Summary:
This check finds instances where Duration values are being converted to a numeric value in a comparison expression, and suggests that the conversion happen on the other side of the expression to a Duration. See documentation for examples.
This also shuffles some code around so that the new check may perform in sone step simplifications also caught by other checks.
Patch by hwright.
Reviewers: aaron.ballman, JonasToth, alexfh, hokein
Reviewed By: JonasToth
Subscribers: sammccall, Eugene.Zelenko, xazax.hun, cfe-commits, mgorny
Tags: #clang-tools-extra
Differential Revision: https://reviews.llvm.org/D54737
llvm-svn: 348161
Summary:
We need to unpackl and unpackh the operands to use two vXi16 multiplies. Previously it looks like the low unpack would get constant folded at least in the 128-bit case after shuffle lowering turned the unpackl into ZERO_EXTEND_VECTOR_INREG and X86 custom DAG combined it. The same doesn't happen for the high half. So we'd load a constant and then shuffle it. But the low half would just be loaded and used by the multiply directly.
After this patch we now end up with a constant pool entry for the low and high unpacks separately with no shuffle operations.
This is a step towards removing custom constant folding for ZERO_EXTEND_VECTOR_INREG/SIGN_EXTEND_VECTOR_INREG in the X86 backend.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55165
llvm-svn: 348159
Summary:
Under -x86-experimental-vector-widening-legalization, fp_to_uint/fp_to_sint with a smaller than 128 bit vector type results are custom type legalized by promoting the result to a 128 bit vector by promoting the elements, inserting an assertzext/assertsext, then truncating back to original type. The truncate will be further legalizdd to a pack shuffle. In the case of a v8i8 result type, we'll end up with a v8i16 fp_to_sint. This will need to be further legalized during vector op legalization by promoting to v8i32 and then truncating again. Under avx2 this produces good code with two pack instructions, but Under avx512 this will result in a truncate instruction and a packuswb instruction. But we should be able to get away with a single truncate instruction.
The other option is to promote all the way to vXi32 result type during the first type legalization. But in some experimentation that seemed to require more work to produce good code for other configurations.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54836
llvm-svn: 348158
The clang frontend no longer emits the current working directory for
DIFiles containing an absolute path in the filename: and will move the
common prefix between current working directory and the file into the
directory: component.
https://reviews.llvm.org/D55085
llvm-svn: 348155
As discussed on llvm-dev recently, Clang currently emits redundant
directories in DIFile entries, such as
.file 1 "/Volumes/Data/llvm" "/Volumes/Data/llvm/tools/clang/test/CodeGen/debug-info-abspath.c"
This patch looks at any common prefix between the compilation
directory and the (absolute) file path and strips the redundant
part. More importantly it leaves the compilation directory empty if
the two paths have no common prefix.
After this patch the above entry is (assuming a compilation dir of "/Volumes/Data/llvm/_build"):
.file 1 "/Volumes/Data/llvm" "tools/clang/test/CodeGen/debug-info-abspath.c"
When building the FileCheck binary with debug info, this patch makes
the build artifacts ~1kb smaller.
Differential Revision: https://reviews.llvm.org/D55085
llvm-svn: 348154
At least on Linux, if a file size given to FileOutputBuffer is greater
than 2^63, it fails with "Invalid argument" error, which is not a
user-friendly error message. With this patch, lld prints out "output
file too large" instead.
llvm-svn: 348153
This patch changes the way the reproducer is initialized. Rather than
making changes at run time we now do everything at initialization time.
To make this happen we had to introduce initializer options and their SB
variant. This allows us to tell the initializer that we're running in
reproducer capture/replay mode.
Because of this change we also had to alter our testing strategy. We
cannot reinitialize LLDB when using the dotest infrastructure. Instead
we use lit and invoke two instances of the driver.
Another consequence is that we can no longer enable capture or replay
through commands. This was bound to go away form the beginning, but I
had something in mind where you could enable/disable specific providers.
However this seems like it adds very little value right now so the
corresponding commands were removed.
Finally this change also means you now have to control this through the
driver, for which I replaced --reproducer with --capture and --replay to
differentiate between the two modes.
Differential revision: https://reviews.llvm.org/D55038
llvm-svn: 348152
These are the baseline tests for D54827.
