Because we use cast<> at the beginning of this function, it will
abort there if a given atom is not a DefinedAtom.
In the switch statement, we checked if a given atom is a DefinedAtom
again by evaluating definition() == Atom::definitionRegular.
This was always true. So we can remove the outer switch statement.
llvm-svn: 219724
Arm code has two instruction encodings "thumb" and "arm". When branching from
one code encoding to another, you need to use an instruction that switches
the instruction mode. Usually the transition only happens at call sites, and
the linker can transform a BL instruction in BLX (or vice versa). But if the
compiler did a tail call optimization and a function ends with a branch (not
branch and link), there is no pc-rel BX instruction.
The ShimPass looks for pc-rel B instructions that will need to switch mode.
For those cases it synthesizes a shim which does the transition, then modifies
the original atom with the B instruction to target to the shim atom.
llvm-svn: 219655
When committed in r219353, this patch originally caused problems because it was
not tested in debug build. In such scenarios, Driver.cpp adds two additional
passes. These passes serialize all atoms via YAML and reads it back. Since the
patch changed ObjectAtom to hold a new reference, the serialization was removing
the extra data.
This commit implements r219853 in another way, similar to the original MIPS way,
by using a StringSet that holds the names of all copied atoms instead of
directly holding a reference to the copied atom. In this way, this commit is
simpler and eliminate the necessity of changing the DefinedAtom hierarchy to
hold a new data.
Reviewers: shankarke
http://reviews.llvm.org/D5713
llvm-svn: 219449
We are going to have another type of jump table for the delay-load
import table. In order to prepare for that, we want to factor out
the function handling the jump table. No functionality change.
llvm-svn: 219446
Previously the field was not set. The field should be pointing to
a placeholder where the DLL delay-loader writes the base address
of a DLL.
llvm-svn: 219415
Previously, LLVM object tools didn't know the true size of the sections.
This would result in tools thinking that a section with a VirtualSize
smaller than FileAlignment would end in zeros when actually those zeros
weren't really part of the section contents.
llvm-svn: 219394
This is a partial patch to emit the delay-import table. With this,
LLD is now able to emit the table that llvm-readobj can read and
dump.
The table lacks a few fields, such as the address of HMODULE, the
import address table, etc. They'll be added in subsequent patches.
llvm-svn: 219384
Enhances the creation of an ELF dynamic executable by avoiding recording
unnecessary shared libraries as NEEDED to load a program.
To do this, we must keep track of not only symbols that were referenced but
also of COPY relocations, which steal the symbol from a shared library but does
not store from which lib this symbol came from. To fix this, this commit changes
ObjectSymbol to store the original library from which this symbol came. With
this information, we are able to build a list of the exact shared libraries that
must be marked as DT_NEEDED, instead of blindly marking all shared libraries as
needed.
This logic originally came from the MIPS backend with some adaptation.
Reviewers: atanasyan, shankar.easwaran
http://reviews.llvm.org/D5574
llvm-svn: 219353
Updates the remaining tasks in the X86_64 ELF lld backend after the commit that
handles general dynamic TLS relocations.
Reviewer: shankarke
http://reviews.llvm.org/D5673
llvm-svn: 219350
This commit implements in the X86_64 ELF lld backend yet another feature that
was only available in the MIPS backend. However, this patch changes generic ELF
classes to make it trivial for other ELF backends to use this logic too. When
creating a dynamic executable that has dynamic relocations against weak
undefined symbols, these symbols must be exported to the dynamic symbol table
to seek a possible resolution at run time.
A common use case is the __gmon_start__ weak glibc undefined symbol.
Reviewer: shankarke
http://reviews.llvm.org/D5571
llvm-svn: 219349
When creating a dynamic executable and receiving the -E flag, the linker should
export all globally visible symbols in its dynamic symbol table.
This commit also moves the logic that exports symbols in the dynamic symbol
table from OutputELFWriter to the ExecutableWriter class. It is not correct to
leave this at OutputELFWriter because DynamicLibraryWriter, another subclass of
OutputELFWriter, already exports all symbols, meaning we can potentially end up
with duplicated symbols in the dynamic symbol table when creating shared libs.
Reviewers: shankarke
http://reviews.llvm.org/D5585
llvm-svn: 219334
Summary: Add support in the universal driver to print the lld version and the
repository version.
Test Plan: A driver test is added
Reviewers: kledzik, ruiu
Reviewed By: ruiu
Subscribers: llvm-commits
Projects: #lld
Differential Revision: http://reviews.llvm.org/D5641
llvm-svn: 219277
mach-o supports "fat" files which are a header/table-of-contents followed by a
concatenation of mach-o files (or archives of mach-o files) built for
different architectures. Previously, the support for fat files was in the
MachOReader, but that only supported fat .o files and dylibs (not archives).
The fix is to put the fat handing into MachOFileNode. That way any input file
kind (including archives) can be fat. MachOFileNode selects the sub-range
of the fat file that matches the arch being linked and creates a MemoryBuffer
for just that subrange.
llvm-svn: 219268
Teach the reader about ARM NT relocation types. Although the writer cannot yet
perform the actual application of these relocations, the reader can at least now
identify the relocation types.
llvm-svn: 219178
Previously, we would not check the target machine type and the module (object)
machine type. Add a check to ensure that we do not attempt to use an object
file with a different target architecture.
