Addition of this pass has been botched.
There is no particular reason why it had to be sold as an inseparable part
of new-pm transition. It was added when old-pm was still the default,
and very *very* few users were actually tracking new-pm,
so it's effects weren't measured.
Which means, some of the turnoil of the new-pm transition
are actually likely regressions due to this pass.
Likewise, there has been a number of post-commit feedback
(post new-pm switch), namely
* https://reviews.llvm.org/D37467#2787157 (regresses HW-loops)
* https://reviews.llvm.org/D37467#2787259 (should not be in middle-end, should run after LSR, not before)
* https://reviews.llvm.org/D95789 (an attempt to fix bad loop backedge metadata)
and in the half year past, the pass authors (google) still haven't found time to respond to any of that.
Hereby it is proposed to backout the pass from the pipeline,
until someone who cares about it can address the issues reported,
and properly start the process of adding a new pass into the pipeline,
with proper performance evaluation.
Furthermore, neither google nor facebook reports any perf changes
from this change, so i'm dropping the pass completely.
It can always be re-reverted should/if anyone want to pick it up again.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D104099
Printing pass manager invocations is fairly verbose and not super
useful.
This allows us to remove DebugLogging from pass managers and PassBuilder
since all logging (aside from analysis managers) goes through
instrumentation now.
This has the downside of never being able to print the top level pass
manager via instrumentation, but that seems like a minor downside.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D101797
Retry of 330619a3a6 that includes a clang test update.
Original commit message:
If we run passes before lowering llvm.expect intrinsics to metadata,
then those passes have no way to act on the hints provided by llvm.expect.
SimplifyCFG is the known offender, and we made it smarter about profile
metadata in D98898 <https://reviews.llvm.org/D98898>.
In the motivating example from https://llvm.org/PR49336 , this means we
were ignoring the recommended method for a programmer to tell the compiler
that a compare+branch is expensive. This change appears to solve that case -
the metadata survives to the backend, the compare order is as expected in IR,
and the backend does not do anything to reverse it.
We make the same change to the old pass manager to keep things synchronized.
Differential Revision: https://reviews.llvm.org/D100213
This reverts commit 11b70b9e3a.
The bot failure was due to ArgumentPromotion deleting functions
without deleting their analyses. This was separately fixed in 4b1c807.
This enables use of MemorySSA instead of MemDep in MemCpyOpt. To
allow this without significant compile-time impact, the MemCpyOpt
pass is moved directly before DSE (in the cases where this was not
already the case), which allows us to reuse the existing MemorySSA
analysis.
Unlike the MemDep-based implementation, the MemorySSA-based MemCpyOpt
can also perform simple optimizations across basic blocks.
Differential Revision: https://reviews.llvm.org/D94376
Expanding from D94808 - we ensure the same InlineAdvisor is used by both
InlinerPass instances. The notion of mandatory inlining is moved into
the core InlineAdvisor: advisors anyway have to handle that case, so
this change also factors out that a bit better.
Differential Revision: https://reviews.llvm.org/D94825
(The clang build fails for me locally, so this is based on built bot output and a guess as to root cause.)
f5fe849 made the execution of LAA conditional, so I'm guessing that's the root cause.
Enable performing mandatory inlinings upfront, by reusing the same logic
as the full inliner, instead of the AlwaysInliner. This has the
following benefits:
- reduce code duplication - one inliner codebase
- open the opportunity to help the full inliner by performing additional
function passes after the mandatory inlinings, but before th full
inliner. Performing the mandatory inlinings first simplifies the problem
the full inliner needs to solve: less call sites, more contextualization, and,
depending on the additional function optimization passes run between the
2 inliners, higher accuracy of cost models / decision policies.
Note that this patch does not yet enable much in terms of post-always
inline function optimization.
Differential Revision: https://reviews.llvm.org/D91567
After investigation by @asbirlea, the issue that caused the
revert appears to be an issue in the original source, rather
than a problem with the compiler.
This patch enables MemorySSA DSE again.
This reverts commit 915310bf14.
This is one of the reason for extra invalidations in D84959. In
practice, I don't think we have use cases needing this. This simplifies
the pipeline a bit and prune corner cases when considering
invalidations.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D85676
There appears to be a mis-compile with MemorySSA-backed DSE in
combination with llvm.lifetime.end. It currently appears like
DSE is doing the right thing and the llvm.lifetime.end markers
are incorrect. The reverted patch uncovers the mis-compile.
