The ORC ObjectLinkingLayer uses this flag during symbol lookup. Failure to set
it causes all symbols to behave as if they were non-exported, which has caused
failures in the kaleidoscope tutorials on Windows. Raising the flag should
un-break the tutorials.
No test case yet - none of the existing command line tools for printing symbol
tables (llvm-nm, llvm-objdump) show the status of this flag, and I don't want to
change the format from these tools without consulting their owners. I'll send an
email to the dev-list to figure out the right way forward.
llvm-svn: 258665
in MachOObjectFile::getSymbolByIndex() when a Mach-O file has
a symbol table load command but the number of symbols are zero.
The code in MachOObjectFile::symbol_begin_impl() should not be
assuming there is a symbol at index 0, in cases there is no symbol
table load command or the count of symbol is zero. So I also fixed
that. And needed to fix MachOObjectFile::symbol_end_impl() to
also do the same thing for no symbol table or one with zero entries.
The code in MachOObjectFile::getSymbolByIndex() should trigger
the report_fatal_error() for programmatic errors for any index when
there is no symbol table load command and not return the end iterator.
So also fixed that. Note there is no test case as this is a programmatic
error.
The test case using the file macho-invalid-bad-symbol-index has
a symbol table load command with its number of symbols (nsyms)
is zero. Which was incorrectly testing the bad triggering of the
report_fatal_error() in in MachOObjectFile::getSymbolByIndex().
This test case is an invalid Mach-O file but not for that reason.
It appears this Mach-O file use to have an nsyms value of 11,
and what makes this Mach-O file invalid is the counts and
indexes into the symbol table of the dynamic load command
are now invalid because the number of symbol table entries
(nsyms) is now zero. Which can be seen with the existing
llvm-obdump:
% llvm-objdump -private-headers macho-invalid-bad-symbol-index
…
Load command 4
cmd LC_SYMTAB
cmdsize 24
symoff 4216
nsyms 0
stroff 4392
strsize 144
Load command 5
cmd LC_DYSYMTAB
cmdsize 80
ilocalsym 0
nlocalsym 8 (past the end of the symbol table)
iextdefsym 8 (greater than the number of symbols)
nextdefsym 2 (past the end of the symbol table)
iundefsym 10 (greater than the number of symbols)
nundefsym 1 (past the end of the symbol table)
...
And the native darwin tools generates an error for this file:
% nm macho-invalid-bad-symbol-index
nm: object: macho-invalid-bad-symbol-index truncated or malformed object (ilocalsym plus nlocalsym in LC_DYSYMTAB load command extends past the end of the symbol table)
I added new checks for the indexes and sizes for these in the
constructor of MachOObjectFile. And added comments for what
would be a proper diagnostic messages.
And changed the test case using macho-invalid-bad-symbol-index
to test for the new error now produced.
Also added a test with a valid Mach-O file with a symbol table
load command where the number of symbols is zero that shows
the report_fatal_error() is not called.
llvm-svn: 258576
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "bad string index" for bad string indexes. Updated the error message
in the llvm-objdump test, and added tests to show llvm-nm prints
"bad string index" and a test to print the actual bad string index value
which in this case is 0xfe000002 when printing the fields as raw hex.
llvm-svn: 258520
but to return object_error::parse_failed. Then made the code in llvm-nm
do for Mach-O files what is done in the darwin native tools which is to
print "(?,?)" or just "s" for bad section indexes. Also added a test to show
it prints the bad section index of "42" when printing the fields as raw hex.
llvm-svn: 258434
Some architecture specific ELF section flags might have the same value
(for example SHF_X86_64_LARGE and SHF_HEX_GPREL) and we have to check
machine architectures to select an appropriate set of possible flags.
The patch selects architecture specific flags into separate arrays
`ElfxxxSectionFlags` and combines `ElfSectionFlags` and `ElfxxxSectionFlags`
before pass to the `StreamWriter::printFlags()` method.
Differential Revision: http://reviews.llvm.org/D16269
llvm-svn: 258334
A request has been made to the official registry, but an official value is
not yet available. This patch uses a temporary value in order to support
development. When an official value is recieved, the value of EM_WEBASSEMBLY
will be updated.
llvm-svn: 257517
We always create archives with just he filename as the member name, but
other archives can put a more complicated path in there.
This patches handles it by computing just the filename as we do when
adding a new member.