This change identified a couple of tests which were incorrectly mixing up
architecture types, using x86 input for a x64 target. Adjust the tests
appropriately. The renaming of the input and the architectures covers the
changes to the existing tests.
One significant change to the existing tests is that the newly added test input
for x64 uses the correct user label prefix for X64.
llvm-svn: 219093
Rather than a series of cascading ifs, use a switch statement to convert the
error code to a string. This has the benefit of allowing the compiler to inform
us if we ever add a new error code but fail to update the string representation.
Add in stringified versions for a couple of missing InputGraphErrors.
llvm-svn: 219089
In order to support more than x86/x86_64, we need to change the behaviour to use
the actual machine type rather than checking the bitness and assuming that we
are on X86. This replaces the use of is64bit in applyAllRelocations with a
check on the machine type. This will enable adding support for handling ARM
relocations.
Rename the existing applyRelocation methods to be similarly named and to make it
clear the types of relocations they will process.
llvm-svn: 219088
This option is added by Xcode when it runs the linker. It produces a binary
file which contains the file the linker used. Xcode uses the info to
dynamically update it dependency tracking.
To check the content of the binary file, the test case uses a python script
to dump the binary file as text which FileCheck can check.
llvm-svn: 219039
When creating the graph edges of the atoms of an ELF file, special care must be
taken with atoms that represent weak symbols. They cannot be the target of any
Reference::kindLayoutAfter edge because they can be merged and point to other
code, screwing up the final layout of the atoms. ELFFile::createAtoms()
correctly handles this corner case. The problem is that createAtoms() assumed
that there can be no zero-sized weak symbols, which is not true. Consider:
my_weak_func1:
my_weak_func2:
my_weak_func3:
code
In this case, we have two zero-sized weak symbols, my_weak_func1 and
my_weak_func2, and one non-zero weak symbol my_weak_func3. createAtoms() would
correctly handle my_weak_func3, but not the first two symbols. This problem
happens in the musl C library when a zero-sized weak symbol is merged and
screws up the file layout. Since this musl code lives at the finalization hooks,
any C program linked with LLD and musl was correctly executing, but segfaulting
at the end.
Reviewers: shankarke
http://reviews.llvm.org/D5606
llvm-svn: 219034
DLL delay importing is a feature to load a DLL lazily, instead of
at program start-up time.
If the feature is turned on with the /delayload flag, the linker
resolves the delay-load helper function. All function pointer table
entries for the DLL are initially pointing to the helper function.
When called, the function loads and resolves the DLL symbols using
dlopen-ish Windows system calls and then write the reuslts to the
function pointer table. The helper function is in "delayimp.lib".
Note that this feature is not completely implemented yet. LLD
also needs to emit the table that's consumed by the delay-load
helper function. That'll be done in another patch.
llvm-svn: 218943
The mergeByContent attribute on DefinedAtoms triggers the symbol table to
coalesce atoms with the exact same content. The problem is that atoms can also
have a required custom section. The coalescing should never change the custom
section of an atom.
The fix is to only consider to atoms to have the same content if their
sectionChoice() and customSectionName() attributes match.
llvm-svn: 218893
This patch adds logic to avoid putting the dynamic linker library (ld.so) as a
DT_NEEDED entry in the dynamic table. It should only appear in PT_INTERP.
This patch fixes SPEC programs 433, 445, 450, 453, 456, 462 when running on
Ubuntu Linux x86_64 and when linking SPEC programs with LLD and glibc 2.19.
http://reviews.llvm.org/D5573
llvm-svn: 218847
Summary: With r218633, the logic that monitors which shared library symbols were used was copied from the MIPS lld backend to ELF classes, making it available to all ELF backends. However, this made the isDynSymEntryRequired() functions in MipsDynamicLibraryWriter.h/MipsELFWriters.h/MipsExecutableWriter.h to be duplicated logic, since this is already implemented in OutputELFWriter<>/DefaultLayout. This patch removes this duplicated code from MIPS.
Reviewers: Bigcheese, shankarke
Reviewed By: shankarke
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5564
llvm-svn: 218846
No functionality change. This removes a down-cast from LinkingContext to
MachOLinkingContext.
Also, remove const from LinkingContext::createImplicitFiles() to remove
the need for another const cast. Seems reasonable for createImplicitFiles()
to need to modify the context (MachOLinkingContext does).
llvm-svn: 218796
The darwin linker has the -demangle option which directs it to demangle C++
(and soon Swift) mangled symbol names. Long term we need some Diagnostics object
for formatting errors and warnings. But for now we have the Core linker just
writing messages to llvm::errs(). So, to enable demangling, I changed the
Resolver to call a LinkingContext method on the symbol name.
To make this more interesting, the demangling code is done via __cxa_demangle()
which is part of the C++ ABI, which is only supported on some platforms, so I
had to conditionalize the code with the config generated HAVE_CXXABI_H.
llvm-svn: 218718
This is yet another edge case of ambiguous name resolution.
When a symbol is specified with /entry:SYM, SYM may be resolved
to the C++ mangled function name (?SYM@@YAXXZ).
llvm-svn: 218706
Rui Ueyama