This patch temporarily switches back to the legacy DSE
implementation, while we investigate.
This reverts commit 9d172c8e9c.
This switches to using DSE + MemorySSA by default again, after
fixing the issues reported after the first commit.
Notable fixes fc82006331, a0017c2bc2.
This reverts commit 3a59628f3c.
The tests have been updated and I plan to move them from the MSSA
directory up.
Some end-to-end tests needed small adjustments. One difference to the
legacy DSE is that legacy DSE also deletes trivially dead instructions
that are unrelated to memory operations. Because MemorySSA-backed DSE
just walks the MemorySSA, we only visit/check memory instructions. But
removing unrelated dead instructions is not really DSE's job and other
passes will clean up.
One noteworthy change is in llvm/test/Transforms/Coroutines/ArgAddr.ll,
but I think this comes down to legacy DSE not handling instructions that
may throw correctly in that case. To cover this with MemorySSA-backed
DSE, we need an update to llvm.coro.begin to treat it's return value to
belong to the same underlying object as the passed pointer.
There are some minor cases MemorySSA-backed DSE currently misses, e.g. related
to atomic operations, but I think those can be implemented after the switch.
This has been discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-August/144417.html
For the MultiSource/SPEC2000/SPEC2006 the number of eliminated stores
goes from ~17500 (legayc DSE) to ~26300 (MemorySSA-backed). More numbers
and details in the thread on llvm-dev.
Impact on CTMark:
```
Legacy Pass Manager
exec instrs size-text
O3 + 0.60% - 0.27%
ReleaseThinLTO + 1.00% - 0.42%
ReleaseLTO-g. + 0.77% - 0.33%
RelThinLTO (link only) + 0.87% - 0.42%
RelLO-g (link only) + 0.78% - 0.33%
```
http://llvm-compile-time-tracker.com/compare.php?from=3f22e96d95c71ded906c67067d75278efb0a2525&to=ae8be4642533ff03803967ee9d7017c0d73b0ee0&stat=instructions
```
New Pass Manager
exec instrs. size-text
O3 + 0.95% - 0.25%
ReleaseThinLTO + 1.34% - 0.41%
ReleaseLTO-g. + 1.71% - 0.35%
RelThinLTO (link only) + 0.96% - 0.41%
RelLO-g (link only) + 2.21% - 0.35%
```
http://195.201.131.214:8000/compare.php?from=3f22e96d95c71ded906c67067d75278efb0a2525&to=ae8be4642533ff03803967ee9d7017c0d73b0ee0&stat=instructions
Reviewed By: asbirlea, xbolva00, nikic
Differential Revision: https://reviews.llvm.org/D87163
As mentioned on D70376, LVI can currently cause performance issues
when running under NewPM. The problem is that, unlike the legacy
pass manager, NewPM will not immediately discard the LVI analysis
if the following pass does not need it. This is a problem, because
LVI has a high memory requirement, and mass invalidation of LVI
values is very inefficient. LVI should only be alive during passes
that actively interact with it.
This patch addresses the issue by explicitly abandoning LVI after CVP,
which gets us back to the LegacyPM behavior.
Differential Revision: https://reviews.llvm.org/D84959
Problem:
Right now, our "Running pass" is not accurate when passes are wrapped in adaptor because adaptor is never skipped and a pass could be skipped. The other problem is that "Running pass" for a adaptor is before any "Running pass" of passes/analyses it depends on. (for example, FunctionToLoopPassAdaptor). So the order of printing is not the actual order.
Solution:
Doing things like PassManager::Debuglogging is very intrusive because we need to specify Debuglogging whenever adaptor is created. (Actually, right now we're not specifying Debuglogging for some sub-PassManagers. Check PassBuilder)
This patch move debug logging for pass as a PassInstrument callback. We could be sure that all running passes are logged and in the correct order.
This could also be used to implement hierarchy pass logging in legacy PM. We could also move logging of pass manager to this if we want.