Patch based on code originally written by: @yinyuefengyi (luo xionghu)
Differential Revision: https://reviews.llvm.org/D54994
llvm-svn: 348151
Remove the pointless "+ 0" which I added for some reason when
modifying these statement/expression classes since it looks
like this is a typo. Following the suggestion of aaron.ballman
in D54902. NFC.
llvm-svn: 348150
There are potential improvements to the structure of this API
raised by D54994, but remove some cosmetic blemishes before
making any functional changes.
llvm-svn: 348149
Summary:
Memory-mapping files on Windows leads to them being locked and prevents
editors from saving changes to those files on disk. This is fine for the
compiler, but not acceptable for an interactive tool like clangd.
Therefore, we choose to avoid using memory-mapped files on Windows.
Reviewers: hokein, kadircet
Reviewed By: kadircet
Subscribers: yvvan, zturner, nik, malaperle, mgorny, ioeric, MaskRay, jkorous, arphaman, cfe-commits
Differential Revision: https://reviews.llvm.org/D55139
llvm-svn: 348147
CallExpr::setNumArgs is the only thing that prevents storing the arguments
in a trailing array. There is only 3 places in Sema where setNumArgs is called.
D54900 dealt with one of them.
This patch remove the other two calls to setNumArgs in ConvertArgumentsForCall.
To do this we do the following changes:
1.) Replace the first call to setNumArgs by an assertion since we are moving the
responsability to allocate enough space for the arguments from
Sema::ConvertArgumentsForCall to its callers
(which are Sema::BuildCallToMemberFunction, and Sema::BuildResolvedCallExpr).
2.) Add a new member function CallExpr::shrinkNumArgs, which can only be used
to drop arguments and then replace the second call to setNumArgs by
shrinkNumArgs.
3.) Add a new defaulted parameter MinNumArgs to CallExpr and its derived
classes which specifies a minimum number of argument slots to allocate.
The actual number of arguments slots allocated will be
max(number of args, MinNumArgs) with the extra args nulled. Note that
after the creation of the call expression all of the arguments will be
non-null. It is just during the creation of the call expression that some of
the last arguments can be temporarily null, until filled by default arguments.
4.) Update Sema::BuildCallToMemberFunction by passing the number of parameters
in the function prototype to the constructor of CXXMemberCallExpr. Here the
change is pretty straightforward.
5.) Update Sema::BuildResolvedCallExpr. Here the change is more complicated
since the type-checking for the function type was done after the creation of
the call expression. We need to move this before the creation of the call
expression, and then pass the number of parameters in the function prototype
(if any) to the constructor of the call expression.
6.) Update the deserialization of CallExpr and its derived classes.
Differential Revision: https://reviews.llvm.org/D54902
Reviewed By: aaron.ballman
llvm-svn: 348145
It appears that print-module-scope was not implemented for legacy SCC passes.
Fixed to print a whole module instead of just current SCC.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D54793
llvm-svn: 348144
There is no need to check that In.DynSymTab != nullptr,
because `includeInDynsym` already checks for `!Config->HasDynSymTab`
and `HasDynSymTab` is the pre-condition for In.DynSymTab creation.
llvm-svn: 348143
Summary:
SSBS (Speculative Store Bypass Safe) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds testing for
the ssbs command line option, added to allow enabling the feature
in previous Armv8-A architectures to 8.5.
Reviewers: olista01, samparker, aemerson
Reviewed By: samparker
Subscribers: javed.absar, kristof.beyls, cfe-commits
Differential Revision: https://reviews.llvm.org/D54961
llvm-svn: 348142
A loaded value with multiple users compared with 0 will become a load and
test single instruction. The load is not folded in this case (multiple
users), but the compare instruction is eliminated.
This patch returns 0 cost for the icmp in these cases.
Review: Ulrich Weigand
https://reviews.llvm.org/D55111
llvm-svn: 348141
Summary:
This was voted into C++20 in San Diego. Note that there was a revision
D0318R2 which did include unwrap_reference_t, but we mistakingly voted
P0318R1 into the C++20 Working Draft (which does not include
unwrap_reference_t). This patch implements D0318R2, which is what
we'll end up with in the Working Draft once this mistake has been
fixed.
