Linkers normally read all the relocations upfront to compute the references
between sections. Putting them together is a bit more cache friendly.
I benchmarked linking a Release+Asserts clang with gold on a vm. I tried all
4 combinations of --gc-sections/no --gc-section hot and cold cache.
I cleared the cache with
echo 3 > /proc/sys/vm/drop_caches
and warmed it up by running the link once before timing the subsequent ones.
With cold cache and --gc-sections the time goes from
1.86130781665 +- 0.01713126697463843 seconds
to
1.82370735105 +- 0.014127522318814516 seconds
With cold cache and no --gc-sections the time goes from
1.6087245435500002 +- 0.012999066825178644 seconds
to
1.5687122041500001 +- 0.013145850126026619 seconds
With hot cache and no --gc-sections the time goes from
0.926200939 ( +- 0.33% ) seconds
to
0.907200079 ( +- 0.31% ) seconds
With hot cache and gc sections the time goes from
1.183038049 ( +- 0.34% ) seconds
to
1.147355862 ( +- 0.39% ) seconds
llvm-svn: 235165
See r230786 and r230794 for similar changes to gep and load
respectively.
Call is a bit different because it often doesn't have a single explicit
type - usually the type is deduced from the arguments, and just the
return type is explicit. In those cases there's no need to change the
IR.
When that's not the case, the IR usually contains the pointer type of
the first operand - but since typed pointers are going away, that
representation is insufficient so I'm just stripping the "pointerness"
of the explicit type away.
This does make the IR a bit weird - it /sort of/ reads like the type of
the first operand: "call void () %x(" but %x is actually of type "void
()*" and will eventually be just of type "ptr". But this seems not too
bad and I don't think it would benefit from repeating the type
("void (), void () * %x(" and then eventually "void (), ptr %x(") as has
been done with gep and load.
This also has a side benefit: since the explicit type is no longer a
pointer, there's no ambiguity between an explicit type and a function
that returns a function pointer. Previously this case needed an explicit
type (eg: a function returning a void() function was written as
"call void () () * @x(" rather than "call void () * @x(" because of the
ambiguity between a function returning a pointer to a void() function
and a function returning void).
No ambiguity means even function pointer return types can just be
written alone, without writing the whole function's type.
This leaves /only/ the varargs case where the explicit type is required.
Given the special type syntax in call instructions, the regex-fu used
for migration was a bit more involved in its own unique way (as every
one of these is) so here it is. Use it in conjunction with the apply.sh
script and associated find/xargs commands I've provided in rr230786 to
migrate your out of tree tests. Do let me know if any of this doesn't
cover your cases & we can iterate on a more general script/regexes to
help others with out of tree tests.
About 9 test cases couldn't be automatically migrated - half of those
were functions returning function pointers, where I just had to manually
delete the function argument types now that we didn't need an explicit
function type there. The other half were typedefs of function types used
in calls - just had to manually drop the * from those.
import fileinput
import sys
import re
pat = re.compile(r'((?:=|:|^|\s)call\s(?:[^@]*?))(\s*$|\s*(?:(?:\[\[[a-zA-Z0-9_]+\]\]|[@%](?:(")?[\\\?@a-zA-Z0-9_.]*?(?(3)"|)|{{.*}}))(?:\(|$)|undef|inttoptr|bitcast|null|asm).*$)')
addrspace_end = re.compile(r"addrspace\(\d+\)\s*\*$")
func_end = re.compile("(?:void.*|\)\s*)\*$")
def conv(match, line):
if not match or re.search(addrspace_end, match.group(1)) or not re.search(func_end, match.group(1)):
return line
return line[:match.start()] + match.group(1)[:match.group(1).rfind('*')].rstrip() + match.group(2) + line[match.end():]
for line in sys.stdin:
sys.stdout.write(conv(re.search(pat, line), line))
llvm-svn: 235145
This is a major rewrite of the SelectionDAG switch lowering. The previous code
would lower switches as a binary tre, discovering clusters of cases
suitable for lowering by jump tables or bit tests as it went along. To increase
the likelihood of finding jump tables, the binary tree pivot was selected to
maximize case density on both sides of the pivot.
By not selecting the pivot in the middle, the binary trees would not always
be balanced, leading to performance problems in the generated code.
This patch rewrites the lowering to search for clusters of cases
suitable for jump tables or bit tests first, and then builds the binary
tree around those clusters. This way, the binary tree will always be balanced.
This has the added benefit of decoupling the different aspects of the lowering:
tree building and jump table or bit tests finding are now easier to tweak
separately.
For example, this will enable us to balance the tree based on profile info
in the future.
The algorithm for finding jump tables is O(n^2), whereas the previous algorithm
was O(n log n) for common cases, and quadratic only in the worst-case. This
doesn't seem to be major problem in practice, e.g. compiling a file consisting
of a 10k-case switch was only 30% slower, and such large switches should be rare
in practice. Compiling e.g. gcc.c showed no compile-time difference. If this
does turn out to be a problem, we could limit the search space of the algorithm.
This commit also disables all optimizations during switch lowering in -O0.
Differential Revision: http://reviews.llvm.org/D8649
llvm-svn: 235101
Summary: Previously, this was only happening for functions, but because of .insn, objects can also be marked now.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8007
llvm-svn: 235095
Summary:
This assembler directive marks the current label as an instruction label in microMIPS and MIPS16.
This initial implementation works only for microMIPS.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8006
llvm-svn: 235084
BXJ was incorrectly said to be unsupported in ARMv8-A. It is not
supported in the A64 instruction set, but it is supported in the T32
and A32 instruction sets, because it's listed as an instruction in the
ARM ARM section F7.1.28.
