This should more accurately reflect what the AsmPrinter will actually
do.
This is NFC, as far as I can tell; all the places that might be affected
already have an extra check to avoid using the result of
getPreferredAlignment in this situation.
Differential Revision: https://reviews.llvm.org/D51377
llvm-svn: 340999
This is a recommit of r333506, which was reverted in r333518.
The original commit message is below.
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 334344
This is a recommit of r333390, which was reverted in r333395, because it
caused cyclic dependency when building shared library `LLVMDemangle.so`.
In this commit `ItaniumDemangler.cpp` was not changed.
The original commit message is below.
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 333506
In r325551 many calls of malloc/calloc/realloc were replaces with calls of
their safe counterparts defined in the namespace llvm. There functions
generate crash if memory cannot be allocated, such behavior facilitates
handling of out of memory errors on Windows.
If the result of *alloc function were checked for success, the function was
not replaced with the safe variant. In these cases the calling function made
the error handling, like:
T *NewElts = static_cast<T*>(malloc(NewCapacity*sizeof(T)));
if (NewElts == nullptr)
report_bad_alloc_error("Allocation of SmallVector element failed.");
Actually knowledge about the function where OOM occurred is useless. Moreover
having a single entry point for OOM handling is convenient for investigation
of memory problems. This change removes custom OOM errors handling and
replaces them with calls to functions `llvm::safe_*alloc`.
Declarations of `safe_*alloc` are moved to a separate include file, to avoid
cyclic dependency in SmallVector.h
Differential Revision: https://reviews.llvm.org/D47440
llvm-svn: 333390
Summary:
This adds initial support for letting targets specify which address
spaces their functions should reside in by default.
If a function is created by a frontend, it will get the default address space specified in the DataLayout, unless the frontend explicitly uses a more general `llvm::Function` constructor. Function address spaces will become a part of the bitcode and textual IR forms, as we do not have access to a data layout whilst parsing LL.
It will be possible to write IR that explicitly has `addrspace(n)` on a function. In this case, the function will reside in the specified space, ignoring the default in the DL.
This is the first step towards placing functions into the correct
address space for Harvard architectures.
Full patchset
* Add program address space to data layout D37052
* Require address space to be specified when creating functions D37054
* [clang] Require address space to be specified when creating functions D37057
Reviewers: pcc, arsenm, kparzysz, hfinkel, theraven
Reviewed By: theraven
Subscribers: arichardson, simoncook, rengolin, wdng, uabelho, bjope, asb, llvm-commits
Differential Revision: https://reviews.llvm.org/D37052
llvm-svn: 325479
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
llvm-svn: 325102
As a follow up of the bad alloc handler patch, this patch introduces nullptr checks on pointers returned from the
malloc/realloc/calloc functions. In addition some memory size assignments are moved behind the allocation
of the corresponding memory to fulfill exception safe memory management (RAII).
patch by Klaus Kretzschmar
Differential Revision: https://reviews.llvm.org/D35414
llvm-svn: 308576
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
Currently we use getTypeSizeInBits which contains a switch statement to dispatch based on what the Type is. We know we always have a pointer type here, but the compiler isn't able to figure out that out to remove the switch.
This patch changes it to just call handle the pointer type directly by calling getPointerSizeInBits without going through a switch.
getPointerTypeSizeInBits is called pretty often, particularly by getOrEnforceKnownAlignment which is used by InstCombine. This should speed that up a little bit.
Differential Revision: https://reviews.llvm.org/D31841
llvm-svn: 300475
LLVM makes several assumptions about address space 0. However,
alloca is presently constrained to always return this address space.
There's no real way to avoid using alloca, so without this
there is no way to opt out of these assumptions.
The problematic assumptions include:
- That the pointer size used for the stack is the same size as
the code size pointer, which is also the maximum sized pointer.
- That 0 is an invalid, non-dereferencable pointer value.
These are problems for AMDGPU because alloca is used to
implement the private address space, which uses a 32-bit
index as the pointer value. Other pointers are 64-bit
and behave more like LLVM's notion of generic address
space. By changing the address space used for allocas,
we can change our generic pointer type to be LLVM's generic
pointer type which does have similar properties.
llvm-svn: 299888
Summary:
We currently do a linear scan through all of the Alignments array entries anytime getAlignmentInfo is called. I noticed while profiling compile time on a -O2 opt run that this function can be called quite frequently and was showing about as about 1% of the time in callgrind.