Reviewers: EricWF, mclow.lists
Subscribers: christof, dexonsmith, libcxx-commits
Differential Revision: https://reviews.llvm.org/D54485
llvm-svn: 348138
Summary:
SSBS (Speculative Store Bypass Safe) is only mandatory from 8.5
onwards but is optional from Armv8.0-A. This patch adds a command
line option to enable SSBS, as it was previously only possible to
enable by selecting -march=armv8.5-a.
Similar patch upstream in GNU binutils:
https://sourceware.org/ml/binutils/2018-09/msg00274.html
Reviewers: olista01, samparker, aemerson
Reviewed By: samparker
Subscribers: javed.absar, kristof.beyls, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D54629
llvm-svn: 348137
Summary:
This patch contains several small fixes, which makes it possible to evaluate
expressions on Windows using information from PDB. The changes are:
- several sanitize checks;
- make IRExecutionUnit::MemoryManager::getSymbolAddress to not return a magic
value on a failure, because callers wait 0 in this case;
- entry point required to be a file address, not RVA, in the ObjectFilePECOFF;
- do not crash on a debuggee second chance exception - it may be an expression
evaluation crash. Also fix detection of "crushed" threads in tests;
- create parameter declarations for functions in AST to make it possible to call
debugee functions from expressions;
- relax name searching rules for variables, functions, namespaces and types. Now
it works just like in the DWARF plugin;
- fix endless recursion in SymbolFilePDB::ParseCompileUnitFunctionForPDBFunc.
Reviewers: zturner, asmith, stella.stamenova
Reviewed By: stella.stamenova, asmith
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53759
llvm-svn: 348136
CallExpr::setNumArgs is the only thing that prevents storing the arguments
of a call expression in a trailing array since it might resize the argument
array. setNumArgs is only called in 3 places in Sema, and for all of them it
is possible to avoid it.
This deals with the call to setNumArgs in BuildCallToObjectOfClassType.
Instead of constructing the CXXOperatorCallExpr first and later calling
setNumArgs if we have default arguments, we first construct a large
enough SmallVector, do the promotion/check of the arguments, and
then construct the CXXOperatorCallExpr.
Incidentally this also avoid reallocating the arguments when the
call operator has default arguments but this is not the primary goal.
Differential Revision: https://reviews.llvm.org/D54900
Reviewed By: aaron.ballman
llvm-svn: 348134
The introduction of S_{ADD|SUB}_U64_PSEUDO instructions which are decomposed
into VOP3 instruction pairs for S_ADD_U64_PSEUDO:
V_ADD_I32_e64
V_ADDC_U32_e64
and for S_SUB_U64_PSEUDO
V_SUB_I32_e64
V_SUBB_U32_e64
preclude the use of SDWA to encode a constant.
SDWA: Sub-Dword addressing is supported on VOP1 and VOP2 instructions,
but not on VOP3 instructions.
We desire to fold the bit-and operand into the instruction encoding
for the V_ADD_I32 instruction. This requires that we transform the
VOP3 into a VOP2 form of the instruction (_e32).
%19:vgpr_32 = V_AND_B32_e32 255,
killed %16:vgpr_32, implicit $exec
%47:vgpr_32, %49:sreg_64_xexec = V_ADD_I32_e64
%26.sub0:vreg_64, %19:vgpr_32, implicit $exec
%48:vgpr_32, dead %50:sreg_64_xexec = V_ADDC_U32_e64
%26.sub1:vreg_64, %54:vgpr_32, killed %49:sreg_64_xexec, implicit $exec
which then allows the SDWA encoding and becomes
%47:vgpr_32 = V_ADD_I32_sdwa
0, %26.sub0:vreg_64, 0, killed %16:vgpr_32, 0, 6, 0, 6, 0,
implicit-def $vcc, implicit $exec
%48:vgpr_32 = V_ADDC_U32_e32
0, %26.sub1:vreg_64, implicit-def $vcc, implicit $vcc, implicit $exec
Differential Revision: https://reviews.llvm.org/D54882
llvm-svn: 348132
Summary:
The isIndexedForCodeCompletion is called in the code patch of
SymbolCollector.
Reviewers: kadircet
Subscribers: ilya-biryukov, ioeric, MaskRay, jkorous, arphaman, cfe-commits
Differential Revision: https://reviews.llvm.org/D55206
llvm-svn: 348130
Have all classes derive from object: that's implicitly the default in Python3,
it needs to be done explicilty in Python2.