Using SP as an operand to BXJ changed from UNPREDICTABLE to
PREDICTABLE in v8-A. This patch reflects that update as well.
This was found by MCHammer.
llvm-svn: 235024
Many of these predate llvm-readobj. With elf-dump we had to match
a relocation to symbol number and symbol number to symbol name or
section number.
llvm-svn: 235015
The ARMv8 ARMARM states that for these instructions in A64 state:
"Unspecified bits in "imm5" are ignored but should be set to zero by an assembler.", (imm4 for INS).
Make the disassembler accept any encoding with these ignored bits set to 1.
llvm-svn: 234896
Some targets (ie. Mips) have additional rules for ordering the relocation
table entries. Allow them to override generic sortRelocs(), which sorts
entries by Offset.
Then override this function for Mips, to emit HI16 and GOT16 relocations
against the local symbol in pair with the corresponding LO16 relocation.
Patch by Vladimir Stefanovic.
Differential Revision: http://reviews.llvm.org/D7414
llvm-svn: 234883
Summary:
When instruction bundling is enabled and the -mc-relax-all flag is
set, we can write bundle padding directly into fragments and avoid
creating large number of fragments significantly reducing LLVM MC
memory usage.
Test Plan: Regression test attached
Reviewers: eliben
Subscribers: jfb, mseaborn
Differential Revision: http://reviews.llvm.org/D8072
llvm-svn: 234714
This patch corresponds to review:
http://reviews.llvm.org/D8928
It adds direct move instructions to/from VSX registers to GPR's. These are
exploited for FP <-> INT conversions.
llvm-svn: 234682
This is the patch corresponding to review:
http://reviews.llvm.org/D8406
It adds some missing instructions from ISA 2.06 to the PPC back end.
llvm-svn: 234546
Summary:
Even though there is no 2nd register operand in the "lw/sw $8, symbol" case, we still try to find one,
and we end up with $0, which makes us generate an unnecessary "addu $8, $8, $0" (a.k.a. "move $8, $8").
We can avoid this by checking if the 2nd register operand is different from $0, before generating the addu.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8055
llvm-svn: 234406
Summary:
They are of the form "bnezl/beqzl $rs, offset" and expand to "bnel/beql $rs, $zero, offset".
These instructions are used in Linux inline assembly.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8540
llvm-svn: 234401
One could make the argument for writing it immediately after the ELF header,
but writing it in the middle of the sections like we were doing just makes
it harder for no reason.
llvm-svn: 234400
Summary:
These AssemblerPredicate's are unnecessary and actually make some instructions unusable when assembling pre-MIPS32 ISAs.
For example, this was causing the IAS to reject the 'j' instruction for MIPS I-V.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8300
llvm-svn: 234398
This is currently considered experimental, but most of the more
commonly used instructions should work.
So far only SI has been extensively tested, CI and VI probably work too,
but may be buggy. The current set of tests cases do not give complete
coverage, but I think it is sufficient for an experimental assembler.
See the documentation in R600Usage for more information.
llvm-svn: 234381
We weren't checking the sign of the floating point immediate before translating
it to "fmov sD, wzr". Similarly for D-regs.
Technically "movi vD.2s, #0x80, lsl #24" would work most of the time, but it's
not a blessed alias (and I don't think it should be since people expect writing
sD to zero out the high lanes, and there's no dD equivalent). So an error it is.
rdar://20455398
llvm-svn: 234372
Summary:
This is not possible when using the IAS for MIPS, but it is possible when using the IAS for other architectures and when using GAS for MIPS.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8578
llvm-svn: 234316
After recognising that a certain narrow instruction might need a relocation to
be represented, we used to unconditionally relax it to a Thumb2 instruction to
permit this. Unfortunately, some CPUs (e.g. v6m) don't even have most Thumb2
instructions, so we end up emitting a completely invalid instruction.
Theoretically, ELF does have relocations for these situations; but they are
fairly unusable with such short ranges and the ABI document even says they're
documented "for completeness". So an error is probably better there too.
rdar://20391953
llvm-svn: 234195
Before when deciding if we needed a relocation in A-B, we wore only checking
if A was weak.
This fixes the asymmetry.
The "InSet" argument should probably be renamed to "ForValue", since InSet is
very MachO specific, but doing so in this patch would make it hard to read.
This fixes PR22815.
llvm-svn: 234165
This allows the compiler/assembly programmer to switch back to a
section. This in turn fixes the bootstrap failure on powerpc (tested
on gcc110) without changing the ppc codegen at all.
I will try to cleanup the various getELFSection overloads in a followup patch.
Just using a default argument now would lead to ambiguities.
llvm-svn: 234099
Fixes PR19582.
Previously, when an asm assignment (.set or =) was created, we would look up
the section immediately in MCSymbol::setVariableValue. This caused symbols
to receive the wrong section if the RHS of the assignment had not been seen
yet. This had a knock-on effect in the object file emitters, causing them
to emit extra symbols, or to give symbols the wrong visibility or the wrong
section. For example, in the following asm:
.data
.Llocal:
.text
leaq .Llocal1(%rip), %rdi
.Llocal1 = .Llocal2
.Llocal2 = .Llocal
the first assignment would give .Llocal1 a null section, which would never get
fixed up by the second assignment. This would cause the ELF object file emitter
to consider .Llocal1 to be an undefined symbol and give it external linkage,
even though .Llocal1 should not have been emitted at all in the object file.
