Summary:
Subregister liveness tracking is not implemented for X86 backend, so
sometimes the whole super register is said to be live, when only a
subregister is really live. That might happen if the def and the use
are located in different MBBs, see added fixup-bw-isnt.mir test.
However, using knowledge of the specific instructions handled by the
bw-fixup-pass we can get more precise liveness information which this
change does.
Reviewers: MatzeB, DavidKreitzer, ab, andrew.w.kaylor, craig.topper
Reviewed By: craig.topper
Subscribers: n.bozhenov, myatsina, llvm-commits, hiraditya
Patch by Andrei Elovikov <andrei.elovikov@intel.com>
Differential Revision: https://reviews.llvm.org/D37559
llvm-svn: 313524
Ideally we'd be able to emit the SUBREG_TO_REG without the explicit register->register move, but we'd need to be sure the producing operation would select something that guaranteed the upper bits were already zeroed.
llvm-svn: 312450
In a future patch, I plan to teach isel to use a small vector move with implicit zeroing of the upper elements when it sees the (insert_subvector zero, X, 0) pattern.
llvm-svn: 312448
This also reverts follow-ups r303292 and r303298.
It broke some Chromium tests under MSan, and apparently also internal
tests at Google.
llvm-svn: 303369
Summary: LiveRangeShrink pass moves instruction right after the definition with the same BB if the instruction and its operands all have more than one use. This pass is inexpensive and guarantees optimal live-range within BB.
Reviewers: davidxl, wmi, hfinkel, MatzeB, andreadb
Reviewed By: MatzeB, andreadb
Subscribers: hiraditya, jyknight, sanjoy, skatkov, gberry, jholewinski, qcolombet, javed.absar, krytarowski, atrick, spatel, RKSimon, andreadb, MatzeB, mehdi_amini, mgorny, efriedma, davide, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D32563
llvm-svn: 302938
It can be costly to transfer from the gprs to the xmm registers and can prevent loads merging.
This patch splits vXi16/vXi32/vXi64 BUILD_VECTORS that use the same operand in multiple elements into a BUILD_VECTOR with only a single insertion of each of those elements and then performs an unary shuffle to duplicate the values.
There are a couple of minor regressions this patch unearths due to some missing MOVDDUP/BROADCAST folds that I will address in a future patch.
Note: Now that vector shuffle lowering and combining is pretty good we should be reusing that instead of duplicating so much in LowerBUILD_VECTOR - this is the first of several patches to address this.
Differential Revision: https://reviews.llvm.org/D31373
llvm-svn: 299387
I noticed unnecessary 'sbb' instructions in D30472 and while looking at 'ptest' codegen recently.
This happens because we were transforming any 'setb' - even when we only wanted a single-bit result.
This patch moves those transforms under visitAdd/visitSub, so we we're only creating sbb/adc when it
is a win. I don't know why we need a SETCC_CARRY node type, but I'm not proposing to change that
existing behavior in this patch.
Also, I'm skeptical that sbb/adc are a win for all micro-arches, so I added comments to the test files
where this transform still fires.
The test changes here are all cases where we no longer produce sbb/adc. Avoiding partial register
stalls (generating an xor to clear a register) is not handled in some cases, but that's a separate
issue.
Differential Revision: https://reviews.llvm.org/D30611
llvm-svn: 297586
-Don't print the 'x' suffix for the 128-bit reg/mem VEX encoded instructions in Intel syntax. This is consistent with the EVEX versions.
-Don't print the 'y' suffix for the 256-bit reg/reg VEX encoded instructions in Intel or AT&T syntax. This is consistent with the EVEX versions.
-Allow the 'x' and 'y' suffixes to be used for the reg/mem forms when we're assembling using Intel syntax.
-Allow the 'x' and 'y' suffixes on the reg/reg EVEX encoded instructions in Intel or AT&T syntax. This is consistent with what VEX was already allowing.
This should fix at least some of PR28850.
llvm-svn: 286787
If the input vector to INSERT_SUBVECTOR is another INSERT_SUBVECTOR, and this inserted subvector replaces the last insertion, then insert into the common source vector.
i.e.
INSERT_SUBVECTOR( INSERT_SUBVECTOR( Vec, SubOld, Idx ), SubNew, Idx ) --> INSERT_SUBVECTOR( Vec, SubNew, Idx )
Differential Revision: https://reviews.llvm.org/D23330
llvm-svn: 278211
As reported on PR26235, we don't currently make use of the VBROADCASTF128/VBROADCASTI128 instructions (or the AVX512 equivalents) to load+splat a 128-bit vector to both lanes of a 256-bit vector.
