This is needed to ensure that the distribution and install-distribution
targets work properly.
Differential Revision: https://reviews.llvm.org/D41144
llvm-svn: 320537
This adds the install-*-stripped targets to LLDB, which are required for
the install-distribution-stripped option. We also need to create some
install-*-stripped targets manually, which are modeled after their
corresponding install-* targets.
Differential Revision: https://reviews.llvm.org/D41099
llvm-svn: 320443
This part of lldb make use of anonymous structs and unions. The usage is
idiomatic and doesn't deserve a warning. Logic in the NSDictionary and NSSet
plugins use anonymous structs in a manner consistent with the relevant Apple
frameworks.
Differential Revision: https://reviews.llvm.org/D40757
llvm-svn: 320071
We currently use target_link_libraries without an explicit scope
specifier (INTERFACE, PRIVATE or PUBLIC) when linking executables.
Dependencies added in this way apply to both the target and its
dependencies, i.e. they become part of the executable's link interface
and are transitive.
Transitive dependencies generally don't make sense for executables,
since you wouldn't normally be linking against an executable. This also
causes issues for generating install export files when using
LLVM_DISTRIBUTION_COMPONENTS. For example, clang has a lot of LLVM
library dependencies, which are currently added as interface
dependencies. If clang is in the distribution components but the LLVM
libraries it depends on aren't (which is a perfectly legitimate use case
if the LLVM libraries are being built static and there are therefore no
run-time dependencies on them), CMake will complain about the LLVM
libraries not being in export set when attempting to generate the
install export file for clang. This is reasonable behavior on CMake's
part, and the right thing is for LLVM's build system to explicitly use
PRIVATE dependencies for executables.
Unfortunately, CMake doesn't allow you to mix and match the keyword and
non-keyword target_link_libraries signatures for a single target; i.e.,
if a single call to target_link_libraries for a particular target uses
one of the INTERFACE, PRIVATE, or PUBLIC keywords, all other calls must
also be updated to use those keywords. This means we must do this change
in a single shot. I also fully expect to have missed some instances; I
tested by enabling all the projects in the monorepo (except dragonegg),
and configuring both with and without shared libraries, on both Darwin
and Linux, but I'm planning to rely on the buildbots for other
configurations (since it should be pretty easy to fix those).
Even after this change, we still have a lot of target_link_libraries
calls that don't specify a scope keyword, mostly for shared libraries.
I'm thinking about addressing those in a follow-up, but that's a
separate change IMO.
Differential Revision: https://reviews.llvm.org/D40823
llvm-svn: 319840
On iOS frameworks don't have versions or resources, they are flatter bundles. This updates the LLDB framework build to accommodate the flatter bundles.
llvm-svn: 309025
Summary:
This patch removes the over-specified dependencies from LLDBDependencies and instead relies on the dependencies as expressed in each library and tool.
This also removes the library looping in favor of allowing CMake to do its thing. I've tested this patch on Darwin, and found no issues, but since linker semantics vary by system I'll also work on testing it on other platforms too.
Help testing would be greatly appreciated.
Reviewers: labath, zturner
Subscribers: danalbert, srhines, mgorny, jgosnell, lldb-commits
Differential Revision: https://reviews.llvm.org/D29352
llvm-svn: 294515
Summary:
This patch does two things. First it updates all the ABI plugins with accurate dependencies, and second it adds a tracking mechanism for add_lldb_library to denote plugin libraries, allowing us to build up a list of all the configured plugins.
This list of generated plugins will be used during generating liblldb so that we can link all the plugins into the library.
If this patch looks good I will update all the other plugins in subsequent patches.
Reviewers: labath, zturner
Subscribers: nemanjai, mgorny, lldb-commits, jgosnell
Differential Revision: https://reviews.llvm.org/D29348
llvm-svn: 293696
This patch adds CMake options to add_lldb_library and add_lldb_executable for specifying LLVM components and direct library links.
This patch is NFC, but it is a small separable bit of a series of much larger patches that I'll be landing over the next day or two.
llvm-svn: 293647
This patch adds the last bit of support to get LLVM_DISTRIBUTION_COMPONENTS working with libLLDB when built as a framework.
This patch adds dummy install targets for binaries built into the framework's Resources directory, and makes the framework's install target depend on all the binaries that get installed with the framework.
llvm-svn: 290273
In LLVM's CMake we have a convention that components have both a build and an install target. Making LLDB follow this convention will allow LLDB to take advantage of the LLVM_DISTRIBUTION_COMPONENTS build option from LLVM.
llvm-svn: 289879
Summary: I was building lldb using cross mingw-w64 toolchain on Linux and observed some issues. This is first patch in the series to fix that build. It mostly corrects the case of include files and adjusts some #ifdefs from _MSC_VER to _WIN32 and vice versa. I built lldb on windows with VS after applying this patch to make sure it does not break the build there.