Or in the following asm:
alias_to_local = Ltmp0
Ltmp0:
the Mach-O object file emitter would give the alias_to_local symbol a n_type
of N_SECT and a n_sect of 0. This is invalid under the Mach-O specification,
which requires N_SECT symbols to receive a non-zero section number if the
symbol is defined in a section in the object file.
https://developer.apple.com/library/mac/documentation/DeveloperTools/Conceptual/MachORuntime/#//apple_ref/c/tag/nlist
After this change we do not look up the section when the assignment is created,
but instead look it up on demand and store it in Section, which is treated
as a cache if the symbol is a variable symbol.
This change also fixes a bug in MCExpr::FindAssociatedSection. Previously,
if we saw a subtraction, we would return the first referenced section, even in
cases where we should have been returning the absolute pseudo-section. Now we
always return the absolute pseudo-section for expressions that subtract two
section-derived expressions. This isn't always correct (e.g. if one of the
sections ends up being laid out at an absolute address), but it's probably
the best we can do without more context.
This allows us to remove code in two places where we appear to have been
working around this bug, in MachObjectWriter::markAbsoluteVariableSymbols
and in X86AsmPrinter::EmitStartOfAsmFile.
Re-applies r233595 (aka D8586), which was reverted in r233898.
Differential Revision: http://reviews.llvm.org/D8798
llvm-svn: 233995
v8.1a is renamed to architecture, following current entity naming approach.
Excess generic cpu is removed. Intended use: "generic" cpu with "v8.1a" subtarget feature
Reviewers: jmolloy
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8767
llvm-svn: 233811
So far, we do not yet support any instruction specific to zEC12.
Most of the facilities added with zEC12 are indeed not very useful
to compiler code generation, but there is one exception: the
miscellaneous-extensions facility provides the RISBGN instruction,
which is a variant of RISBG that does not set the condition code.
Add support for this facility, MC support for RISBGN, and CodeGen
support for prefering RISBGN over RISBG on zEC12, unless we can
actually make use of the condition code set by RISBG.
llvm-svn: 233690
We already exploit a number of instructions specific to z196,
but not yet POPCNT. Add support for the population-count
facility, MC support for the POPCNT instruction, CodeGen
support for using POPCNT, and implement the getPopcntSupport
TargetTransformInfo hook.
llvm-svn: 233689
This fixes the visibility of symbols in certain edge cases involving aliases
with multiple levels of indirection.
Fixes PR19582.
Differential Revision: http://reviews.llvm.org/D8586
llvm-svn: 233595
The asm syntax for the 32-bit rotate-and-mask instructions can take a 32-bit
bitmask instead of an (mb, me) pair. This syntax is not specified in the Power
ISA manual, but is accepted by GNU as, and is documented in IBM's Assembler
Language Reference. The GNU Multiple Precision Arithmetic Library (gmp)
contains assembly that uses this syntax.
To implement this, I moved the isRunOfOnes utility function from
PPCISelDAGToDAG.cpp to PPCMCTargetDesc.h.
llvm-svn: 233483
There is something in link.exe that requires a relocation to use a
global symbol. Not doing so breaks the chrome build on windows.
This patch sets isWeak for that to work. To compensate,
we then need to look past those symbols when not creating relocations.
This patch includes an ELF test that matches GNU as behaviour.
I am still reducing the chrome build issue and will add a test
once that is done.
llvm-svn: 233318
The "|&" operator isn't POSIX, so it can fail depending on the host's
default shell. Avoid it.
There were also a couple of places that did "2>1", but this creates a
file called "1". They clearly meant "2>&1".
llvm-svn: 233309
This patch adds Hardware Transaction Memory (HTM) support supported by ISA 2.07
(POWER8). The intrinsic support is based on GCC one [1], but currently only the
'PowerPC HTM Low Level Built-in Function' are implemented.
The HTM instructions follows the RC ones and the transaction initiation result
is set on RC0 (with exception of tcheck). Currently approach is to create a
register copy from CR0 to GPR and comapring. Although this is suboptimal, since
the branch could be taken directly by comparing the CR0 value, it generates code
correctly on both test and branch and just return value. A possible future
optimization could be elimitate the MFCR instruction to branch directly.
The HTM usage requires a recently newer kernel with PPC HTM enabled. Tested on
powerpc64 and powerpc64le.
This is send along a clang patch to enabled the builtins and option switch.
[1] https://gcc.gnu.org/onlinedocs/gcc/PowerPC-Hardware-Transactional-Memory-Built-in-Functions.html
Phabricator Review: http://reviews.llvm.org/D8247
llvm-svn: 233204
The previous logic was to first try without relocations at all
and failing that stop on the first defined symbol.
That was inefficient and incorrect in the case part of the
expression could be simplified and another part could not
(see included test).
We now stop the evaluation when we get to a variable whose value
can change (i.e. is weak).
llvm-svn: 233187
In a subtraction of the form A - B, if B is weak, there is no way to represent
that on ELF since all relocations add the value of a symbol.
llvm-svn: 233139
The main differences are:
* Split in 32 and 64 bit functions.
* First switch on the Modifier so that we have only one non fully covered
switch.
* Map the fixup kind first to a x86_64 (or i386) specific enum, to make
it easy to handle cases like X86::reloc_riprel_4byte_movq_load.
* Switch on IsPCRel last, which reduces code duplication.
Fixes pr22308.
llvm-svn: 232837
Before this patch code wanting to create temporary labels for a given entity
(function, cu, exception range, etc) had to keep its own counter to have stable
symbol names.
createTempSymbol would still add a suffix to make sure a new symbol was always
returned, but it kept a single counter. Because of that, if we were to use
just createTempSymbol("cu_begin"), the label could change from cu_begin42 to
cu_begin43 because some other code started using temporary labels.