Differential Revision: https://reviews.llvm.org/D55121
llvm-svn: 348127
Python2 supports the two following equivalent construct
raise ExceptionType, exception_value
and
raise ExceptionType(exception_value)
Only the later is supported by Python3.
Differential Revision: https://reviews.llvm.org/D55195
llvm-svn: 348126
This has two positive effects. First, using a custom node prevents
recombination leading to an infinite loop since the output DAG is notionally a
little more complex than the input one. Using a flag-setting instruction also
allows the subtraction to be folded with the related comparison more easily.
https://reviews.llvm.org/D53190
llvm-svn: 348122
This patch splits backend features currently
hidden behind architecture versions.
For example, currently the only way to activate
complex numbers extension is targeting an v8.3
architecture, where after the patch this extension
can be added separately.
This refactoring is required by the new command lines proposal:
http://lists.llvm.org/pipermail/llvm-dev/2018-September/126346.html
Reviewers: DavidSpickett, olista01, t.p.northover
Subscribers: kristof.beyls, bryanpkc, javed.absar, pbarrio
Differential revision: https://reviews.llvm.org/D54633
llvm-svn: 348121
Summary:
This is a follow-up on https://reviews.llvm.org/D52879, addressing a few issues.
This:
- adds a FIXME for later improvement for specific builtins: I previously have only checked OpenCL ones and ensured tests cover those.
- fixed the CallExpr type.
Reviewers: riccibruno
Reviewed By: riccibruno
Subscribers: yaxunl, Anastasia, kristina, svenvh, cfe-commits
Differential Revision: https://reviews.llvm.org/D55136
llvm-svn: 348120
Now LLD might build the broken/incomplete .gdb_index when some DWARF v5
sections (like .debug_rnglists and .debug_addr) are used.
Particularly, for the case above, we emit an empty address area.
A test case is provided and patch fixes the issue.
Differential revision: https://reviews.llvm.org/D55109
llvm-svn: 348119
Summary: When using `LLVM_EXTERNALIZE_DEBUGINFO` in LLDB, the default dSYM location for the shared library in LLDB.framework is inside the framework bundle. With `LLVM_EXTERNALIZE_DEBUGINFO_OUTPUT_DIR` we can easily fix that. I consider it a useful feature to be able to set a global output directory for external debug info (rather then having a target-specific one). Only implemented for Darwin so far.
Reviewers: beanz, aprantl
Reviewed By: aprantl
Subscribers: mgorny, aprantl, #lldb, lldb-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D55114
llvm-svn: 348118
The test for [0x00 0x00] failed due to the introduction of c.unimp.
This particular test is unnecessary now that c.unimp was defined (and is
tested in test/MC/RISCV/rv32c-valid.s).
llvm-svn: 348117
Summary:
LLDB.framework wants a copy these headers. With this change LLDB can easily glob for the list of files:
```
get_target_property(clang_include_dir clang-headers RUNTIME_OUTPUT_DIRECTORY)
file(GLOB_RECURSE clang_vendor_headers RELATIVE ${clang_include_dir} "${clang_include_dir}/*")
```
By default `RUNTIME_OUTPUT_DIRECTORY` is unset for custom targets like `clang-headers`.
Reviewers: aprantl, JDevlieghere, davide, friss, dexonsmith
Reviewed By: JDevlieghere
Subscribers: mgorny, #lldb, cfe-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D55128
llvm-svn: 348116
When there is no .debug_addr section for some reason,
llvm-dwarfdump would print the bogus empty section name when dumping ranges
in .debug_info:
DW_AT_ranges [DW_FORM_rnglistx] (indexed (0x0) rangelist = 0x00000004
[0x0000000000000000, 0x0000000000000001) ""
[0x0000000000000000, 0x0000000000000002) "")
That happens because of the code which uses 0 (zero) as a section index as a default value.
The code should use -1ULL instead because technically 0 is a valid zero section index
in ELF and -1ULL is a special constant used that means "no section available".
This is mostly a fix for the overall correctness/safety of the code,
but a test case is provided too.
Differential revision: https://reviews.llvm.org/D55113
llvm-svn: 348115
Craig Topper