The test fixes looks messy. It includes changes:
- Remove PassInstrumentationAnalysis
- Remove PassAdaptor
- If a PassAdaptor is for a real pass, the pass is added
- Pass reorder (to the correct order), related to PassAdaptor
- Add missing passes (due to Debuglogging not passed down)
Reviewed By: asbirlea, aeubanks
Differential Revision: https://reviews.llvm.org/D84774
For a long time, the InstCombine pass handled target specific
intrinsics. Having target specific code in general passes was noted as
an area for improvement for a long time.
D81728 moves most target specific code out of the InstCombine pass.
Applying the target specific combinations in an extra pass would
probably result in inferior optimizations compared to the current
fixed-point iteration, therefore the InstCombine pass resorts to newly
introduced functions in the TargetTransformInfo when it encounters
unknown intrinsics.
The patch should not have any effect on generated code (under the
assumption that code never uses intrinsics from a foreign target).
This introduces three new functions:
TargetTransformInfo::instCombineIntrinsic
TargetTransformInfo::simplifyDemandedUseBitsIntrinsic
TargetTransformInfo::simplifyDemandedVectorEltsIntrinsic
A few target specific parts are left in the InstCombine folder, where
it makes sense to share code. The largest left-over part in
InstCombineCalls.cpp is the code shared between arm and aarch64.
This allows to move about 3000 lines out from InstCombine to the targets.
Differential Revision: https://reviews.llvm.org/D81728
Summary:
Analyses that are statefull should not be retrieved through a proxy from
an outer IR unit, as these analyses are only invalidated at the end of
the inner IR unit manager.
This patch disallows getting the outer manager and provides an API to
get a cached analysis through the proxy. If the analysis is not
stateless, the call to getCachedResult will assert.
Reviewers: chandlerc
Subscribers: mehdi_amini, eraman, hiraditya, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72893
I noticed one bot failure due to
24a00ef240 because the wildcard matching
was not working as intended, fixed it to act similar to other checks of
CGSCCToFunctionPassAdaptor.
This restores 2af97be802 (reverted at
6288f86e87), with all the fixes I had
applied at the time, along with a new fix for non-determinism in the
ordering of a couple of passes due to being accessed as parameters on
the same call.
I've also added --dump-input=fail to the new tests so I can more
thoroughly fix any additional failures.
This reverts commit 2af97be802.
After attempting to fix bot failures from matching issues (mostly due to
inconsistent printing of "llvm::" prefixes on objects, and
AnalysisManager objects being printed differntly, I am now seeing some
differences I don't understand (real differences in the passes being
printed). Giving up at this point to allow the bots to recover. Will
revisit later.
Along with the previous fix for bot failures from
2af97be802, need to add a wildcard in a
couple of places where my local output did not print "llvm::" but the
bot is.
Hopefully final bot fix for last few failures from
2af97be802.
Looks like sometimes the "llvm::" preceeding objects get printed in the
debug pass manager output and sometimes they don't. Replace with
wildcard matching.
Additional fixes for bot failures from 2af97be802.
Remove more exact matching on AnalyisManagers, as they can vary.
Also allow different orders between LoopAnalysis and
BranchProbabilityAnalysis as that can vary due to both being accessed in
the parameter list of a call.
Should fix most of the buildbot failures from
2af97be802, by loosening up the matching
on the AnalysisProxy output.
Added in --dump-input=fail on the one test that appears to be something
different, so I can hopefully debug it better.
Summary:
I've added some more extensive ThinLTO pipeline testing with the new PM,
motivated by the bug fixed in D72386.
I beefed up llvm/test/Other/new-pm-pgo.ll a little so that it tests
ThinLTO pre and post link with PGO, similar to the testing for the
default pipelines with PGO.
Added new pre and post link PGO tests for both instrumentation and
sample PGO that exhaustively test the pipelines at different
optimization levels via opt.
Added a clang test to exhaustively test the post link pipeline invoked for
distributed builds. I am currently only testing O2 and O3 since these
are the most important for performance.
It would be nice to add similar exhaustive testing for full LTO, and for
the old PM, but I don't have the bandwidth now and this is a start to
cover some of the situations that are not currently default and were
under tested.
Reviewers: wmi
Subscribers: mehdi_amini, inglorion, hiraditya, steven_wu, dexonsmith, jfb, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D72538
Roman Lebedev