Simplify this by just keeping one counter per prefix and removing the various
specialized counters.
llvm-svn: 232535
Summary:
This adds a MipsInstAlias which expands to XORi $reg,$reg,imm. For example, "xor $6, 0x3A" should be expanded to "xori $6, $6, 58".
This should work for all MIPS ISAs.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8284
llvm-svn: 232473
ARMv6K is another layer between ARMV6 and ARMV6T2. This is the LLVM
side of the changes.
ARMV6 family LLVM implementation.
+-------------------------------------+
| ARMV6 |
+----------------+--------------------+
| ARMV6M (thumb) | ARMV6K (arm,thumb) | <- From ARMV6K and ARMV6M processors
+----------------+--------------------+ have support for hint instructions
| ARMV6T2 (arm,thumb,thumb2) | (SEV/WFE/WFI/NOP/YIELD). They can
+-------------------------------------+ be either real or default to NOP.
| ARMV7 (arm,thumb,thumb2) | The two processors also use
+-------------------------------------+ different encoding for them.
Patch by Vinicius Tinti.
llvm-svn: 232468
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
llvm-svn: 232184
This is a follow-up to r231182. This adds the "vbroadcasti128" instruction
back, but without the intrinsic mapping. Also add a test to check the
instriction encoding.
This is related to rdar://problem/18742778.
llvm-svn: 231945
Follow up from r231505.
Fix the non-determinism by using a MapVector and reintroduce the AArch64
testcase. Defer deleting the got candidates up to the end and remove
them in a bulk, avoiding linear time removal of each element.
Thanks to Renato Golin for trying it out on other platforms.
llvm-svn: 231830
The checking for extgotequiv and localgotequiv rely on the emission
order, which is not guaranteed because we use DenseMap to hold the GOT
equivalents. XFAIL this now until I get time to use MapVector and test
out the solution. In the meantime, appease buildbots.
llvm-svn: 231497
Add MachO 32-bit (i.e. arm and x86) support for replacing global GOT equivalent
symbol accesses. Unlike 64-bit targets, there's no GOTPCREL relocation, and
access through a non_lazy_symbol_pointers section is used instead.
-- before
_extgotequiv:
.long _extfoo
_delta:
.long _extgotequiv-_delta
-- after
_delta:
.long L_extfoo$non_lazy_ptr-_delta
.section __IMPORT,__pointers,non_lazy_symbol_pointers
L_extfoo$non_lazy_ptr:
.indirect_symbol _extfoo
.long 0
llvm-svn: 231475
Follow up r230264 and add ARM64 support for replacing global GOT
equivalent symbol accesses by references to the GOT entry for the final
symbol instead, example:
-- before
.globl _foo
_foo:
.long 42
.globl _gotequivalent
_gotequivalent:
.quad _foo
.globl _delta
_delta:
.long _gotequivalent-_delta
-- after
.globl _foo
_foo:
.long 42
.globl _delta
Ltmp3:
.long _foo@GOT-Ltmp3
llvm-svn: 231474
Summary:
None of the .set directives can be used before the .module directives. The .set mips0/pop/push were not triggering this constraint.
Also added testing for all the other implemented directives which are supposed to trigger this constraint.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7140
llvm-svn: 231465
We supported forming IMGREL relocations from ConstantExprs involving
__ImageBase if the minuend was a GlobalVariable. Extend this
functionality to all GlobalObjects.
llvm-svn: 231456
Move the specialized metadata nodes for the new debug info hierarchy
into place, finishing off PR22464. I've done bootstraps (and all that)
and I'm confident this commit is NFC as far as DWARF output is
concerned. Let me know if I'm wrong :).
The code changes are fairly mechanical:
- Bumped the "Debug Info Version".
- `DIBuilder` now creates the appropriate subclass of `MDNode`.
- Subclasses of DIDescriptor now expect to hold their "MD"
counterparts (e.g., `DIBasicType` expects `MDBasicType`).
- Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp`
for printing comments.
- Big update to LangRef to describe the nodes in the new hierarchy.
Feel free to make it better.
Testcase changes are enormous. There's an accompanying clang commit on
its way.
If you have out-of-tree debug info testcases, I just broke your build.
- `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to
update all the IR testcases.
- Unfortunately I failed to find way to script the updates to CHECK
lines, so I updated all of these by hand. This was fairly painful,
since the old CHECKs are difficult to reason about. That's one of
the benefits of the new hierarchy.
This work isn't quite finished, BTW. The `DIDescriptor` subclasses are
almost empty wrappers, but not quite: they still have loose casting
checks (see the `RETURN_FROM_RAW()` macro). Once they're completely
gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I
also expect to make a few schema changes now that it's easier to reason
about everything.
llvm-svn: 231082
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
Summary:
Currently fast-isel-abort will only abort for regular instructions,
and just warn for function calls, terminators, function arguments.
There is already fast-isel-abort-args but nothing for calls and
terminators.
This change turns the fast-isel-abort options into an integer option,
so that multiple levels of strictness can be defined.
This will help no being surprised when the "abort" option indeed does
not abort, and enables the possibility to write test that verifies
that no intrinsics are forgotten by fast-isel.
Reviewers: resistor, echristo
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D7941
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 230775
On 32bits x86 Darwin, the register mappings for the eh_frane and
debug_frame sections are different. Thus the same CFI instructions
should result in different registers in the object file. The
problem isn't target specific though, but it requires that the
mappings for EH register numbers be different from the standard
Dwarf one.
The patch looks a bit clumsy. LLVM uses the EH mapping as
canonical for everything frame related. Thus we need to do a
double conversion EH -> LLVM -> Non-EH, when emitting the
debug_frame section.
