Just above, 'op2' is stated to be unsigned, so 'negative' doesn't make
sense (and is handled by "larger than" anyway). The descriptions for
lshr and ashr don't say 'negative or' either.
llvm-svn: 235230
This commit removes `DebugLocList` and replaces it with
`DebugLocStream`.
- `DebugLocEntry` no longer contains its byte/comment streams.
- The `DebugLocEntry` list for a variable/inlined-at pair is allocated
on the stack, and released right after `DebugLocEntry::finalize()`
(possible because of the refactoring in r231023). Now, only one
list is in memory at a time now.
- There's a single unified stream for the `.debug_loc` section that
persists, stored in the new `DebugLocStream` data structure.
The last point is important: this collapses the nested `SmallVector<>`s
from `DebugLocList` into unified streams. We previously had something
like the following:
vec<tuple<Label, CU,
vec<tuple<BeginSym, EndSym,
vec<Value>,
vec<char>,
vec<string>>>>>
A `SmallVector` can avoid allocations, but is statically fairly large
for a vector: three pointers plus the size of the small storage, which
is the number of elements in small mode times the element size).
Nesting these is expensive, since an inner vector's size contributes to
the element size of an outer one. (Nesting any vector is expensive...)
In the old data structure, the outer vector's *element* size was 632B,
excluding allocation costs for when the middle and inner vectors
exceeded their small sizes. 312B of this was for the "three" pointers
in the vector-tree beneath it. If you assume 1M functions with an
average of 10 variable/inlined-at pairs each (in an LTO scenario),
that's almost 6GB (besides inner allocations), with almost 3GB for the
"three" pointers.
This came up in a heap profile a little while ago of a `clang -flto -g`
bootstrap, with `DwarfDebug::collectVariableInfo()` using something like
10-15% of the total memory.
With this commit, we have:
tuple<vec<tuple<Label, CU, Offset>>,
vec<tuple<BeginSym, EndSym, Offset, Offset>>,
vec<char>,
vec<string>>
The offsets are used to create `ArrayRef` slices of adjacent
`SmallVector`s. This reduces the number of vectors to four (unrelated
to the number of variable/inlined-at pairs), and caps the number of
allocations at the same number.
Besides saving memory and limiting allocations, this is NFC.
I don't know my way around this code very well yet, but I wonder if we
could go further: why stream to a side-table, instead of directly to the
output stream?
llvm-svn: 235229
Similar to r235222, but for the weak symbol case.
In an "ideal" assembler/object format an expression would always refer to the
final value and A-B would only be computed from a section in the same
comdat as A and B with A and B strong.
Unfortunately that is not the case with debug info on ELF, so we need an
heuristic. Since we need an heuristic, we may as well use the same one as
gas:
* call weak_sym : produces a relocation, even if in the same section.
* A - weak_sym and weak_sym -A: don't produce a relocation if we can
compute it.
This fixes pr23272 and changes the fix of pr22815 to match what gas does.
llvm-svn: 235227
CatchHigh may be smaller than TryHigh if we reuse an outlined catch
handler for two different invokes with different EH states. We have no
evidence which shows that CatchHigh must be greater than TryHigh or
TryLow. We can revisit this if we turn out to be wrong.
llvm-svn: 235223
Part of pr23272.
A small annoyance with the assembly syntax we implement is that given an
expression there is no way to know if what is desired is the value of that
expression for the symbols in this file or for the final values of those
symbols in a link.
The first case is useful for use in sections that get discarded or ignored
if the section they are describing is discarded.
For axample, consider A-B where A and B are in the same comdat section.
We can compute the value of the difference in the section that is present in
the current .o and if that section survives to the final DSO the value will
still will be correct.
But the section is in a comdat. Another section from another object file
might be used istead. We know that that section will define A and B, but
we have no idea what the value of A-B might be.
In practice we have to assume that the intention is to compute the value
in the current section since otherwise the is no way to create something like
the debug aranges section.
llvm-svn: 235222
Now (with a few carefully placed suppressions relating to general type
serialization, etc) we can round trip a simple load through bitcode and
textual IR without calling getElementType on a PointerType.
llvm-svn: 235221
Summary:
- Handle TypePromoteFloat in switch statements
- Move an expression into an assert to avoid unused variable in
non-assert builds.
Reviewers: srhines, ab
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9086
llvm-svn: 235220
Summary:
This patch adds legalization support to operate on FP16 as a load/store type
and do operations on it as floats.
Tests for ARM are added to test/CodeGen/ARM/fp16-promote.ll
Reviewers: srhines, t.p.northover
Differential Revision: http://reviews.llvm.org/D8755
llvm-svn: 235215
Summary: Caused a failure because it showed up as `__printf`.
