Extend the -fmodule-file option to support the [<name>=]<file> value format.
If the name is omitted, then the old semantics is preserved (the module file
is loaded whether needed or not). If the name is specified, then the mapping
is treated as just another prebuilt module search mechanism, similar to
-fprebuilt-module-path, and the module file is only loaded if actually used
(e.g., via import). With one exception: this mapping also overrides module
file references embedded in other modules (which can be useful if module files
are moved/renamed as often happens during remote compilation).
This override semantics requires some extra work: we now store the module name
in addition to the file name in the serialized AST representation.
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D35020
llvm-svn: 312105
When non-modular headers are imported while not building a module but
in -fmodules mode, be conservative and preserve the default #import
semantic: do not reenter headers.
rdar://problem/33745031
llvm-svn: 310605
This patch adds support for a `header` declaration in a module map to specify
certain `stat` information (currently, size and mtime) about that header file.
This has two purposes:
- It removes the need to eagerly `stat` every file referenced by a module map.
Instead, we track a list of unresolved header files with each size / mtime
(actually, for simplicity, we track submodules with such headers), and when
attempting to look up a header file based on a `FileEntry`, we check if there
are any unresolved header directives with that `FileEntry`'s size / mtime and
perform deferred `stat`s if so.
- It permits a preprocessed module to be compiled without the original files
being present on disk. The only reason we used to need those files was to get
the `stat` information in order to do header -> module lookups when using the
module. If we're provided with the `stat` information in the preprocessed
module, we can avoid requiring the files to exist.
Unlike most `header` directives, if a `header` directive with `stat`
information has no corresponding on-disk file the enclosing module is *not*
marked unavailable (so that behavior is consistent regardless of whether we've
resolved a header directive, and so that preprocessed modules don't get marked
unavailable). We could actually do this for all `header` directives: the only
reason we mark the module unavailable if headers are missing is to give a
diagnostic slightly earlier (rather than waiting until we actually try to build
the module / load and validate its .pcm file).
Differential Revision: https://reviews.llvm.org/D33703
llvm-svn: 304515
to the original module map.
Also use the path and name of the original module map when emitting that
information into the .pcm file. The upshot of this is that the produced .pcm
file will track information for headers in their original locations (where the
module was preprocessed), not relative to whatever directory the preprocessed
module map was in when it was built.
llvm-svn: 304346
To support this, an optional marker "#pragma clang module contents" is
recognized in module map files, and the rest of the module map file from that
point onwards is treated as the source of the module. Preprocessing a module
map produces the input module followed by the marker and then the preprocessed
contents of the module.
Ignoring line markers, a preprocessed module might look like this:
module A {
header "a.h"
}
#pragma clang module contents
#pragma clang module begin A
// ... a.h ...
#pragma clang module end
The preprocessed output generates line markers, which are not accepted by the
module map parser, so -x c++-module-map-cpp-output should be used to compile
such outputs.
A couple of major parts do not work yet:
1) The files that are listed in the module map must exist on disk, in order to
build the on-disk header -> module lookup table in the PCM file. To fix
this, we need the preprocessed output to track the file size and other stat
information we might use to build the lookup table.
2) Declaration ownership semantics don't work properly yet, since mapping from
a source location to a module relies on mapping from FileIDs to modules,
which we can't do if module transitions can occur in the middle of a file.
llvm-svn: 302309
If a file search involves a header map, suppress
-Wnonportable-include-path. It's firing lots of false positives for
framework authors internally, and it's not trivial to fix.
Consider a framework called "Foo" with a main (installed) framework header
"Foo/Foo.h". It's atypical for "Foo.h" to actually live inside a
directory called "Foo" in the source repository. Instead, the
build system generates a header map while building the framework.
If Foo.h lives at the top-level of the source repository (common), and
the git repo is called ssh://some.url/foo.git, then the header map will
have something like:
Foo/Foo.h -> /Users/myname/code/foo/Foo.h
where "/Users/myname/code/foo" is the clone of ssh://some.url/foo.git.
After #import <Foo/Foo.h>, the current implementation of
-Wnonportable-include-path will falsely assume that Foo.h was found in a
nonportable way, because of the name of the git clone (.../foo/Foo.h).
However, that directory name was not involved in the header search at
all.
This commit adds an extra parameter to Preprocessor::LookupFile and
HeaderSearch::LookupFile to track if the search used a header map,
making it easy to suppress the warning. Longer term, once we find a way
to avoid the false positive, we should turn the warning back on.
rdar://problem/28863903
llvm-svn: 301592
Textual headers and builtins that are #import'd from different
modules should get re-entered when these modules are independent
from each other.
Differential Revision: https://reviews.llvm.org/D26267
rdar://problem/25881934
llvm-svn: 291644
Summary:
The module system supports accompanying a primary module (say Foo) with
an auxiliary "private" module (defined in an adjacent module.private.modulemap
file) that augments the primary module when associated private headers are
available. The feature is intended to be used to augment the primary
module with a submodule (say Foo.Private), however some users in the wild
are choosing to augment the primary module with an additional top-level module
with a "similar" name (in all cases so far: FooPrivate).
This "works" when a user of the module initially imports a private header,
such as '#import "Foo/something_private.h"' since the Foo import winds up
importing FooPrivate in passing. But if the import is subsequently recorded
in a PCH file, reloading the PCH will fail to validate because of a cross-check
that attempts to find the module.modulemap (or module.private.modulemap) using
HeaderSearch algorithm, applied to the "FooPrivate" name. Since it's stored in
Foo.framework/Modules, not FooPrivate.framework/Modules, the check fails and
the PCH is rejected.