Fixes PR22363.
Differential Revision: http://reviews.llvm.org/D7593
llvm-svn: 230670
This adds support for the QPX vector instruction set, which is used by the
enhanced A2 cores on the IBM BG/Q supercomputers. QPX vectors are 256 bytes
wide, holding 4 double-precision floating-point values. Boolean values, modeled
here as <4 x i1> are actually also represented as floating-point values
(essentially { -1, 1 } for { false, true }). QPX shares many features with
Altivec and VSX, but is distinct from both of them. One major difference is
that, instead of adding completely-separate vector registers, QPX vector
registers are extensions of the scalar floating-point registers (lane 0 is the
corresponding scalar floating-point value). The operations supported on QPX
vectors mirrors that supported on the scalar floating-point values (with some
additional ones for permutations and logical/comparison operations).
I've been maintaining this support out-of-tree, as part of the bgclang project,
for several years. This is not the entire bgclang patch set, but is most of the
subset that can be cleanly integrated into LLVM proper at this time. Adding
this to the LLVM backend is part of my efforts to rebase bgclang to the current
LLVM trunk, but is independently useful (especially for codes that use LLVM as
a JIT in library form).
The assembler/disassembler test coverage is complete. The CodeGen test coverage
is not, but I've included some tests, and more will be added as follow-up work.
llvm-svn: 230413
Front-ends could use global unnamed_addr to hold pointers to other
symbols, like @gotequivalent below:
@foo = global i32 42
@gotequivalent = private unnamed_addr constant i32* @foo
@delta = global i32 trunc (i64 sub (i64 ptrtoint (i32** @gotequivalent to i64),
i64 ptrtoint (i32* @delta to i64))
to i32)
The global @delta holds a data "PC"-relative offset to @gotequivalent,
an unnamed pointer to @foo. The darwin/x86-64 assembly output for this follows:
.globl _foo
_foo:
.long 42
.globl _gotequivalent
_gotequivalent:
.quad _foo
.globl _delta
_delta:
.long _gotequivalent-_delta
Since unnamed_addr indicates that the address is not significant, only
the content, we can optimize the case above by replacing pc-relative
accesses to "GOT equivalent" globals, by a PC relative access to the GOT
entry of the final symbol instead. Therefore, "delta" can contain a pc
relative relocation to foo's GOT entry and we avoid the emission of
"gotequivalent", yielding the assembly code below:
.globl _foo
_foo:
.long 42
.globl _delta
_delta:
.long _foo@GOTPCREL+4
There are a couple of advantages of doing this: (1) Front-ends that need
to emit a great deal of data to store pointers to external symbols could
save space by not emitting such "got equivalent" globals and (2) IR
constructs combined with this opt opens a way to represent GOT pcrel
relocations by using the LLVM IR, which is something we previously had
no way to express.
Differential Revision: http://reviews.llvm.org/D6922
rdar://problem/18534217
llvm-svn: 230264
Summary:
These ISA's didn't add any instructions so they are almost identical to
Mips32r2 and Mips64r2. Even the ELF e_flags are the same, However the ISA
revision in .MIPS.abiflags is 3 or 5 respectively instead of 2.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: tomatabacu, llvm-commits, atanasyan
Differential Revision: http://reviews.llvm.org/D7381
llvm-svn: 229695
Summary:
Parse for an MCExpr instead of an Identifier and use the symbol for relocations, not just the symbol's name.
This fixes errors when using local labels in .cpsetup (PR22518).
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: seanbruno, emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D7697
llvm-svn: 229671
The current SystemZ back-end only supports the local-exec TLS access model.
This patch adds all required MC support for the other TLS models, which
means in particular:
- Support additional relocation types for
Initial-exec model: R_390_TLS_IEENT
Local-dynamic-model: R_390_TLS_LDO32, R_390_TLS_LDO64,
R_390_TLS_LDM32, R_390_TLS_LDM64, R_390_TLS_LDCALL
General-dynamic model: R_390_TLS_GD32, R_390_TLS_GD64, R_390_TLS_GDCALL
- Support assembler syntax to generate additional relocations
for use with __tls_get_offset calls:
:tls_gdcall:
:tls_ldcall:
The patch also adds a new test to verify fixups and relocations,
and removes the (already unused) FK_390_PLT16DBL/FK_390_PLT32DBL
fixup kinds.
llvm-svn: 229652
For #pragma comment(linker, ...) MSVC expects the comment string to be quoted, but for #pragma comment(lib, ...) the compiler itself quotes the library name.
Since this distinction disappears by the time the directive reaches the backend, move quoting for the "lib" version to the frontend.
Differential Revision: http://reviews.llvm.org/D7652
llvm-svn: 229375
Summary:
Made the following changes:
Added calls to emitDirectiveSetNoAt() and emitDirectiveSetAt().
Added special emit function for .set at=$reg, emitDirectiveSetAtWithArg(unsigned RegNo).
Improved parsing error checks for .set at.
Refactored parser code for .set at.
Improved testing of both directives.
Improved code readability and comments.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7176
llvm-svn: 229097
regressions for LLDB on Linux. Rafael indicated on lldb-dev that we
should just go ahead and revert these but that he wasn't at a computer.
The patches backed out are as follows:
r228980: Add support for having multiple sections with the name and ...
r228889: Invert the section relocation map.
r228888: Use the existing SymbolTableIndex intsead of doing a lookup.
r228886: Create the Section -> Rel Section map when it is first needed.