Reviewers: ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9060
llvm-svn: 235214
Summary: Implement the method FastMaterializeAlloca in Mips fast-isel
Based on a patch by Reed Kotler.
Test Plan:
Passes test-suite at O0/O2 for mips32 r1/r2
fastalloca.ll
Reviewers: dsanders, rkotler
Subscribers: rfuhler, llvm-commits
Differential Revision: http://reviews.llvm.org/D6742
llvm-svn: 235213
Catch blocks which are empty may be in the same state as their try
blocks. It is not meaningful to give the catch block its own state
number in this case because it can't do anything exceptional.
llvm-svn: 235212
When debugging LTO issues with ld64, we use -save-temps to save the merged
optimized bitcode file, then invoke ld64 again on the single bitcode file.
The saved bitcode file is already internalized, so we can call
lto_codegen_set_should_internalize and skip running internalization again.
rdar://20227235
llvm-svn: 235211
Stop storing the `MDLocalVariable` in the `DebugLocEntry::Value`s. We
generate the list of `DebugLocEntry`s separately for each
variable/inlined-at pair, so the variable never actually changes here.
This is effectively NFC (aside from saving some memory and CPU time).
llvm-svn: 235202
We can calculate the variable type up front before calling
`DebugLocEntry::finalize()`. In fact, since we only care about the type
if it's an `MDBasicType`, don't even bother resolving it using the type
identifier map.
llvm-svn: 235201
The v1i128 type is needed for the quadword add/substract instructions introduced
in POWER8. Futhermore, the PowerPC ABI specifies that parameters of type v1i128
are to be passed in a single vector register, while parameters of type i128 are
passed in pairs of GPRs. Thus, it is necessary to be able to differentiate
between v1i128 and i128 in LLVM.
http://reviews.llvm.org/D8564
llvm-svn: 235198
The i128 type is needed as a builtin type in order to support the v1i128 vector
type. The PowerPC ABI requires that the i128 and v1i128 types are handled
differently when passed as parameters to functions (i128 is passed in pairs of
GPRs, v1i128 is passed in a single vector register).
http://reviews.llvm.org/D8564
llvm-svn: 235196
Summary:
This command is currently processed using expression evaluation, meaning the variable binds to the result of the expression not the register.
Therefore any subsequent calls to '-var-assign' will not update the register. Fixed by detecting '$' prefix for registers according to specification.
Thanks, Ewan
Patch from ewan@codeplay.com
Reviewers: EwanCrawford
Subscribers: lldb-commits, deepak2427
Differential Revision: http://reviews.llvm.org/D8965
llvm-svn: 235195
Summary:
Add shift operators implementation to fast-isel for Mips. These are shift ops
for non legal forms, i.e. i8 and i16.
Based on a patch by Reed Kotler.
Test Plan:
Reviewers: dsanders
Subscribers: echristo, rfuhler, llvm-commits
Differential Revision: http://reviews.llvm.org/D6726
llvm-svn: 235194
Summary:
This is the first phase of the merging of Monitor and Operation threads in NativeProcessLinux
(which is necessary since the two threads race inside Linux kernel). Here, I reimplement the
Monitor thread do use non-blocking waitpid calls, which enables later addition of code from the
operation thread.
Test Plan: Ran the test suite a couple of times, no regressions detected.
Reviewers: vharron, ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D9048
llvm-svn: 235193
The number of strings is so small that performance doesn't matter and adding
the thread safe static initialization and destruction overhead is just not
worth it. No functional change intended.
llvm-svn: 235192
This is a followon to r233681 - I'd misunderstood the semantics of FTRUNC,
and had confused it with (FP_ROUND ..., 0).
Thanks for Ahmed Bougacha for his post-commit review!
llvm-svn: 235191
In public MS headers for XAudio, clang would fail to generate a valid UUID due to the UUID components being combined with the '-' UUID separators. Clang would attempting to recover but would preserve the leading whitespace from the tokens after each failed paste leading to spaces creeping into the UUID and causing an error in the __declspace(uuid()) parsing.
Reference: Microsoft DirectX SDK (June 2010)\Include\XAudio2.h(51)
Resolves http://llvm.org/pr23071
llvm-svn: 235186
Summary:
Previously, the presence of KILL instructions would block valid candidates
from filling a specific delay slot. With the elimination of the KILL
instructions, in the appropriate range, we are able to fill more slots and
keep the information from future def/use analysis consistent.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: hfinkel, llvm-commits
Differential Revision: http://reviews.llvm.org/D7724
llvm-svn: 235183
Sean Silva