This patch enables lowering from subvector insertion/concatenation patterns and auto-upgrades the llvm.x86.avx.vbroadcastf128.pd.256 / llvm.x86.avx.vbroadcastf128.ps.256 intrinsics to match.
We could possibly investigate using VBROADCASTF128/VBROADCASTI128 to load repeated constants as well (similar to how we already do for scalar broadcasts).
Reapplied with fix for PR28657 - removed intrinsic definitions (clang companion patch to be be submitted shortly).
Differential Revision: https://reviews.llvm.org/D22460
llvm-svn: 276416
D20859 and D20860 attempted to replace the SSE (V)CVTTPS2DQ and VCVTTPD2DQ truncating conversions with generic IR instead.
It turns out that the behaviour of these intrinsics is different enough from generic IR that this will cause problems, INF/NAN/out of range values are guaranteed to result in a 0x80000000 value - which plays havoc with constant folding which converts them to either zero or UNDEF. This is also an issue with the scalar implementations (which were already generic IR and what I was trying to match).
This patch changes both scalar and packed versions back to using x86-specific builtins.
It also deals with the other scalar conversion cases that are runtime rounding mode dependent and can have similar issues with constant folding.
A companion clang patch is at D22105
Differential Revision: https://reviews.llvm.org/D22106
llvm-svn: 275981
An identity COPY like this:
%AL = COPY %AL, %EAX<imp-def>
has no semantic effect, but encodes liveness information: Further users
of %EAX only depend on this instruction even though it does not define
the full register.
Replace the COPY with a KILL instruction in those cases to maintain this
liveness information. (This reverts a small part of r238588 but this
time adds a comment explaining why a KILL instruction is useful).
llvm-svn: 274952
xorl + setcc is generally the preferred sequence due to the partial register
stall setcc + movzbl suffers from. As a bonus, it also encodes one byte smaller.
This fixes PR28146.
The original commit tried inserting an 8bit-subreg into a GR32 (not GR32_ABCD)
which was not appreciated by fast regalloc on 32-bit.
llvm-svn: 274802
xorl + setcc is generally the preferred sequence due to the partial register
stall setcc + movzbl suffers from. As a bonus, it also encodes one byte smaller.
This fixes PR28146.
Differential Revision: http://reviews.llvm.org/D21774
llvm-svn: 274692
We can now handle concatenation of each source multiple times. The previous code just checked for each source to appear once in either order.
This also now handles an entire source vector sized piece having undef indices correctly. We now concat with UNDEF instead of using one of the sources. This is responsible for the test case change.
llvm-svn: 274483
This patch allows target shuffles to be combined to single input immediate permute instructions - (V)PSHUFD/VPERMILPD/VPERMILPS - allowing more general pattern matching than what we current do and improves the likelihood of memory folding compared to existing patterns which tend to reuse the input in multiple arguments.
Further permute instructions (V)PSHUFLW/(V)PSHUFHW/(V)PERMQ/(V)PERMPD may be added in the future but its proven tricky to create tests cases for them so far. (V)PSHUFLW/(V)PSHUFHW is already handled quite well in combineTargetShuffle so it may be that removing some of that code may allow us to perform more of the combining in one place without duplication.
Differential Revision: http://reviews.llvm.org/D21148
llvm-svn: 273999
This patch removes the llvm intrinsics (V)CVTTPS2DQ and VCVTTPD2DQ truncation (round to zero) conversions and auto-upgrades to FP_TO_SINT calls instead.
Note: I looked at updating CVTTPD2DQ as well but this still requires a lot more work to correctly lower.
Differential Revision: http://reviews.llvm.org/D20860
llvm-svn: 271510
This isn't the complete fix, but it handles the trivial examples of duplicate vzero* ops in PR27823:
https://llvm.org/bugs/show_bug.cgi?id=27823
...and amusingly, the bogus cases already exist as regression tests, so let's take this baby step.
We'll need to do more in the general case where there's legitimate AVX usage in the function + there's
already a vzero in the code.
Differential Revision: http://reviews.llvm.org/D20477
llvm-svn: 270378
Fixed a bug introduced by D16683 when a binary shuffle is simplified to a unary shuffle (with undef/zero sentinel mask indices) - if this resulted in only the second input being used combineX86ShuffleChain failed to take this into account and still referenced the first input.
llvm-svn: 261434
As discussed on PR24580, this patch adds some (more to come) initial fast-isel codegen tests to match the IR generated in clang/test/CodeGen/avx-builtins.c
llvm-svn: 261329
Nikolai Bozhenov