These patches look pretty nice to me, so hoping its not too hard to get
them re-instated. =D
llvm-svn: 229080
Using this in combination with -ffunction-sections allows LLVM to output a .o
file with mulitple sections named .text. This saves space by avoiding long
unique names of the form .text.<C++ mangled name>.
llvm-svn: 228980
The changes in r223113 (ARM modified-immediate syntax) have broken
instructions like:
mov r0, #~0xffffff00
The problem is that I've added a spurious range check on the immediate
operand to ensure that it lies between INT32_MIN and UINT32_MAX. While
this range check is correct in theory, it causes problems because the
operand is stored in an int64_t (by MC). So valid 32-bit constants like
\#~0xffffff00 become out of range. The solution is to simply remove this
range check. It is not possible to validate the range of the immediate
operand with the current setup because: 1) The operand is stored in an
int64_t by MC, 2) The immediate can be of the forms #imm, #-imm, #~imm
or even #((~imm)) etc. So we just chop the value to 32 bits and use it.
Also noted that the original range check was note tested by any of the
unit tests. I've added a new test to cover #~imm kind of operands.
Change-Id: I411e90d84312a2eff01b732bb238af536c4a7599
llvm-svn: 228920
Summary:
Currently we have Mips32 and Mips64 disassemblers and this causes the target
triple to affect the disassembly despite all the relevant information being in
the ELF header. These implementations do not need to be separate.
This patch merges them together such that the appropriate tables are checked
for the subtarget (e.g. Mips64 is checked when GP64 is enabled).
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7498
llvm-svn: 228825
veqv (vector equivalence)
vnand
vorc
I increased the AddedComplexity for these instructions to 500 to ensure they are generated instead of issuing other VSX instructions.
Phabricator review: http://reviews.llvm.org/D7469
llvm-svn: 228580
COFF section flags are not idempotent:
'rd' will make a read-write section because 'd' implies write
'dr' will make a read-only section because 'r' disables write
llvm-svn: 228490
Patch by Kit Barton.
Add the vector count leading zeros instruction for byte, halfword,
word, and doubleword sizes. This is a fairly straightforward addition
after the changes made for vpopcnt:
1. Add the correct definitions for the various instructions in
PPCInstrAltivec.td
2. Make the CTLZ operation legal on vector types when using P8Altivec
in PPCISelLowering.cpp
Test Plan
Created new test case in test/CodeGen/PowerPC/vec_clz.ll to check the
instructions are being generated when the CTLZ operation is used in
LLVM.
Check the encoding and decoding in test/MC/PowerPC/ppc_encoding_vmx.s
and test/Disassembler/PowerPC/ppc_encoding_vmx.txt respectively.
llvm-svn: 228301
This is a bug that was caused due to storing the feature bitset in a 32-bit
variable when it is a 64-bit mask, discarding the top half of the feature set.
llvm-svn: 228151
The ARM assembler allows register alias redefinitions as long as it
targets the same register. r222319 broke that. In the AArch64 case
it would just produce a new warning, but in the ARM case it would
error out on previously accepted assembler.
llvm-svn: 228109
Patch by Kit Barton.
Add the vector population count instructions for byte, halfword, word,
and doubleword sizes. There are two major changes here:
PPCISelLowering.cpp: Make CTPOP legal for vector types.
PPCRegisterInfo.td: Added v2i64 to the VRRC register
definition. This is needed for the doubleword variations of the
integer ops that were added in P8.
Test Plan
Test the instruction vpcnt* encoding/decoding in ppc64-encoding-vmx.s
Test the generation of the vpopcnt instructions for various vector
data types. When adding the v2i64 type to the Vector Register set, I
also needed to add the appropriate bit conversion patterns between
v2i64 and the existing vector types. Testing for these conversions
were also added in the test case by passing a different vector type as
a parameter into the test functions. There is also a run step that
will ensure the vpopcnt instructions are generated when the vsx
feature is disabled.
llvm-svn: 228046
If the original FPU specification involved a restricted VFP unit (d16), ensure
that we reset the functionality when we encounter a new FPU type. In
particular, if the user specified vfpv3-d16, but switched to a VFPv3 (which has
32 double precision registers), we would fail to reset the D16 feature, and
treat it as being equivalent to vfpv3-d16.
llvm-svn: 227603
The FPU directive permits the user to switch the target FPU, enabling
instructions that would be otherwise unavailable. However, when configuring the
new subtarget features, we would not enable the implied functions for newer
FPUs. This would result in invalid rejection of valid input. Ensure that we
inherit the implied FPU functionality when enabling newer versions of the FPU.
Fortunately, these are mostly hierarchical, unlike the CPUs.
Addresses PR22395.
llvm-svn: 227584
Summary:
This is needed by the .cprestore assembler directive.
This directive needs to be able to insert an LW instruction after every JALR replacement of a JAL pseudo-instruction
(and never after a JALR which has NOT been a result of a pseudo-instruction replacement).
The problem with using InstAlias for these is that after it replaces the pseudo-instruction, we can't find out if the resulting JALR instruction
was generated by an InstAlias or not, so we don't know whether or not to insert our LW instruction.
By replacing it manually, we know when the pseudo-instruction replacement happens and we can insert the LW instruction correctly.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: emaste, llvm-commits
Differential Revision: http://reviews.llvm.org/D5601
llvm-svn: 227568
than on MipsSubtargetInfo.
This required a bit of massaging in the MC level to handle this since
MC is a) largely a collection of disparate classes with no hierarchy,
and b) there's no overarching equivalent to the TargetMachine, instead
only the subtarget via MCSubtargetInfo (which is the base class of
TargetSubtargetInfo).