This patch adds a compensatory workaround in the HeaderSearch algorithm
when searching (and failing to find) a module of the form FooPrivate: the
name used to derive filesystem paths is decoupled from the module name
being searched for, and if the initial search fails and the module is
named "FooPrivate", the filesystem search name is altered to remove the
"Private" suffix, and the algorithm is run a second time (still looking for
a module named FooPrivate, but looking in directories derived from Foo).
Accompanying this change is a new warning that triggers when a user loads
a module.private.modulemap that defines a top-level module with a different
name from the top-level module defined in its adjacent module.modulemap.
Reviewers: doug.gregor, manmanren, bruno
Subscribers: bruno, cfe-commits
Differential Revision: https://reviews.llvm.org/D27852
llvm-svn: 290219
Include headermaps (.hmap files) in the .cache directory and
add VFS entries. All headermaps are known after HeaderSearch
setup, collect them right after.
rdar://problem/27913709
llvm-svn: 289360
which guarantee pointers are not null. These all seem to have useful
properties and correlations to document, in one case we even had it in
a comment but now it will also be an assert.
This should prevent PVS-Studio from incorrectly claiming that there are
a bunch of potential bugs here. But I feel really strongly that the
PVS-Studio warnings that pointed at this code have a far too high
false-positive rate to be entirely useful. These are just places where
there did seem to be a useful invariant to document and verify with an
assert. Several other places in the code were already correct and
already have perfectly clear code documenting and validating their
invariants, but still ran afoul of PVS-Studio.
llvm-svn: 285985
The 'no_undeclared_includes' attribute should be used in a module to
tell that only non-modular headers and headers from used modules are
accepted.
The main motivation behind this is to prevent dep cycles between system
libraries (such as darwin) and libc++.
Patch by Richard Smith!
llvm-svn: 284797
In this mode, there is no need to load any module map and the programmer can
simply use "@import" syntax to load the module directly from a prebuilt
module path. When loading from prebuilt module path, we don't support
rebuilding of the module files and we ignore compatible configuration
mismatches.
rdar://27290316
Differential Revision: http://reviews.llvm.org/D23125
llvm-svn: 279096
Differential Revision: http://reviews.llvm.org/D19843
Corresponding LLVM change: http://reviews.llvm.org/D19842
Re-commit after addressing issues with of generating too many warnings for Windows and asan test failures.
Patch by Eric Niebler
llvm-svn: 272562
If we are processing a #include from a module build, we should treat it
as a system header if we're building a system module. Passing an optional
flag to HeaderSearch::LookupFile.
Before this, the testing case will crash when accessing a freed FileEntry.
rdar://26214027
llvm-svn: 269730
Clang performs directory walk while searching headers inside modules by
using the ::sys::fs instead of ::vfs. This prevents any code that uses
the VFS (e.g, reproducer scripts) to actually find such headers, since
the VFS will never be searched for those.
Change these places to use vfs::recursive_directory_iterator and
vfs::directory_iterator instead.
Differential Revision: http://reviews.llvm.org/D20266
rdar://problem/25880368
llvm-svn: 269661
of the file name. This is consistent with how other HeaderSearchOptions
are handled.
Due to the other inputs of the module hash (revision number) this is not
really testable in a meaningful way.
llvm-svn: 257520
Summary: It breaks the build for the ASTMatchers
Subscribers: klimek, cfe-commits
Differential Revision: http://reviews.llvm.org/D13893
llvm-svn: 250827
to enable the use of external type references in the debug info
(a.k.a. module debugging).
The driver expands -gmodules to "-g -fmodule-format=obj -dwarf-ext-refs"
and passes that to cc1. All this does at the moment is set a flag
codegenopts.
http://reviews.llvm.org/D11958
llvm-svn: 246192
- introduces a new cc1 option -fmodule-format=[raw,obj]
with 'raw' being the default
- supports arbitrary module container formats that libclang is agnostic to
- adds the format to the module hash to avoid collisions
- splits the old PCHContainerOperations into PCHContainerWriter and
a PCHContainerReader.
Thanks to Richard Smith for reviewing this patch!
llvm-svn: 242499
visible in the module we're considering entering. Previously we assumed that if
we knew the include guard for a modular header, we'd already parsed it, but
that need not be the case if a header is present in the current module and one
of its dependencies; the result of getting this wrong was that the current
module's submodule for the header would end up empty.
llvm-svn: 241953
We use findModuleForHeader() in several places, but in header search we
were not calling it when a framework module didn't show up with the
expected name, which would then lead to unexpected non-modular includes.
Now we will find the module unconditionally for frameworks. For regular
frameworks, we use the spelling of the module name from the module map
file, and for inferred ones we use the canonical directory name.
In the future we might want to lock down framework modules sufficiently
that these name mismatches cannot happen.
rdar://problem/20465870
llvm-svn: 241258
update the identifier in case we've imported a definition of the macro (and
thus the contents of the header) from a module.
Also fold ExternalIdentifierLookup into ExternalPreprocessorSource; it no longer
makes sense to keep these separate now that the only user of the former also
needs the latter.
llvm-svn: 241137
re-entering a modular header.
When we do the include guard check, we're in the visibility state for the file
with the #include; the include guard may not be visible there, but we don't
actually need it to be: if we've already parsed the submodule we're considering
entering, it's always safe to skip it.
llvm-svn: 241135
We used to have a flag to enable module maps, and two more flags to enable
implicit module maps. This is all redundant; we don't need any flag for
enabling module maps in the abstract, and we don't usually have -fno- flags for
-cc1. We now have just a single flag, -fimplicit-module-maps, that enables
implicitly searching the file system for module map files and loading them.
The driver interface is unchanged for now. We should probably rename
-fmodule-maps to -fimplicit-module-maps at some point.
llvm-svn: 239789
Victor Leschuk