Reviewers: zturner, labath, abidh
Subscribers: ki.stfu, mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D27759
llvm-svn: 289821
This patch updates a bunch of places where add_dependencies was being explicitly called to add dependencies on intrinsics_gen to instead use the DEPENDS named parameter. This cleanup is needed for a patch I'm working on to add a dependency debugging mode to the build system.
llvm-svn: 287408
Summary:
The dependencies of our libraries (only liblldb, really) we marked as public, which caused all
their dependencies to be repeated when linking any executables to them. This is a problem because
then all the .a files could end up being linked twice, once to liblldb and once
again to to the executable linking against liblldb (lldb, lldb-mi). As it turns out,
our build actually depends on this behavior:
- on windows, lldb does not have getopt, so it pulls it from inside liblldb, even
though getopt is not a part of the exported interface of liblldb (maybe some of
the bsd variants have this problem as well)
- lldb-mi uses llvm, which again is not exported by liblldb
This change does not actually fix these problems (that is going to be a hard
one), but it does make them explicit by moving this magic from add_lldb_library
to the places the executable targets are defined. That way, I can link the
additional .a files only on targets that really need it, and the other targets
can build cleanly and make sure we don't regress further. It also fixes the
LLVM_LINK_LLVM_DYLIB build on linux.
Reviewers: zturner, beanz
Subscribers: ki.stfu, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D25680
llvm-svn: 284466
This code was adding an explicit dependency on libclang because lldb needs clang headers, changing this to instead depend on the clang tablegen targets means we don't have to depend on building the clang bits in libclang that lldb doesn't need.
Note this is still a bit of a hack because we're adding the dependency to all lldb libraries, instead of just the ones that need it.
llvm-svn: 282196
Summary:
This patch adds a CMake option LLDB_BUILD_FRAMEWORK, which builds libLLDB as a macOS framework instead of as a *nix shared library.
With this patch any LLDB executable that has the INCLUDE_IN_FRAMEWORK option set will be built into the Framework's resources directory, and a symlink to the exeuctable will be placed under the build directory's bin folder. Creating the symlinks allows users to run commands from the build directory without altering the workflow.
The framework generated by this patch passes the LLDB test suite, but has not been tested beyond that. It is not expected to be fully ready to ship, but it is a first step.
With this patch binaries that are placed inside the framework aren't being properly installed. Fixing that would increase the patch size significantly, so I'd like to do that in a follow-up.
Reviewers: zturner, tfiala
Subscribers: beanz, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D24749
llvm-svn: 282110
This reverts commit r279296. Including LLDBDependencies breaks the
netbsd lldb bot because it exposes LLDB_USED_LIBS, which causes
lldb_link_common_libs to run to completion in unintended sites, which
results in a malformed call to target_link_libraries.
http://lab.llvm.org:8011/builders/lldb-amd64-ninja-netbsd7/builds/5989
Thanks to Chris Bieneman for figuring this out!
llvm-svn: 279322
It's pulling in all kinds of things it doesn't need (e.g, clang-tidy!).
Eliminating this dependency removes 1056 dependencies from the
'CommandObjectFrame.cpp.o' target and 454 dependencies from the 'lldb'
target. On my machine, this shaves 7 minutes off of a clean build of
lldb.
Thanks to Zachary Turner for pointing out some issues with an earlier
version of this patch!
Differential Revision: https://reviews.llvm.org/D22987
llvm-svn: 279296
Summary: Cmake 2.8 support is gone and not coming back. We can remove a bit of legacy code now.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D23554
llvm-svn: 278924
PDB is Microsoft's debug information format, and although we
cannot yet generate it, we still must be able to consume it.
Reason for this is that debug information for system libraries
(e.g. kernel32, C Runtime Library, etc) only have debug info
in PDB format, so in order to be able to support debugging
of system code, we must support it.
Currently this code should compile on every platform, but on
non-Windows platforms the PDB plugin will return 0 capabilities,
meaning that for now PDB is only supported on Windows. This
may change in the future, but the API is designed in such a way
that this will require few (if any) changes on the LLDB side.
In the future we can just flip a switch and everything will
work.
This patch only adds support for line tables. It does not return
information about functions, types, global variables, or anything
else. This functionality will be added in a followup patch.
Differential Revision: http://reviews.llvm.org/D17363
Reviewed by: Greg Clayton
llvm-svn: 262528
Linking with LLVM shared libraries currently produces linker errors. This works around the issue
(pr24953) by disabling linking with llvm so for lldb libraries.
Patch by Evangelos Foutras.
Reviewers: zturner
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D16293
llvm-svn: 258921
Adding the following flag to a cmake line:
-DLLDB_EXPORT_ALL_SYMBOLS=TRUE
will cause all symbols to be exported from liblldb. This enables the llvm
backtrace mechanism to see and report backtrace symbols properly when using
(lldb) log enable --stack ...
Prior to this change, only the SB API symbols would show up on Linux and other
systems that use a public-symbols-based backtrace lookup mechanism.
log enable --stack ... is a very handy, quick way to understand the flow
of how some log lines are getting hit within lldb without having to hook
up a top-level debugger over your current debug session.
llvm-svn: 250299
Summary:
Several changes to fix CMake builds of LLDB with the
BUILD_SHARED_LIBS setting on.
- Force all internal libraries to be built STATIC.
- Add additional library dependencies (pthread, dl,
runtimedyld).
- modify finalisation of SWIG wrapper to symlink the
"lib" dir into python/site-packages, so _lldb.so's
RPATH resolves.
Test Plan: Verified one test case with "dotest.py".
Reviewers: sylvestre.ledru, zturner
Reviewed By: zturner
Subscribers: zturner, ted, tberghammer, emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D10157
llvm-svn: 239007
The existing state of affairs was getting a little unwieldy.
All of LLDB's utility functions and initial configuration was in
the root CMake file. I split this up into 3 separate files and
moved them to relevant subfolders under cmake/modules.
Also, I deleted the add_lldb_definitions() function. It seemed
to be somewhat useless and did not serve any real purpose that
I was able to figure out.
llvm-svn: 231010
Petr Hosek