We're now storing the ABI in both the TargetMachine level and in the
MC level because the AsmParser and the TargetStreamer both need to
know what ABI we have to parse assembly and emit objects. The target
streamer has a pointer to the one in the asm parser and is updated
when the asm parser is created. This is fragile as the FIXME comment
notes, but shouldn't be a problem in practice since we always
create an asm parser before attempting to emit object code via the
assembler. The TargetMachine now contains the ABI so that the DataLayout
can be constructed dependent upon ABI.
All testcases have been updated to use the -target-abi command line
flag so that we can set the ABI without using a subtarget feature.
Should be no change visible externally here.
llvm-svn: 227102
-no-exec-stack. This was due to it not deriving from the correct
asm info base class and missing the override for the exec
stack section query. Added another line to the noexec test
line to make sure this doesn't regress.
llvm-svn: 227074
These tests are asserting and crashing for me, and 'not' sees that as a
non-zero exit code instead of a signal code for obscure Windows reasons.
This causes the test to pass, giving me an unclean 'ninja check'.
The test is already XFAILd, so just run the test without 'not' and let
lit handle the failure.
llvm-svn: 226958
Summary:
We used to silently ignore any empty .module's and we used to give an error saying that we found
an "unexpected token at start of statement" when the value of the option wasn't an identifier (e.g. if it was a number).
We now give an error saying that we "expected .module option identifier" in both of those cases.
I also fixed the other tests in mips-abi-bad.s, which all seemed to be broken.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7095
llvm-svn: 226905
The ELF format is used on Windows by the MCJIT engine. Thus, on Windows, the
ELFObjectWriter can encounter symbols mangled using the MS Visual Studio C++
name mangling. Symbols mangled using the MSVC C++ name mangling can legally
have "@@@" as a substring. The EFLObjectWriter should not interpret the "@@@"
substring as specifying GNU-style symbol versioning. The ELFObjectWriter
therefore check for the MSVC C++ name mangling prefix which is either "?", "@?",
"imp_?" or "imp_?@".
llvm-svn: 226830
Windows supports a restricted set of relocations (compared to ARM ELF). In some
cases, we may end up generating an unsupported relocation. This can occur with
bad input to the assembler in particular (the frontend should never generate
code that cannot be compiled). Generate an error rather than just aborting.
The change in the API is driven by the desire to provide a slightly more helpful
message for debugging purposes.
llvm-svn: 226779
Implement microMIPS 16-bit unconditional branch instruction B.
Implemented 16-bit microMIPS unconditional instruction has real name B16, and
B is an alias which expands to either B16 or BEQ according to the rules:
b 256 --> b16 256 # R_MICROMIPS_PC10_S1
b 12256 --> beq $zero, $zero, 12256 # R_MICROMIPS_PC16_S1
b label --> beq $zero, $zero, label # R_MICROMIPS_PC16_S1
Differential Revision: http://reviews.llvm.org/D3514
llvm-svn: 226657
Implement microMIPS 16-bit unconditional branch instruction B.
Implemented 16-bit microMIPS unconditional instruction has real name B16, and
B is an alias which expands to either B16 or BEQ according to the rules:
b 256 --> b16 256 # R_MICROMIPS_PC10_S1
b 12256 --> beq $zero, $zero, 12256 # R_MICROMIPS_PC16_S1
b label --> beq $zero, $zero, label # R_MICROMIPS_PC16_S1
Differential Revision: http://reviews.llvm.org/D3514
llvm-svn: 226577
This commits adds the octeon branch instructions bbit0/bbit032/bbit1/bbit132.
It also includes patterns for instruction selection and test cases.
Reviewed by D. Sanders
llvm-svn: 226573
The fixes are to note that AArch64 has additional restrictions on when local
relocations can be used. In particular, ld64 requires that relocations to
cstring/cfstrings use linker visible symbols.
Original message:
In an assembly expression like
bar:
.long L0 + 1
the intended semantics is that bar will contain a pointer one byte past L0.
In sections that are merged by content (strings, 4 byte constants, etc), a
single position in the section doesn't give the linker enough information.
For example, it would not be able to tell a relocation must point to the
end of a string, since that would look just like the start of the next.
The solution used in ELF to use relocation with symbols if there is a non-zero
addend.
In MachO before this patch we would just keep all symbols in some sections.
This would miss some cases (only cstrings on x86_64 were implemented) and was
inefficient since most relocations have an addend of 0 and can be represented
without the symbol.
This patch implements the non-zero addend logic for MachO too.
llvm-svn: 226503
An assignment will produce a symbol with a given section and offset. There is
no way to represent something like "1 byte after a common symbol".
This matches the behavior of GNU as.
Part of PR22217.
llvm-svn: 226470
No change in this commit, but clang was changed to also produce trivial comdats when
needed.
Original message:
Don't create new comdats in CodeGen.
This patch stops the implicit creation of comdats during codegen.
Clang now sets the comdat explicitly when it is required. With this patch clang and gcc
now produce the same result in pr19848.
llvm-svn: 226467
The tests for the ISA's should now be approximately diffable. That is, the
output of 'diff valid-mips1.txt valid-mips2.txt' should be emit the lines
for instructions that were added/removed to/from MIPS-I by MIPS-II. This
doesn't work perfectly at the moment due to ordering differences but it
should be close.
llvm-svn: 226408
This reverts commit r226173, adding r226038 back.
No change in this commit, but clang was changed to also produce trivial comdats for
costructors, destructors and vtables when needed.
Original message:
Don't create new comdats in CodeGen.
This patch stops the implicit creation of comdats during codegen.
Clang now sets the comdat explicitly when it is required. With this patch clang and gcc
now produce the same result in pr19848.
llvm-svn: 226242
Fill out our support for the floating-point status and control register
instructions (mcrfs and friends). As it turns out, these are necessary for
compiling src/test/harness_fp.h in TBB for PowerPC.