This patch puts the Alignments array into a sorted order by type and then by bitwidth. We can then do a binary search. And use the sorted nature to handle the special cases for INTEGER_ALIGN. Some of this is modeled after the sorting/searching we do for pointers already.
This reduced the time spent in this routine by about 2/3 in the one compilation I was looking at.
We could maybe improve this more by using a DenseMap to cache the results, but just sorting was easy and didn't require extra data structure. And I think it made the integer handling simpler.
Reviewers: sanjoy, davide, majnemer, resistor, arsenm, mehdi_amini
Reviewed By: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D31232
llvm-svn: 298579
I don't think validAlignment has been used since r34358 in 2007. I think validPointer was copied from validAlignment some time later, but it definitely wasn't used in the first commit that contained it.
llvm-svn: 298458
Instead, expose whether the current type is an array or a struct, if an array
what the upper bound is, and if a struct the struct type itself. This is
in preparation for a later change which will make PointerType derive from
Type rather than SequentialType.
Differential Revision: https://reviews.llvm.org/D26594
llvm-svn: 288458
Summary:
This change adds a `ni` specifier in the `datalayout` string to denote
pointers in some given address spaces as "non-integral", and adds some
typing rules around these special pointers.
Reviewers: majnemer, chandlerc, atrick, dberlin, eli.friedman, tstellarAMD, arsenm
Subscribers: arsenm, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D22488
llvm-svn: 277085
For non padded structs, we can just proceed and deaggregate them.
We don't want ot do this when there is padding in the struct as to not
lose information about this padding (the subsequents passes would then
try hard to preserve the padding, which is undesirable).
Also update extractvalue.ll and cast.ll so that they use structs with padding.
Remove the FIXME in the extractvalue of laod case as the non padded case is
handled when processing the load, and we don't want to do it on the padded
case.
Patch by: Amaury SECHET <deadalnix@gmail.com>
Differential Revision: http://reviews.llvm.org/D14483
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 255600
This reverts commit r243135.
Feedback from Craig Topper and David Blaikie was that we don't put const on Type as it has no mutable state.
llvm-svn: 243283
Almost all methods in DataLayout took mutable pointers but didn't need to.
These were only accessing constant methods of the types, or using the Type*
to key a map. Neither of these needs a mutable pointer.
llvm-svn: 243135
COFF COMDATs (for selection kinds other than 'select any') require at
least one non-section symbol in the symbol table.
Satisfy this by morally enhancing the linkage from private to internal.
Differential Revision: http://reviews.llvm.org/D8394
llvm-svn: 232570
Summary:
DataLayout keeps the string used for its creation.
As a side effect it is no longer needed in the Module.
This is "almost" NFC, the string is no longer
canonicalized, you can't rely on two "equals" DataLayout
having the same string returned by getStringRepresentation().
Get rid of DataLayoutPass: the DataLayout is in the Module
The DataLayout is "per-module", let's enforce this by not
duplicating it more than necessary.
One more step toward non-optionality of the DataLayout in the
module.
Make DataLayout Non-Optional in the Module
Module->getDataLayout() will never returns nullptr anymore.
Reviewers: echristo
Subscribers: resistor, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D7992
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 231270
Previously this would result in assertion failures or simply crashes
at various points in the optimizer when trying to create types of zero
bit width.
llvm-svn: 230936
As indicated by the tests, it is possible to feed the AsmParser an
invalid datalayout string. We should verify the result of parsing this
string regardless of whether or not we have assertions enabled.
llvm-svn: 223898
be BigEndian so the default can continue to be zero-initialized.
This is one of the prerequisites to making DataLayout a constant and
always available part of every module.
llvm-svn: 220193
With this a DataLayoutPass can be reused for multiple modules.
Once we have doInitialization/doFinalization, it doesn't seem necessary to pass
a Module to the constructor.
Overall this change seems in line with the idea of making DataLayout a required
part of Module. With it the only way of having a DataLayout used is to add it
to the Module.
llvm-svn: 217548
string_ostream is a safe and efficient string builder that combines opaque
stack storage with a built-in ostream interface.
small_string_ostream<bytes> additionally permits an explicit stack storage size
other than the default 128 bytes to be provided. Beyond that, storage is
transferred to the heap.
This convenient class can be used in most places an
std::string+raw_string_ostream pair or SmallString<>+raw_svector_ostream pair
would previously have been used, in order to guarantee consistent access
without byte truncation.
The patch also converts much of LLVM to use the new facility. These changes
include several probable bug fixes for truncated output, a programming error
that's no longer possible with the new interface.
llvm-svn: 211749
Eli Friedman