To enable Flang testing on Windows, shell scripts have to be ported to Python. In this patch the "test_errors.sh" script is ported to python ("test_errors.py"). The RUN line of existing tests was changed to make use of the python script.
Used python regex in place of awk/sed.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D107575
When a function is called in a specification expression, it must be
sufficiently defined, and cannot be a recursive call (10.1.11(5)).
The best fix for this is to change the contract for the procedure
characterization infrastructure to catch and report such errors,
and to guarantee that it does emit errors on failed characterizations.
Some call sites were adjusted to avoid cascades.
Differential Revision: https://reviews.llvm.org/D104330
Allow the lit test suite to run under Windows. This encompasses the following changes:
* Define `lit_tools_dir` for flang's test configuration
* Replace `(<command> || true)` idiom with `not <command>`
* Add `REQUIRES: shell` on tests that invoke a shell script
Reviewed By: awarzynski
Differential Revision: https://reviews.llvm.org/D89368
This patch updates most of the remaining regression tests (~400) to use
`flang-new` rather then `f18` when `FLANG_BUILD_NEW_DRIVER` is set.
This allows us to share more Flang regression tests between `f18` and
`flang-new`. A handful of tests have not been ported yet - these are
currently either failing or not supported by the new driver.
Summary of changes:
* RUN lines in tests are updated to use `%flang_fc1` instead of `%f18`
* option spellings in tests are updated to forms accepted by both `f18` and
`flang-new`
* variables in Bash scripts are renamed (e.g. F18 --> FLANG_FC1)
The updated tests will now be run with the new driver, `flang-new`,
whenever it is enabled (i.e when `FLANG_BUILD_NEW_DRIVER` is set).
Although this patch touches many files, vast majority of the changes are
automatic:
```
grep -IEZlr "%f18" flang/test/ | xargs -0 -l sed -i 's/%f18/%flang_fc1/g
```
Differential Revision: https://reviews.llvm.org/D100309
Replace semantics::SymbolSet with alternatives that clarify
whether the set should order its contents by source position
or not. This matters because positionally-ordered sets must
not be used for Symbols that might be subjected to name
replacement during name resolution, and address-ordered
sets must not be used (without sorting) in circumstances
where the order of their contents affects the output of the
compiler.
All set<> and map<> instances in the compiler that are keyed
by Symbols now have explicit Compare types in their template
instantiations. Symbol::operator< is no more.
Differential Revision: https://reviews.llvm.org/D98878
In parser::AllCookedSources, implement a map from CharBlocks to
the CookedSource instances that they cover. This permits a fast
Find() operation based on std::map::equal_range to map a CharBlock
to its enclosing CookedSource instance.
Add a creation order number to each CookedSource. This allows
AllCookedSources to provide a Precedes(x,y) predicate that is a
true source stream ordering between two CharBlocks -- x is less
than y if it is in an earlier CookedSource, or in the same
CookedSource at an earlier position.
Add a reference to the singleton SemanticsContext to each Scope.
All of this allows operator< to be implemented on Symbols by
means of a true source ordering. From a Symbol, we get to
its Scope, then to the SemanticsContext, and then use its
AllCookedSources reference to call Precedes().
Differential Revision: https://reviews.llvm.org/D98743
We have a "<" operator defined on the type semantics::Symbol that's based on
the symbols' locations in the cooked character stream. This is potentially
problematic when comparing symbols from .mod files when the cooked character
streams themselves might be allocated to varying memory locations.
This change fixes that by using the order in which symbols are created as the
basis for the "<" operator. Thanks to Tim and Peter for consultation on the
necessity of doing this and the idea for what to use as the basis of the sort.
This change in the "<" operator changed the expected results for three of the
tests. I manually inspected the new results, and they look OK to me. The
differences in data05.f90 and typeinfo01.f90 are entirely the order, offsets,
and sizes of the derived type components. The changes in resolve102.f90 are
due to the new, different "<" operator used for sorting.
Differential Revision: https://reviews.llvm.org/D98225
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined
dummy procedure arguments by removing extra apostrophes and sorting the
list of symbols.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This patch supersedes D97749.
Differential Revision: https://reviews.llvm.org/D97774
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was defined using
the location of the name of the procedure. But the location of the procedure
name was being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous symbols.
I fixed this by changing SymbolSet to be an unordered set that uses the
contents of the name of the symbol as the basis for its hash function. This
works because the contents of the name of the symbol is preserved by
ReplaceName() even though its location changes.
I also fixed the error message used when reporting recursively defined dummy
procedure arguments.
I also added tests that will crash the compiler without this change.
Note that the "<" operator is used in other contexts, for example, in the map
of characterized procedures, maps of items in equivalence sets, maps of
structure constructor values, ... All of these situations happen after name
resolution has been completed and all calls to ReplaceName() have already
happened and thus are not subject to the problem I ran into when ReplaceName()
was called when processing procedure entities.
Note also that the implementation of the "<" operator uses the relative
location in the cooked character stream as the basis of its implementation.
This is potentially problematic when symbols from diffent compilation units
(for example symbols originating in .mod files) are put into the same map since
their names will appear in two different source streams which may not be
allocated in the same relative positions in memory. But I was unable to create
a test that caused a problem. Using a direct comparison of the content of the
name of the symbol in the "<" operator has problems. Symbols in enclosing or
parallel scopes can have the same name. Also using the location of the symbol
in the cooked character stream has the advantage that it preserves the the
order of the symbols in a structure constructor constant, which makes matching
the values with the symbols relatively easy.
This change supersedes D97201.
Differential Revision: https://reviews.llvm.org/D97749
This reverts commit 07de0846a5.
The original patch has caused 6 out 8 of Flang's public buildbots to
fail. As I'm not sure what the fix should be, I'm reverting this for
now. Please see https://reviews.llvm.org/D97201 for more context and
discussion.
It's possible to define a procedure whose interface depends on a procedure
which has an interface that depends on the original procedure. Such a circular
definition was causing the compiler to fall into an infinite loop when
resolving the name of the second procedure. It's also possible to create
circular dependency chains of more than two procedures.
I fixed this by adding the function HasCycle() to the class DeclarationVisitor
and calling it from DeclareProcEntity() to detect procedures with such
circularly defined interfaces. I marked the associated symbols of such
procedures by calling SetError() on them. When processing subsequent
procedures, I called HasError() before attempting to analyze their interfaces.
Unfortunately, this did not work.
With help from Tim, we determined that the SymbolSet used to track the
erroneous symbols was instantiated using a "<" operator which was
defined using the name of the procedure. But the procedure name was
being changed by a call to ReplaceName() between the times that the
calls to SetError() and HasError() were made. This caused HasError() to
incorrectly report that a symbol was not in the set of erroneous
symbols. I fixed this by making SymbolSet be an ordered set, which does
not use the "<" operator.
I also added tests that will crash the compiler without this change.
And I fixed the formatting on an error message from a previous update.
Differential Revision: https://reviews.llvm.org/D97201
It's possible to define a procedure that has a procedure dummy argument which
names the procedure that contains it. This was causing the compiler to fall
into an infinite loop when characterizing a call to the procedure.
Following a suggestion from Peter, I fixed this be maintaining a set of
procedure symbols that had already been seen while characterizing a procedure.
This required passing a new parameter to the functions that characterized a
Procedure, a DummyArgument, and a DummyProcedure.
I also added several tests that will crash the compiler without this change.
Differential Revision: https://reviews.llvm.org/D96631
Ivan Zhechev