Thanks to Raf Schietekat for reporting the issue!
llvm-svn: 226070
This commit moves `MDLocation`, finishing off PR21433. There's an
accompanying clang commit for frontend testcases. I'll attach the
testcase upgrade script I used to PR21433 to help out-of-tree
frontends/backends.
This changes the schema for `DebugLoc` and `DILocation` from:
!{i32 3, i32 7, !7, !8}
to:
!MDLocation(line: 3, column: 7, scope: !7, inlinedAt: !8)
Note that empty fields (line/column: 0 and inlinedAt: null) don't get
printed by the assembly writer.
llvm-svn: 226048
This patch stops the implicit creation of comdats during codegen.
Clang now sets the comdat explicitly when it is required. With this patch clang and gcc
now produce the same result in pr19848.
llvm-svn: 226038
The int instruction takes as an operand an 8-bit immediate value. Validate that
the input is valid rather than silently truncating the value.
llvm-svn: 225941
One is that AArch64 has additional restrictions on when local relocations can
be used. We have to take those into consideration when deciding to put a L
symbol in the symbol table or not.
The other is that ld64 requires the relocations to cstring to use linker
visible symbols on AArch64.
Thanks to Michael Zolotukhin for testing this!
Remove doesSectionRequireSymbols.
In an assembly expression like
bar:
.long L0 + 1
the intended semantics is that bar will contain a pointer one byte past L0.
In sections that are merged by content (strings, 4 byte constants, etc), a
single position in the section doesn't give the linker enough information.
For example, it would not be able to tell a relocation must point to the
end of a string, since that would look just like the start of the next.
The solution used in ELF to use relocation with symbols if there is a non-zero
addend.
In MachO before this patch we would just keep all symbols in some sections.
This would miss some cases (only cstrings on x86_64 were implemented) and was
inefficient since most relocations have an addend of 0 and can be represented
without the symbol.
This patch implements the non-zero addend logic for MachO too.
llvm-svn: 225644
This adds support for parsing and emitting the SBREL relocation variant for the
ARM target. Handling this relocation variant is necessary for supporting the
full ARM ELF specification. Addresses PR22128.
llvm-svn: 225595
There is a fair number of relocations that are part of the AAELF specification.
Simply merge the tests into a single test file, otherwise, we will end up with
far too many test files to test each relocation type. NFC.
llvm-svn: 225576
These tests are checking the relocation generation. Use the readobj output as
it is much easier to follow when glancing over the tests.
llvm-svn: 225575
This is equivalent to the AMDGPUTargetMachine now, but it is the
starting point for separating R600 and GCN functionality into separate
targets.
It is recommened that users start using the gcn triple for GCN-based
GPUs, because using the r600 triple for these GPUs will be deprecated in
the future.
llvm-svn: 225277
Requires new AsmParserOperand types that detect 16-bit and 32/64-bit mode so that we choose the right instruction based on default sizing without predicates. This is necessary since predicates mess up the disassembler table building.
llvm-svn: 225256
Tag_compatibility takes two arguments, but before this patch it would
erroneously accept just one, it now produces an error in that case.
Change-Id: I530f918587620d0d5dfebf639944d6083871ef7d
llvm-svn: 225167
Claim conformance to version 2.09 of the ARM ABI.
This build attribute must be emitted first amongst the build attributes when
written to an object file. This is to simplify conformance detection by
consumers.
Change-Id: If9eddcfc416bc9ad6e5cc8cdcb05d0031af7657e
llvm-svn: 225166
Newer POWER cores, and the A2, support the cmpb instruction. This instruction
compares its operands, treating each of the 8 bytes in the GPRs separately,
returning a 'mask' result of 0 (for false) or -1 (for true) in each byte.
Code generation support is added, in the form of a PPCISelDAGToDAG
DAG-preprocessing routine, that recognizes patterns close to what the
instruction computes (either exactly, or related by a constant masking
operation), and generates the cmpb instruction (along with any necessary
constant masking operation). This can be expanded if use cases arise.
llvm-svn: 225106
This is necessary to allow the disassembler to be able to handle AdSize32 instructions in 64-bit mode when address size prefix is used.
Eventually we should probably also support 'addr32' and 'addr16' in the assembler to override the address size on some of these instructions. But for now we'll just use special operand types that will lookup the current mode size to select the right instruction.
llvm-svn: 225075
The issues was that AArch64 has additional restrictions on when local
relocations can be used. We have to take those into consideration when
deciding to put a L symbol in the symbol table or not.
Original message:
Remove doesSectionRequireSymbols.
In an assembly expression like
bar:
.long L0 + 1
the intended semantics is that bar will contain a pointer one byte past L0.
In sections that are merged by content (strings, 4 byte constants, etc), a
single position in the section doesn't give the linker enough information.
For example, it would not be able to tell a relocation must point to the
end of a string, since that would look just like the start of the next.
The solution used in ELF to use relocation with symbols if there is a non-zero
addend.
In MachO before this patch we would just keep all symbols in some sections.
This would miss some cases (only cstrings on x86_64 were implemented) and was
inefficient since most relocations have an addend of 0 and can be represented
without the symbol.
This patch implements the non-zero addend logic for MachO too.
llvm-svn: 225048
If a linker directive is already quoted, don't try to quote it again, otherwise it creates a mess.
This pops up in places like:
#pragma comment(linker,"\"/foo bar'\"")
Differential Revision: http://reviews.llvm.org/D6792
llvm-svn: 224998
Rafael Espindola