If storing the path is important for some reason, we should probably
have an orthogonal option for doing that and do it for both old and new
members.
Fixes pr25877.
llvm-svn: 256001
This patch converts code that has access to a LLVMContext to not take a
diagnostic handler.
This has a few advantages
* It is easier to use a consistent diagnostic handler in a single program.
* Less clutter since we are not passing a handler around.
It does make it a bit awkward to implement some C APIs that return a
diagnostic string. I will propose new versions of these APIs and
deprecate the current ones.
llvm-svn: 255571
There is no real reason the index has to have the concept of an
exporting Module. We should be able to have one single unique
instance of the Index, and it should be read-only after creation
for the whole ThinLTO processing.
The linker plugin should be able to process multiple modules (in
parallel or in sequence) with the same index.
The only reason the ExportingModule was present seems to be to
implement hasExportedFunctions() that is used by the Module linker
to decide what to do with the current Module.
For now I replaced it with a query to the map of Modules path to
see if this module was declared in the Index and consider that if
it is the case then it is probably exporting function.
On the long term the Linker interface needs to evolve and this
call should not be needed anymore.
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 254581
Add a shared helper routine to read the function index from a file
and create/return the function index object. Use it in llvm-link and
llvm-lto.
llvm-svn: 253903
The LLVMContext was only used for Diagnostic. Pass a DiagnosticHandler
instead.
Differential Revision: http://reviews.llvm.org/D14794
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 253540
In `MachOObjectFile::getSymbolType` we currently always return `SymbolRef::ST_Function` for symbols from any section. In order for llvm-symbolizer to correctly symbolize Mach-O globals, symbols from data and BSS sections should return `SymbolRef::ST_Data`.
Differential Revision: http://reviews.llvm.org/D14576
llvm-svn: 252867
The needed lld matching changes to be submitted immediately next,
but this revision will cause lld failures with this alone which is expected.
This removes the eating of the error in Archive::Child::getSize() when the characters
in the size field in the archive header for the member is not a number. To do this we
have all of the needed methods return ErrorOr to push them up until we get out of lib.
Then the tools and can handle the error in whatever way is appropriate for that tool.
So the solution is to plumb all the ErrorOr stuff through everything that touches archives.
This include its iterators as one can create an Archive object but the first or any other
Child object may fail to be created due to a bad size field in its header.
Thanks to Lang Hames on the changes making child_iterator contain an
ErrorOr<Child> instead of a Child and the needed changes to ErrorOr.h to add
operator overloading for * and -> .
We don’t want to use llvm_unreachable() as it calls abort() and is produces a “crash”
and using report_fatal_error() to move the error checking will cause the program to
stop, neither of which are really correct in library code. There are still some uses of
these that should be cleaned up in this library code for other than the size field.
The test cases use archives with text files so one can see the non-digit character,
in this case a ‘%’, in the size field.
These changes will require corresponding changes to the lld project. That will be
committed immediately after this change. But this revision will cause lld failures
with this alone which is expected.
llvm-svn: 252192
This reverts commit r251837, due to a number of bot failures of the form:
/home/grosser/buildslave/perf-x86_64-penryn-O3-polly-fast/llvm.obj/tools/llvm-link/Release+Asserts/llvm-link.o:llvm-link.cpp:function
loadIndex(llvm::LLVMContext&, llvm::Module const*): error: undefined
reference to
'llvm::object::FunctionIndexObjectFile::create(llvm::MemoryBufferRef,
llvm::LLVMContext&, llvm::Module const*, bool)'
/home/grosser/buildslave/perf-x86_64-penryn-O3-polly-fast/llvm.obj/tools/llvm-link/Release+Asserts/llvm-link.o:llvm-link.cpp:function
loadIndex(llvm::LLVMContext&, llvm::Module const*): error: undefined
reference to 'llvm::object::FunctionIndexObjectFile::takeIndex()'
I'm not sure why these are happening - I added Object to the requred
libraries in tools/llvm-link/LLVMBuild.txt and the LLVM_LINK_COMPONENTS
in tools/llvm-link/CMakeLists.txt. Confirmed for my build that these
symbols come out of libLLVMObject.a. What am I missing?
llvm-svn: 251841
Summary:
Support for necessary linkage changes and symbol renaming during
ThinLTO function importing.
