Revision: https://reviews.llvm.org/D47589
llvm-svn: 334591
This patch adds lowering for atomic fences and relies on AtomicExpandPass to
lower atomic loads/stores, atomic rmw, and cmpxchg to __atomic_* libcalls.
test/CodeGen/RISCV/atomic-* are modelled on the exhaustive
test/CodeGen/PPC/atomics-regression.ll, and will prove more useful once RV32A
codegen support is introduced.
Fence mappings are taken from table A.6 in the current draft of version 2.3 of
the RISC-V Instruction Set Manual, which incorporates the memory model changes
and definitions contributed by the RISC-V Memory Consistency Model task group.
Differential Revision: https://reviews.llvm.org/D47587
llvm-svn: 334590
The instruction makes use of a previously ignored field in the fence
instruction. It is introduced in the version 2.3 draft of the RISC-V
specification after much work by the Memory Model Task Group.
As clarified here <https://github.com/riscv/riscv-isa-manual/issues/186>,
the fence.tso assembler mnemonic does not have operands.
llvm-svn: 334278
The implementation follows the MIPS backend and expands the pseudo instruction
directly during asm parsing. As the result, only real MC instructions are
emitted to the MCStreamer. The actual expansion to real instructions is
similar to the expansion performed by the GNU Assembler.
This patch supersedes D41949.
Differential Revision: https://reviews.llvm.org/D46118
Patch by Mario Werner.
llvm-svn: 334203
Summary:
This patch implements MC support for tail psuedo instruction.
A follow-up patch implements the codegen support as well as handling of the indirect tail pseudo instruction.
Reviewers: asb, apazos
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, llvm-commits
Differential Revision: https://reviews.llvm.org/D46221
llvm-svn: 332634
The isReMaterlizable flag is somewhat confusing, unlike most other instruction
flags it is currently interpreted as a hint (mightBeRematerializable would be
a better name). While LUI is always rematerialisable, for an instruction like
ADDI it depends on its operands. TargetInstrInfo::isTriviallyReMaterializable
will call TargetInstrInfo::isReallyTriviallyReMaterializable, which in turn
calls TargetInstrInfo::isReallyTriviallyReMaterializableGeneric. We rely on
the logic in the latter to pick out instances of ADDI that really are
rematerializable.
The isReMaterializable flag does make a difference on a variety of test
programs. The recently committed remat.ll test case demonstrates how stack
usage is reduce and a unnecessary lw/sw can be removed. Stack usage in the
Proc0 function in dhrystone reduces from 192 bytes to 112 bytes.
For the sake of completeness, this patch also implements
RISCVRegisterInfo::isConstantPhysReg. Although this is called from a number of
places, it doesn't seem to result in different codegen for any programs I've
thrown at it. However, it is called in the rematerialisation codepath and it
seems sensible to implement something correct here.
Differential Revision: https://reviews.llvm.org/D46182
llvm-svn: 332617
To do this:
1. Change GlobalAddress SDNode to TargetGlobalAddress to avoid legalizer
split the symbol.
2. Change ExternalSymbol SDNode to TargetExternalSymbol to avoid legalizer
split the symbol.
3. Let PseudoCALL match direct call with target operand TargetGlobalAddress
and TargetExternalSymbol.
Differential Revision: https://reviews.llvm.org/D44885
llvm-svn: 330827
Luis Marques