Also includes llvm-link support for manually importing functions
and associated llvm-link based tests.
Note that this does not include support for intelligently importing
metadata, which is currently imported duplicate times. That support will
be in the follow-on patch, and currently is ignored by the tests.
Reviewers: dexonsmith, joker.eph, davidxl
Subscribers: tobiasvk, tejohnson, llvm-commits
Differential Revision: http://reviews.llvm.org/D13515
llvm-svn: 251837
This is a bit ugly, but has a few advantages:
* Archive is now easy to copy since there is no Archive -> Child -> Archive
loop.
* It makes it clear that we already checked for errors when finding the Child
data.
llvm-svn: 251750
Also adds a 'trivial' ELF file. This was generated by assembling
and linking a file with the symbol main which contains a single
return instruction.
llvm-svn: 251096
in the size field in the archive header for the member is not a number. To do this we
have all of the needed methods return ErrorOr to push them up until we get out of lib.
Then the tools and can handle the error in whatever way is appropriate for that tool.
So the solution is to plumb all the ErrorOr stuff through everything that touches archives.
This include its iterators as one can create an Archive object but the first or any other
Child object may fail to be created due to a bad size field in its header.
Thanks to Lang Hames on the changes making child_iterator contain an
ErrorOr<Child> instead of a Child and the needed changes to ErrorOr.h to add
operator overloading for * and -> .
We don’t want to use llvm_unreachable() as it calls abort() and is produces a “crash”
and using report_fatal_error() to move the error checking will cause the program to
stop, neither of which are really correct in library code. There are still some uses of
these that should be cleaned up in this library code for other than the size field.
Also corrected the code where the size gets us to the “at the end of the archive”
which is OK but past the end of the archive will return object_error::parse_failed now.
The test cases use archives with text files so one can see the non-digit character,
in this case a ‘%’, in the size field.
llvm-svn: 250906
ArchiveMemberHeader, suggestion by Rafael Espíndola.
Also The clang-x86-win2008-selfhost bot still does not like the
malformed-machos 00000031.a test, so removing it for now. All
the other bots are fine with it however.
llvm-svn: 250222
that caused aborts. This was because of the characters of the ‘Size’ field in
the archive header did not contain decimal characters.
rdar://22983603
llvm-svn: 250117
Summary:
Previously the relative address flag only affected PDB debug info. Now
both DIContext implementations always expect to be passed virtual
addresses. llvm-symbolizer is now responsible for adding ImageBase to
module offsets when --relative-offset is passed.
Reviewers: zturner
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12883
llvm-svn: 249784
from malformed Mach-O files that caused a crash because of a
section header had a size that extended past the end of the file.
rdar://22983603
llvm-svn: 249768
Summary:
The bitcode format is described in this document:
https://drive.google.com/file/d/0B036uwnWM6RWdnBLakxmeDdOeXc/view
For more info on ThinLTO see:
https://sites.google.com/site/llvmthinlto
The first customer is ThinLTO, however the data structures are designed
and named more generally based on prior feedback. There are a few
comments regarding how certain interfaces are used by ThinLTO, and the
options added here to gold currently have ThinLTO-specific names as the
behavior they provoke is currently ThinLTO-specific.
This patch includes support for generating per-module function indexes,
the combined index file via the gold plugin, and several tests
(more are included with the associated clang patch D11908).
Reviewers: dexonsmith, davidxl, joker.eph
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13107
llvm-svn: 249270
This patch includes a fix for a llvm-readobj test. With this patch,
the tool does no longer print out COFF headers for the short import
file, but that's probably desirable because the header for the short
import file is dummy.
llvm-svn: 246283
COFF short import files are special kind of files that contains only
DLL-exported symbol names. That's different from object files because
it has no data except symbol names.
This change implements a SymbolicFile interface for the short import
files so that symbol names can be accessed through that interface.
llvm-ar is now able to read the file and create symbol table entries
for short import files.
llvm-svn: 246276
While introducing support for MinVersionLoadCommand in llvm-readobj I noticed there's
no API to extract Major/Minor/Update components conveniently. Currently consumers
do the bit twiddling on their own, but this will change from now on.
I'll convert llvm-objdump (and llvm-readobj) in a later commit.
Differential Revision: http://reviews.llvm.org/D12282
Reviewed by: rafael
llvm-svn: 245938
Lang Hames